FCC ID: DMOSKMXSW Wireless handheld microphone

XS WIRELESS 1 Quick Guide Kurzanleitung | Guide rapide | Guida rapida | Gua de inicio rpido | Guia rpido | Beknopte handleiding | Krtka instrukcja obsugi |

Snabbguide | Quickguide | Quick Guide | | | | |

In the box Vocal Sets Instrument Sets XS WIRELESS 1 XSW 1-

825 XSW 1-

835 XSW 1-

CI1 XSW 1-

908 Lavalier Set XSW 1-

ME2 Headmic Set XSW 1-

ME3 Battery 1 2 EM-XSW 1 NT 12-5CW SKM 825-XSW MZQ 1 SK-XSW SKM 835-XSW e 908T ME 2 ME 3 CI 1-N 2 x AA LR6 1.5 Setup OR XLR-3 6.3 mm 3 1 2 3 Low battery On/off 1s on 3s off OR OR Bank Ch. 1 1 925.300 MHz

~ 10 h

~ 7 h

~ 3 h Low Batt OR Bank Ch. 1 1 925.300 MHz EU US UK Display EM-XSW 1 Bank 1...8 Channel 0...9 KOR AU Sensitivity Sync Low battery ME 2 e 908T Volume 0...9 ME 3 CI 1-N 0 1 2 3 4 5 6 7 8 9 Mute Audio on Audio off Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Taiwan, Publ. 10/21, 571312/A02 Unbenannt-1 2 22.06.2016 09:05:01 Change frequency Automatically/Scan Sync Off 1 3 3s 2 4 2 4 OR Bank Channel Manually 1 3 5 Sensitivity Level 0 dB 10 dB 20 dB 30 dB ME 2 ME 3 25 cm

(10") OR Bank Ch. 1 1 925.300 MHz hold hold 1 2 1x OR Bank Ch. 2 3 929.100 MHz max. 10 ch. Multichannel Bank 1...8 0...9 Ch. Bank Ch. Bank Ch. Bank Ch. Bank Ch. 2 3 1 1 2 3 2 3 2 4 1 2 1 3 2 3 2 5 1 3 4 7 2 3 2 6 1 8 8 9 2 3 2...3 cm

(1") Min. distance SKM Guitar pickup Squelch min. SQ max. SQ

> 5 m

(16'5'')

> 20 cm

(8'')

www.sennheiser.com/XSW1 Unbenannt-1 1 22.06.2016 09:04:59 578659_1017_A01_Quick_Guide_XSW1_DUAL.pdf 1 17.08.2017 16:12:01 XS WIRELESS 1 DUAL Quick Guide Kurzanleitung | Guide rapide | Guida rapida | Gua de inicio rpido | Guia rpido | Beknopte handleiding | Krtka instrukcja obsugi |

Snabbguide | Quickguide | Quick Guide | | | | |

In the box Vocal Sets Battery XS WIRELESS 1 DUAL XSW 1-825 DUAL XSW 1-835 DUAL 1 2 EM-XSW1 DUAL MZQ 1 AA LR6 1.5 V Setup XLR-3 3 Low battery NT 12-5CW SKM-XSW e825 SKM-XSW e835 1 2

2 4 1

2 2 4 On/off 1s on 3s off Display OR 6.3 mm 6.3 mm Bank Ch. 1 1 925.300 MHz

~ 10 h

~ 7 h

~ 3 h Low Batt Bank Ch. 1 1 925.300 MHz EM-XSW1 DUAL Bank 1...8 Channel 0...9 Sensitivity Sync Low battery EU US UK Volume 0...9 Mute KOR AU 0 1 2 3 4 5 6 7 8 9 Audio on Audio off Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Taiwan, Publ. 10/17, 578659/A01 Bank Ch. 1 1 925.300 MHz 1x Bank Ch. 2 3 929.100 MHz 578659_1017_A01_Quick_Guide_XSW1_DUAL.pdf 2 17.08.2017 16:12:02 2 4 2 4 Change frequency Automatically/Scan Off 1 3 3s Bank Channel Manually 1 3 5 Multichannel Bank 1...8 0...9 Ch. Sync hold 1 2 Sensitivity 0 dB 10 dB Level max. 10 ch. Bank Ch. Bank Ch. Bank Ch. Bank Ch. 2 4 1 2 1 3 2 3 2 5 1 3 4 7 2 3 2 6 1 8 8 9 2 3 2 3 1 1 2 3 2 3 Squelch Min. distance SKM min. SQ max. SQ

> 5 m

(16'5'')

www.sennheiser.com/XSW1DUAL

XS WIRELESS 1 Quick Guide Kurzanleitung | Guide rapide | Guida rapida | Gua de inicio rpido | Guia rpido | Beknopte handleiding | Krtk Snabbguide | Quickguide | Quick Guide | | | | |

In the box Vocal Sets Instrument Sets Lavalier Set Headmic Set Battery XS WIRELESS 1 XSW 1-

825 XSW 1-

835 XSW 1-

CI1 XSW 1-

908 XSW 1-

ME2 XSW 1-

ME3 1 2 EM-XSW 1 NT 12-5CW SKM-XSW MZQ 1 SK-XSW e 908T ME 2-2 ME 3-II CI 1-N 2 x AA LR6 1.5 Setup 2 9 7 m m OR XLR-3 6.3 mm 3 1 2 3 Low battery On/off 1s on 3s off OR OR Bank Ch. 1 1 925.300 MHz

~ 10 h

~ 7 h

~ 3 h Low Batt OR Bank Ch. 1 1 925.300 MHz EU US UK Display EM-XSW 1 Bank 1...8 Channel 0...9 KOR AU Sensitivity Sync Low battery ME 2-2 e 908T Volume 0...9 ME 3-II CI 1-N 0 1 2 3 4 5 6 7 8 9 Mute Audio on Audio off Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Taiwan, Publ. 05/16, 571312/A01 Unbenannt-1 2 22.06.2016 09:05:01 Change frequency Automatically/Scan Sync Off 1 3 3s 2 4 Bank Channel Manually 1 3 5 Sensitivity Level 0 dB 10 dB 20 dB 30 dB 2 4 OR OR Bank Ch. 1 1 925.300 MHz hold hold 1 2 1x OR Bank Ch. 2 3 929.100 MHz max. 10 ch. Multichannel Bank 1...8 Ch. 0...9 ME 2-2 ME 3-II 25 cm

(10") Bank Ch. Bank Ch. Bank Ch. Bank Ch. 2 3 1 1 2 3 2 3 2 4 1 2 1 3 2 3 2 5 1 3 4 7 2 3 2 6 1 8 8 9 2 3 2...3 cm

(1") Min. distance SKM Guitar pickup Squelch min. SQ max. SQ

> 5 m

(165)

> 20 cm

(8)

?

www.sennheiser.com/XSW1 Unbenannt-1 1 22.06.2016 09:04:59

XS WIRELESS 1 Technische Daten Specifications Caractristiques techniques Dati tecnici Especificaciones tcnicas Dados tcnicos Technische specificaties Dane techniczne Tekniska data Tekniske data Tekniset tiedot

571314_0516_A01_TD_XSW1_SP15.indb 1 18.07.2016 14:46:30 Specifications System Modulation Frequency ranges wideband FM A: 548 to 572 MHz GB: 606 to 630 MHz B: 614 to 638 MHz C: 766 to 790 MHz D: 794 to 806 MHz E: 821 to 832 MHz and 863 to 865 MHz K: 925 to 937.5 MHz Switching bandwidth up to 24 MHz Frequencies Signal-to-noise ratio THD Temperature range 8 frequency banks, each with up to 10 factory-preset channels

103 dBA

0.9%

operation: 0C to +40C storage: 20C to +70C Transmitter synchronization 2.4 GHz, Low Power OQPSK (only active during synchronization) Receiver Receiver principle Diversity principle Sensitivity (at peak deviation) AF frequency response Max. AF output voltage

(at peak deviation, 1 kHz AF) double superheterodyne antenna switching diversity via internal antennas

< 3 V at 52 dB(A)rms S/N 50 to 16,000 Hz ( 3 dB) 1/4" (6.3 mm) jack socket (unbalanced): +6 dBu XLR socket (balanced): +12 dBu Audio adjustment range 45 dB, adjustable in 5-dB steps Power supply Squelch Line/Mic level Housing material 12 V DC nom. / 300 mA adjustable from 3 dBV to 28 dBV (combined with pilot tone) 20 dB, switchable rugged ABS housing Dimensions (W x H x D) approx. 200 x 42 x 127 mm Weight approx. 340 g E D N E R F T I S E T P L N L P E S K D I F R G U R H Z O K E C N A I L P M O C 571314_0516_A01_TD_XSW1_SP15.indb 1 18.07.2016 14:46:33 XS WIRELESS 1 | 1 Transmitters SK SKM 825 SKM 835 RF output power AF frequency response Audio input Max. input voltage

(Mic/Line) at 3% THD Power supply Operating time Microphone type Input sensitivity (capsule) Pick-up pattern Adjustment range of transmitter sensitivity Housing material Dimensions Weight 10 mW 80 to 14,000 Hz 80 to 16,000 Hz 50 to 16,000 Hz (Line) 80 to 16,000 Hz (Mic) 3.5 mm jack socket typ. 1.5 VRMS Mic/

typ. 2.6 VRMS Line

@ 30 dB Gain 2 AA size batteries, 1.5 V 2 AA size batteries, 1.5 V approx. 10 hours dynamic 1.5 mV/Pa cardioid 0 to 30 dB, adjustable in 10-dB steps rugged ABS housing approx. 71 x 96 x 28 mm

(W x H x D) approx. 95 g approx. 260 x 84 mm

(L x ) approx. 245 g Microphones ME 2-2 ME 3-II e 908T Transducer principle Sensitivity Pick-up pattern Max. SPL condenser, pre-polarized condenser, pre-polarized condenser, pre-polarized 20 mV/Pa 1.6 mV/Pa 0.6 mV/Pa omni-directional cardioid super-cardioid 130 dB 150 dB 147 dB 2 | XS WIRELESS 1 571314_0516_A01_TD_XSW1_SP15.indb 2 18.07.2016 14:46:34 In compliance with (EM, SK and SKM) Europe EMC Radio Safety EN 301489-1/-3/-9 EN 300422-2, EN 301440 EN 60065, EN 62311 (SAR) Approved by (EM) Canada:

USA:

Approved by (SK) Canada:

USA:

Approved by (SKM) Canada:

USA:

Industry Canada RSS 210, RSS 310 IC: 2099A-EMXSW1 FCC Part 15 B & C, FCC-ID: DMOEMXSW1 Industry Canada RSS 210, IC 2099A-SKXSW FCC-Part 74, FCC-ID: DMOSKXSW FCC-Part 15 C, limited to 698 MHz Industry Canada RSS 210, IC 2099A-SKMXSW FCC-Part 74, FCC-ID: DMOSKMXSW FCC-Part 15 C, limited to 698 MHz Connector assignment EM SK 1/4" (6.3 mm) mono jack plug XLR-3 connector 3.5 mm jack plug

+

2 1 3 E D N E R F T I S E T P L N L P E S K D I F R G U R H Z O K E C N A I L P M O C 571314_0516_A01_TD_XSW1_SP15.indb 3 18.07.2016 14:46:35 XS WIRELESS 1 | 3 NT 12-5CW power supply unit Nominal input voltage Power frequency Input current Nominal output voltage Standby power consumption Energy efficiency level Temperature range Storage temperature Relative air humidity Weight (without adapter) 100 to 240 V~

50 or 60 Hz max. 200 mA 12 V

0.1 W VI 0C to +40C 20C to +60C max. 95%

approx. 65 g In compliance with:

Europe USA/Canada China EMC Safety RoHs Energy efficiency level Commission Regulation

(EU) No. EMC Safety EN 55032, EN 55024 EN 60950-1 EN 50581 V 278/2009 and 1275/2008 FCC 47 CFR 15 B ICES 003, CAN ICES-3(B)/NMB-3(B) UL 60950-1 CAN/CSA-C22.2 No. 60950-1 Energy efficiency level DOE Level VI EMC Safety RoHS GB13837, GB17625 GB8898 Australia/New Zealand EMC Safety AS/NZS CISPR 22 AS/NZS 60950-1 4 | XS WIRELESS 1 571314_0516_A01_TD_XSW1_SP15.indb 4 18.07.2016 14:46:35 Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the cur-

rent warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. FOR AUSTRALIA ONLY Sennheiser goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is in addition to other rights or remedies under law. Nothing in this warranty excludes, limits or modifies any liability of Sennheiser which is imposed by law, or limits or modifies any remedy available to the consumer which is granted by law. To make a claim under this warranty, contact Sennheiser Australia Pty Ltd, Unit 3, 31 Gibbes Street Chatswood NSW 2067, AUSTRALIA. Phone: (02) 9910 6700, email: service@sennheiser.com.au. All expenses of claiming the warranty will be borne by the person making the claim. The Sennheiser International Warranty is provided by Sennheiser Australia Pty Ltd (ABN 68 165 388 312), Unit 3, 31 Gibbes Street Chatswood NSW 2067 Australia. In compliance with the following requirements WEEE Directive (2012/19/EU) Please dispose of the products at the end of their operational lifetime by taking them to your local collection point or recycling center for such equipment. Battery Directive (2013/56/EU) The supplied batteries can be recycled. Please dispose of them as special waste or return them to your specialist dealer. To protect the environment, only dispose of exhausted batteries. CE Declaration of Conformity RoHS Directive (2011/65/EU) Radio Equipment Directive (2014/53/EU) EMC Directive (2014/30/EU) Low Voltage Directive (2014/35/EU) The declaration is available at www.sennheiser.com. Before putting into operation, please observe the respective country-specific regulations. E D N E R F T I S E T P L N L P E S K D I F R G U R H Z O K E C N A I L P M O C 571314_0516_A01_TD_XSW1_SP15.indb 5 18.07.2016 14:46:35 XS WIRELESS 1 | 5 FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-

tions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesi-

red operation. This class B digital device complies with the Canadian ICES-003. Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void the FCC authorization to operate this equipment. Before putting the device into ope-

ration, please observe the respective country-specific regulations!

Radiofrequency radiation exposure information:

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled en-

vironment. The XSW 1 should be installed and operated with a minimum distance of 20 cm between the radiator and your body. 6 | XS WIRELESS 1 571314_0516_A01_TD_XSW1_SP15.indb 6 18.07.2016 14:46:35

Z| SENNHEISER

>KM-XSW dandheld Transmitter rod. Code: 250001 er. No.:

req. Range A: 548 - 572 MHz ACE BK hy, a ANATEL 01188-17-07356 CC ID: DMOSKMXSW

=: 2099A-SKMXSW AN ICES-3 (B)/NMB-3(B) Made in Taiwan ennheiser electronic GmbH & Co. KG m Labor 1, 30900 Wedemark, Germany ee a ae

Date (13/06/2023) TUV SUD BABT FCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL FCC ID: DMOSKMXSW, DMOSKXSW, DMOEMXSW1D IC: 2099A-SKMXSW, 2099A-SKXSW, 2099A-EMXSW1, 2099A-EMXSW2, 2099A-EMXSW1D Dear Sir or Madam, We, Sennheiser electronic GmbH & Co. KG, hereby authorize Taiwan Testing and Certification Center, Mr. Kevin Lee (NO. 34. LIN 5, DINGFU VIL., LINKOU DIST., NEW TAIPEI CITY, TAIWAN, 24442, R.O.C., +886-2-26023052 ext. 20) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 30/09/2023 Sincerely, Name: Nils Knauer Title: Regulatory Compliance Manager

Class II Permissive Change Letter Date (18/08/2023) TUV SUD BABT FCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, The purpose of this letter is to request Class II Permissive Change for:

FCC ID:

DMOSKMXSW Pursuant to CFR 2.1043, (Sennheiser Electronic Corp) hereby requests a Class II Permissive Change. The changes filed to this application are:

Main components Current supplier / Part No. Ceramic Trimmer Capacitor muRata / TZY2Z100A001R00 New supplier / Part No. REMOVED

(LAYOUT CHANGED)

(in the oscillator, UHF Part) 26 MHz Crystal ( assembled on 2.4 GHz module) YOKETAN / S5032A-026000-F20-

BBY-YMA TAI-SAW / TZ0808A 26 MHz crystal (clock for CC 2500) is pin-for pin compatible

- The crystal has the same basic function as the previous crystal

2.4 GHz RF parameter are not affected Thank you for your attention in this matter. Sincerely, Name: i.A. Nils Knauer Title: Regulatory Compliance Manager

Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 DATE : 2023/04/27 FCC ID: DMOSKMXSW Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description Parts List or Tune Up Information These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company (Sennheiser Electronic Corp) and provide unjustified benefits to our competitors. Nils Knauer Regulatory Compliance Manager Nils.Knauer@sennheiser.com

Covered Equipment Certification Attestation Letter 8/25/2023 TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL ATTN.: Reviewing Engineer FCC ID: DMOSKMXSW, DMOSKXSW, DMOEMXSW1D Sennheiser Electronic Corporation (the applicant) certifies that the models EM-XSW1, EM-XSW2, SK-XSW and SKM-XSW with FCC IDs stated above, for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sennheiser Electronic Corporation certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Nils Knauer Title: Regulatory Compliance Manager Company Name: Sennheiser electronic GmbH & Co. KG Date: 8/25/2023

April 06, 2020 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Re: Product Certification Representative Authorization Letter We hereby authorize our Regulatory Compliance Manager Mr. Nils Knauer

(I/C No. L231X9L3G3) to sign on behalf of our company Sennheiser Electronic Corporation., in the following matters related to the Product Type Approval and Certification of our products to FCC:

Application forms and Report submittal Related correspondence Signing of all documents relating to the above matters and Any other lawful activity necessary to obtain such certification This authorization is limited to the product type approval, registration and certification matters only. This authorization is valid until further notice or rescinded in writing. If you have any questions regarding the authorization, please dont hesitate to contact the undersigned. Sincerely yours, Name: Michael Lieske Title: Director Operations - Americas Tel: 860-434-9190 e-mail: Michael.lieske@sennheiser.com

Sennheiser Electronic Corporation One Enterprise Drive Old Lyme, CT 06371 USA U.S. Agent for Service of Process Attestation Date: 2023-04-26 To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: Sennheiser Electronic Corp FRN: 0007220122 FCC ID: DMOSKMXSW Contact Name: Michael Lieske Address: 1 Enterprise Drive Old Lyme, Connecticut 06371 United States Telephone No: (860) 434-9190 154 Email: Michael.Lieske@sennheiser.com This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by 2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-

related proceeding involving the equipment. Applicant / U.S. Agent Signature:

Signed by (printed name):

Michael Lieske Director Operations Americas