FCC ID: EMOIZBT110B Portable Meditative Light & Sound Therapy Candle

Model: iZBT110W.EXv23 Instruction manual - US English Size: 350mm(W) x 120mm(H) Folded Size: 175 x 120 mm 157gsm Art paper / 1C + 1C / Straight corners May 05, 2023. v4 WHATS IN THE BOX CANDLE WHATS IN THE BOX Instructions USB-C Cable iZBT110 Zenergy Candle FRONT PANEL BACK PANEL Charging LED Reset Button USB-C Port Plus Button Power ON/OFF Minus Button Bluetooth Pairing Button/

Play/pause Button Sleep Timer Button Timer LED Bluetooth Pairing LED Light Therapy Modes Sound Therapy Modes GETTING STARTED 1. Charging the Unit CHARGE BEFORE USE Connect one end of the included USB charging cable to the USB-C Charging Port on the back of the unit. Connect the other end to a USB AC adapter (not included) or the USB charging port on your computer/laptop. Model: iZBT110 Portable Bluetooth Sound Soother QUESTIONS? visit www.ihome.com USB-C cable (included) USB AC adaptor

(not included) Charging LED Status:

Flashing Red LED:

Unit is charging. Fast Blinking Red LED:

Battery low. Charge unit. LED OFF:

Unit is fully charged. CANDLE 2. Connecting to Bluetooth

- Press the Power Button to turn the unit ON.

- For rst time use, press and release the Bluetooth Pairing Button to enter pairing mode. To manually pair, press and hold the Bluetooth Pairing Button until the blue LED ashes.

- Select iHome iZBT110 on your devices Bluetooth menu to connect. iHome iZBT110 Instructions USB-C Cable iZBT110 Zenergy Candle FRONT PANEL BACK PANEL Charging LED Reset Button USB-C Port USING LIGHT THERAPY Color light therapy can enhance the home through ambient or night-time lighting to help improve mood, energy and sleep. Press the Light Therapy Button to access Light Therapy mode. Continue to press as needed to cycle to each mode, including OFF:

Plus Button Bluetooth Pairing Button/

Play/pause Button Candle:

Power ON/OFF Minus Button Light Therapy Modes Sound Therapy Modes GETTING STARTED 1. Charging the Unit Sleep Timer Button Timer LED Bluetooth Pairing LED To reset Bluetooth, press and hold Bluetooth Pairing Button for 10 seconds CHARGE BEFORE USE Connect one end of the included USB charging cable to the USB-C Charging Port on the back of the unit. Connect the other end to a USB AC adapter (not included) or the USB charging port on your computer/laptop. Model: iZBT110 Portable Meditative Light & Sound Therapy Candle QUESTIONS? visit www.ihome.com USB-C cable (included) USB AC adaptor

(not included) Charging LED Status:

Flashing Red LED:

Unit is charging. Fast Blinking Red LED:

Battery low. Charge unit. LED OFF:

Unit is fully charged. Provides the ambiance of a calming candle icker without the safety risks posed by a real ame Deal for illuminating a small space A gentle fading spectrum of solid colors creates a beautiful atmosphere for day or night mood lighting Select the current color Light pulses to Bluetooth audio Nightlight:

Glow:

One Color:

Pulse:

ADJUSTING THE BRIGHTNESS When you turn on Light Therapy or change a light mode while sound is ON, press the - or

+ Buttons within 5 seconds to adjust the brightness level. Adjust light at anytime when sound is OFF. Press and hold the Light Therapy Button for 2 seconds to exit light therapy mode. Press the Light Therapy Button again to resume mode at the last light pattern used. USING SOUND THERAPY Sound Therapy uses specially recorded and engineered sounds to cancel out distractions and allow your mind to calm. 1. Press the Sound Therapy Button to access Sound Therapy mode. Continue to press to cycle to each mode:

Sound Therapy Modes:

4-7-8 Breathing Coach Zen Meditation Storm Wind Chimes Air Quiet Dream Trance Nature Drive 2. Press and release the or + Buttons to adjust speaker volume. 3. Press and hold the Sound Therapy Button for 2 seconds to exit sound therapy mode. Note: After 60 minutes of no sound or light activity, unit will automatically power OFF. To resume operation, press the Power Button. Peace Ocean River Focus Off USING THE SLEEP TIMER The programmable timer mode lets you set any combination of light and sound therapy for a set duration. The light and sound levels will gradually decrease over the last 15 minutes (fade begins right away if timer is set to 10 minutes or less) until the unit shuts off. Press the Sleep Timer Button as needed to cycle to the desired timer duration: 10 minutes, 30 minutes, 1 hour, 2 hours, 4 hours, 6 hours, 8 hours, or OFF. Timer mode is rst indicated by a voice guide and the Timer LED next to the Timer button. Green indicates more than 60 minutes remaining, yellow indicates 30 minutes or less remaining and red indicates 10 minutes or less remaining. Press and hold the Timer Button for 2 seconds to cancel timer mode. Timer mode is inactive when no timer indicator is lit. CONNECTING + PLAYING BLUETOOTH AUDIO Stream Bluetooth audio through the speaker in the unit:

1. For rst time use, press and release the Bluetooth Pairing Button to enter pairing mode. To manually pair, press and hold the Bluetooth Pairing Button until the Bluetooth LED ashes. 2. Select iHome iZBT110 on your Bluetooth device to connect. 3. The Bluetooth LED will glow solid to conrm a device is connected. 4. Press the Bluetooth Pairing Button to play/pause audio. Use the controls on your device to navigate tracks. Use the + and - Buttons on the unit to control volume. RESETTING THE UNIT In the event of interrupted operation, use the extended tip of a paper clip or other thin tool to press in the Reset Button pinhole located on the back of the unit. MAINTENANCE Place unit on a level surface away from sources of direct sunlight/excessive heat. Protect your furniture when placing your unit on a natural wood and lacquered nish. A cloth or other protective material should be placed between it and the furniture. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents such as thinner or similar materials can damage the surface of the unit. WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below:

Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge. To nd a drop-off location near you, visit www.call2recycle.org GENERAL BATTERY PRECAUTIONS Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. Avoid charging a rechargeable battery when the temperature is not within 5C - 35 C (41 - 95 Fahrenheit). Never expose a battery to any liquid. Never expose a battery to excessive heat such as direct sunlight or re. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep batteries out of the reach of infants and small children. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. Do not use this product near water. 2. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. 3. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 4. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. 5. Only use attachments/accessories specied by the manufacturer. 6. Unplug this product during lightning storms or when unused for long periods of time. 7. Damage Requiring Service This product should be serviced by qualied service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally. 8. No naked ame sources, such as lighted candles, should be placed on this product. 9. Attention should be drawn to the environmental aspects of battery disposal. 10. This product is suitable for use in tropical and/or moderate climates. WARNING:

- To reduce the risk of re or electric shock, do not expose this product to rain or moisture.

- Do not dispose of batteries in the household trash or re.

- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.

- If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.

- Always use a UL/ETL certied charging adapter (not included), and the supplied USB charging cable. FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. Any Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformit. Tout changement ou modication non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur utiliser l'quipement. CAN ICES-3(B) / NMB-3(B) ONE YEAR LIMITED WARRANTY iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to rst return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verication of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service is required, please contact Customer Service at ihomeaudio.com/support/contact to obtain a Return Authorization Number and shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage. If proof of purchase cannot be produced, the product will be deemed out-of-warranty. The date of purchase, vendor, product model number, and purchase price must be legible and veriable. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modied or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CDs or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost prots, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product. 2023 SDI Technologies, Inc. All rights reserved Questions? Visit www.ihome.com iZBT110-040523-B Printed in China

i GAW Title: Portable Light & Sound Therapy Candle Version: 2 I Model110 Designer: Mitchell Bailey Date: 03.05.2023 and PROPRIETARY:

contained herein including, CONFIDENTIAL The information rendartngs, TechnlogiesInc. and shall di scisad by the recipient but not limited to the products, Intellectual property of SDI not be ud or be kept condenaland shall wiutthewrn a horityof SDInologiasInc. con ptsand designs comprise May 03, 2023 May 03, 2023 Blue Debossed 0.3mm USB-C port udpated See DL focolor Cool grey4U RED -Pad Printed, w:[- + RED-Pad Printed, See DL for col clgrey4U a c n d B a 2 E u u d t Enve e mH L E Mdelplate WFT: white background BH: Black

, Text: Coolgray BC Text cool g y4U background, Mdelnplate 2023.os.02 Updated

May 24, 2023 SDI Technologies Inc. 1299, Main Street, Rahway, NJ 07065, U.S.A. RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv at EMTEK(DONGGUAN) CO., LTD. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, David Stetin

SDI Technologies Inc. May 24, 2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: EMOIZBT110B SDI Technologies Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, David Stetin SDI Technologies Inc. May 24, 2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: EMOIZBT110B SDI Technologies Inc. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, David Stetin

May 24, 2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR

Product Name Portable Meditative Light & Sound Therapy Candle iZBT110, iZBT110WFT, iZBT110X (X could be single or multiple digits by any alphabets and punctuation marks denoting different color/type of cabinet, year versions and clients) EMOIZBT110B

: SDI Technologies Inc.

: 1299, Main Street, Rahway, NJ 07065, U.S.A. Model Number FCC ID applicant Address

) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagram, Schematics, Operational Description) required to be submitted with this application be permanently withheld from public review. SPECIFY REASON FOR REQUEST (The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors.) Please contact me if there is any information you may need. Sincerely, David Stetin

SDI Technologies Inc. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RF module and antenna, PCB layout , schematics and component. Only different on model number. Production name Portable Meditative Light & Sound Therapy Candle Trademark iHome FCC Model no. EMOIZBT110B iZBT110, iZBT110WFT, iZBT110X (X could be single or multiple digits by any alphabets and punctuation marks denoting different color/type of cabinet, year versions and clients) Confirmed by:

David Stetin

Attestation Statements May 24, 2023 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for FCC ID: EMOIZBT110B SDI Technologies Inc., the undersigned, hereby authorize SDI Technologies Inc. to act as our designated U.S. agent for service of process, SDI Technologies Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. SDI Technologies Inc. accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information Company name:SDI Technologies Inc. Contact Name:David Stetin Address:1299, Main Street, Rahway, NJ 07065, U.S.A. Telephone No:732 574-9000 Email: dstetin@sditech.com U.S. Agent Information:

Company Name: SDI Technologies Inc. Contact Name: David Stetin Address: 1299, Main Street, Rahway, NJ 07065, U.S.A. Telephone No: 732 574-9000 Email: dstetin@sditech.com REN: 0003786449 Applicant Signature:

Agent Signature:

(if the agent is different from the applicant) Applicant printed name: David Stetin Agent printed name:David Stetin