FCC ID: EMOB14A Bluetooth Earbuds

FRONT BACK XX-B14 IB (English) Size: 120 x 150 mm Printing color: Black (1C + 1C) Material: 85 gsm WF paper Apr. 15, 2021 CHARGING THE EARBUDS Left MFB Right MFB Model: Ri-B14BM.EXV1, M1 Bluetooth Earbuds CHARGE BEFORE USE USB AC adaptor

(not included) USB-C charging cable

(included)

- Press and hold either Multi-Function Button (MFB) for 2 seconds to turn the earbuds ON.

- Press and hold either Multi-Function Button for 5 seconds to turn the earbuds OFF. POWER ON/OFF BLUETOOTH PAIRING

- When the earbuds are ON, they will automatically enter pairing mode.

- Select ekids B14 on your Bluetooth-enabled device to connect.

- A voice prompt will sound to indicate pairing is complete. Earbuds will automatically connect to your Bluetooth device whenever it is in range.

- To reset Bluetooth, press and hold the MFB (left or right) for 10 seconds. MULTI-FUNCTION BUTTON Speakerphone Bluetooth Audio Answer call/End Reject call Short press MFB Long press MFB Voice Assistant ON/OFF Press MFB 3x Play/Pause Short press MFB Volume Up Press LEFT MFB for 2 sec Volume Down Press RIGHT MFB for 2 sec Next Track Press LEFT MFB 2x Previous Track Press RIGHT MFB 2x LED INDICATORS Earbud Charging Charging Solid Blue LED Charging Flashing Red LED Fully charged LED OFF Fully charged Solid Red LED To prevent possible hearing damage, do not listen at high volume levels for long periods. FCC ID : EMOB14A IC : 986B-B14A HVIN : B14a FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B) / NMB-3(B) ISED statements This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. This device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences dexposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur lexposition aux RF et la conformit. Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler le droit de lutilidateur utiliser l'quipement. WARNING: Earbuds and case may present a choking hazard or cause other injury to small children. Keep away from small children. For your safety, do not use earbuds if they would prevent you from hearing warning sounds, such as while riding a bike, crossing the street, etc. ONE YEAR LIMITED WARRANTY For product support and warranty please visit: www.ekids.com/support Questions? Visit www.ekids.com 2021 SDI Technologies, Inc. All Rights Reserved. iHome is a registered trademark of SDI Technologies Inc., used under license. B14_041521-A Printed in China Case Charging THIS IS NOT A TOY.

CHARGE BEFORE USE TRUE WIRELESS EARBUDS WITH CHARGING CASE CHARGE BEFORE USE 6 Hours of Total Music Playtime*

Calls Rechargeable Case Adds 2-3X Extra Charges USB Type-C TRUE WIRELESS EARBUDS WITH CHARGING CASE

*6 Hours of Total Music Playtime with a Single Case Charge Calls Rechargeable Case Adds 2-3X Extra Charges USB Type-C Charging Cable Included 6 Hours of Total Music Playtime*

Calls Rechargeable Case Adds 2-3X Extra Charges USB Type-C 6 Hours of Total Music Playtime*

Calls Rechargeable Case Adds 2-3X Extra Charges USB Type-C Distributed by eKids, LLC. 1299 Main Street, Rahway, NJ 07065. MANUFACTURED IN CHINA. questions? www.eKids.com SPECS:

BT Distance: 10M - Earbuds Battery Capacity: 30mAh - Charging Case Battery Capacity: 300mAh Playing time: 6 hours - Earbuds Recharge Time: 90 minutes - Charging Case Charge Time: 2 hours Impedance: 32 ohm Driver unit: 10mm - Frequency response:

20Hz 20Khz - Sensitivity: 105dB - +/-3dB THIS IS NOT A TOY. BATMAN and all related characters and elements & DC Comics. WB SHIELD: & WBEI. (s21) Ri-B14BM.EXv1 0 92298 95305 2 TRUE WIRELESS EARBUDS WITH CHARGING CASE TRUE WIRELESS EARBUDS WITH CHARGING CASE TRUE WIRELESS EARBUDS WITH CHARGING CASE CHARGE BEFORE USE iHome is a registered trademark of SDI Technologies Inc., used under license. Bluetooth is a registered trademark of Bluetooth SIG Inc. Bluetooth technology is incorporated under license from Bluetooth SIG Inc. PRODUCT: Bluetooth True Wireless Earbuds with Charging Case. WARRANTY: 1 year limited warranty. Details inside. Valid only in U.S.A. CONTENTS: Bluetooth Earbuds, Charging Case, USB Type-C Charging Cable. CONTAINS: 30mAh & 300mAh non-replaceable, built-in rechargeable batteries. Product specifications and colors may vary from photo. Packaging should be kept as it contains important information. This product supports Bluetooth (1.1, 1.2, 2.0 and 2.1 + EDR) wireless technology enabled devices with A2DP AVRCP, and secure simple pairing profiles. FCC ID : EMOB14A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CHARGE BEFORE USE RUNNING CHANGE AW

* ADDED FCC TEXT KIDdesigns Rahway, NJ Project:

Ri-B14BM.EXv1 Designer:

RD GB Description:

CLOSED BOX 100L x 35W x 170H (mm) Version:

5 of 5 Created Date:

Revision Date:

05.14.21 00.00.00 The information contained herein including, but not limited to, the products, renderings, concepts, and designs comprise intellectual property of KIDdesigns, Ins. and shall be kept confidential and shall not be used or disclosed by the recipient without the authority of the KIDdesigns, Inc.

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: EMOB14A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block SCH Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual External Photos Internal photos Setup photo Exhibit Type Manual External Photos Internal photos Setup photo Sincerely, David Stetin 2021-05-18 Rev 11/20/07

Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RF module and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Production name FCC ID Model no. Bluetooth Earbuds EMOB14A Ri-B14BM.EXV1, M1B14 M2M3M4M5M6M7M8M9M10

(M1M10, please refer to model no. table) Model: M1 554 M2M3M4M5M6M7M8M9M10

(M1 M10, please refer to model no. table) Model no. table Part of model

Number of digit(s) Description M3 1

. Or blank M4 1 U for Europe version Or blank M1 2 to 3 M2 2 2 to 3 digits alphabets combination by a Z for brand 1 to 2 digits alphabets combination by a Z special character version Or blank M5 1 to 2 M6 1 M7 M8 1 to 2 1 to 4 0-9 for year version Or V0 V9 for year version M for Movie version brand Or blank X for no sound chip Or E for Sound chip with speech or sound effect Or M for sound chip with Music E for English content Or F for English &

French Or 3 for 3 language version Or 5 for 5 languages version Or 11 for Europe version with 11 languages M10 1 i for inner carton required Or z for direct to consumer on-line packaging Or OL for Amazon packaging Or blank M9 2 AK for Walmart exclusive Or AP for Apple exclusive Or KS for Kohls exclusive Or TG for Target exclusive blank Confirmed by:

David Stetin 2021-05-18

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2021-05-18 SUBJECT: FCC Application for (FCC ID: EMOB14A) To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv at EMTEK(DONGGUAN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK(DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, David Stetin 2021-05-18