iBTW41 - QSG (English) Size: 700 x 160 mm (unfold), 140 x 160 mm (folded) Color: 1C + 1C material: 157gsm, art card, 1C + 1C, April 14, 2021-v1 Front Cover Model: iBTW41 iBTW41 unit AC adapter Whats Included:
Top Meet Your iHome TimeBoost iBTW41 TIMEBOOST Bluetooth Speaker + Wireless Charger Wireless Charging Pad
iHome iBTW41 Quick Set-Up:
Step One Connecting the Unit Connect the included AC adapter to the DC jack located on the back of the unit and connect the other end to a working wall outlet. Step Two Bluetooth Pairing Turn on your Bluetooth device and make it discoverable by turning on Bluetooth mode. Press the Power Button on the iBTW41. Press and hold the Bluetooth Pairing Button on the back of the iBTW41 until the Blueooth Pairing Icon ashes to indicate the unit is in pairing mode. Select iHome Timeboost on your devices Bluetooth menu to connect!
Step Three Setting Your Clock Press and hold the Time Set Button until the display ashes. Press the or + Buttons to adjust selections and tap Time Set to conrm (make sure you set the correct AM/PM time). Do this for time, year, month and date. Daylight Savings Time:
By default, the DST Switch is set to Auto and will automatically adjust the time in March and November. Tip: Press the Alarm 1 Button during clock setting to toggle the clock between 12/24 hour display modes. DC 9V/3.0A The Display Bluetooth Mode Wireless Charging Bluetooth Pairing Icon PM Indicator Using Qi Wireless Charging This unit will wirelessly charge Qi compatible wireless charging phones. Place Qi compatible device face up on charging pad. Check the lightning icon on the iBTW41 display for charging status:
Slow blinking icon: Device is charging properly. Solid icon: Device is charged. Rapid blinking icon: Device is not charging properly. Reposition device. Note: The lightning icon may continue to blink slowly when iOS devices are fully charged. CAUTION: Remove metal protective or magnetic case from phone before charging. When charging phone, do not place magnetic-striped or other metal objects on the charger. Doing so could damage the object or this unit. Qi compatible phones with metallic looking nishes will charge normally. The PM indicator is on the left side of the display. There is no AM indicator. Alarm 1 Alarm 2 Low Battery Setting and Using the Alarms This unit features dual alarms which can be set to different times and alarm sources. Each is set in the same way. Instructions are given as Alarm Button; use Alarm 1 Button or Alarm 2 Button to set respective alarms. Note: Each step must be completed while display is ashing or setting will time-out with any changes saved. 1. Press and hold the Alarm Button for 2 seconds until the display ashes. A beep sounds. 2. Press the or + Buttons to adjust the alarm time to the desired time (hold for rapid setting). Make sure you set the correct AM/PM alarm time. The PM indicator appears to the left of the display. 3. Press the Alarm Button to conrm the alarm time setting. The alarm schedule will ash: 7
(every day), 5 (weekdays) or 2 (weekend only). Press the or + Buttons to select the desired alarm schedule. 4. Press the Alarm Button to conrm the alarm schedule. The wake-to source will ash. 5. Press the or + Buttons to select the desired wake-to alarm source: Bluetooth or Tone. Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is detected, the alarm will default to the last tone selected. Charge Your Phone Here:
Wake to Tone: Press the Alarm Button to conrm. Press the or + Buttons to select the desired tone to wake to (Tone 1 -Tone 4). 6. Press the Alarm Button to conrm wake-to source. The alarm volume will ash. 7. Press the or + Buttons to adjust the alarm volume. 8. Press the Alarm Button to conrm the alarm settings and exit alarm setting mode. 2 beeps will conrm alarm setting is complete. The alarm icon will remain on the display, to show the alarm is armed. Previewing the Alarm and Turning the Alarm On/Off 1. Press and release the Alarm Button to view the current alarm time. 2. Press the Alarm Button to toggle the alarm ON and OFF, indicated by the related white alarm indicator. 3. When the alarm sounds, press the Power/Alarm Reset Button or the corresponding Alarm Button (1 or 2) to disable the alarm and reset it to come on at the same time the next day. Power/
Alarm Reset Set Alarm 1 Snooze/
Display Dimmer Alarm 2 Volume SNOOZE DIMMER Auto Dimmer Sensor Play/Pause/
Speakerphone/Siri/Google Back Time Set 9V/3.0A DC Jack DST -1 +1 AUTO Bluetooth Pairing Bottom*
BATTERY unscrew to open door All done!
5V/1A USB Port
(for charging devices) DST Switch Battery Back-Up Compartment
*Remove battery pull tab before use Quick Start Guide For warranty visit:
www.ihome.com/support Snooze/Display Dimmer Snooze: When the alarm is sounding, press the Snooze/Dimmer Button to snooze for 9 Playing Audio Via Bluetooth Press the Play/Pause/Speakerphone Button on the unit to play or pause audio from your linked Bluetooth device. Dimmer: Press the Snooze/Dimmer Button (when alarm is NOT sounding) to adjust display Battery Back-Up IMPORTANT SAFETY INSTRUCTIONS The unit comes with a CR-2450 back-up battery installed to provide continuous alarm operation and clock settings in the event of a temporary power failure. Remove the battery pull tab before use. When the battery icon on the clock display is ashing, it is time to replace the back-up battery. The battery compartment is located on the bottom of the unit. Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. Do not use this product near water, and clean only with dry cloth. 2. Do not block any ventilation openings. Install in accordance with the manufacturers minutes. brightness. Programmable Snooze To adjust the snooze duration:
1. Press and hold the Snooze/Dimmer Button. 2. Use the + or - Buttons to adjust the snooze duration from 1-29 minutes. Press the Snooze/Dimmer Button again to conrm. Display Auto-Dimmer This unit is equipped with a sensor that will automatically adjust the brightness of the clock display based on ambient light in your room. When the room is well lit, the display will adjust to Hi brightness for better visibility. In a dark room, it will dim to a lower brightness. You can adjust the lower limit of the Auto-dimmer to t your personal preference of display brightness in a dark room. The 3 options are:
Auto 2 minimum brightness setting will be level 2 Auto 1 - minimum brightness setting will be level 1 Auto 0 clock display will turn FULLY OFF in a dark room To adjust Dimmer settings:
Press the Snooze/Dimmer Button repeatedly to cycle through brightness levels: Auto 1, Auto 2, Auto 0, Hi, 3, 2, 1, or OFF. (Note: choosing Hi, 3, 2, 1, or OFF are xed settings and will not auto-adjust.) Manual Bluetooth Pairing 1. Press and hold the Bluetooth Pairing Button on the back of the iBTW41 for 2 seconds. 2. Select iHome Timeboost on your devices Bluetooth menu to connect. 3. If pairing is successful, the Bluetooth indicator appears solid on the clock display, indicating the iBTW41 is ready to play music. 4. To reset Bluetooth settings, press and hold the Bluetooth Pairing Button for 10 seconds. Using the Speakerphone The iBTW41 must be ON and connected to a Bluetooth device in order to receive calls. Press the Play/Pause/Speakerphone Button to accept an incoming call. Press and hold to end or ignore a call. Using Voice Commands The iBTW41 must be ON and connected to a Bluetooth device to use voice commands. Press and hold the Play/Pause/Speakerphone Button for 2 seconds to activate Siri or Google Assistant. 1. Make sure the AC adapter is connected, or you will lose your time and alarm settings during battery replacement. 2. Use a Phillips screwdriver to open the battery compartment door. 3. Remove the exhausted battery from the compartment and insert 1 CR-2450 battery, checking that the + side is facing you. Replace the compartment door. Do not overtighten. Charging Devices Via USB Port 1. Connect the standard size end of a USB cable
(not included) to the USB port on the back of the unit and connect the other end to the charging port on your device. 2. Monitor the charging on your device. Some devices use a proprietary charging method and will not charge using the USB port. If this happens, you must charge your device using the charger that came with it. NOTE: Unit must be plugged into working outlet to charge devices. DST -1 +1 AUTO WARNING WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, re, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal. Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Maintenance Place the unit on a level surface away from sources of direct sunlight or excessive heat. Protect your furniture when placing your unit on a natural wood and lacquered nish. A cloth or other protective material should be placed between it and the furniture. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents such as thinner or similar materials can damage the surface of the unit. instructions. 3. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. 4. Only use attachments/accessories specied by the manufacturer. 5. Unplug this product during lightning storms or when unused for long periods of time. 6. Damage Requiring Service This product should be serviced by qualied service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally. 7. No naked ame sources, such as lighted candles, should be placed on this product. 8. Attention should be drawn to the environmental aspects of battery disposal. 9. This product is suitable for use in tropical and/or moderate climates. 10. WARNING: To reduce the risk of re or electric shock, do not expose this product to rain or 11. Do not dispose of batteries in the household trash or re. 12. The mains plug of power adaptor is used as the disconnect device, it shall remain readily moisture. operable. FCC INFORMATION This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformit. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Tout changement ou modication non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur utiliser l'quipement. CAN ICES-3(B) / NMB-3(B), CAN RSS-216/CNR-216 1 Year Limited Warranty For warranty and full instructions, visit ihome.com/support 2021 SDI Technologies, Inc. All rights reserved. Questions? Visit www.ihome.com iBTW41-052520-A(EN) Printed in China