iBT84 EN-IB -
Size: 214mm x 336mm Printing color: Black April 7, 2016 100gsm2 WF () Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. purchase. iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. Service. If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping instructions. instructions. Disclaimer of Warranty Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CDs or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return players, CDs or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. other rights which vary from state to state. Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product. SDI product. Model: iBT84 Color Changing Rechargeable Bluetooth Speaker with Speakerphone CHARGE BEFORE USE iBT84-160407-A (EN) 2016 SDI Technologies, Inc. All rights reserved 2016 SDI Technologies, Inc. All rights reserved Questions? Visit www.ihome.com Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free or call 1-800-288-2792 Toll Free Printed in China instruction manual Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture DO NOT immerse unit in water. Make sure the back seal and surrounding surfaces are completely dry before opening seal to prevent moisture from damaging the internal electronics. Keep seal free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason the seal is not making a tight seal, water may enter the unit. 2. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. 3. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 4. Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 5. Cleaning The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc. 6. Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 7. Attachments Do not use attachments not recommended by the product manufacturer. 8. Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 9. Overloading Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 10. Damage Requiring Service The unit should be serviced by qualified service personnel when:
B. objects have fallen into or liquid has been spilled into the enclosure. A. the power supply cable or plug has been damaged. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. 11. Periods of Nonuse If the unit is to be left unused for an extended period of time, such as E. the unit exhibits a marked change in performance or does not operate normally. a month or longer, fully charge the unit before storing. 12. Servicing The user should not attempt to service the unit beyond those methods described in the users operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free 8 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact Customer Service at -1-800-288-2792. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself. Doing so may damage the unit and will void the warranty.When disposing of unit, follow the disposal instructions below:
Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, please dispose of the device in a waste bin for electronic devices. Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see which ones in your area do so. FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. FCC ID: EMOIBT84 IC: 986B-IBT84 iBT84 This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and receiver. CAN ICES-3 (B)/NMB-3(B) IC Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. Introduction Thank you for purchasing the iHome iBT84. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. This instruction booklet explains the basic operation and care of the unit. Please read it carefully and keep for future reference. Maintenance Place the unit on a level surface away from sources of direct sunlight or excessive heat. Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. Clean your unit with a soft cloth moistened with water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit. CAUTION The battery used in this device may present a risk of fire, explosion or chemical burn if mistreated Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance. Always confirm that the temperature is 5C 35 C (41 - 95 Fahrenheit) before you charge the battery. Leakage or deterioration of the battery may occur if this warning is not heeded. Never expose the battery to any liquid. Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep the battery out of the reach of infants and small children. 9 iBT84 EN-IB Size: 214mm x 336mm Printing color: Black April 7, 2016 100gsm2 WF () Whats Included iBT84 speaker USB charging cable iBT84 Pairing Your Device Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT84. Once your device is paired, the iBT84 can recognize it and you can play your audio through it. Using the iBT84 1. Turn on your Bluetooth device and make it discoverable by turning on Bluetooth mode (check in Options or Settings). 2. Press and hold the Power On/Off Button for 2 seconds to turn on the iBT84. The first time the unit is powered on, it will enter auto-pairing mode and attempt to connect to a Bluetooth device (see step 4). Otherwise, power on, then follow step 3 to begin pairing. 3. Press and hold the Bluetooth/Speakerphone Button for 2 seconds. The iBT84 will beep and the Bluetooth status indicator light on top of the unit will flash quickly. If Color Mode is on, the cabinet lights will flash blue and red. 4. iHome iBT84 should appear in your devices Bluetooth menu. If Not Paired, Not Connected or similar message appears, select iHome iBT84 to connect it. If prompted for a passcode, enter 1234 on your devices keypad. iBT84 USB charging cable 1 For iPhone iHome iBT84 iHome iBT84 For other iHome iBT84 iHome iBT84 5. If pairing is successful, 1 beep will sound and the Bluetooth status indicator light will appear solid blue (in Color Mode, cabinet will flash blue twice), indicating the iBT84 is ready to play music. There should also be an indication on your device. If no device is successfully paired within 3 minutes the iBT84 will default to previous mode. Once the iBT84 is paired to a device, it will attempt to autolink when the device is within range (about 33 feet). 5 Meet Your iBT84 Top Front Power On/Off button iBT84 Blue Bluetooth Status Indicator Light Red Charging Status Indicator Light Back USB In Port
(charges unit) Microphone Splashproof seal Bluetooth/
Speakerphone Button Color Mode Button
(press and hold for Battery Review) USB Out Port
(charges other devices) Aux-in Jack 2 Lower/Raise Volume Buttons Charging the Unit CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING 1. Connect the micro USB plug on the included USB cable to the micro USB In charging port on the back of the unit. 2. Connect the standard USB plug end of the cable to a powered USB port on a computer, a USB AC adaptor or other USB charging device. For first time use, charge unit for about 4 hours. The red charging status indicator LED on top right of the unit blinks when battery needs charging, turns solid while charging and turns off once unit is fully charged. Charge via computer USB port, USB AC adaptor or other powered USB port Computer connected to working outlet iHome iBT84 USB port iHome iBT84 USB port USB AC adaptor
(not included) Computer USB port USB AC adaptor connected to working outlet TIP: On some iOS (Apple) devices, you can view the iBT84 battery status on your devices screen. When device is paired and connected, look for a vertical battery icon next to the Bluetooth icon on the upper right corner of the devices screen. Pairing with a Different Device When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (about 33 feet). To pair with a different device follow steps 1
- 4 under Pairing Your Device on previous page. Playing Audio Via Bluetooth 1. Press and hold the Power On/Off Button for 2 seconds to turn on the unit. The Bluetooth status indicator will glow solid blue when a linked device is in range and detected. You can then listen to audio streamed wirelessly from your paired Bluetooth device. 2. Use controls on your Bluetooth device to play, pause and navigate tracks. 3. Press the + or Button to adjust the iBT84 volume. You can also adjust volume on your device. 4. When done listening, press the Power On/Off Button to turn the unit OFF. Remember to turn off your device, too. Speakerphone Operation NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. 1. When a call is received, playing music is muted to hear the ring tone and the cabinet lights flash green. Press the Bluetooth/Speakerphone Button to answer the call. For call waiting function, press the button again to answer the second call, and once more to return to the original call. 2. When a call is completed, press the Bluetooth/Speakerphone Button to end the call and resume previous function. 6 Playing Audio via Aux In 1. Connect a standard audio cable (not included) to the Aux-in jack on the back of the unit and connect the other plug end to the headphone or line-out jack on your audio device. 2. Press and hold the Power On/Off Button for 2 seconds to turn the unit ON. 3. Power on your aux audio device and use the controls on the device to play or pause audio and to navigate tracks. 4. Press the + or Button to adjust the system volume. You can also adjust volume on your device. 5. When done listening, press the Power On/Off Button to turn the unit OFF. Remember to turn off your device, too. PC/Tablet Mobile Phone Using Color Modes There are six color modes, which you cycle through in this order:
a. Slow Fade (colors slowly fade from one into the next b. Fast Change (colors change rapidly) c. One Color (select a favorite color) e. Preset Pulsing (each light array pulses through its own preset pattern of colors) f. Off (no display) 1. Press and hold the Power On/Off Button for 2 seconds to turn the unit ON. 2. Press the Color Mode Button repeatedly to cycle to the desired color mode. For One Color mode, first cycle to Fast Change mode and press the Color Mode Button when the desired color appears. For Pulse to Music, make sure the volume on your connected Bluetooth device is above 50%. d. Pulse to Music (lights flash to the beat of the music) Game Devices iPod MP3/MP4 Laptop 3 7 3. When done, press the Power On/Off Button to turn the unit OFF. TIP: Download free iHome Enhance app from the App Store for expanded color adjustment features. 4/072016 3. To review the charging status of the unit while it is charging, press and hold the Color Mode Button. The cabinet lights will flash green from bottom to top for 5 seconds to show unit is charging. Reviewing Battery Charge Level (Charger is Disconnected and unit is ON) 1. Press and hold the Color Mode Button when unit is ON but not charging (micro USB cable not connected) to enter Battery Review Mode. The cabinet lights will blink and built-in voice will announce the current battery level. Unit doesnt respond (no power) Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT84. Make sure the unit is on Troubleshooting Unit doesnt respond (locked up/ frozen) If the unit does not respond, try resetting the unit by inserting the end of a paperclip or similar into the Reset Port located under the splashproof seal on the back of the unit . To clear Bluetooth settings, press and hold both the + and Buttons at the same time for about 10 seconds. Note that doing so will clear settings, and any Bluetooth devices will need to be re-paired. Trouble pairing device with iBT84 Bluetooth implementation varies depending on your devices hardware and operating system. Please see our website for updates on pairing. When you power ON the speaker, it will automatically link with the last previously paired Bluetooth device if the device is still within range (about 33 feet). To pair with a different device you must turn off Bluetooth capability on the already paired device, or take it out of range. If your device does not auto-link when within range, re-pair the device. To do so, first delete the iBT84 Make sure your device is working properly. Check your devices manual for details on Bluetooth pairing from your Bluetooth devices menu. and linking. 4 8 8 For further information and to see the latest instructions, visit www.ihome.com/support