iBT29 - QSG (US English) Size: 408 x 150 mm (folded: 102 x 150 mm) Date: Mar. 5, 2021. Model: iBT29 Dual Alarm Clock
+ USB Charging with FM Radio and Speakerphone FEATURES & FUNCTIONS TOP PANEL Mode Button Time Set/Sleep Button Color Mode Button Presets/Play/Pause/Voice Control GETTING STARTED Step One Connecting the Unit Connect the included AC adapter to the DC jack located on the back of the unit and connect the other end to a working wall outlet. RESET RESET TEST TEST Alarm 1 Alarm 2 Volume Up Volume Down Step Two Setting Your Clock Power/
Alarm Reset End Call/
Minus Settings Answer Call/
Plus Settings Button Snooze/Display Dimmer BACK PANEL BOTTOM PANEL Bluetooth Pairing USB Charging Port (5V/1A) FM Antenna DC Jack
(7.5V/2000mA) AUX-IN Remove before use Backup Battery Compartment Pull Tab
(remove before use) DISPLAY ICONS Time/Alarm Time/Radio Frequency Display SETTING THE ALARM This unit features dual alarms which can be set to different times and alarm sources. Each is set in the same way. Instructions are given as Alarm Button; use Alarm 1 or Alarm 2 to set respective alarms. Each step must be completed while display is ashing or setting will time-out. 1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon ash. A beep sounds. 2. Press the or + Buttons to adjust the alarm time to the desired time
(hold for rapid setting). Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of the display. 3. Press the Alarm Button to conrm the alarm time setting. The wake-to source will ash. 4. Press the or + Buttons to select the desired wake-to alarm source:
Bluetooth, FM radio or tone:
Wake to Bluetooth: Wake to the currently linked Bluetooth device. If no device is detected, the alarm will default to tones. Wake to FM radio: Press the Alarm Button to conrm. Press the Presets Button to select an FM preset to wake to, or press the or +
Buttons to select a station. Wake to Tone: Press the Alarm Button to conrm. Press the or +
Buttons to select a wake-to tone (Tone 1 -Tone 4). 5. Press the Alarm Button to conrm wake-to source. 6. Press the or + Buttons to adjust the alarm volume. 7. Press the Alarm Button to conrm alarm volume and enter wake-to light selection. 8. Press the or + Buttons to select the desired wake-to light mode:
Slow fade, Fast Change, One Color (selects current color), Pulse to Music, Sky Gradient or Off (no change to light mode that is active when alarm sounds). 9. Press the Alarm Button to conrm the alarm settings and exit alarm setting mode. 2 beeps will conrm alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed. 10. To turn off a sounding alarm and reset it to come on the next day at the same time, press the Power/Alarm Reset Button or the associated alarm button (Alarm 1 Button or Alarm 2 Button). Press the desired Alarm Button to preview the alarm time and to turn the alarm ON (alarm icon on display) or OFF (no alarm icon). 2 3 Press and hold the Time Set Button until the display ashes. Press the or + Buttons to adjust time and tap Time Set to conrm. All done!
Step Three Bluetooth Pairing/Playing Audio Turn on your Bluetooth device and make it discoverable by turning on Bluetooth mode. When the unit is ON, press the Mode Button on the iBT29 until BLUETOOTH appears on the display. Press and hold the Bluetooth Pairing Button on the back of the unit for 2 seconds. Select iHome iBT29 on your devices Bluetooth menu to connect!
Press the Play/Pause/Presets Button and the or + Buttons to play, pause, and navigate tracks. Press the or Buttons to adjust the volume on the unit. You may need to adjust the volume on your device, too. 2s iHome iBT29 Quick Start Guide Questions? Contact Customer Service at 1-800-288-2792 For warranty visit:
www.ihome.com/support PM/AM Indicators Mode:
(Aux, Bluetooth, FM Radio) Low Backup Battery Indicator Bluetooth/
Pairing Indicator Color Mode: Fade, Fast, Color, Pulse, Sky, Off Alarm Active Indicator Sleep Mode Set Wake-to 1 SNOOZE/DISPLAY DIMMER 1. To program Snooze, press and hold the Snooze/Display Dimmer Button for 2 seconds during normal operation (when no alarm is sounding). FM PRESETS The unit allows you to store up to 6 FM radio station presets:
1. Press and release the Mode Button as needed until the FM indicator icon 2. Press the or + Buttons to select the desired snooze time (between 01 and appears on the display. 29 minutes). 3. Press the Snooze/Display Dimmer Button to conrm Snooze setting. While the alarm is sounding, press the Snooze/Display Dimmer Button to temporarily silence the alarm for the set duration (9 minutes is the default). To adjust the brightness of the display, press the Snooze/Display Dimmer Button during normal operation (when no alarm is sounding) to cycle through the brightness display settings, including OFF. 2. Press and release the Play/Pause Presets Button to select one of the six FM Presets (P1-P6). 3. Press and hold the Play/Pause Presets Button. The FM frequency will appear on the display. Press the or + Buttons to tune the radio to the desired station. Press the Play/Pause Presets Button again to save selected station. 4. To listen to a preset FM station at any time, turn on FM radio mode and press the Play/Pause Presets Button to cycle to the desired preset. SLEEP MODE Sleep to the current sound source for a set time before turning the unit off:
1. To set Sleep time, press and release the Sleep Button to cycle to the desired sleep duration: 120, 90, 60, 30 or 15 minutes or OFF (turns the unit off). The sleep icon will appear on the display. 2. Press the or Buttons to adjust the sleep volume on the unit. Note that the sleep volume setting is stored separately from other volume settings. When Sleep mode is active, press and release the Sleep Button to display remaining sleep time. COLOR CHANGING MODE Press and release the Color Mode Button as needed to cycle to the desired color mode light setting. Indicators on the display show the current light mode for 5 seconds:
SLOW FADE: Gradually fades from one color into the next FAST:
Fades quickly from color to color 1-COLOR: Pauses on the last color from Fast Change mode PULSE:
Pulses to the beat of music if volume is up SKY:
Matches color of the sky at the current time of day OFF:
Turns cabinet lights OFF FM RADIO (EXTEND ANTENNA FOR BEST RECEPTION) 1. Press and release the Mode Button as needed until the FM indicator icon and current FM radio frequency appear on the display. 2. Press the or + Buttons to tune the radio to the desired station (hold to scan for the next clear station). USING SPEAKERPHONE (IN BT MODE) NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. When a call is received, playing music is muted to hear the ring tone and CALL will ash on the display. Adjust call volume on your device and/or on the unit as needed. Press to answer the call; press to ignore the call or to end an active call. Press to answer a second call and place the rst on hold (press again to switch between calls). USING VOICE CONTROL (IN BT MODE) NOTE: The unit must be powered on and linked to an iOS or Android Bluetooth device to use Voice Control. Press the Voice Control Button and wait for beep to activate voice control with Siri or Google Assistant. Voice control requires an active internet connection on connected Bluetooth device with iOS 10 and Android 5.0 and later. When activated, the speaker microphone acts as an extension of the microphone in your smartphone to make/take calls, enable you to ask Siri/Google Assistant to play music and more. CHARGING DEVICES VIA USB PORT To charge your device, connect a USB cable (not included) to the USB port on the back of the unit and connect the other end to the charging port on your device. Note: Unit must be plugged into a working outlet to charge devices. MAINTENANCE Place the unit on a level surface away from sources of direct sunlight or excessive heat. Protect your furniture when placing your unit on a natural wood and lacquered nish. A cloth or other protective material should be placed between it and the furniture. BATTERY BACK-UP The battery backup will maintain clock settings in the event of a temporary power interruption (the display is NOT maintained). It will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out. When the Low Backup Battery Indicator ashes in the display, you should replace the backup battery as soon as possible. TO INSTALL/REPLACE THE BACKUP BATTERY:
IMPORTANT: Be sure to have the unit connected to the AC outlet to maintain all of your settings, otherwise it will be necessary to reset the time and alarm time after the batteries are replaced. 1. Use a Phillips screwdriver to unscrew the battery door located on the bottom of the unit. Remove the battery door. Remove the exhausted battery. 2. Insert 1 fresh CR-2450 battery into the backup battery compartment. Make sure the + sign is facing you (see illustration). 3. Replace the battery door and screw shut. Do not over-tighten. Conrm that the backup battery indicator is not ashing in the display. WARNING Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. Do not use this product near water. 2. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. 3. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 4. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. 5. Only use attachments/accessories specied by the manufacturer. 6. Unplug this product during lightning storms or when unused for long periods of time. 7. Damage Requiring Service This product should be serviced by qualied service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally. IMPORTANT SAFETY INSTRUCTIONS (CONTINUE) 8. No naked ame sources, such as lighted candles, should be placed on this product. 9. Attention should be drawn to the environmental aspects of battery disposal. Many electronics retailers now recycle batteries and other electronic components at no charge. To nd a drop-off location near you, visit www.call2recycle.com 10. This product is suitable for use in tropical and/or moderate climates. WARNING:
- To reduce the risk of re or electric shock, do not expose this product to rain or
- Do not dispose of batteries in the household trash or re.
- The mains plug of power adaptor is used as the disconnect device, it shall remain moisture. readily operable. FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformit. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Tout changement ou modication non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur utiliser l'quipement. CAN ICES-3(B) / NMB-3(B) 4 5 6 iBT29BX-030521-B Printed in China