FCC ID: EMOICVBT9A iHome Beauty REFLECT SPLIT Mirror and BT speaker

size: 306mm(W) x 150mm(H) Folded Size: 102 x 150 mm Matl: 85gsm, WF paper, 1C + 1C Color: Black text on white background Oct 13, 2023 Charging the Mirror and BT speaker There are 2 USB-C charging ports for battery charging. One is at the back of mirror for charging the mirror only. Another one is at the right side of BT speaker base for charging BT speaker only. Dock mirror to charging base (connect the included USB charging cable to the USB-C Charging Port on the BT speaker changing base, the another end of charging cable connect to 5V USB AC adaptor, simultaneously charge the BT speaker base and mirror. Finger Loop LED indicator USB-C charging cable (included) 5V USB AC adaptor

(not included) Using the mirror light function Tap button to turn the mirror ON or OFF. Once power on the mirror, tap button to adjust mirror light color mode:

White (Cool) /

Yellow (Warm) /

White/Yellow (Bright)/OFF Once power on the mirror, press and hold button to adjust mirror brightness. Light button Mirror Volume Up/Down buttons Bluetooth speaker charging base Using the Bluetooth charging speaker

- Press and hold button for 2-3 seconds to Bluetooth speaker ON/OFF.

- Quick press button to pause or play music.

- The rst time the unit is powered on it will enter auto-pairing mode.

- Select iHome iCVBT9 on your device to connect BT.

- To manually pair with new BT device, press and hold button for 3 seconds. USB-C charging port Status LED BATTERY STATUS BLUETOOTH STATUS

- Press and hold button for 3 seconds to announce battery iCVBT9W.EXv24 Quick Start Guide RED Charging OFF fully charged BLUE pairing (ashing) BLUE connected Note: If the battery is very low, it will announce voice prompt

"Battery very low". level voice prompt.

- Single press button to volume up.

- Single press button to volume down.

- Double press button to previous song.

- Double press button to next song.

- To reset Bluetooth pairing table press and hold and button simultaneously for 3 seconds. Maintenance Suggest to use a cleaning cloth to keep the mirror smudge free.

(If more cleaning is needed, unplug the unit and wipe down with a slightly damp cloth.) 1 2 9/29/23 WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below:

Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge. To nd a drop-off location near you, visit www.call2recycle.com GENERAL BATTERY PRECAUTIONS Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. Avoid charging a rechargeable battery when the temperature is not within 5C - 35 C

(41 - 95 Fahrenheit). Never expose a battery to any liquid. Never expose a battery to excessive heat such as direct sunlight or re. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep batteries out of the reach of infants and small children. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. Do not use this product near water. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. 2. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 3. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. 4. Only use attachments/accessories specied by the manufacturer. 5. Unplug this product during lightning storms or when unused for long periods of time. 6. Damage Requiring Service This product should be serviced by qualied service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally. 7. No naked ame sources, such as lighted candles, should be placed on this product. 8. Attention should be drawn to the environmental aspects of battery disposal. 9. This product is suitable for use in tropical and/or moderate climates. WARNING:

- To reduce the risk of re or electric shock, do not expose this product to rain or moisture.

- Do not dispose of batteries in the household trash or re.

- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.

- If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.

- Always use a UL/ETL certied charging adapter (not included), and the supplied USB charging cable.

- Sunlight: Never place the mirror in or expose the mirror to direct sunlight. The suns rays can reect to become focused and cause excessive heat and/or re. Do not use mirror in direct sunlight as reected sunlight could injure eyes. 3 FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class Hvin: iCVBT9a FCC ID: EMOICVBT9A IC: 986B-ICVBT9A B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformit. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Tout changement ou modication non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur utiliser l'quipement. CAN ICES-3(B) / NMB-3(B) 4 Limited One Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to rst return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verication of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service is required, please call contact Customer Service at ihome.com/support/contact to obtain a Return Authorization Number and shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage. If proof of purchase cannot be produced, the product will be deemed out-of-warranty. The date of purchase, vendor, product model number, and purchase price must be legible and veriable. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modied or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CDs or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost prots, actual, exemplary or punitive damages.

(Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product. 2023 SDI Technologies, Inc. All rights reserved. Questions? Visit www.ihome.com iCVBT9-QSG-101323-A Printed in China

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com Attestation Letter Date: 10/19/2023 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i) Filing FCC ID: EMOICVBT9A SDI Technologies Inc. certifies that the equipment for which authorization is sought, is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, David Stetin Compliance Officer CFR 47 2.911(d)(5)(i) Attestation Letter

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com Attestation Letter Date:10/19/2023 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(ii) Filing FCC ID: EMOICVBT9A SDI Technologies Inc. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, David Stetin Title: Compliance Officer CFR 47 2.911 (d)(5)(ii) Attestation Letter

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com Date: 2023-10-19 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam, Attestation letter Our product iHome Beauty REFLECT SPLIT Mirror and BT speaker, model:

iCVBT9W.EXv24, iCVBT9, iCVBT9X (X could be single or multiple digits by any alphabets and punctuation marks )), FCC ID: EMOICVBT9A, for marketing purpose, this product only supports BT(GFSK, /4-DQPSK, 8DPSK), BLE 1M. The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely Yours, Signature:

David Stetin Compliance Officer

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com Product Similarity Declaration 2023-10-19 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, We, SDI Technologies Inc., hereby declare that we have a product named as iHome Beauty REFLECT SPLIT Mirror and BT speaker, Model number: iCVBT9W.EXv24

(FCC ID: EMOICVBT9A) was tested by China Certification ICT Co., Ltd (Dongguan) , meanwhile, for our marketing purpose, we would like to list series models (iCVBT9, iCVBT9X (X could be single or multiple digits by any alphabets and punctuation marks )) on reports and certificate, all the models are electrically identical. The difference among them are the year codes and buyer codes. No other changes are made to them. We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours, Signature:

David Stetin Compliance Officer

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com FCC Authorization Date: 2023-10-19 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, SDI Technologies Inc., the undersigned, hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, David Stetin Compliance Officer QA-FR-170-B 7/29/2014

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com FCC Confidential Authorization Date: 2023-10-19 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: EMOICVBT9A In accordance with Sections 0.457 and 0.459 of the Commissions Rules, SDI Technologies Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, David Stetin Compliance Officer

U.S. AGENT LETTER OF ATTESTATION Date: 2023-10-19 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7) Filing FCC ID: EMOICVBT9A SDI Technologies Inc. certifies that, as of the date of the filing of the application, SDI Technologies Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. SDI Technologies Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. SDI Technologies Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information:

Name: SDI Technologies Inc. Address: 1299 Main St. Rahway NJ 07065, United States FRN: 0003786449 Tel.: 732 574-9000 Email: dstetin@sditech.com Signed by (printed name): David Stetin Signature: