iBT290 Eng IB (removed Aux-in cable) Size: 153mm x 120mm Printing color: Black Aug 01, 2019 P1 Model: iBT290/iBT290N Bluetooth Wireless Color Changing Dual Alarm FM Clock Radio with USB Charging instruction manual Questions? Contact Customer Service at 1-800-288-2792 Introduction iBT290 Thank you for purchasing the iHome iBT290. This product is designed to provide high quality wireless sound for your Bluetooth audio device. This instruction booklet explains the basic operation and care of the unit. Please read it carefully and keep for future reference. Maintenance Place the unit on a level surface away from sources of direct sunlight or excessive heat. Protect your furniture when placing your unit on a natural wood and lacquered nish. A cloth or other protective material should be placed between it and the furniture. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials can damage the surface of the unit. 1 Table of Contents iBT290 Meet Your iBT290............................................................................................................................................4 The Display/Setting Up the Unit............................................................................................................... 5 Setting the Time .............................................................................................................................................. 6 Setting and Using the Alarm/Operating the Alarms.................................................................7- 8 Listening to FM Radio.................................................................................................................................... 8 Usning the Unit in Other Countries......................................................................................................... 9 Color Change Mode/Dimmer Mode/Bedtime Sleep Mode....................................................... 10 Pairing Your Device Via Bluetooth .........................................................................................................11 Playing Audio Via Bluetooth ....................................................................................................................12 Using the Speakerphone/Using the Voice Control feature........................................................12 Playing Audio Via Aux-in Device ............................................................................................................13 Charging Devices with the USB Port ....................................................................................................13 Replacing and Installing Clock Backup Battery.............................................................................. 14 Troubleshooting...............................................................................................................................................15 Consumer Product Safety Guide ......................................................................................................16-17 FCC Information ..............................................................................................................................................18 Warranty..............................................................................................................................................................19 2 Included iBT290 system 100V-240V universal AC adapter iBT290 iBT290 power adapter 3 iBT290 Alarm 1 Button Set and arm/disarm Alarm 1 Alarm 2 Button Set and arm/disarm Alarm 2 Raise Volume Button Raise volume Lower Volume Button Lower volume Meet Your iBT290 Top Power/Alarm Reset Button Press to turn unit ON or OFF, reset alarm when sounding Time Set/Sleep Button Press for sleep timer Press and hold for time setting Answer Call and Forward/ Plus Settings Button Press to raise selected setting Color Button Press to cycle color settings End Call and Reverse/Minus Settings Button Press to lower selected setting Front Mode Button Press to select Bluetooth, Radio or Aux mode Micophone Play/Pause and Presets Button Play/pause Bluetooth audio, Set and select FM radio presets Bluetooth Pairing Button Press and hold to pair Bluetooth device Snooze/Dimmer Button Press to silence alarm for selected time Press to adjust brightness during standard operation
(not during alarm mode) Bottom Remove pull tab before use Backup Battery Compartment Access backup battery DC Adapter Jack Plug in AC adaptor cable and connect to outlet Back DC 7.5V 2A usb charging aux-in FM radio antenna Extend antenna for best reception (do not strip, alter or attach to other antennas) USB charging port Plug in USB cable to charge mobile device 4 Aux-in jack Connect audio cable here and to audio device headphone/aux-out jack The Display Using the iBT290 Aux mode indicator Bluetooth Pairing indicator Alarm 1 and 2 indicators Alarm is armed and will sound at set time Low Backup Battery indicator FM radio mode indicator PM indicator AM indicator Setting Up the Unit Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet. Extend FM antenna. Remove battery pull tab. CR2450 3V battery is installed for battery backup in the backup battery compartment located on the bottom of the unit. See page 13 for deatails on installing and replacing backup batteries. 5 Sleep mode indicator Wake to indicator Time display Mode/Bedtime Sleep Timer/
FM station/alarm time display FM antenna DC 7.5V 2A usb charging aux-in RESET RESET TEST TEST Setting the Time 1. Press and hold the Time Set/Sleep Button for 2 seconds. CLOCK will appear in the bottom of the display, the time will ash and a beep will sound. Press the or + Button to set the correct time (press and hold for rapid setting). Remember to set the correct AM or PM time. The AM and PM Indicators are located to the left of the time digits. Using the iBT290 2. Press the Time Set/Sleep Button. The year will ash. Press the or + Button to set the correct year. 3. Press the Time Set/Sleep Button again. The date will ash. Press the or + Button to set the correct date (press and hold for rapid setting). 4. Press the Time Set/Sleep Button again. DST ON will appear in the bottom of the display. DST ON indicates the unit is in automatic Daylight Saving Time adjust mode and will automatically adjust the time at the start and end of Daylight Saving Time in March and November. Press the or + Button to set unit to DST OFF if you are in a location that does not observe Daylight Saving Time. TIP: Press either the or Button when display is ashing during clock setting to toggle the display between 24 hour (military) and 12 hour (standard) display mode. The AM/PM indica-
tors will not appear when display is in 24 hour mode. 5. Press the Time Set/Sleep Button again (or no button press within 10 seconds) to exit the clock setting mode. 2 beeps will conrm clock setting is complete. 6 Using the iBT290 Setting and Using the Alarm This unit has a dual alarm system so you can set two separate alarms to dierent alarm times and wake to sources. Setting the Alarms Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button (
or ) for whichever alarm you are setting. 1. Press and hold the or Button until the alarm icon ashes, the alarm time ashes on the lower part of the display and a beep sounds. Press and release the or + Button to set the alarm time (press and hold for faster setting). Remember to set the correct AM or PM time. 2. Press and release the Alarm Button again to conrm the set alarm time. The current wake schedule will ash. Press and release the or + Button as needed to select 7 DAYS (alarm sounds every day), 5 DAYS (alarm sounds on week days) or 2 DAYS (alarm sounds only on weekends). 3. Press and release the Alarm Button again to conrm the alarm schedule. The wake to icon and the current alarm source will ash. Press the or + Button as needed to select to set the alarm wake-to source: BT, FM radio or Tone. To Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is detected, the alarm will default to buzzer. To Wake to FM radio: The default wake to source is the current FM radio station. Press the Alarm Button to conrm Radio as alarm source, then press and release the or + Button to set a dierent station (press and hold to scan to the next clear station). To wake to a preset station, press the Play/Pause/Preset Button to cycle to the desired preset (see page 8 for details on setting presets). To wake to Tone: Press the Alarm Button to conrm Tone as alarm source, then press and release the or + Button as needed to preview and cycle through the four tones. 4. Press and release the Alarm Button again, then press and release the or + Button to adjust the alarm volume. Note that alarm volume is stored separately from standard volume. 7 Using the iBT290 5. Press and release the Alarm Button again, then press and release the or + Button to set the color LED wake cycle: Dawn (amber fade leading up to alarm time), Flash (ashing red while alarm sounds), Glow (glowing color sequence while alarm sounds) or None (no wakeup LED eect). 6. Press and release the Alarm Button again (or no button within 10 seconds) to exit the alarm setting mode. 2 beeps will conrm alarm setting is complete. The alarm will be armed once set and the corresponding alarm icon will light up. The lower part of the display will show the earliest set alarm time. Operating the Alarms At the set time, the alarm will sound for up to one (1) hour. 1. To turn o the sounding alarm and reset it to come on at the same time the following day, press and release the Button. The alarm sound will stop but the alarm icon will remain in the display, indicating the alarm is armed. 2. Press and release the Alarm Button during normal operation (alarm is not sounding) to preview the current alarm time, arm the alarm (alarm icon is present) or to cancel it (no alarm icon). 3. Press and release the Snooze Button while alarm is sounding to temporarily silence the alarm for the set snooze time (default is 9 minutes). To adjust the snooze time: press and hold the Snooze Button during normal operation (when alarm is not sounding). The snooze time will ash on the display and 1 beep sounds. Press the or + Button to adjust the snooze time from 1 - 29 minutes. Press and release the Snooze Button again (or no button within 10 seconds). Two beeps will sound to conrm snooze setting and return unit to normal operation. 8 Using the iBT290 Listening to FM Radio Setting up the Antenna Extend the FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas. Tuning and Playing the Radio 1. Press and release the Mode Button as needed to select FM radio mode. 2. When FM mode is selected, press the or + Button to tune the radio to a desired station. The current radio frequency appears in the lower part of the display. Press and hold the or +
Button for a few seconds to scan for the next clear station. 3. To memorize a station as a preset:
A. Press the Presets Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then hold the Presets Button until the selected preset number begins ashing in the display and 1 beep sounds. B. Press the or + Button to tune the radio to a desired station. Hold briey to have the radio autoscan/search for the next clear station. C. Press the Presets Button to conrm the setting, two conrmation beeps will conrm the setting and the preset number you wish to assign. Repeat steps A-C to preset up to 6 stations. 4. To listen to a preset station, press the Presets Button to choose the desired preset. 5. Press the or Button on the unit to adjust the system volume. Using the Unit in Other Countries Dierent regions of the world use dierent FM radio frequency steps and ranges. You will need to select the one that matches the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA, or CHINA). The default setting is USA; if you live in the US, you may skip this section. 1. Make sure the unit is OFF (not playing in any mode). Press and hold the Mode Button for about 5 seconds until USA appears in the lower part of display and 1 beep sounds. Press and release the or + Button to select your region. 2. Press and release the Mode Button again (or no button within 10 seconds) to exit the radio frequency setting mode. Two beeps will conrm radio frequency setting. 9 Color Change Mode Color Change Mode can be accessed whether the unit is ON or OFF. There are 4 color settings. Press the Color Button to cycle through them. The settings are:
FADE Slow color change (default): Colors slowly fade in and out continually from one Using the iBT290 color to the next. spectrum. FAST Fast color change: colors change quickly from one to another through the color 1 COLOR Select the last color NOTE: To manually cycle to a desired color, press and release the or + Button as needed while the unit is OFF (this function is not available while the unit is ON). NONE Turns o cabinet color eect. Dimmer Mode When unit is in normal mode (no alarm is sounding), press the Snooze/Dimmer Button to cycle through display brightness settings, including OFF. Settings aect both the display backlight and cabinet LED. Bedtime Sleep Mode This unit has a Bedtime Sleep feature which gradually lowers the volume of playing audio over a set time then turns o. 1. Press and release the Time Set/Sleep Button as needed to cycle to the desired sleep setting:
120, 90, 60, 30, 15 minutes or O (cancels sleep mode and turns unit o). 2. To set sleep volume, press the or Buttons. Sleep volume does not eect normal or alarm 3. During sleep mode, press the Time Set/Sleep Button to view the sleep time remaining. Press again to set sleep to the next lowest setting. 4. To cancel sleep mode and turn the unit o, press and release the Button at any time during volume settings. sleep mode. 10 Pairing Your Device Via Bluetooth Whenever AC power is connected, the iBT290 will attempt to autolink to a previously paired device. Using the iBT290 1. Turn on your Bluetooth device and make it discoverable by turning on Bluetooth mode (check in Options or Settings). 2. Press the Button to turn on the iBT290. 3. Press the Mode Button to cycle to Bluetooth mode, indictaed by BT on the display 4. Press and hold the Pairing Button on top of the iBT290 for 2 seconds. The iBT290 will beep and PAIR will ash on the display, indicating the iBT290 is in pairing mode. iHome iBT290 should appear in your devices Bluetooth menu. Select iHome iBT290 to connect it. If prompted for a passcode, enter 1234 on your devices keypad. 5. If pairing is successful, PAIRED will appear on the display,2 beeps will sound and the cabinet will ash blue twice, indicating the iBT290 is ready to play music. There should also be an indication on your device. If no device is successfully paired within 3 minutes the iBT290 will default to previous mode. Once the iBT290 is paired to a device, it will attempt to autolink when the device is within range (about 33 feet). 11 Playing Audio Via Bluetooth 1. Press the Button to turn the unit ON. 2. Press and release the Mode Button as needed to select Bluetooth mode (BTappears on the display). Using the iBT290 3. Press the Play/Pause/Presets Button on the unit to play audio from your linked Bluetooth device. 4. Press the or + Buttons to go to the previous or next track. 5. Press the or Buttons to adjust the volume on the unit. 6. When done listening, press the Button to turn the unit o. Using the Speakerphone feature NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. 1. When a call is received, playing music is muted to hear the ring tone. CALL will ash on the display and the cabinet will ash green. Press the Talk Button to answer the call; press and hold the End Button to ignore the call. For call waiting function, press the Talk Button to place a currently active call on hold and answer a new call; press the Talk Button to switch between the calls. 2. When a call is completed, press the End Button to end the call and resume previous function. The cabinet will ash red and END will appear on the display. Using the Voice Control feature NOTE: The unit must be powered on and linked to an iOS or Android Bluetooth device to use Voice Control. Press and hold the Button for 2 seconds and wait for beep to activate voice control with Siri or Google Now. Voice control requires an active internet connection on connected Bluetooth device with iOS 10 and Android 4.1 and later. When activated, the speaker microphone acts as an extension of the microphone in your smartphone to make/take calls, enable you to ask Siri/Google Now to play music and more. 12 Playing your Aux Audio Device 1. Connect one end of a standard aux audio cable (not included) to the aux jack on the back of Using the iBT290 the unit and connect the other end to the headphone jack or aux-out jack on your audio device. 2. Press and release the Mode Button as needed to put the unit in Aux-in mode. 3. Use controls on your device to play and pause audio and to navigate tracks and menus. 4. Press the or Buttons to adjust the unit volume. 5. To turn o the unit, press and release the Button. Make sure to turn o your audio device, too. DC 7.5V 2A usb charging aux-in Mobile Phone PC/Tablet Game Devices iPod Laptop MP3/MP4 Charging a Device with the USB Port A 1 Amp USB port is located on the back of the unit for charging devices while the unit is connected to AC power. Connect one end of a compatible USB cable (not included) into the standard USB port on the unit and the other end into the device you wish to charge. Some devices require proprietary USB charging ports or cables. Monitor the charging status of your device. If the device does not charge, you will need to use the charger that came with your device. NOTE: Unit must be plugged into working outlet to charge devices DC 7.5V 2A usb charging aux-in 13 Using the iBT290 Replacing and Installing Clock Backup Battery Note: The CR2450 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption. The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out. The battery backup circuit requires one CR2450 lithium battery, included. When the backup battery is getting weak the Low Backup Battery Indicator will begin ashing in the display. When you see this ashing indicator you should replace the backup battery as soon as possible. Purchase a replacement CR2450 battery, available wherever batteries are sold, and follow steps 1 through 4 below to install the replacement battery. To replace the backup battery:
IMPORTANT: When replacing the backup battery be sure to have the unit connected to the AC outlet to maintain all of your settings, otherwise it will be necessary to reset the time and alarm time after the battery is replaced. 1. Place unit face down. Locate the battery backup compartment found on the bottom of the unit. 2. Use a Phillips screwdriver to open the battery compartment cover. Remove the cover and remove the exhausted CR2450 battery. 3. 4. Replace the battery compartment cover and screw the compartment door back in place. Do not overtighten. Conrm that the Insert a fresh CR2450 battery in the backup battery compartment with the + side facing up, as illustrated. Replacing Backup Battery backup battery indicator is not ashing in the display. Note: Make sure you dispose of battery properly (see your local regulations). WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, re,or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metalobjects, mix with used or other battery types, or store with hazardous or combustible materials. Store incool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal. WARNING Keep new and used batteries away from children. Do not ingest the battery, Chemical Burn Hazard This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. CAUTION-Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type following the diagram above. 14 Unit doesnt respond (no sound) Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT290. Make sure the Power is ON. Make sure volume is up on your Bluetooth device and on unit. Troubleshooting Unit doesnt respond (locked up or frozen) The unit may need to be reset. To do so, unplug the unit from power source and remove the backup battery. Let unit stand for 2 minutes. Re-install backup battery and connect unit to power source. You will need to reset the clock, radio, and any other setting s. Trouble pairing device/computer with iBT290 Bluetooth implementation varies depending on your devices hardware and operating system. Please see our website for updates on pairing. When you power ON the unit, it will automatically link with the last previously paired Bluetooth device if the device is still within range (about 33 feet). Make sure your device is working properly. Check your devices manual for details on Bluetooth pairing and linking. To clear all Bluetooth devices, press and hold the Bluetooth Button for 6 seconds. A long beep will sound. For further information and to see the latest instructions, visit www.ihome.com/support 15 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or re hazards. Please read and follow all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instruc-
tions and on the unit. 1. Water and Moisture The unit should not be used near water. For example: near a bathtub, wash-
bowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the ow of air through the ventilation openings. 3. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. 4. Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Only use the AC adapter that came with the unit. 5. Power-Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 6. Cleaning The unit should be cleaned only as recommended. See the Maintenance section for cleaning instructions. 7. Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 8. Attachments Do not use attachments not recommended by the product manufacturer. 16 9. Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 11. Damage Requiring Service The unit should be serviced by qualied service personnel when:
A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12. Periods of Nonuse If the unit is to be left unused for an extended period of time, such as a month or longer, remove batteries before storage 13. Servicing The user should not attempt to service the unit beyond those methods described in the user manual. Service methods not covered in the operating instructions should be referred to qualied service personnel. 14. Magnetic Interference: This products speakers contain powerful magnets which could cause interference or damage to sensitive equipment such as hard drives, CRT televisions and monitors, as well as medical, scientic, and navigational devices. Keep this unit away from these products at all times. 15. Only use attachments/accessories specied by the manufacturer. This product is suitable for use in tropical and/or moderate climates. 16. No naked ame sources, such as lighted candles, should be placed on the apparatus. 17. WARNING: To reduce the risk of re or electric shock, do not expose this product to rain or 18. Do not dispose of batteries in the household trash or re. 19. The mains plug of power adaptor is used as the disconnect device, it shall remain readily opera-
moisture ble. 20.Clean only with dry cloth. 21. Attention should be drawn to the environmental aspects of battery disposal. 17 FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. iBT290 FCC ID: EMOIBT290N IC: 986B-IBT290N This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Rules. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. 18 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to rst return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verication of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modied or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CDs or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its aliates, contractors, resellers, their ocers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost prots, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product. iBT290-190801 - D (EN) Printed in China 2019 SDI Technologies, Inc. All rights reserved Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free