Model: iCVBTW11 QSG Instruction manual - US English size: 408mm(W) x 150mm(H) Folded Size: 102 x 150 mm 157g Art paper / 1C + 1C / Straight corners Dec 19, 2019 iHome Beauty LUX POWER Model: iCVBTW11 WHATS INCLUDED:
GETTING STARTED FEATURES & FUNCTIONS Connecting the Unit Connect the included AC adapter to the DC jack located on the back of the unit and connect the other end to a working wall outlet. LUX POWER Vanity Speaker AC Adapter USB Port
(5V/1A) DC Jack
(9V/3.6A) RESET RESET TEST TEST Removable Detail Mirror Cleaning Cloth The back of the 10x magnifying Use the included cleaning cloth detail mirror has SimpleStick to keep the large surface and micro suction material for easily detail mirror smudge free. Turn on your Bluetooth device and make it discoverable by turning on Bluetooth mode. Press and hold the Bluetooth Pairing Button on the vanity speaker for 2 seconds to enter pairing mode. Select LUX POWER on your devices Bluetooth menu to connect!
Connecting to Bluetooth Press the Power Button to turn the vanity speaker ON. Vanity Speaker + Wireless Charging tape. Quick Start Guide QUESTIONS? visit www.ihome.com attaching and detaching almost anywhere. If necessary, clean SimpleStick material with office LUX POWER
USB Charging Port (1A) Connect a standard USB cable (not included) USB to charge devices Note: If no audio is playing for 15 minutes, the unit will automatically power off. 1 2 DC Jack Connect included AC adapter to power source 3 Power Button Press to turn vanity speaker ON or OFF Light Button Press to turn mirror light ON or OFF Press repeatedly to adjust light modes Bluetooth Pairing Button Press and hold to enter pairing mode Select LUX POWER on your device to connect Play/Pause/Speakerphone Button Press to play/pause Bluetooth audio Press to answer/end Bluetooth calls Press and hold to reject an incoming call Press and hold to activate Siri/Google Bluetooth Pairing LED Flashes white to indicate when unit is in pairing mode Glows solid white to indicate Bluetooth is connected Wireless Charging LED White LED indicates wireless charging status (see page 5) ADJUSTING LIGHT MODES WIRELESS CHARGING Supports:
Qi compatible phones (also works with plastic cases up to 3mm thick) Apple AirPods Place Qi compatible device face-up on the charging rest located on the base of the mirror as shown below. Make sure the center of the device is aligned over the center of the charging rest. Using the Stem Tap the stem to turn the light ON or OFF. Tap the stem repeatedly to cycle through brightness levels:
High, Mid, Low, and OFF. Using the Light Button Press the Light Button to turn the mirror light ON or OFF. Press the Light Button repeatedly to cycle through brightness levels: High, Mid, Low, and OFF. Note: Power and Light features operate separately:
Press the Power Button to access audio features including Bluetooth. Press the Light Button to access light modes and brightness levels. CHARGING VIA USB PORT Connect a standard USB cable (not included) to the USB Charging Port located on the back of the mirror. Connect the other end to your device to begin charging. Wireless Charging LED Slow blinking LED: Device is charging Rapid blinking LED: Device is not charging (reposition device)
(LED may continue to blink slowly when iOS devices are fully charged.) Solid LED: Device is fully charged CAUTION: Remove phones metal protective case before charging. Do not place magnetic or metal objects on charger during charging. Qi compatible phones with metallic looking nishes will charge normally. Note: The wireless charging process generates heat that may cause phones and chargers to be warm to the touch. This is natural for wireless charging devices. 5 4 IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or re hazards. Please read and follow all safety and operating instructions careful-
ly before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the ow of air through the ventilation openings. 3. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. 4. Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Only use the AC adapter that came with the unit. 5. Power-Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 6. Cleaning The unit should be cleaned only as recommended. See the Maintenance section for cleaning instructions. turer. 9. Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10. Damage Requiring Service The unit should be serviced by qualied service person-
nel when:
A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 11. Periods of Nonuse If the unit is to be left unused for an extended period of time, such as a month or longer, remove batteries before storage 12. Servicing The user should not attempt to service the unit beyond those methods described in the user manual. Service methods not covered in the operating instruc-
tions should be referred to qualied service personnel. 13. Magnetic Interference: This products speakers contain powerful magnets which could cause interference or damage to sensitive equipment such as hard drives, CRT televisions and monitors, as well as medical, scientic, and navigational devices. Keep this unit away from these products at all times. 14. Only use attachments/accessories specied by the manufacturer. This product is suitable for use in tropical and/or moderate climates. 15. No naked ame sources, such as lighted candles, should be placed on the apparatus. 16. WARNING: To reduce the risk of re or electric shock, do not expose this product to 17. The mains plug of power adaptor is used as the disconnect device, it shall remain rain or moisture readily operable. 18. Clean only with dry cloth. FCC INFORMATION FCC Radiation Exposure Statement Model: iCVBTW11 FCC ID: EMOICVBTW11A IC: 986B-ICVBTW11A This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. CAUTION : Exposure to Radio Frequency Radiation. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and receiver. Canada Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. WARRANTY For product support information and warranty please visit:
www.ihome.com/support 2020 SDI Technologies, Inc. All rights reserved Questions? Visit www.ihome.com 6 iCVBTW11-191219-A(EN) Printed in China Charging will begin upon contact. The Wireless Charging LED located on the front of the mirror will indicate charging status:
7. Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 8. Attachments Do not use attachments not recommended by the product manufac-
CAN ICES-3 (B)/NMB-3(B)