iAV5 QSG (English) Size: 280 x 160 mm (folded: 140 x 160 mm) Color: print Black and Material: 260gsm Art Card, 4C + 4C Jan 11, 2018 BACK FCC Information FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Model: iAV5 FCC ID: EMOIAV5 IC: 986B-IAV5 This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. QUICK START GUIDE FRONT Color Changing Bluetooth Rechargeable Stereo Speaker System for Amazon Echo Dot Model: iAV5 of the FCC Rules. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) Canada Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. le dispositif a t valu satisfaire l'exigence gnrale de l'exposition aux rf. l'appareil peut tre utilis dans des conditions d'exposition portatif sans restriction. WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below:
Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge. GENERAL BATTERY PRECAUTIONS Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. Avoid charging a rechargeable battery when the temperature is not within 5C - 35C (41 - 95 Fahrenheit). Never expose a battery to any liquid. Never expose a battery to excessive heat such as direct sunlight or re. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep batteries out of the reach of infants and small children. iAV5-171024-A Printed in China iAV5 USB cable 1 Power Button Press and hold for 2 seconds to power unit ON or OFF. 2 Battery/Charge indicator Solid red = charging Solid green = fully charged 3 USB Charge Port Connect a standard USB cable
(such as the one included with your Amazon Echo Dot) to charge iAV5 for portable use. 4 Bluetooth Indicator Fast blinking blue = pairing Slow blinking blue = linking Solid blue = paired to device 5 Bluetooth Button Press and hold for 2 seconds to pair a device with the iAV5 Press to answer incoming call Press and hold for 2 seconds to end or decline call. 6 Color Change Button Press and release to cycle through color change modes:
slow fade, fast change, favorite color, pulse to music, preset pulse mode and o. BACK 7 reset 3 1 2 6 5 4 CHARGE UNIT BEFORE USE ABOUT 7 HOURS 7 Dock cover/Built-in USB for Dot Remove back cover to connect built-in USB cable to power your Amazon Dot CONNECTING YOUR AMAZON ECHO DOT Docking Your Amazon Echo Dot Align the rear of the Echo Dot (the side with the USB port and Aux Jack) with the opening in the iAV5 dock well and place with the ports facing the back. Powering Amazon Echo Dot BACK INTERIOR Press the Bluetooth Button to answer incoming call.Press and hold to ignore/end call. You can now Ask Alexa to access all the functions of Echo Dot and hear the audio through the iAV5. VOLUME CONTROL Use the volume control on the Amazon Echo Dot to adjust the volume to your desired level. TIP: You can use Alexa voice commands to change volume or stop/pause playback. Alexa, stop Alexa, mute or Alexa, unmute Alexa, set volume to 5 Alexa, turn up/down the volume BATTERY LEVEL reset A voice will automatically announce when the battery level is very low Press and hold the Color Mode Button to hear current battery level voice announcement Connect the built-in USB cable to the Echo Dot USB Port. Connect the iAV5 to USB 7 power source via USB cable (not included). The iAV5 powers the Echo Dot. Once fully charged, you can operate both the iAV5 and the Echo Dot portably. Pairing and Playing Amazon Echo Dot Audio or Bluetooth Device Press and hold the Power Button for 2 seconds to power on the iAV5. Press and hold the Bluetooth Button for 2 seconds to enter pairing mode. Open the Alexa app and select Settings. Select your Echo Dot, then select Bluetooth >
Pair a New Device or ask Alexa to do so. Select iHome iAV5 on the menu. You will hear a Connected announcement once the Echo Dot is paired with the iAV5. Connect other buletooth device:Turn on Bluetooth mode on your device,select iHome iAV5 on the menu.when pairing successful,you will hear a Connected you can now begin to stream audio and calls from your device. RESET PORT If the unit freezes up or otherwise fails to respond properly, insert a paper clip or similar into the Reset Port on the back of the unit UNDOCKING THE DOT TIP: Insert the end of a small screw driver or simliar beside the built-in USB cable when it is connected and gently pry to release USB connector from Amazon Dot Contact Us: 18002882792 For full warranty and full instructions visit: www.ihome.com/support Amazon, Alexa, Echo Dot and all related logos are trademarks of Amazon.com, Inc. or its aliates.