FCC ID: 2AMFBFM3NTF Mesh network Node

FlatMesh Nano / NanoPlus /

NanoMacro /

NanoMacro(High-G Variant) User Guide FM3NT-10 FM3NT-30 FM3NT-50 FM3NT-50H 0.01 Contents Worldwide Information 0.0.1 USA . 0.0.2 Canada . 1 Overview 1 1 1.1 The FlatMesh System . 1 1.2 FlatMesh Nano / NanoPlus / NanoMacro Nodes . 2 1.2.1 Physical Specifications FM3NT-10 and FM3NT-30 1.2.2 Physical Specifications FM3NT-50 and FM3NT-50H 2 3 1.2.3 Internal Battery FM3NT-10 and FM3NT-30 . 3 1.2.4 Internal Battery FM3NT-50 and FM3NT-50H . 1.2.5 FlatMesh Radio Specifications . 3 4 1.2.6 Tilt Sensor Specifications . 2.1 Mounting . 2 Installation 3 Maintenance 4 Support 4.1 Contact Information . A Import / Export Restrictions ii ii iii 5 5 6 7 7 8 i Worldwide Information Warning Protection provided by the equipment may be impaired if used in a manner contrary to this user manual. This product must not be disposed of in the normal waste stream. It contains a battery pack and electronic components and so should be recycled appropriately. In accordance with the WEEE guidelines, customers in the European Union may return the product free of charge for recycling at the end of its life. Contact your supplier for details. 0.0.1 USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

This device must accept any interference, and This device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by Senceive Limited could void the users authority to operate the equipment. ii WORLDWIDE INFORMATION iii 0.0.2 Canada This device contains a licence-exempt transmitter that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS-247. Operation is subject to the following two conditions:

This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. The safe distance for human exposure to electromagnetic field is 20cm. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

lappareil nedoit pas produire de brouillage, et lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La distance de scurit pour lexposition humaine au champ lectromagntique est de 20cm. Chapter 1 Overview 1.1 The FlatMesh System A FlatMesh network consists of a number of nodes connecting to one gateway device. In some situations multiple networks may be required on a single site, for example a site in which the number of nodes ex-

ceeds the number supported by a single Gateway, or a site where there are a set of separate measurement zones. A FlatMesh Node is a sensing unit with an integrated wireless mesh radio and battery. It participates in a FlatMesh wireless network, for-

warding messages as required by the system, and also takes samples from onboard and/or external sensors. Sampling is done on a periodic schedule which may be either fixed or variable. In addition, a sample may be manually requested via the Gateway. 1.2 FlatMesh Nano / NanoPlus / NanoMacro Nodes The FlatMesh Nano family contains a high precision triaxial tilt sen-

sor. This sensor measures the orientation of the node relative to the direction of gravity using a MEMS accelerometer. 1 CHAPTER 1. OVERVIEW 2 Note Readings can be scheduled anywhere between two seconds and twelve hours with a time increment of one second, but it should be noted that the repeatability of the measurements are poorer when used at reporting rates faster than 10 seconds. 1.2.1 Physical Specifications FM3NT-10 and FM3NT-30 Model Diameter Height Total Mass Housing Material International Protection Marking Mounting Options Operating Temperature Range Model Diameter Height Total Mass Housing Material International Protection Marking Mounting Options Operating Temperature Range FM3NT-10 40mm 30mm 40g PVC, Aluminium FM3NT-30 58mm 45mm 110g Polycarbonate, Aluminium IP67, IP68 at 2m for 24 hours Magnetic Masonry screws Gluing Clamping

-40C to +85C FM3NT-50 87mm 65mm 305g Polycarbonate, Aluminium IP67, IP68 at 1m for 24 hours, IP69K FM3NT-50(H) 87mm 65mm 305g Polycarbonate, Aluminium Magnetic Masonry screws Gluing Clamping

-40C to +85C 1.2.2 Physical Specifications FM3NT-50 and FM3NT-50H CHAPTER 1. OVERVIEW 3 1.2.3 Internal Battery FM3NT-10 and FM3NT-30 Model Battery Type Nominal Voltage Nominal Capacity Typical Battery Life Man-

Dioxide, FM3NT-30 Lithium Thionyl Chloride, non-

rechargeable 3.6V 4400mAh 4 years FM3NT-10 Lithium ganese non-rechargeable 3.0V 1000mAh 10 months At 20 minute reporting intervals, includ-

ing when acting as a relay node Consult with Senceive for your applica-

tion 1.2.4 Internal Battery FM3NT-50 and FM3NT-50H Model Battery Type Nominal Voltage Nominal Capacity Typical Battery Life FM3NT-50H Lithium Thionyl Chloride, non-

rechargeable 3.6V 19000mAh 12 to 15 years FM3NT-50 Lithium Thionyl Chloride, non-

rechargeable 3.6V 19000mAh 12 to 15 years At 30 minute reporting intervals, includ-

ing when acting as a relay node Consult with Senceive for your applica-

tion 1.2.5 FlatMesh Radio Specifications Communication Type Frequency Band Maximum Transmit Power Range RF Module Proprietary FlatMesh v3 Mesh Network-

ing Protocols IEEE 802.15.4 compliant 2400 - 2485 MHz ISM Band 6.5dBm

(EN 300 328 v2.1.1) Up to 270m depending on the environ-

ment Consult with Senceive for your applica-

tion Senceive FM3Nano CHAPTER 1. OVERVIEW 4 1.2.6 Tilt Sensor Specifications Resolution Repeatability Repeatability (High-G variant) Range

90 0.0001 (0.00175mm/m)

0.0005 (0.0087mm/m)

0.0025 (0.0436mm/m) Chapter 2 Installation The nodes will be delivered to you pre-configured. Simply affix the nodes to a structure within the range of the rest of the network. 2.1 Mounting There are several mounting options available, including those designed for:

clamping to a structure using straps magnetic mounting gluing to any surface fitting to an M8 threaded socket fixing to a FlatMesh tilt beam kit Ensure that the fixing is secure to ensure that tilt measurements are representative of the structure. 5 Chapter 3 Maintenance The product should not require any maintenance after installation. If the need to clean the product should arise, use only a damp cloth and mild detergent. Do not use any solvents as this may damage the enclosure. Warning Only service personnel authorised by the manufacturer may open the enclosure. No user serviceable parts are located inside. 6 Chapter 4 Support 4.1 Contact Information Senceive Limited Phone: +44 (0) 207 731 8269 Email: support@senceive.com Web: http://www.senceive.com For assistance and support, contact your supplier or the manufacturer:

7 Appendix A Import / Export Restrictions The products described in this user manual contain and use encryp-

tion algorithms for data authentication and security. Some countries require registration of these technologies. It is the importers respon-

sibility to comply with all local regulations. Contact Senceive for more information. 8

Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. 3. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The safe distance for human exposure to electromagnetic field is 20 cm. La distance de scurit pour l'exposition humaine au champ lectromagntique est de 20 cm.

lithium battery serviceable parts inside

; FMSNT 50 Triaxial Tilt Sensor High G a lithium battery rviceable parts inside o

Senceive Ltd.

&e Unit 7b & 7c Imperial Studios

@,e oe Fulham London SW6 2AG, UK nceive Call: +44 (0)20 7731 8269 Wireless condition monitoring email: info@senceive.com visit: senceive.com Authority to Act as Agent Date: November 11, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Sulis Consultants Limited is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: 08 November 2021 By: Mark Ferris

(Signature) (Print name) Title: CTO On behalf of: Senceive Limited

(Company Name) Telephone: +44 (0)207 731 8269 a eo a , Company Registration No. 05608752 et |

Ela tesa WAN VAT Registration No. 894 3446 85 reliable | robust | precise long-range | reliable | precise a Ri. 5 tl m

Request for Confidentiality Date: December 13, 2020 Subject: Confidentiality Request for: FCC ID:2AMFBFM3NTF and IC:24373-FM3NTF Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Permanent Permanent Permanent Permanent Permanent Block Diagrams Operation Description Parts List & Placement/BOM Tune-Up Procedure Schematics Senceive has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition"

would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Sincerely, Charlie Blackham Director Mead House, Longwater Road, Eversley, Hampshire, RG27 0NW, UK Sulis Consultants Limited Registered in England & Wales, number 05466247 http://www.sulisconsultants.com