FCC ID: EMOVB26A Wireless Headphones

XX-VB26 IB (English) Size: 120 x 150 mm Printing color: Black (1C + 1C) Material: 85 gsm WF paper Oct 23, 2023 FRONT BACK Model: VB26 Series Wireless Headphones CHARGING THE HEADPHONES CHARGE BEFORE USE USB charging cable

(included) USB AC adaptor

(not included) The LED indicator (located on the right ear cup) will glow red while the headphones are charging, and will automatically turn to solid blue once fully charged. POWER ON/OFF -Press and hold the Button for 2 seconds to turn the headphones ON/ OFF. BLUETOOTH PAIRING

- Press and hold the Button for 2 seconds to turn the headphones ON. The headphones will enter pairing mode and the LED indicator will ash blue and red.

- Select T2G-VB26 on your Bluetooth-enabled device to connect.

- A tone will sound and LED indicator will turn to solid blue when pairing is complete. Once paired, headphones will automatically connect to your BT device whenever it is in range.

- When audio is playing, press the Button to play or pause.

- Use the controls on your device to navigate tracks and adjust the volume.

- If no audio is playing for 60 minutes, the unit will automatically shut off to conserve the battery. Press the Button to resume operation. SPEAKERPHONE

- Press the Button to accept an incoming phone call.

- Press and hold the Button to to reject an incoming call.

- Press the Button to end a phone call. WARNING: For your safety, do not use headphones if they would prevent you from hearing warning sounds, such as while riding a bike, crossing the street, etc. IMPORTANT SAFETY INSTRUCTIONS - Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. Only use an UL/ETL certified charging adapter (not included), and the supplied USB charging cable. Never leave the device unattended when charging. Always charge lithium devices on a non-flammable surface -

wooden tables, carpeted floors and bedding are not recommended charging surfaces. Keep batteries out of the reach of infants small children. GENERAL BATTERY PRECAUTIONS - Never use or charge a battery if it appears to be leaking, or in any way abnormal. Avoid charging battery when the temperature is not within 5C - 35 C (41 - 95 Fahrenheit). Never expose a battery to any liquid, or to excessive heat such as direct sunlight or fire. Never leave in an unventilated vehicle where excessive internal temperatures may be encountered. WARNING/DISPOSAL OF UNIT - Do NOT attempt to change or disassemble the built-in battery. Doing so will void the warranty and could cause personal injury and damage to your device. Do not dispose of batteries in the household trash or fire. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. To find a drop-off location near you, visit www.call2recycle.org FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. FCC ID : EMOVB26A IC : 986B-VB26A HVIN : VB26a This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B) / NMB-3(B) IC Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. Any Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformit. Tout changement ou modication non expressment approuv par la partie responsable de la conformit pourrait annuler le droit de l'utilisateur utiliser l'quipement. To prevent possible hearing damage, do not listen at high volume levels for long periods. THIS IS NOT A TOY. VB26_102323-A 2023 Tech2Go All Rights Reserved. Printed in China

Model: MO-VB26.EXv24 TM & 2024 Nintendo. Tech 2 Go, LLC FCC ID: EMOVB26A IC: 986B-VB26A HVIN: VB26a TRACKING NUMBER : kKI111023 10L3L0 LEA a TAATHHTTATT HATA AANA YY sls 01 02 OF OF 05 08 OL 08 08.99), Oz VE OF OS 0 OL OE U6 GRO GE OE or 05 09 02 0 06 O0LoL oz o oF 08 09 ox 09 Os 00ZO ox OF OY OS 98 OL oa nudoduuhsnhnaoadndalontiniialuhunbuubut nnn

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com Attestation Letter Date: 11/23/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i) Filing FCC ID: EMOVB26A SDI Technologies Inc. certifies that the equipment for which authorization is sought, is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature:

David Stetin Compliance Officer CFR 47 2.911(d)(5)(i) Attestation Letter

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com Attestation Letter Date: 11/23/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(ii) Filing FCC ID: EMOVB26A SDI Technologies Inc. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature:

David Stetin Title: Compliance Officer CFR 47 2.911 (d)(5)(ii) Attestation Letter

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com Date: 2023-11-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam, Attestation letter Our product Wireless Headphones, model: MO-VB26.EXv24, M1-VB26 M2M3M4M5M6M7M8M9M10 (M1-M10, please refer to model no. table), FCC ID: EMOVB26A, for marketing purpose, this product only supports BT(GFSK,

/4-DQPSK, 8DPSK). The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely Yours, Signature:

David Stetin Compliance Officer

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Email: dstetin@sditech.com Fax: 732 574-2634 Product Similarity Declaration 2023-11-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, We, SDI Technologies Inc., hereby declare that we have a product named as Wireless Headphones (Model number: MO-VB26.EXv24, FCC ID: EMOVB26A) was tested by China Certification ICT Co., Ltd (Dongguan), meanwhile, for our marketing purpose, we would like to list series models (M1-VB26 M2M3M4M5M6M7M8M9M10 (M1-M10, please refer to model no. table)) on reports and certificate, all the models are electrically identical. The differences please see the model no. table. No other electrical changes are made to them. There are so many series models due to different buyers, brands and colors. M1 2 to 3 Part of model #

Number of digit(s) Description 2 to 3 digits alphabetsco mbination by a Z for brand M6 1 X for no sound effect M8 1 M for Movie version brand Or blank M7 1 to 3 0-9 for year version Or V0 V99 for year version M9 M10 1 to 2 1 to 2 1 to 2 digits alphabets combinati on by a Z for different buyers) Or blank i for inner carton required Or z for direct to consumer on-line packaging Or OL for Amazon packaging Or blank M2 M3 M4 M5 1 to 2 1 1 1 to 2

. Or blank U for Europe version Or blank 1 to 2 digits alphabets combination by a Z for special character version Or blank E for English content Or F for English &

French Or 3 for 3 language version Or 5 for 5 languages version Or 11 for Europe version with 11 languages Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Email: dstetin@sditech.com Fax: 732 574-2634 We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours, Signature:

David Stetin Compliance Officer

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com FCC Authorization Date: 2023-11-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We SDI Technologies Inc., the undersigned, hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

David Stetin Compliance Officer QA-FR-170-B 7/29/2014

Applicant: SDI Technologies Inc. Add: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com FCC Confidential Authorization Date: 2023-11-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: EMOVB26A In accordance with Sections 0.457 and 0.459 of the Commissions Rules, SDI Technologies Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature:

David Stetin Compliance Officer

U.S. AGENT LETTER OF ATTESTATION Date: 2023-11-23 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7) Filing FCC ID: EMOVB26A SDI Technologies Inc. certifies that, as of the date of the filing of the application, SDI Technologies Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. SDI Technologies Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. SDI Technologies Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information:

Name: SDI Technologies Inc. Address: 1299 Main Street, Rahway, NJ 07065, United States FRN: 0003786449 Tel.: 732 574-9000 Email: dstetin@sditech.com Signed by (printed name): David Stetin Signature: