iHV310 - QSG (English only) Size: 260 x 160 mm (unfold), 130 x 160 mm (folded) Color: 1C + 1C Material: white Art paper Jun. 4, 2018 Back Cover Front Cover FCC ID: EMOIHV310 FCC Information This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read and follow all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. Water and Moisture The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Cleaning The unit should be cleaned only with dry cloth. Do not use solvents, etc Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Damage Requiring Service The unit should be serviced by qualified service personnel when:
A. objects have fallen into or liquid has been spilled into the enclosure. B. the unit has been exposed to rain. C. the unit has been dropped or the enclosure damaged. D.. the unit exhibits a marked change in performance or does not operate normally Only use attachments/accessories specified by the manufacturer. For warranty information:
visit https://www.ihome.com/support iHv310-051718-A Printed in China iHV310 - QSG (English only) Front Cover Quick Start Guide Bluetooth Wireless Speaker Model: iHv310 Whats Included:
Bluetooth Wireless Speaker USB Charging Cable Questions? Visit www.iHome.com/support or call 1-800-288-2792 Toll Free CHARGE BEFORE USE BC GETTING STARTED BLUETOOTH Charging your speaker Speaker must be charged before use (about 3 hours). Connect small plug of the included USB charging cable to USB port located on the left bottom side of the speaker and connect the other end to a powered USB port. Indicator will glow red while charging and turn off once charged. Speaker should provide about 4 hours of audio when fully charged. Basic Controls & Functions Left Side Pairing establishes a unique communication connection between your Bluetooth device and the speaker. Once paired, you will be able to stream audio wirelessly to your Bluetooth Wireless Speaker. 1 When the speaker is powered ON it enters auto-link mode, searching for a previously connected Bluetooth device. If none is found, the unit switches to auto-pairing mode. The LED indicator beside the USB port will flash blue and tones will sound. 2 Turn on Bluetooth mode on your device (under Settings, iHome iHv310 Connections or similar). 3 Select iHv310 on your devices menu of Bluetooth devices. When pairing is successful, the LED will turn solid blue. If prompted for a password, enter 0000 on your device. You can now begin to stream audio and calls from your device. The LED will slowly flash blue when audio is playing. Charging indicator 4 Press Play/Pause/Call Button to play/pause/resume Bluetooth Aux-in jack USB Charging Port Right Side ON/OFF switch Short press previous track Long press lower volume Short press play/pause/resume audio Short press answer/end calls Short press next track Long press raise volume Short press Switch between Bluetooth and Aux-in modes Press and hold 6 seconds clear Bluetooth pairing record audio. Press and hold << or >> Buttons to adjust speaker volume. 5 To pair other devices, press and hold the M Mode Button for 3 seconds to disconnect current device. Pair the new device per steps above. SPEAKERPHONE Press the Play/Pause/Call Button to answer or end a call. Press and hold for 2 seconds to decline/ignore an incoming call. AUX-IN Connect a standard 3.5 mm audio cable (not included) to the aux-in jack located at the left bottom of the speaker under the water resistant cover and connect the other end to the headphone jack on your audio device. Power on the speaker. The LED indicator will slowly flash blue. Press the Mode Button as needed to switch from Bluetooth to Aux mode. NOTE: While using Aux-in, Bluetooth connection is disabled and media playback and volume adjustment must be controlled using your audio device. Inside page FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in public exposure condition without restriction.