Specifications EM 2000, EM 2050 RF characteristics Modulation Receiving frequency ranges Receiving frequencies Switching bandwidth Nominal/peak deviation Receiver principle Sensitivity (with HDX, peak deviation) Adjacent channel rejection Intermodulation attenuation Blocking Squelch Pilot tone squelch Antenna inputs Antenna outputs AF characteristics Compander system EQ presets Preset 1: Flat Preset 2: Low Cut Preset 3: Low Cut/High Boost Preset 4: High Boost S/N ratio (1 mV, peak devi-
ation) THD AF output voltage
(at peak deviation, 1 kHz AF) Adjustment range of audio output level Dw:
Bw:
Gw1:
GBw:
516 558 MHz 470 - 558 MHz 558 626 MHz 718 790 MHz 790 865 MHz 626 698 MHz 558 - 608 MHz 606 678 MHz wideband FM Aw:
Aw+:
Gw:
Cw:
up to 3,000 receiving frequencies, tuneable in steps of 25 kHz 20 frequency banks, each with up to 64 factory-preset chan-
nels, intermodulation-free 6 frequency banks, each with up to 64 user programmable channels up to 75 MHz 24 kHz / 48 kHz true diversity 2 V for 52 dBArms S/N typ. 80 dB typ. 75 dB 80 dB Off, 5 to 25 dBV in steps of 2 dB can be switched off 2 BNC sockets with booster supply voltage (11 VdB, 200 mA, cannot be switched off) 2 BNC sockets Sennheiser HDX
(switchable, affect the line and monitor outputs)
-
3 dB at 200 Hz 3 dB at 200 Hz
+5.5 dB at 10 kHz
+5.5 dB at 10 kHz 120 dBA 0.9 %
" (6.3 mm) jack socket (transformer balanced):
XLR-3M socket (transformer balanced):
49 dB (in steps of 1 dB), +6 dB gain reserve
+18 dBu
+18 dBu 575847_0918_A01_TD_2000er.indb 9 18.02.2019 12:42:41 2000 Series | 9 ENDEFRITESPTNLPLSEDKFIGRTRRUZHKOJACOMPLIANCE Overall device Temperature range Power supply Current consumption Dimensions EM 2000 EM 2050 10 C to +55 C (14 F to 131 F) 100 240 V ~
0.2 A 0.25 A approx. 217 x 483 x 43 mm
(8.54" x 19.02" x 1.69") Weight (incl. batteries) approx. 2600 g (5.73 lbs) approx. 2900 g (6.39 lbs) Connector assignment Audio
" (6.3 mm) stereo jack plug, transformer balanced EK 2000 RF characteristics Modulation Frequency ranges Receiving frequencies Switching bandwidth Nominal/peak deviation Receiver principle Sensitivity
(with HDX, peak deviation) Adjacent channel rejection Intermodulation attenuation Blocking Squelch Pilot tone squelch 10 | 2000 Series XLR-3F connector, transformer balanced
" (6.3 mm) stereo jack plug for headphone output
+
2 1 3 Dw:
Gw:
GBw:
516 558 MHz 558 626 MHz 718 790 MHz 790 865 MHz 626 698 MHz 606 678 MHz wideband FM Aw:
Bw:
Cw:
up to 3,000 receiving frequencies, tuneable in steps of 25 kHz 20 frequency banks, each with up to 64 factory-preset channels 6 frequency banks, each with up to 64 user programmable channels up to 75 MHz 24 kHz / 48 kHz adaptive diversity
< 4 V, typ. < 1.6 V for 52 dBAeff S/N typ. 80 dB typ. 78 dB 80 dB Off, 5 to 25 dBV, adjustable in steps of 2 dB can be switched off 575847_0918_A01_TD_2000er.indb 10 18.02.2019 12:42:42 AF characteristics Line Compander system S/N ratio
(1 mVRF, peak deviation) THD AF output voltage
(at peak deviation, 1 kHz AF) Output power at 2.4 V, 5 %
THD and nominal deviation Adjustment range of line output level Overall device Sennheiser HDX Line: 120 dBAeff Phones: approx. 90 dBAeff 0.9 %
Line: 3.5 mm jack socket: +17 dBu (mono, balanced) Phones: 2 x 12 mW at 32 42 dB, adjustable in steps of 6 dB 10 C to +55 C (14 F to 131 F) 2 AA batteries, 1.5 V (alkali manganese) or BA 2015 accupack 2.4 V at nominal voltage Temperature range Power supply Nominal voltage Power consumption:
with switched-off receiver 25 A Operating time
(line operation) Dimensions Weight (incl. batteries) typ. 9 hrs typ. 140 mA (30 mW) approx. 82 x 64 x 24 mm (3.23" x 2.52" x 0.95") approx. 130 g (0.29 lbs) Connector assignment 3.5 mm jack plug Line wired balanced Phones wired in parallel
+
+ +
SK 2000, SKM 2000 RF characteristics Modulation Frequency ranges wideband FM Aw:
Aw+:
Bw:
Cw:
516 558 MHz 470 - 558 MHz 558 626 MHz 718 790 MHz Dw:
Gw:
Gw1:
GBw:
790 865 MHz 626 698 MHz 558 - 608 MHz 606 678 MHz 2000 Series | 11 575847_0918_A01_TD_2000er.indb 11 18.02.2019 12:42:42 ENDEFRITESPTNLPLSEDKFIGRTRRUZHKOJACOMPLIANCE Transmission frequencies Switching bandwidth Nominal/peak deviation Frequency stability RF output power at 50 Pilot tone squelch AF characteristics Compander system AF frequency response Signal-to-noise ratio
(1 mV, peak deviation) THD Max. input voltage
(microphone/line) Input impedance up to 3,000 frequencies, tuneable in steps of 25 kHz 20 frequency banks, each with up to 64 factory-preset channels 6 frequency banks, each with up to 64 user programmable channels up to 75 MHz 24 kHz / 48 kHz 15 ppm switchable:
typ. 10 mW (Low) typ. 30 mW (Standard) typ. 50 mW (High) can be switched off SK 2000 Sennheiser HDX microphone: 80 18,000 Hz line: 25 18,000 Hz SKM 2000 80 18,000 Hz 120 dBA 0.9 %
3 Vrms microphone: 40 k, unbalan-
ced line: 1 M Adjustment range of input sensitivity 60 dB, adjustable in 3-dB steps 48 dB, adjustable in 6-dB steps Overall device SK 2000 SKM 2000 10 C to +55 C (14 F to 131 F) 2 AA batteries, 1.5 V (alkali manganese) or BA 2015 accupack 2.4 V typ. 185 mA (30 mW) typ. 180 mA (30 mW) 25 A typ. 8 hrs approx. 82 x 64 x 24 mm
(3.23" x 2.52" x 0.95") approx. 160 g (0.35 lbs) approx. 50 x 265 mm
( 1.97" x 10.43") approx. 380 g (0.84 lbs) Temperature range Power supply Nominal voltage Power consumption:
with switched-off trans-
at nominal voltage mitter Operating time Dimensions Weight (incl. batteries) 12 | 2000 Series 575847_0918_A01_TD_2000er.indb 12 18.02.2019 12:42:42 Connector assignment SK 2000 3-pin special audio connector Pin 1:
1 1 2 2 3 3 Pin 2:
Pin 3 and thread:
Microphone heads SKM 2000 Type Sensitivity Pick-up pattern Max. SPL Type MMD 835-1 dynamic 2.1 mV/Pa cardioid 154 dB SPL MMD 935-1 dynamic Sensitivity 2.5 mV/Pa Pick-up pattern cardioid AF and 5.2 V AB-powering; 8.2 k internal resistan-
ce, optimized for Sennheiser pre-polarized conden-
ser microphones
+5.2 V for guitar or ground ground MMD 845-1 dynamic 1.6 mV/Pa supercardioid 154 dB SPL MME 865-1 condenser 1.6 mV/Pa supercardioid 152 dB SPL MMD 845-1 dynamic MMK 965-1 externally polarized dual dia-
phragm conden-
ser microphone 5.7 mV/Pa 1.8 mV/Pa supercardioid cardioid/
1.8 mV/Pa supercardioid, switchable 144 dB SPL 154 dB SPL MD 9235 dynamic 1.8 mV/Pa cardioid 163 dB SPL Max. SPL 154 dB SPL 154 dB SPL SKP 2000 RF characteristics Modulation Frequency ranges Transmission frequencies Switching bandwidth Nominal/peak deviation Frequency stability Dw:
Gw:
Gw1:
GBw:
516 558 MHz 470 - 558 MHz 558 626 MHz 718 790 MHz 790 865 MHz 626 698 MHz 558 - 608 MHz 606 678 MHz wideband FM Aw:
Aw+:
Bw:
Cw:
up to 3,000 frequencies, tuneable in steps of 25 kHz 20 frequency banks, each with up to 64 factory-preset channels 6 frequency banks, each with up to 64 user programmable channels up to 75 MHz 24 kHz / 48 kHz 15 ppm 575847_0918_A01_TD_2000er.indb 13 18.02.2019 12:42:42 2000 Series | 13 ENDEFRITESPTNLPLSEDKFIGRTRRUZHKOJACOMPLIANCE RF output power at 50 Pilot tone squelch AF characteristics Compander system AF frequency response Signal-to-noise ratio
(1 mV, peak deviation) THD Max. input voltage Input impedance Adjustment range of input sensitivity Overall device switchable:
typ. 10 mW (Low) typ. 30 mW (Standard) typ. 50 mW (High) can be switched off Sennheiser HDX 80 18,000 Hz 120 dBA 0.9 %
6 Vrms 6 k, balanced 48 dB adjustable in steps of 6 dB Temperature range Power supply Nominal voltage Power consumption:
with switched-off plug-on at nominal voltage transmitter Operating time Dimensions Weight (incl. batteries) 10 C to +55 C (14 F to 131 F) 2 AA batteries, 1.5 V (alkali manganese) or BA 2015 accupack 2.4 V typ. 210 mA (30 mW RF, w/o P48) 25 A typ. 7 hrs (30 mW RF, w/o P48) approx. 105 x 43 x 43 mm (4.13" x 1.69" x 1.69") approx. 195 g (0.43 lbs) Connector assignment XLR-3 socket (female), balanced (Audio In)
+
2 1 3 14 | 2000 Series 575847_0918_A01_TD_2000er.indb 14 18.02.2019 12:42:42 Manufacturer declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on these products. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. In compliance with the following requirements WEEE Directive (2012/19/EU) Battery Directive (2006/66/EC & 2013/56/EU) Notes on disposal The symbol of the crossed-out wheeled bin (imprint available depending on national require-
ments) on the product, the battery/rechargeable battery and/or the packaging indicates that these products must be disposed of separately at the end of their operational lifetime in accor-
dance with the national legislation. For packaging disposal, please observe the legal regulations on waste segregation applicable in your country. The separate collection of waste electrical and electronic equipment, batteries/rechargeable batteries and packagings is used to promote the reuse and recycling and to prevent negative effects caused by e.g. potentially hazardous substances contained in these products. Herewith you make an important contribution to the protection of the environment and public health. EU Declaration of conformity RoHS Directive (2011/65/EU) Hereby, Sennheiser electronic GmbH & Co. KG declares that the radio equipment type SKM 2000, SK 2000, SKP 2000, EM 2000, EM 2050, EK 2000 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.sennheiser.com/download. 575847_0918_A01_TD_2000er.indb 15 18.02.2019 12:42:43 2000 Series | 15 ENDEFRITESPTNLPLSEDKFIGRTRRUZHKOJACOMPLIANCE Statements regarding the FCC and Industry Canada rules This device complies with part 15 of the FCC rules and RSS-210 / ICES-003 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follo-
wing measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/ TV technician for help. This Class B digital apparatus complies with the Canadian ICES-003. Changes or modifications not expressly approved by Sennheiser electronic Corp. could void the users authority to operate the equipment. Before putting the device into operation, please observe the respective country-specific regu-
lations!
RSS-210 Issue 9 Annex G.1 This device operates on a no-protection, no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canadas document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-Power Ra-
dio Apparatus in the TV Bands. 16 | 2000 Series 575847_0918_A01_TD_2000er.indb 16 18.02.2019 12:42:43 Caractristiques techniques EM 2000, EM 2050 Caractristiques HF Modulation Plage de frquences Frquences de rception Dw:
Gw:
Gw1:
GBw:
516 558 MHz 470 - 558 MHz 558 626 MHz 718 790 MHz FM bande large Aw:
790 865 MHz Aw+:
626 698 MHz Bw:
558 - 608 MHz Cw:
606 678 MHz jusqu 3.000 frquences, rglables par pas de 25 kHz 20 banques de frquences avec respectivement jusqu 64 canaux prrgls en usine, exempts dintermodulation 6 banques de frquences avec respectivement jusqu 64 canaux programmables au choix jusqu 75 MHz 24 kHz / 48 kHz True Diversity 2 V pour 52 dBAeff S/N Largeur de bande de com-
mutation Excursion nominale/crte Principe du rcepteur Sensibilit (avec HDX, excur-
sion crte) Rejection du canal adjacent typ. 80 dB Attnuation dintermodulation typ. 75 dB Blocking Systme anti-bruit (squelch) Off, 5 25 dB V rglable par pas de 2 dB Squelch signal pilote Entres dantenne 80 dB dsactivable 2 prises BNC avec tension dalimentation booster (11 VdB, 200 mA, non dsactivable) 2 prises BNC Sorties dantenne Caractristiques BF Systme de rduction de bruit Prrglages EQ Preset 1: Flat Preset 2: Low Cut Preset 3: Low Cut/High Boost Preset 4: High Boost Rapport signal/bruit
(1 mV, excursion crte) DHT Tension de sortie BF
(excursion crte, 1 kHz BF) Plage de rglage du niveau de sortie audio Sennheiser HDX
(commutables, agissant sur les sorties Line et Monitor)
-
3 dB 200 Hz 3 dB 200 Hz
+5,5 dB 10 kHz
+5,5 dB 10 kHz 120 dBA 0,9 %
prise jack 6,3 mm (symtris par transformateur):
prise XLR (symtris par transformateur):
49 dB (rglable par pas de 1 dB), +6 dB de rserve de gain
+18 dBu
+18 dBu 2000 Series | 17 575847_0918_A01_TD_2000er.indb 17 18.02.2019 12:42:43 ENDEFRITESPTNLPLSEDKFIGRTRRUZHKOJACOMPLIANCE Gnralits Plage de temprature Alimentation Consommation Dimensions EM 2000 EM 2050 10 C +55 C (14 F to 131 F) 100 240 V ~
0,2 A 0,25 A env. 217 x 483 x 43 mm
(8.54" x 19.02" x 1.69") Poids (avec piles) env. 2600 g (5.73 lbs) env. 2900 g (6.39 lbs) Connecteur XLR-3F, symt-
ris par transformateur Jack stro 6,3 mm pour sortie casque
+
2 1 3 Brochage des connecteurs Audio Jack stro 6,3 mm, symt-
ris par transformateur EK 2000 Caractristiques HF Modulation Plages de frquences Frquences de rception Dw:
Gw:
GBw:
516 558 MHz 558 626 MHz 718 790 MHz FM bande large Aw:
790 865 MHz Bw:
626 698 MHz Cw:
606 678 MHz jusqu 3.000 frquences, rglables par pas de 25 kHz 20 banques de frquences avec respectivement jusqu 64 canaux prrgls en usine, exempts dintermodulation 6 banques de frquences avec respectivement jusqu 64 canaux programmables au choix jusqu 75 MHz 24 kHz / 48 kHz Adaptive Diversity
< 4 V, typ. < 1,6 V pour 52 dBAeff S/N Largeur de bande de com-
mutation Excursion nominale/crte Principe du rcepteur Sensibilit
(avec HDX, excursion crte) Rejection du canal adjacent typ. 80 dB Attnuation dintermodulation typ. 78 dB Blocking Systme anti-bruit (squelch) Off, 5 25 dB V rglable par pas de 2 dB Squelch signal pilote dsactivable 80 dB 18 | 2000 Series 575847_0918_A01_TD_2000er.indb 18 18.02.2019 12:42:44 Caractristiques BF Ligne Systme de rduction de bruit Rapport signal/bruit
(1 mVHF, excursion crte) DHT Tension de sortie BF
(excursion crte, 1 kHz BF) Puissance de sortie 2,4 V, 5 % DHT, excursion nominale Plage de rglage du niveau de sortie ligne Gnralits Plage de temprature Alimentation Tension nominale Consommation:
tension nominale avec le rcepteur teint Autonomie (fonctionnement ligne) Dimensions Poids (avec piles) Brochage des connecteurs Connecteur jack 3,5 mm Ligne cblage symtrique Sennheiser HDX Line: 120 dBAeff Phones: env. 90 dBAeff 0,9 %
Ligne: prise jack 3,5 mm: +17 dBu (mono, symtrique) Phones: 2 x 12 mW 32 42 dB, rglable par pas de 6 dB 10 C +55 C (14 F to 131 F) 2 piles (AA, alcaline au manganse), 1,5 V ou pack accu BA 2015 2,4 V typ. 140 mA (30 mW) 25 A typ. 9 heures env. 82 x 64 x 24 mm (3.23" x 2.52" x 0.95") env. 130 g (0.29 lbs) Phones cblage en parallle
+
+ +
SK 2000, SKM 2000 Caractristiques HF Modulation Plage de frquences FM bande large Aw:
Aw+:
Bw:
Cw:
516 558 MHz 470 - 558 MHz 558 626 MHz 718 790 MHz Dw:
Gw:
Gw1:
GBw:
790 865 MHz 626 698 MHz 558 - 608 MHz 606 678 MHz 2000 Series | 19 575847_0918_A01_TD_2000er.indb 19 18.02.2019 12:42:44 ENDEFRITESPTNLPLSEDKFIGRTRRUZHKOJACOMPLIANCE Frquences dmission jusqu 3.000 frquences, rglables par pas de 25 kHz 20 banques de frquences avec respectivement jusqu 64 canaux prrgls en usine 6 banques de frquences avec respectivement jusqu 64 can-
aux programmables au choix jusqu 75 MHz Largeur de bande de com-
mutation Excursion nominale/crte Stabilit de frquence Puissance de sortie HF 50 commutable:
24 kHz / 48 kHz 15 ppm typ. 10 mW ( Low ) typ. 30 mW ( Standard ) typ. 50 mW ( High ) dsactivable Squelch signal pilote Caractristiques BF Systme de rduction de bruit Rponse en frquence Rapport signal/bruit
(1 mV, excursion crte) DHT Tension dentre max.
(microphone/ligne) Impdance dentre SK 2000 SKM 2000 Sennheiser HDX microphone: 80 18.000 Hz ligne: 25 18.000 Hz 80 18.000 Hz 120 dBA 0,9 %
3 Veff microphone: 40 k, asym-
trique ligne: 1 M Plage de rglage de la sensi-
bilit dentre 60 dB, rglable par pas de 3 dB 48 dB, rglable par pas de 6 dB Gnralits Plage de temprature Alimentation Tension nominale Consommation:
tension nominale avec lmetteur de poche teint Autonomie Dimensions Poids (avec piles) 20 | 2000 Series SK 2000 SKM 2000 10 C +55 C (14 F to 131 F) 2 piles (AA, alcaline au manganse), 1,5 V ou pack accu BA 2015 2,4 V typ. 185 mA (30 mW) typ. 180 mA (30 mW) 25 A typ. 8 heures env. 82 x 64 x 24 mm
(3.23" x 2.52" x 0.95") env. 160 g (0.35 lbs) env. 50 x 265 mm
( 1.97" x 10.43") env. 380 g (0.84 lbs) 575847_0918_A01_TD_2000er.indb 20 18.02.2019 12:42:44 Brochage des connecteurs SK 2000 Connecteur audio spcial 3 broches Pin 1:
1 1 2 2 3 3 Pin 2:
Pin 3 et filetage:
signal audio et alimentation AB 5,2 V; rsistance in-
terne de 8,2 k, optimise pour les micros statiques prpolariss Sennheiser
+5,2 V pour guitare ou masse masse Ttes de micro SKM 2000 Type Sensibilit Directivit Max. SPL Type Sensibilit Directivit MMD 835-1 dynamique 2,1 mV/Pa cardiode 154 dB SPL MMD 845-1 dynamique 1,6 mV/Pa supercardiode 154 dB SPL MME 865-1 statique 1,6 mV/Pa supercardiode 152 dB SPL MMD 935-1 dynamique MMD 845-1 dynamique 2,5 mV/Pa 1,8 mV/Pa cardiode super-
cardiode MMK 965-1 micro statique avec double dia-
phragme polari-
sation externe 5,7 mV/Pa 1,8 mV/Pa cardiode/
supercardiode, commutable 144 dB SPL 154 dB SPL MD 9235 dynamique 1,8 mV/Pa cardiode 163 dB SPL Max. SPL 154 dB SPL 154 dB SPL SKP 2000 Caractristiques HF Modulation Plages de frquences Frquences dmission Largeur de bande de com-
mutation Dw:
Gw:
Gw1:
GBw:
516 558 MHz 470 - 558 MHz 558 626 MHz 718 790 MHz FM bande large 790 865 MHz Aw:
626 698 MHz Aw+:
558 - 608 MHz Bw:
606 678 MHz Cw:
jusqu 3.000 frquences, rglables par pas de 25 kHz 20 banques de frquences avec respectivement jusqu 64 canaux prrgls en usine 6 banques de frquences avec respectivement jusqu 64 canaux programmables au choix jusqu 75 MHz 575847_0918_A01_TD_2000er.indb 21 18.02.2019 12:42:45 2000 Series | 21 ENDEFRITESPTNLPLSEDKFIGRTRRUZHKOJACOMPLIANCE Excursion nominale/crte Stabilit de frquence Puissance de sortie HF 50 commutable:
24 kHz / 48 kHz 15 ppm typ. 10 mW ( Low ) typ. 30 mW ( Standard ) typ. 50 mW ( High ) dsactivable Squelch signal pilote Caractristiques BF Systme de rduction de bruit Rponse en frquence Rapport signal/bruit
(1 mV, excursion crte) DHT Tension dentre max. Impdance dentre Plage de rglage de la sensi-
bilit dentre Gnralits Plage de temprature Alimentation Tension nominale Consommation:
tension nominale avec lmetteur plug-on teint Autonomie Dimensions Poids (avec piles) Sennheiser HDX 80 18.000 Hz 120 dBA 0,9 %
6 Veff 6 k, symtrique 48 dB, rglable par pas de 6 dB 10 C +55 C (14 F to 131 F) 2 piles (AA, alcaline au manganse), 1,5 V, ou pack accu BA 2015 2,4 V typ. 210 mA (30 mW HF, sans P48) 25 A typ. 7 heures (30 mW HF, sans P48) env. 105 x 43 x 43 mm (4.13" x 1.69" x 1.69") env. 195 g (0.43 lbs) Brochage des connecteurs Prise XLR-3 (femelle), symtrique (Audio In)
+
2 1 3 22 | 2000 Series 575847_0918_A01_TD_2000er.indb 22 18.02.2019 12:42:45 Dclarations du fabricant Garantie Sennheiser electronic GmbH & Co. KG offre une garantie de 24 mois sur ce produit. Pour avoir www.sennheiser.com ou contactez votre partenaire Sennheiser. les conditions de garantie actuelles, veuillez visiter notre site web sur En conformit avec les exigences suivantes Directive DEEE (2012/19/UE) Directive Piles et Accumulateurs (2006/66/CE & 2013/56/UE) Notes sur la gestion de fin de vie Le symbole de la poubelle sur roues barre dune croix (impression disponible selon les directi-
ves nationales) sur le produit, la pile/batterie et/ou lemballage signifie que ces produits, arrivs en fin de vie, doivent faire lobjet dune collecte spare en respectant la lgislation nationale. Pour les dchets demballages, veuillez respecter les lois applicables dans votre pays en matire de tri slectif des dchets. Lobjectif principal de la collecte spare des dchets dquipements lectriques et lectro-
niques, des piles/batteries et des emballages est de promouvoir le remploi et/ou le recyclage et de prvenir les effets ngatifs sur la sant et lenvironnement dus des polluants potentielle-
ment contenus. Vous contribuerez ainsi la prservation de lenvironnement et la protection de la sant. Dclaration UE de conformit Directive RoHS (2011/65/UE) Le soussign, Sennheiser electronic GmbH & Co. KG, dclare que lquipement radiolectrique du type SKM 2000, SK 2000, SKP 2000, EM 2000, EM 2050, EK 2000 est conforme la directive 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible ladresse internet suivante:
www.sennheiser.com/download. 575847_0918_A01_TD_2000er.indb 23 18.02.2019 12:42:45 2000 Series | 23 ENDEFRITESPTNLPLSEDKFIGRTRRUZHKOJACOMPLIANCE Declaration requise par la FCC et lIndustry Canada Cet appareil est conforme la Partie 15 des rglementations de la FCC et la norme CNR-210
/ NMB-003 dIndustrie Canada. Lutilisation de lappareil doit respecter les deux conditions sui-
vantes:
(1) Lappareil ne doit pas produire dinterfrences nuisibles, et,
(2) il doit accepter toutes interferences reues, y compris celles qui pourraient avoir des effets non dsirs sur son fonctionnement. Cet quipement a t test et trouv conforme aux limites dfinies pour un dispositif numrique de classe B, dans le cadre de la Partie 15 des rglementations de la FCC. Ces limites sont conu-
es pour offrir une protection raisonnable contre les interfrences nocives pour une installati-
on rsidentielle. Cet quipement produit, utilise et peut mettre une nergie haute frquence et, sil nest pas install et utilis conformment aux instructions, provoquer des interfrences gnantes pour les communications radio. Des risques dinterfrences ne peuvent toutefois pas tre totalement exclus dans certaines installations. Dans le cas dinterfrences gnantes pour la rception des missions de radio ou tldiffuses (il suffit, pour le constater, dallumer et dtein-
dre lquipement), lutilisateur est invit prendre lune des mesures suivantes pour les liminer:
Rorienter ou dplacer lantenne rceptrice. Eloigner lquipement du rcepteur. Brancher lquipement sur une prise ou un circuit diffrent de celui du rcepteur. Consulter un revendeur ou un technicien de radio ou tlvision expriment. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Toute modification non expressment approuve par Sennheiser electronic Corp. peut annuler le droit de lutilisateur lemploi de lquipement en question. Avant dutiliser lappareil, veuillez observer les dispositions lgales en vigueur dans votre pays!
RSS-210 Issue 9 Annex G.1 Ce dispositif fonctionne selon un rgime de non brouillage et de non protection. Si lutilisateur devait chercher obtenir une certaine protection contre dautres services radio fonctionnant dans les mmes bandes de tlvision, une licence radio serait requise. Pour en savoir plus, veuil-
lez consulter la Circulaire des procdures concernant les clients CPC 2 1 28, Dlivrance de licen-
ces sur une base volontaire pour les appareils radio de faible puissance exempts de licence et exploits dans les bandes de tlvision dInnovation, Sciences et Dveloppement conomique Canada. 24 | 2000 Series 575847_0918_A01_TD_2000er.indb 24 18.02.2019 12:42:45