FCC ID: EMOB60A B60 Bluetooth Headphones

Model: B60 Serie Generic IB (English only) Color: Black text on white paper (1C + 1C) Size: 270 x 135 mm Date: Jul. 24, 2020.

(Front) Model: B60 Series Introduction Your new Bluetooth stereo headphones are designed to link with your Bluetooth enabled smartphone or music player to allow you to wirelessly listen to music and answer phone calls within the normal 10 meter (33 feet) Bluetooth operating range. Please review this manual carefully to make sure you are getting the maximum benefit from all of the features of your new headphones, and keep this manual for future reference. WIRELESS HEADPHONES Whats Included PREPARATION FOR USE 1. Controls and Indicators 1 2 3 4 5 Button (Volume Up / Skip Forward) Button (Volume Down / Skip Back) Power/Pairing/Charging LED Indicators Power/Play/Pause Button USB Charging Port AUX Jack 6 7 Microphone 2. Charging Your Headphones 1 2 3 4 5 6 7 Your Bluetooth headphones operate on a built-in rechargeable battery. Although the battery was fully charged when it left our factory, the battery can lose power even during periods of non-use. Make sure to charge the battery before using the headphones for the first time. To charge the battery connect the larger plug of the included USB charging cable to the powered USB port of a computer or a USB/AC adapter, and then connect the smaller plug to the USB charging port on the side of the right ear cup. The Charging Indicator will glow red while the headphones are charging. The indicator will turn off when the headphones are fully charged and ready to use. When fully charged the battery should provide up to 24 hours of talk time or music playing time at a normal listening level. If operated at maximum volume the music playing time will be reduced. NOTE: While charging, the headphone power will turn off to conserve battery power and minimize charging time. Computer connected to working outlet USB Adaptor

(not included) OR Computer USB port 1 USB Charging Cable B60 Headphones Detachable Audio Cable The AUX jack allows you to use your Bluetooth headphones as normal headphones so that you can listen to music on any non-Bluetooth device that is equipped with a 3.5mm headphone jack. Connect the included audio cable to the AUX jack on the right earcup of your headphones, and to the headphone jack of your auxiliary music source.Your headphones should be in the Power Off mode. Use the volume and track navigation controls on your music player as you would with any normal headphones. BC CHARGE BEFORE USE

(Back) OPERATING INSTRUCTIONS 1. First Time Power On: Auto Pairing The first time you power on the headphones, PRESS and HOLD the Power/Play/Pause Button on the right earcup for about 3 seconds until the LED flashes. The first time the headphones are powered on they will enter auto-pairing mode, indicated by flashing red and blue LEDs. a) Make sure Bluetooth is enabled on your device (check in Settings or Options). b) ekids B60 will apear on your devices Bluetooth menu. c) Select ekids B60 to complete pairing. NOTE: If your Bluetooth device asks for a Password or a PIN to complete the pairing process, enter 0000 on the keypad of your device. You are now ready to begin streaming music wirelessly from your Bluetooth device to your Bluetooth headphones. 2. Standard Power On: Auto-Linking Mode After the first time, whenever you power on the headphones, the blue LED will flash slowly indicating that your headphones are in Auto-Linking Mode (trying to re-link to a previously paired device) that is within the normal pairing range of about 33-feet. If your headphones do not find a previously paired device that is in range, the LEDs will start flashing red and blue (for new device pairing) and then the power will shut off in 3 minutes if no device is connected

(to save the battery life). 3. Manually Pairing Your Headphones With Your Bluetooth Device NOTE: Your headphones must be Off to begin the manual pairing process. With the headphones in Off mode, PRESS and HOLD the Power/Play/Pause Button on the right earcup for about 7 seconds, the LEDs will flash red and blue. Release the Power/Play/Pause Button. Follow the a-c pairing instructions in Step 1 above to complete pairing. 4. Power Off To turn the headphones Off at any time, PRESS and HOLD the Power/Play/Pause Button on the right earcup for about 5 seconds.The LED will turn red and then the power shuts off. The headphones will shut off automatically if no music plays for 60 minutes. 5. Using Your Bluetooth Headphones The following chart explains the basic functions and operations of your Bluetooth headphones. Function Turn headphones On Enter Pairing Mode Pairing Play / Pause Action Required When headphones are 'Off, press and hold the Power/Play/Pause Button for 3 seconds until the LED indicator flashes blue. When headphones are 'Off', press and hold the Power/Play/Pause Button for 7 seconds until the LED indicator alternately flashing red and blue. Make sure your Bluetooth device is 'On' and discoverable. When eKids B60 appears on your devices menu, select it to complete pairing. Short press the Power/Play/Pause Button to start playback. Short press to pause playback. Short press to resume playback. Skip to next track Press the button twice during playback. Skip to beginning of current track Press the button twice during track playing after 5 seconds. Skip to beginning of previous track Increase volume Press the button twice in the track playing the beginning 5 seconds. Press the button during playback (hold for rapid setting) Decrease volume Answer an incoming phone call End a call Transfer a call between the phone and the headphones Last number redial Siri/Google Assistant Turn headphones Off Press the button during playback (hold for rapid setting) Short press the Power/Play/Pause Button when you hear the incoming ring sound. NOTE: Music will automatically pause when you are answering a call and resume when you end the call. Short press the Power/Play/Pause Button to end the call and 'hang up'. While the call is in progress, press and hold the Power/Play/Pause Button for 2 seconds. When no call is in progress, double press Power/Play/Pause button to redial the last number. Press and hold the Power/Play/Pause button for 2-3 seconds. Reset Bluetooth/Clear all paired devices Press and hold the for 5 seconds during pairing mode. Press and hold Power/Play/Pause button for 5 seconds until the LED indicator turns red and then shuts off. Headphones will shut off automatically if no music plays for 60 minutes. FCC/IC Information This device complies with Part 15 of the FCC Rules, operation is subject to the FCC ID: EMOB60A IC: 986B-B60A following two conditions:

HVIN: B60a

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 (B)/NMB-3(B) Limited One-Year Warranty Information eKids warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, eKids will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service is required, please call Customer Service at 1-888-TOP-TOYS to obtain a Return Authorization Number and shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CDs or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will eKids or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your eKids product. For questions or comments please call our toll-free number:

Distributed by eKids, LLC 1-888-TOP-TOYS Also visit our website: www.ekids.com 1299 Main Street Rahway, NJ 07065 2 3 B60EXIB-072420-A Printed in China

Li-B60.EXv1 - GAW Jun. 04, 2020 Right

(inside side arm) Left

(inside side arm) R H V N I

B 6 0 a I C

9 8 6 B B 6 0 A F C C I D

E M O B 6 0 A M o d e l

L i

. B 6 0 E X v 1

L u c a s f i l m L d t

. L PMS 2379C Laser etch emboss

Federal Communications Commission Authorization and Evaluation Division SDI Technologies Inc. Confidentiality Request regarding application for certification of FCC ID: EMOB60A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block SCH Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual Exhibit Type Manual Sincerely, David Stetin 2020-08-12 Rev 11/20/07

SDI Technologies Inc. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RFmodule and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Production name Trademark FCC Model no. B60 Bluetooth Headphones EMOB60A iHome /

eKids Li-B60.EXv1, M1-B60 M2M3M4M5M6M7M8M9M10

(M1 M10, please refer to model no. table) Confirmed by:

David Stetin 2020-08-12

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date:2020-08-12 SUBJECT: FCC Application for (FCC ID: EMOB60A) To Whom It May Concern:

We, the undersigned, hereby authorize EMTEK(SHENZHEN) CO., LTD. at Lisa Wang on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK(SHENZHEN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, David Stetin 2020-08-12