FCC ID: P27OT4221 Dual Band ONT

GETTING TO KNOW YOU DEVICE SETTING UP THE CUSTOMER PREMISE EQUIPMENT-ONT Package contents Customer Premise Equipment-ONT AOT-4221SR unit 12V2A power supply Quick Installation Guide RJ45 Ethernet cable RJ11 Telephone cable Fiber cable Device outlook LED indicatorsLED White Solid White Dim Green Blinking Pink Blinking Red Solid Status Internet up with active connection Internet up with no active connection User connecting to Router Starting WPS function Internet Down Check the device and note the Wii SSID/password information from the label on the back of unit. Position the Customer Premise Equipment-ONT on a desktop. Make sure you leave enough space around the unit for ventilation and access to the cables. Ensure the connectivity as shown in the picture below. After power up, the System LED lights up as Amber color. CONFIGURING THE DEVICE Connect the device to your computer. On the computer, launch the web browser (e.g. Internet Explorer) and enter the following IP address in the URL bar:

https://192.168.225.1 admin admin When prompted, enter the default Username (

press Login to access to

) and Password (

) and TECHNICAL SPECIFICATION Environmental Conditions Temperature: -5C to 45C Humidity: 5% to 95%

DECLARATION OF CONFORMITY This product must not be disposed of as normal household waste, in accordance with the EU directive for waste electrical and electronic equipment (WEEE2 - 2012/19/EU). Instead, it should be disposed of by returning it to the point of sale, or to a designated recycling collection point. The product does not contain any Hazardous substances as listed in 2011/65/EU+(EU)2015/863 RoHS Directive. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modiications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Quick start Guide FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. z This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The device for operation in the band 5150-5250 MH is only for indoor use. 24 5 5 957DFV00AD

Product Description: Dual Band ONT Input:12V=2A FCC ID: P270T4221 S/N: XXXXXXXXOOOOOOXK MAC: XXXX0X0HXXX, ec @ FEE

Made in China id zg 2 s 3 s 2 s

zg so 40 50 60 20 eo 100:

80 70 50 60 au ov 0S o9 4 04 of 09 ov Og 09 06 OOF o 04 0 08 OF YD}! OF OF Or OG 09 OL 08 v8 QOZ Oo oe ov OS o9 o o@ 06 ODS or oz o ov OS o9 0%

Oo

FCC, Request for non-disclosure RF_501, Issue 7 Date: 19-Oct-10 Page 1 of 1 Company Name: Sercomm Corporation Address:

City:

Country:

8F, No. 3-1, YuanQu St, NanKang Taipei Taiwan To:

Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: P27OT4221 Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification:

Planned Release Date STC:

(notes 2, 3, 4, 5). If no date is given, 45 days from grant date will be used. Date: 2023/01/05 Name and signature of applicant: Nick Wu Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: P27OT4221

(1) DFS Device --

Master, Client without radar detection capability, Client with Radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode, access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) 2412 2462 MHz 2422 2452 MHz 5745 5825 MHz 5755 5795 MHz 5180 5240 MHz 5190 5230 MHz 5260 5320 MHz 5270 5310 MHz 5500 5700 MHz 5510 5670 MHz Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No passive scanning

(where the device is can listen only with no probes) Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Ad Hoc Mode capability Access point capability Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No

(3) Country code selection ability -

If no, pls explain how was implemented : Country is selcected as US by default and user can not change the country code. Yes , No

(4) Meet 15.202 requirement -

pls check below :

Yes , No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) By Software control. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory :

Printed Name: Nick Wu Position: Associate Manager

RF_160, Issue 04 Declaration of Authorization Sercomm Corporation 8F, No. 3-1, YuanQu St, NanKang Taipei Taiwan We Name:

Address:

City:

Country:

Declare that:

Name Representative of agent:

Agent Company name:

Address:

City:

Country Chenz Ker MRT Technology (Taiwan) Co., Ltd No. 38, Fuxing Second Rd., Guishan Dist., Taoyuan Taiwan is authorized to apply for Certification of the following product(s):

Product description: Dual Band ONT FCC ID: P27OT4221 Type designation:

AOT-4221SR Trademark:

Validity/ expiry date 2023/2/30 Airtel on our behalf. Date:

City:

2023/01/05 Taipei Name:

Nick Wu Function:

Associate Manager Signature:

WiFi Channels 12 & 13 Declaration Letter Date: 2023/01/05 To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: P27OT4221 Our devices don't operate on Channels 12 and 13, when a master transmits on these channels. This information is programmed into the EEPROM and is not accessible and cannot be changed by the end user. Dated this 2023/01/05 By:

Signature Title: Associate Manager On behalf of :

Sercomm Corporation Nick Wu Printed