FCC ID: EMOB24A Bluetooth Microphone

B24 IB (English) Size: 165 x 180 mm Printing color: Black 85gsm WF paper, 1C + 1C May 5. 21. Model: Di-B24EN.EXv1M Series Bluetooth Karaoke Microphone with EZ Link Technology Questions or Comments For questions or comments regarding this or other eKids products, please visit our website: www.ekids.com Maintenance It is important to keep the unit as dry and clean as possible. Clean the unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials are not recommended, as they may damage the surface of the case. is Limited 1 Year Warranty Information ekids warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, ekids will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service required, please contact Customer Service at ekids.com/support to obtain a Return Authorization Number and shipping instructions. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CDs or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will ekids or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your ekids product. Questions? Visit www.ekids.com 2021 All Rights Reserved. FCC ID: EMOB24A IC: 986B-B24A HVIN: XX-B24a FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CAN ICES-3 (B)/NMB-3(B) Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If problems persist, please do not attempt to repair unit; see warranty for factory service. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself. Doing so may damage the unit and will void your warranty. Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com CAUTION The battery used in this device may present a risk of fire, explosion or chemical burn if mistreated. Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance. Always confirm that the temperature is 5C 35 C (41 - 95 Fahrenheit) before you charge the battery. Leakage or deterioration of the battery may occur if this warning is not heeded. Never expose the battery to any liquid. Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep the battery out of the reach of infants and small children. For additional information about the EZ Link feature and app, please scan the QR code to match your product:

B24-043021-A(EN) Printed in China Disney Princess Encanto Frozen Charging The Battery:

Installing EZ Link Setup App Charge via USB AC adaptor, computer USB port, or other powered USB port Use the EZ Link Setup app to access your favorite Disney playlists USB Adaptor

(not included) OR Computer connected to working outlet Computer USB port 1. Connect the included micro USB cord to the micro USB charging port on the back of the unit. 2. Connect the standard USB plug end of the cord to a power USB port on a computer or other USB charging device. Controls SFX EZ Link Volume Down/

Reverse

(press and hold to skip track) Light Show/

Bluetooth Pairing Echo Vocal Effects Volume Up/Forward

(press and hold to skip track) Play/Pause This unit ships in Demo Mode for in-store demonstration purposes. When ready to play, slide the ON/OFF/MIC Switch on the side of the unit to ON Mode. the app. Connecting to Bluetooth Turn on your Bluetooth device and enable Bluetooth mode

(check in Options or Settings). Press and hold the Bluetooth Pairing Button on the microphone Using your Bluetooth device, select the Bluetooth pairing name to enter pairing mode. for your product:

- For Disney Princess: EZ-Link B24DP

- For Encanto: EZ-Link B24EN

- For Frozen: EZ-Link B24FR A tone will sound to confirm once your device is paired. Put your Bluetooth device in play mode to play audio. Use the Forward, Reverse and Play/Pause buttons on the microphone to navigate tracks. on a variety of different music streaming services. This function will need to be activated before use. To set up the app:

Download the free EZ Link Setup app from the Apple Store or Google Play, and install it on your Bluetooth-enabled iOS or Android device. Make sure your Bluetooth device is powered on and connected to the microphone. Follow the prompts in the EZ Link Setup app to choose a preferred music streaming service, and complete setup. Keep the EZ Link Setup app open and running on your Bluetooth enabled device to use the EZ Link feature seamlessly. Using EZ Link Button Once the app is enabled, use the EZ Link Button on the microphone to access Disney playlists:

Press the EZ Link Button once to connect to your selected streaming service, and enjoy a custom Disney playlist themed to your product. Press and hold the EZ Link Button to connect to the Disney Hits playlists, and enjoy even more great music!

Note: Product must be paired to an iOS or Android device that is running the EZ Link Setup app. It may take a few seconds to connect to your streaming service and playlist. Some streaming services require you to press Play on your Blueooth device. No user information is gathered when using If the unit does not respond:

Make sure unit is completely charged. To re-pair your device, press the Bluetooth Pairing Button on the front of the unit. Note: The rechargeable battery can be replaced only by eKids Consumer Repair Department. App Troubleshooting:

If you press the EZ Link Button, but a playlist does not open:

- Confirm your Bluetooth device is connected to the unit.

- Make sure the EZ Link Setup app is installed and running on your Bluetooth device.

- Make sure the EZ Link Button is enabled (via EZ Link Setup app). For further information and to see the latest instructions, visit www.ekids.com

Di-B24 series Model info GAW Feb. 26, 2021. Model number and Date Code tampo XXXXXX = 6 digits date code Printing color: White Model: Di-B24DP.EXv1 XXXXXX Model: Di-B24EN.EXv1M XXXXXX Model: Di-B24FR.EXv1 XXXXXX Model: Di-B24EN.EXv1M XXXXXX FCC ID: EMOB24A IC: 986B-B24A HVIN: B24a Charging Voltage: DC 5V, 500mA Disney eKids, LLC 1-800-288-2792 www.ekids.com iHome is a registered trademark of SDI Technologies Inc., used under license. Made in China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) Embossed 0.3 mm

SDI Technologies Inc. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RFmodule and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Production name Trademark FCC ID Model no. Bluetooth Microphone eKids EMOB24A Di-B24EN.EXv1M M1 B24 M2M3M4M5M6M7M8M9M10

(M1M10, please refer to model no. table) Confirmed by:

David Stetin 2021-06-03

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2021-06-03 SUBJECT: FCC Application for (FCC ID: EMOB24A) To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv at EMTEK(DONGGUAN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK(DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, David Stetin 2021-06-03

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: EMOB24A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual External Photo Internal photo Setup photo Exhibit Type Manual External Photos Internal photos Setup photos Sincerely, David Stetin 2021-06-03 Rev 11/20/07