HDL50 Quick Start Guide - Front Size: 432 x 140 mm Printing Color: Black Matl: 100 gsm WF paper Mar. 21, 13. HDL50 Sta Quick Start Guide Remove thumbscrew and remove back cover to access sta controls Set Up Included HDL50 system 100V-240V universal AC adaptor Connect AC adaptor to DC jack/wall outlet outlet 12V 3.5A 12VDC 35000mA DST
-1 +1 auto time set time sync time zone volume level high low Remove pull tab from Backup Battery Compartment located on bottom of the unit. When Low Battery Icon appears on display, replace backup battery with 1 fresh CR2450 battery. Keep unit connected to power when replacing battery or you will lose settings. Secure the attached Security Tether to a wall or other permanent surface. CAUTION: DO NOT attach to an AC outlet or cause it to become entangled with anything that can create a hazardous situation. Setting Clock Using Time Sync a) Connect a Lightning-compatible iPhone to the Dock a Or b) connect any iPhone to the USB port using the USB cable that came with it b HDL50 Quick Start Guide - Inside Size: 432 x 140 mm Printing Color: Black Matl: 100 gsm WF paper Mar. 21, 13. Manual Clock Setting Press and hold the Time Set Button time set 2 SECS Press the Time Set Button to conrm Clock Setting time set talk FM presets pairing alarm set alarm on/o to use Bluetooth 1- place your device into discoverable mode 2- press and holdpairing button on unit for 2 sec 3- if prompted, enter code 0000 4- your device is now paired. You can answer and end calls by pressing talk and end function wake-to power iPod/USB/radio Bluetooth/line-in end snooze/dimmer Beep Beep Press the or button to tune to a desired station (hold to search for next clear station) Press the Time Sync Button on the back of the unit to instantly set the time on the HDL50. time sync NOTE: For the fastest, most accurate time setting, set the clock using Time Sync with a) a docked iPhone OR b) an iPhone connected to the USB port iPhone time is always current because it pings o cell towers;
iPad or iPod are only accurate to the last time they were synced to a computer. Make sure the DST switch is in AUTO position. If you do not have an iPhone or if time sync fails, set the clock manually. Daylight Saving Time
-1 +1 auto DST The unit ships with the Daylight Saving Time (DST) switch in Auto position, and will automatically adjust when the time changes in March and November. to use alarm 1- press alarm set button 2- use </> to set desired wake-up time 3- press alarm set button again to confirm 4- press wake-to button to switch between waking to your iPod, USB dock, radio, or buzzer Press FM presets Button to conrm FM presets Beep Beep Follow steps above to set all 6 FM presets Once sta has completed setup, replace security cover on back of unit and tighten thumbscrew. Press the or button to set time Press the Time Set Button time set Press the or button to set year Press the Time Set Button time set Press the or button to set date Setting 12/24 Hour Time Display Press and hold the Time Set Button time set 2 SECS FM Presets Press FM presets Button to cycle to the preset
(P1- P6) you wish to set FM presets To toggle time display between 12 or 24 hours, press alarm set button Press the Time Set Button to conrm alarm set time set FM Radio Press function Button as needed to cycle to FM mode function iPod/USB/radio Bluetooth/line-in 2 SECS Beep Beep Press and hold FM presets Button to conrm preset number Press the or button to select station to preset HDL50QSG-031913-A 2013 HTI Industries, LLC. All rights reserved Printed in China