iBT39 QSG (EN) size: 110 x 165 (mm) color: 2C + 1C (PMS7467C + black) Material: 350gsm2 art card Nov 3, 2016 PMS7467C Model: iBT39 QUICK START GUIDE In the Box iBT39 speaker charging cable Charging Connect the micro-USB plug on the included charging cable to the USB Charging jack on the speaker. Connect the larger USB plug to a powered USB port such as that on a computer or a USB AC adaptor. Battery Level Meter on front of unit Battery Charge Status dead, needs charge low, needs charge 46 - 60% charged 60 - 99% charged 100% charged iHome iBT39 USB port Computer connected to working outlet Computer USB port USB AC adaptor (not included) Bluetooth Pairing & Playing Make your device discoverable by turning on Bluetooth mode Press and release the Power Button to turn on iBT39 Pairing the First Time Manual Pairing The rst time the unit is powered on it will enter auto-pairing mode After powering unit on Press and hold the Bluetooth Pairing Button for 2 seconds Select iHome iBT39 on your devices Bluetooth menu to complete pairing Press the Play/Pause Button to play/pause music Press the - or + buttons to adjust volume Speakerphone The speaker must be on and connected with a paired Bluetooth device to recieve calls Press the FWD/Answer Call Button to answer call For call waiting function, use phone controls on your device Press the REV/End Call Button again to end call Waterproof Operation For waterproof operation, ensure the waterproof cover on side of unit is pressed completely ush with the unit water tight not water tight iBT39 FCC ID:EMOIBT39N IC:986B-IBT39N FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) Canada Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. Contact Us: 18002882792 For warranty information and full instruction book visit: www.ihome.com/support iBT39 - 161103 -A(EN) Printed in China