| all | frequencies |
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|
| manual | photos | label | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User manual | Users Manual | 206.68 KiB | October 02 2011 | |||
| 1 |
|
Internal photos | Internal Photos | 1.35 MiB | October 02 2011 | |||
| 1 |
|
External photos | External Photos | 290.17 KiB | October 02 2011 | |||
| 1 |
|
Label format and location | ID Label/Location Info | 72.86 KiB | October 02 2011 | |||
| 1 |
|
Agent authorization | Cover Letter(s) | 367.88 KiB | October 02 2011 | |||
| 1 | Antenna specification | Operational Description | February 10 2011 | confidential | ||||
| 1 | Block diagram | Block Diagram | February 10 2011 | confidential | ||||
| 1 | Operational description | Operational Description | February 10 2011 | confidential | ||||
| 1 |
|
Request for confidentiality | Cover Letter(s) | 382.37 KiB | October 02 2011 | |||
| 1 | Schematics | Schematics | February 10 2011 | confidential | ||||
| 1 |
|
Test report | Test Report | 1.58 MiB | October 02 2011 | |||
| 1 |
|
Test setup photos | Test Setup Photos | 454.32 KiB | October 02 2011 |
| 1 | User manual | Users Manual | 206.68 KiB | October 02 2011 |
Home Security Camera OC825 User Guide Table of Contents CHAPTER 1 INTRODUCTION ............................................................................................. 1 Package Contents .............................................................................................................. 1 Features.............................................................................................................................. 1 LEDs................................................................................................................................... 2 CHAPTER 2 INITIAL INSTALLATION.............................................................................. 4 Requirements..................................................................................................................... 4 Procedure ........................................................................................................................... 4 CHAPTER 3 SPECIFICATIONS ........................................................................................... 6 Specifications ..................................................................................................................... 6 Customized RJ45 & Power Supply.................................................................................. 6 Day/Night Mode................................................................................................................. 7 Regulatory Approvals....................................................................................................... 8 Copyright 2011. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. i Chapter 1 Introduction 1 This Chapter provides an overview of the iCamera's features and capabilities. Congratulations on the purchase of your new iCamera. The iCamera is a Day and Night Net-
work Camera with VGA resolution and 802.11n WiFi connectivity. Package Contents The following items should be included:
The iCamera Unit Bracket * 1 Y-Cable * 1 with boot Adapter * 1 If any of the above items are damaged or missing, please contact your dealer immediately. Features DDR2 128MB with16MB Flash One Ethernet port with RJ45 connector Dual Omni Vision OV7740 1/5 CMOS Sensor Front Panel LEDs Reset/ WPS button Built-in Microphone Daylight Sensor Internal antenna for WiFi 1 LEDs Front-mounted LEDs The iCamera has 3 LEDs. On (Green)- Power On Off - Power Off Blinking - Data is being transmitted or received. Blinking Low - Weak strength of WiFi signal (1/2 Hz, SNR < 15 dB) Blinking Medium - Strength of WiFi signal is normal (1/2 Hz, SNR < 15 dB) Blinking High - Good strength of WiFi signal (1/2 Hz, SNR < 15 dB) On (Green)- LAN/Wireless connection established. Off - No active connection on the corresponding LAN port, or not associated to Wireless AP Flashing - Data is being transmitted or received. On - When the WPS function is failed, the WPS LED will be lit on for 5 seconds. Off - WPS function is off. Flashing - WPS function is being processed. If it is successful, the WPS LED will be off. POWER/WiFi
(Green) Network
(Green) WPS (Green) 2 Rear Panel LAN Port Reset Microphone Use standard LAN cable (RJ45 connectors) to connect your PC to the port. PoE (Power over Ethernet) function is supported. This button has two (2) functions:
Reboot. When pressed and released, the iCamera will reboot
(restart). Clear All Data. This button can also be used to clear ALL data and restore ALL settings to the factory default values. To Clear All Data and restore the factory default values:
1. Power On. 2. Keep holding the Reset Button down for 8 seconds. Release the Reset Button. The iCamera is now using the factory default values. The built-in microphone is useful for bi-direction voice conversation. 3 Chapter 2 Initial Installation 2 This Chapter covers the software installation of the iCamera. Requirements Network cable. Use standard 10/100BaseT network (UTP) cable with RJ45 connector. Procedure 1. Choose an Installation Site Select a suitable place to install the iCamera. 2. Disassemble the Mount kit Disassemble the mount kit in order to connect the LAN cable. 1. Take out the wall-mount kit from package box. 2. Remove Knob. 3. Use a screwdriver to loosen the screw in order to remove the top cover. 3. Connect LAN Cable 1. Connect LAN cable through the hole. 2. Lock the front cover into wall-mount kit. 3. Put the Knob back. 4. Use LAN cable to connect the device to the Ethernet port on the iCamera. Note! For the first installation, the user needs to ask the professionals assistance to connect the iCamera and iHub-3001B via the Y-cable (with Ethernet). After the 1st installation is completed, the user will use the Y-cable (without Ethernet) only. 4 Initial Installation 4. Power Up Connect the supplied power adapter to the iCamera. Use only the power adapter provided. Using a different one may cause hardware damage. 5. Check the LEDs The POWER LED should be ON. The Network LED should be ON (provided the PC is also ON.) 5 Chapter 3 Specifications 3 This Chapter provides specifications for the iCamera. Specifications Model iCamera Dimensions Operating Temperature Outdoor: -20 C to 45 C 72mm (W) x 72mm (H) x 20mm (D) (without bracket) Indoor: 0 C to 45 C Video compression H.264, MPEG4 and MJPEG Network Interface 1 Ethernet 10/100BaseT (RJ45) Storage Temperature
-20 C to 60 C LEDs Power Adapter 3 12V/1A Customized RJ45 & Power Supply RJ45 pin definition pin 1-> TXD+
pin 2-> TXD pin3-> RXD+
pin 4-> GND pin 5-> GND pin 6-> RXD pin7-> 12V pin 8-> 12V 6 Day/Night Mode Night mode SerComm P/N# 61930010LA Vendor P/N# 9347A3B, Day mode SerComm P/N# 61930020LA Vendor P/N# 9347A1B 7 Regulatory Approvals FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CE Approval CE Marking Warning This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 8 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 9
| 1 | Internal photos | Internal Photos | 1.35 MiB | October 02 2011 |
INTERNAL PHOTOGRAPHS OF EUT Report No: T110117202 Page 4 Rev.00 Report No: T110117202 Page 5 Rev.00 Report No: T110117202 Page 6 Rev.00 Report No: T110117202 Page 7 Rev.00 Report No: T110117202 Page 8 Rev.00 Report No: T110117202 Page 9 Rev.00 Report No: T110117202 Antenna Location Antenna Page 10 Rev.00 Report No: T110117202 Page 11 Rev.00 Report No: T110117202 Page 12 Rev.00
| 1 | External photos | External Photos | 290.17 KiB | October 02 2011 |
EXTERNAL PHOTOGRAPHS OF EUT Report No: T110117202 Page 1 / 12 Rev.00 Report No: T110117202 Page 2 Rev.00 Report No: T110117202 Page 3 Rev.00
| 1 | Label format and location | ID Label/Location Info | 72.86 KiB | October 02 2011 |
a Model Name:
Serial No:
Server Name:
4 Input: 12VDC === 1A Wireless Module Inside FCC ID: P270C825 ROMS Vaden tan ft complne wth Pa 18 fh FCC Rule Operon is jc oth flonrg wo
= (1) Ths device may not cause harm itrfcence, and (2) this device must accept any irene resnedneuang Msrtarenca it nay cate undested operon
| 1 | Agent authorization | Cover Letter(s) | 367.88 KiB | October 02 2011 |
SerComm Corporation Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3966 Chu Nan Office: 3F, No. 81, YuYi Rd., Chu-Nan, Miao-Li 350, Taiwan, R.O.C. TEL: 886-37-585-899 FAX: 886-37-585-000 Date:January 17, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern:
I, the undersigned, hereby authorize Mr. Rax Lai / Section Manager of Compliance Certification Services Inc. and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Mr. Rax Lai / Section Manager of Compliance Certification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to:
a) comply with the relevant provisions of the certification program;
b) c) d) e) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
make claims regarding certification only in respect of the scope for which certification has been granted;
do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
SerComm Corporation Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3966 Chu Nan Office: 3F, No. 81, YuYi Rd., Chu-Nan, Miao-Li 350, Taiwan, R.O.C. TEL: 886-37-585-899 FAX: 886-37-585-000 use certification only to indicate the products are certified as being in conformity with specified standards;
endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;
ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;
keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;
take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;
f) g) h) i) j) k) document the actions taken. This authorization is valid until further written notice from the applicant. Yours sincerely, ___________________________ Ronnie Cheng Associate Manager / R&D Division SerComm Corporation TEL: 886-2-2655-3988 #2547 FAX: 886-2-2655-7379 E-Mail: ronnie_cheng@sercomm.com
| 1 | Request for confidentiality | Cover Letter(s) | 382.37 KiB | October 02 2011 |
SerComm Corporation Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3966 Chu Nan Office: 3F, No. 81, YuYi Rd., Chu-Nan, Miao-Li 350, Taiwan, R.O.C. TEL: 886-37-585-899 FAX: 886-37-585-000 Date:January 17, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID : P27OC825 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:
1. Schematics 2. Operational Description 3. Block diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Yours sincerely, ___________________________ Ronnie Cheng Associate Manager / R&D Division SerComm Corporation TEL: 886-2-2655-3988 #2547 FAX: 886-2-2655-7379 E-Mail: ronnie_cheng@sercomm.com
| 1 | Test report | Test Report | 1.58 MiB | October 02 2011 |
Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Home Security Camera Model: OC825 Trade Name: SerComm Issued to 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. SerComm Corporation Issued by Compliance Certification Services Inc. No.81-1, Lane 210, Bade 2nd Rd., Lujhu Township, Taoyuan County 33841,Taiwan, R.O.C. TEL: 886-3-324-0332 FAX: 886-3-324-5235 http://www.ccsrf.com service@ccsrf.com Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NIST or any government agencies. The test results in the report only apply to the tested sample. Page 1 / 91 Rev.00 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Issue Date Jan. 25, 2011 Revision History Revisions Effect Page Revised By Initial Issue ALL Kosame Lin This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 2 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ..............................................................................4 2. EUT DESCRIPTION...................................................................................................5 3. TEST METHODOLOGY.............................................................................................6 3.1 EUT CONFIGURATION ........................................................................................6 3.2 EUT EXERCISE ....................................................................................................6 3.3 GENERAL TEST PROCEDURES.........................................................................6 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS.............................7 3.5 DESCRIPTION OF TEST MODES........................................................................8 4. INSTRUMENT CALIBRATION ..................................................................................9 4.1 MEASURING INSTRUMENT CALIBRATION .......................................................9 4.2 MEASUREMENT EQUIPMENT USED .................................................................9 4.3 MEASUREMENT UNCERTAINTY ......................................................................10 5. FACILITIES AND ACCREDITATIONS....................................................................11 5.1 FACILTIES ..........................................................................................................11 5.2 EQUIPMENT.......................................................................................................11 5.3 TABLE OF ACCREDITATIONS AND LISTINGS.................................................12 6. SETUP OF EQUIPMENT UNDER TEST .................................................................13 6.1 SETUP CONFIGURATION OF EUT ...................................................................13 6.2 SUPPORT EQUIPMENT.....................................................................................13 7. FCC PART 15.247 REQUIREMENTS .....................................................................14 7.1 6DB BANDWIDTH ...............................................................................................14 7.2 PEAK POWER ....................................................................................................25 7.3 AVERAGE POWER ............................................................................................27 7.4 BAND EDGES MEASUREMENT ........................................................................29 7.5 PEAK POWER SPECTRAL DENSITY................................................................46 7.6 SPURIOUS EMISSIONS.....................................................................................60 7.7 POWERLINE CONDUCTED EMISSIONS ..........................................................83 8. APPENDIX I RADIO FREQUENCY EXPOSURE ....................................................86 9. APPENDIX II PHOTOGRAPHS OF TEST SETUP..................................................88 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 3 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 1. TEST RESULT CERTIFICATION Applicant:
Manufacturer:
SerComm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. SerComm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Equipment Under Test: Home Security Camera Trade Name:
Model:
Date of Test:
SerComm OC825 January 17 ~ 22, 2011 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that:
The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. Approved by:
Stan Lin Supervisor Reviewed by:
Chieh Cheng Engineer This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 4 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 2. EUT DESCRIPTION Product Home Security Camera Trade Name Model Number Model Discrepancy EUT Power Rating Power Adapter SerComm OC825 N/A 12VDC, 1A Sunny Operating Frequency Range 2412 ~ 2462 MHz Model SYS1381-1212-W2 Transmit Power Modulation Technique Number of Channels Antenna Specification Remark:
IEEE 802.11b mode: 17.64 dBm (58.076mW) IEEE 802.11g mode: 24.67 dBm (293.089mW) draft 802.11n 20 MHz Channel mode: 26.81 dBm (479.733mW) draft 802.11n 40 MHz Channel mode: 25.54 dBm (358.096mW) IEEE 802.11b mode: DSSS (1, 2, 5.5 and 11 Mpbs) IEEE 802.11g mode: OFDM (6, 9, 12, 18, 24, 36, 48 and 54 Mpbs) draft 802.11n 20 MHz Channel mode: OFDM (6.5, 7.2, 13, 14.4, 14.44, 19.5, 21.7, 26, 28.89, 28.9, 39, 43.3, 43.33 52, 57.78, 57.8, 58.5, 65.0, 72.2, 78, 86.67, 104, 115.56, 117, 130, 144.44 Mbps) draft 802.11n 40 MHz Channel mode: OFDM (13.5, 15, 27, 30, 40.5, 45, 54, 60, 81, 90, 108, 120, 121.5, 135, 150, 162, 180, 216, 240, 243, 270, 300 Mbps) IEEE 802.11b/g mode: 11 Channels draft 802.11n 20 MHz Channel mode: 11 Channels draft 802.11n 40 MHz Channel mode: 7 Channels PIFA Antenna / Gain: 3.40dBi 1. The sample selected for test was production product and was provided by manufacturer. 2. This submittal(s) (test report) is intended for FCC ID: P27OC825 filing to comply with Section 15.207, 15.209 and 15.247 of the FCC Part 15, Subpart C Rules. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 5 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 3. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.4:
2003 and FCC CFR 47 Part 2, Part 15.207, 15.209 and 15.247. 3.1 EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2 EUT EXERCISE The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.207, 15.209 and 15.247 under the FCC Rules Part 15 Subpart C. 3.3 GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in Section 13.1.4.1 of ANSI C63.4: 2003 Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-peak and average detector modes. Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the maximum emissions, exploratory radiated emission measurements were made according to the requirements in Section 13.1.4.1 of ANSI C63.4: 2003. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 6 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS
(a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below:
MHz MHz 0.090 - 0.110 10.495 - 0.505 2.1735 - 2.1905 4.125 - 4.128 4.17725 - 4.17775 4.20725 - 4.20775 6.215 - 6.218 6.26775 - 6.26825 6.31175 - 6.31225 8.291 - 8.294 8.362 - 8.366 8.37625 - 8.38675 8.41425 - 8.41475 12.29 - 12.293 12.51975 - 12.52025 12.57675 - 12.57725 13.36 - 13.41 16.42 - 16.423 16.69475 - 16.69525 16.80425 - 16.80475 25.5 - 25.67 37.5 - 38.25 73 - 74.6 74.8 - 75.2 108 - 121.94 123 - 138 149.9 - 150.05 156.52475 -
156.52525 156.7 - 156.9 162.0125 - 167.17 167.72 - 173.2 240 - 285 322 - 335.4 MHz 399.9 - 410 608 - 614 960 - 1240 1300 - 1427 1435 - 1626.5 1645.5 - 1646.5 1660 - 1710 1718.8 - 1722.2 2200 - 2300 2310 - 2390 2483.5 - 2500 2655 - 2900 3260 - 3267 3332 - 3339 3345.8 - 3358 3600 - 4400 GHz 4.5 - 5.15 5.35 - 5.46 7.25 - 7.75 8.025 - 8.5 9.0 - 9.2 9.3 - 9.5 10.6 - 12.7 13.25 - 13.4 14.47 - 14.5 15.35 - 16.2 17.7 - 21.4 22.01 - 23.12 23.6 - 24.0 31.2 - 31.8 36.43 - 36.5
(2) 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6
(b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 7 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 3.5 DESCRIPTION OF TEST MODES The EUT is a 2Tx2R MIMO transmitter. Software used to control the EUT for staying in continuous transmitting mode was programmed. The worst case data rate is determined as the data rate with highest output power. After verification, all tests were carried out with the worst case test modes as shown below except radiated spurious emission below 1GHz, which worst case was in normal link mode only. IEEE 802.11b mode:
Channel Low (2412MHz), Channel Mid (2437MHz) and Channel High (2462MHz) with 1Mbps data rate was chosen for full testing. IEEE 802.11g mode:
Channel Low (2412MHz), Channel Mid (2437MHz) and Channel High (2462MHz) with 6Mbps data rate was chosen for full testing. draft 802.11n 20 MHz Channel mode:
Channel Low (2412MHz), Channel Mid (2437MHz) and Channel High (2462MHz) with 13.5Mbps data rate were chosen for full testing. draft 802.11n 40 MHz Channel mode:
Channel Low (2422MHz), Channel Mid (2437MHz) and Channel High (2452MHz) with 13.5Mbps data rate were chosen for full testing. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 8 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 4. INSTRUMENT CALIBRATION 4.1 MEASURING INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment, which is traceable to recognized national standards. 4.2 MEASUREMENT EQUIPMENT USED Equipment Used for Emissions Measurement Remark: Each piece of equipment is scheduled for calibration once a year. Conducted Emissions Test Site Name of Equipment Manufacturer Spectrum Analyzer Spectrum Analyzer Agilent R&S Anritsu Power meter Model E4446A FSEB MA2411B Serial Number Calibration Due MY48250064 825829/011 12/29/2011 12/12/2011 08/24/2011 917221 3M Semi Anechoic Chamber Name of Equipment Manufacturer Spectrum Analyzer Agilent Pre-Amplifier Pre-Amplifier HP HP Model E4446A 8447D 8449B EMI Test Receiver SCHAFFNER SCR 3501 Serial Number Calibration Due MY48250064 2944A06530 3008A01738 12/29/2011 01/02/2012 04/17/2011 01/26/2011 06/11/2013 10/07/2011 05/09/2011 N.C.R N.C.R N.C.R 436 2356 3084 00022250 N/A N/A N/A Loop Antenna Bilog Antenna Horn Antenna Turn Table Antenna Tower Controller Test S/W EMCO 6502 SCHWAZBECK VULB9160 EMCO CCS CCS CCS 3115 CC-T-1F CC-A-1F CC-C-1F LabVIEW 6.1 (Wugu Chamber EMI Teat V1_4.5.3) Powerline Conducted Emissions Test Site R&S R&S FCC Model ESCS30 ENV216 FCC-LISN-50/
250-16-2-07 Serial Number Calibration Due 845552/030 100069 06013 05/27/2011 6/19/2011 11/21/2011 EZ-EMC Name of Equipment Manufacturer EMI Test Receiver LISN LISN Test S/W This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 9 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 4.3 MEASUREMENT UNCERTAINTY Parameter Powerline Conducted Emission 3M Semi Anechoic Chamber / 30MHz ~ 1GHz 3M Semi Anechoic Chamber / Above 1GHz Uncertainty 2.0878 3.8856 3.8721 Remark: This uncertainty represents an expanded uncertainty expressed at approximately the 95%
confidence level using a coverage factor of k=2. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 10 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 5. FACILITIES AND ACCREDITATIONS 5.1 FACILTIES All measurement facilities used to collect the measurement data are located at No.199, Chunghsen Road, Hsintien City, Taipei Hsien, Taiwan, R.O.C. Tel: 886-2-2217-0894 / Fax: 886-2-2217-1029 No.11, Wugong 6th Rd., Wugu Industrial Park, Taipei Hsien 248, Taiwan Tel: 886-2-2299-9720 / Fax: 886-2-2298-4045 No. 81-1, Lane 210, Pa-De 2nd Rd., Luchu Hsiang, Taoyuan Shien, (338) Taiwan, R.O.C. Tel: 886-3-324-0332 / Fax: 886-3-324-5235 The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4: 2003 and CISPR Publication 22. 5.2 EQUIPMENT Radiated emissions are measured with one or more of the following types of linearly polarized antennas: tuned dipole, biconical, log periodic, bi-log, and/or ridged waveguide, horn. Spectrum analyzers with pre-selectors and quasi-peak detectors are used to perform radiated measurements. Conducted emissions are measured with Line Impedance Stabilization Networks and EMI Test Receivers. Calibrated wideband preamplifiers, coaxial cables, and coaxial attenuators are also used for making measurements. All receiving equipment conforms to CISPR Publication 16-1, Radio Interference Measuring Apparatus and Measurement Methods. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 11 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 5.3 TABLE OF ACCREDITATIONS AND LISTINGS Country Agency Scope of Accreditation Logo USA A2LA CFR 47, FCC Part15/18, CISPR 22, EN 55022, ICES-003, AS/NZS CISPR 22, VCCI V-3, EN 55011, CISPR 11, IEC/EN 61000-4-2/3/4/5/6/8/11, EN 61000-6-1/2/3/4, EN 55024, CISPR 24, AS/NZS CISPR 24, AS/NZS 61000.6.2, EN 55014-1/-2, ETSI EN 300 386 v1.3.2/v1.3.3, IEC/EN 61000-3-2, AS/NZS 61000.3.2, IEC/EN 61000-3-3, AS/NZS 61000.3.3 USA FCC MRA 3/10 meter Open Area Test Sites to perform FCC Part 15/18 measurements TW1026 Japan VCCI 3/10 meter Open Area Test Sites and conducted test sites to perform radiated/conducted measurements R-2882/2541/2798/725/1868 C-402/747/912 T-1930/1646 Taiwan TAF EN 55014-1, CISPR 14, CNS 13781-1, EN 55013, CISPR 13, CNS 13439, EN 55011, CISPR 11, CNS 13803, PLMN09, IS2045-0, LP0002 FCC Part 27/90, Part 15B/C/D/E, RSS-192/193/210/310 ETSI EN 300 328/ 300 220-1/ 300 220-2/ 301 893/ 301 489-01/ 301 489-03/ 301 489-07 /
301 489-17/ 300 440-1/ 300 440-2 AS/NZS 4268, AS/NZS 4771 CISPR 22, EN 55022, CNS 13438, AS/NZS CISPR 22, VCCI, IEC/EN 61000-4-2/3/4/5/6/8/11, CNS 14676-2/3/4/5/6/8, CNS 14934-2/3, CNS 13783-1, CNS 13439, CNS 13803 Taiwan BSMI CNS 13438, CNS 13783-1, CNS 13439, CNS 14115 Canada Industry Canada RSS212, Issue 1 SL2-IS-E-0014 / IN-E-0014
/A1-E-0014 /R1-E-0014
/R2-E-0014 /L1-E-0014 IC 2324C-3 IC 2324C-5 Note: No part of this report may be used to claim or imply product endorsement by A2LA, TAF or other government agency. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 12 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 6. SETUP OF EQUIPMENT UNDER TEST 6.1 SETUP CONFIGURATION OF EUT See test photographs attached in Appendix 1 for the actual connections between EUT and support equipment. 6.2 SUPPORT EQUIPMENT No. Device Type Brand Data Cable Series No. Power Cord FCC ID Model N/A
**No any support equipment during the test. Remark: Grounding was established in accordance with the manufacturers requirements and conditions for the intended use. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 13 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 7. FCC PART 15.247 REQUIREMENTS 7.1 6dB BANDWIDTH LIMIT According to 15.247(a)(2), systems using digital modulation techniques may operate in the 902 - 928 MHz, 2400 - 2483.5 MHz, and 5725 - 5850 MHz bands. The minimum 6 dB bandwidth shall be at least 500 kHz. TEST CONFIGURATION EUT Spectrum Analyzer TEST PROCEDURE 1. Place the EUT on the table and set it in the transmitting mode. 2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 3. Set the spectrum analyzer as RBW = 100kHz, VBW = 300kHz, Span = 30MHz, Sweep = auto. 4. Mark the peak frequency and 6dB (upper and lower) frequency. 5. Repeat until all the rest channels are investigated. TEST RESULTS No non-compliance noted This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 14 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 TEST DATA Test mode: IEEE 802.11b mode Channel Low Mid High Frequency
(MHz) Bandwidth (MHz) 2412 2437 2462 12.132 12.138 12.138 Test mode: IEEE 802.11g mode Channel Low Mid High Frequency
(MHz) Bandwidth (MHz) 2412 2437 2462 16.503 16.437 16.503 Limit
(kHz)
>500 Limit
(kHz)
>500 Test mode: draft 802.11n 20 MHz Channel mode Test mode: draft 802.11n 40 MHz Channel mode Channel Frequency
(MHz) Low Mid High 2412 2437 2462 Channel Frequency
(MHz) Low Mid High 2422 2437 2452 Bandwidth (MHz) Chain 0 17.230 17.285 17.339 Chain 1 17.675 17.627 17.651 Bandwidth (MHz) Chain 0 36.012 36.112 36.202 Chain 1 36.513 36.503 36.202 Result PASS PASS PASS Result PASS PASS PASS Limit
(kHz)
>500 Limit
(kHz)
>500 Result PASS PASS PASS Result PASS PASS PASS This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 15 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Test Plot IEEE 802.11b mode 6dB Bandwidth (CH Low) 6dB Bandwidth (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 16 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 6dB Bandwidth (CH High) IEEE 802.11g mode 6dB Bandwidth (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 17 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 6dB Bandwidth (CH Mid) 6dB Bandwidth (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 18 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 draft 802.11n 20 MHz Channel mode / Chain 0 6dB Bandwidth (CH Low) 6dB Bandwidth (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 19 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 6dB Bandwidth (CH High) draft 802.11n 20 MHz Channel mode / Chain 1 6dB Bandwidth (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 20 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 6dB Bandwidth (CH Mid) 6dB Bandwidth (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 21 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 draft 802.11n 40 MHz Channel mode / Chain 0 6dB Bandwidth (CH Low) 6dB Bandwidth (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 22 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 6dB Bandwidth (CH High) draft 802.11n 40 MHz Channel mode / Chain 1 6dB Bandwidth (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 23 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 6dB Bandwidth (CH Mid) 6dB Bandwidth (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 24 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 7.2 PEAK POWER LIMIT The maximum peak output power of the intentional radiator shall not exceed the following:
1. According to 15.247(b)(3), for systems using digital modulation in the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz: 1 Watt. 2. According to 15.247(b)(4), the conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs
(b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. TEST CONFIGURATION EUT Power Meter TEST PROCEDURE The transmitter output is connected to the Power Meter. The Power Meter is set to the peak power detection. TEST RESULTS No non-compliance noted This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 25 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 TEST DATA Test mode: IEEE 802.11b mode Channel Frequency Output Power
(MHz)
(dBm) Low Mid High 2412 2437 2462 17.64 17.53 17.03 Test mode: IEEE 802.11g mode Channel Frequency Output Power
(MHz)
(dBm) Low Mid High 2412 2437 2462 24.41 24.67 24.58 Output Power
(W) Limit
(W) 0.0581 0.0566 0.0505 1.00 Output Power
(W) Limit
(W) 0.2761 0.2931 0.2871 1.00 Result PASS PASS PASS Result PASS PASS PASS Test mode: draft 802.11n 20 MHz Channel mode Channel Frequency
(MHz) Output Power
(dBm) Output Power
(W) Chain 0 Chain 1 Combination Chain 0 Chain 1 Combination Limit
(W) Result Low Mid High 2412 2437 2462 24.72 22.62 23.81 22.66 22.02 22.31 26.81 26.28 25.18 0.2965 0.1828 0.2404 0.1845 0.1592 0.1702 0.4793 0.4249 0.3294 1.00 PASS PASS PASS Test mode: draft 802.11n 40 MHz Channel mode Channel Frequency
(MHz) Output Power
(dBm) Output Power
(W) Chain 0 Chain 1 Combination Chain 0 Chain 1 Combination Limit
(W) Result Low Mid High 2422 2437 2452 22.52 22.36 22.56 22.50 22.25 22.38 25.45 25.54 25.33 0.1786 0.1722 0.1803 0.1778 0.1679 0.1730 0.3508 0.3581 0.3409 1.00 PASS PASS PASS This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 26 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 7.3 AVERAGE POWER LIMIT None; for reporting purposes only. TEST CONFIGURATION EUT Power Meter TEST PROCEDURE The transmitter output is connected to the Power Meter. The Power Meter is set to the average power detection. TEST RESULTS No non-compliance noted This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 27 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 TEST DATA Test mode: IEEE 802.11b mode Channel Frequency Output Power
(MHz)
(dBm) Low Mid High 2412 2437 2462 15.19 15.26 14.76 Test mode: IEEE 802.11g mode Channel Frequency Output Power
(MHz)
(dBm) Low Mid High 2412 2437 2462 14.73 15.08 14.56 Output Power
(W) 0.0330 0.0336 0.0299 Output Power
(W) 0.0297 0.0322 0.0286 Test mode: draft 802.11n 20 MHz Channel mode Channel Frequency
(MHz) Low Mid High 2412 2437 2462 Chain 0 13.36 13.86 13.09 Output Power
(dBm) Chain 1 Combination Output Power
(W) Chain 0 Chain 1 Combination 15.91 16.68 16.12 17.83 18.51 17.87 0.0217 0.0243 0.0204 0.0390 0.0466 0.0409 0.0607 0.0709 0.0613 Test mode: draft 802.11n 40 MHz Channel mode Channel Frequency
(MHz) Low Mid High 2422 2437 2452 Chain 0 14.71 15.31 14.49 Output Power
(dBm) Chain 1 Combination 11.24 12.45 12.39 16.32 17.12 16.58 Output Power
(W) Chain 0 0.02958 0.03396 0.02812 Chain 1 Combination 0.01330 0.01758 0.01734 0.04288 0.05154 0.04546 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 28 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 7.4 BAND EDGES MEASUREMENT LIMIT According to 15.247(d), in any 100 kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see Section 15.205(c)). TEST CONFIGURATION Antenna tower EUT 3m 4m Turntable 0.8m 1m Horn antenna Spectrum analyzer Pre-amp TEST PROCEDURE 1. The EUT is placed on a turntable, which is 0.8m above the ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. out the highest emission. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find 4. Set the spectrum analyzer in the following setting in order to capture the lower and upper band-edges of the emission:
(a) PEAK: RBW=VBW=1MHz / Sweep=AUTO
(b) AVERAGE: RBW=1MHz / VBW=10Hz / Sweep=AUTO 5. Repeat the procedures until all the PEAK and AVERAGE versus POLARIZATION are measured. TEST RESULTS Refer to attach spectrum analyzer data chart. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 29 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Test Plot Band Edges (IEEE 802.11b mode / CH Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 30 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 31 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Band Edges (IEEE 802.11b mode / CH High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 32 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 33 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Band Edges (IEEE 802.11g mode / CH Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 34 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 35 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Band Edges (IEEE 802.11g mode / CH High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 36 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 37 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Band Edges (draft 802.11n 20 MHz Channel mode / CH Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 38 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 39 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Band Edges (draft 802.11n 20 MHz Channel mode / CH High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 40 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 41 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Band Edges (draft 802.11n 40 MHz Channel mode / CH Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 42 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 43 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Band Edges (draft 802.11n 40 MHz Channel mode / CH High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 44 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 45 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 7.5 PEAK POWER SPECTRAL DENSITY LIMIT 1. According to 15.247(e), for digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. 2. According to 15.247(f), the digital modulation operation of the hybrid system, with the frequency hopping turned off, shall comply with the power density requirements of paragraph (d) of this section. TEST CONFIGURATION EUT Spectrum Analyzer TEST PROCEDURE 1. Place the EUT on the table and set it in transmitting mode. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 2. Set the spectrum analyzer as RBW = 3kHz, VBW = 10kHz, Span = 300kHz, Sweep=100s 3. Record the max. reading. 4. Repeat the above procedure until the measurements for all frequencies are completed. TEST RESULTS No non-compliance noted This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 46 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 TEST DATA Test mode: IEEE 802.11b mode Channel Frequency
(MHz) Low Mid High 2412 2437 2462 PPSD
(dBm)
-17.16
-17.01
-17.14 Test mode: IEEE 802.11g mode Channel Frequency
(MHz) Low Mid High 2412 2437 2462 PPSD
(dBm)
-16.47
-16.15
-16.25 Limit
(dBm) 8.00 Limit
(dBm) 8.00 Result PASS PASS PASS Result PASS PASS PASS Test mode: draft 802.11n 20 MHz Channel mode Channel Frequency
(MHz) Low Mid High 2412 2437 2462 Chain 0
-16.16
-15.50
-15.52 PPSD
(dBm) Chain 1 Combination
-13.23
-12.02
-12.72
-9.55
-7.85
-8.93 Limit
(dBm) 8.00 Test mode: draft 802.11n 40 MHz Channel mode Channel Frequency
(MHz) Low Mid High 2422 2437 2452 Chain 0
-18.32
-16.61
-15.89 PPSD
(dBm) Chain 1 Combination
-15.15
-13.60
-15.07
-11.87
-10.04
-10.50 Limit
(dBm) 8.00 Result PASS PASS PASS Result PASS PASS PASS This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 47 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Test Plot IEEE 802.11b mode PPSD (CH Low) PPSD (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 48 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 PPSD (CH High) IEEE 802.11g mode PPSD (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 49 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 PPSD (CH Mid) PPSD (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 50 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 draft 802.11n 20 MHz Channel mode / Chain 0 PPSD (CH Low) PPSD (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 51 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 PPSD (CH High) draft 802.11n 20 MHz Channel mode / Chain 1 PPSD (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 52 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 PPSD (CH Mid) PPSD (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 53 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 draft 802.11n 20 MHz Channel mode / Combination PPSD (CH Low) PPSD (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 54 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 PPSD (CH High) draft 802.11n 40 MHz Channel mode / Chain 0 PPSD (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 55 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 PPSD (CH Mid) PPSD (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 56 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 draft 802.11n 40 MHz Channel mode / Chain 1 PPSD (CH Low) PPSD (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 57 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 PPSD (CH High) draft 802.11n 40 MHz Channel mode / Combination PPSD (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 58 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 PPSD (CH Mid) PPSD (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 59 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 7.6 SPURIOUS EMISSIONS 7.6.1 CONDUCTED MEASUREMENT LIMIT According to 15.247(d), in any 100 kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see Section 15.205(c)). TEST CONFIGURATION EUT Spectrum Analyzer TEST PROCEDURE Conducted RF measurements of the transmitter output were made to confirm that the EUT antenna port conducted emissions meet the specified limit and to identify any spurious signals that require further investigation or measurements on the radiated emissions site. The transmitter output is connected to the spectrum analyzer. The resolution bandwidth is set to 100 kHz. The video bandwidth is set to 100 kHz. Measurements are made over the 30MHz to 26GHz range with the transmitter set to the lowest, middle, and highest channels. TEST RESULTS No non-compliance noted. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 60 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Test Plot IEEE 802.11b mode This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 61 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 IEEE 802.11g mode This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 62 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 63 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 draft 802.11n 20 MHz Channel mode This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 64 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 draft 802.11n 40 MHz Channel mode This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 65 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 66 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 7.6.2 RADIATED EMISSIONS LIMIT 1. According to 15.209(a), except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table:
Frequency
(MHz) 30-88 88-216 216-960 Above 960 Field Strength
(V/m) 100*
150*
200*
500 Measurement Distance
(m) 3 3 3 3 Remark: Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. 2. In the emission table above, the tighter limit applies at the band edges. Frequency
(MHz) 30-88 88-216 216-960 Above 960 Field Strength
(V/m at 3-meter) 100 150 200 500 Field Strength
(dBV/m at 3-meter) 40 43.5 46 54 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 67 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 TEST CONFIGURATION Below 1 GHz EUT 3m 4m Turntable 0.8m 1m Reference ground plane Above 1 GHz EUT 3m 4m Turntable 0.8m 1m Antenna tower Bi-log antenna Spectrum analyzer Antenna tower Horn antenna Spectrum analyzer Pre-amp This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 68 Rev.00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 TEST PROCEDURE 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Set the spectrum analyzer in the following setting as:
Below 30MHz RBW=9kHz / VBW=300kHz / Sweep=AUTO 30 ~ 1000MHz:
RBW=120kHz / VBW=300kHz / Sweep=AUTO Above 1GHz:
(a) PEAK: RBW=VBW=1MHz / Sweep=AUTO
(b) AVERAGE: RBW=1MHz / VBW=10Hz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. TEST RESULTS No non-compliance noted. Page 69 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 TEST DATA Below 1GHz Operation Mode:
Temperature:
Humidity:
Frequency Ant. Pol.
(H/V)
(MHz) 44.4308 138.6400 152.2200 239.5200 431.5800 641.1000 827.3400 937.9200 39.7147 152.2200 239.5200 359.8000 709.0000 757.5000 868.0800 Remark:
V V V V V V V V H H H H H H H Transmitting 18C 60% RH Test Date:
Tested by:
Polarity:
Jan. 20, 2011 Chieh Cheng Ver. / Hor. Reading
(dBuV) 48.64 50.23 50.53 48.43 43.75 42.42 43.97 42.02 41.30 44.69 46.84 44.29 42.41 42.19 43.75 Correction Factor
(dB/m)
-13.43
-12.55
-12.68
-13.46
-8.72
-4.76
-1.13 1.20
-13.67
-12.68
-13.46
-9.63
-2.96
-2.15
-0.06 Result
(dBuV/m) Limit
(dBuV/m) 35.21 37.68 37.85 34.97 35.03 37.66 42.84 43.22 27.63 32.01 33.38 34.66 39.45 40.04 43.69 40.00 43.50 43.50 46.00 46.00 46.00 46.00 46.00 40.00 43.50 46.00 46.00 46.00 46.00 46.00 Margin
(dB)
-4.79
-5.82
-5.65
-11.03
-10.97
-8.34
-3.16
-2.78
-12.37
-11.49
-12.62
-11.34
-6.55
-5.96
-2.31 Remark QP QP QP QP QP QP QP QP QP QP QP QP QP QP QP 1. No emission found between lowest internal used / generated frequency to 30 MHz. (9kHz ~ 30MHz) 2. Measuring frequencies from 9 kHz to the 1GHz. 3. Radiated emissions measured in the measured frequency range were made with an instrument using peak detector or quasi-peak detector mode. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. The IF bandwidth of SPA between 30MHz to 1GHz was 100kHz. Page 70 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Above 1 GHz Operation Mode: TX / IEEE 802.11b / CH Low Temperature:
Humidity:
Frequency 12C 50 % RH Correction Ant. Pol. Reading
(Average)
(dBuV)
(MHz) 2350.00 2500.00 N/A
(H/V) V V 2113.33 2523.33 2960.00 4825.00 7241.67 N/A H H H H H Remark:
Reading
(Peak)
(dBuV) 50.70 50.49 50.17 51.32 49.37 43.79 39.48
---
---
---
---
---
---
---
Factor
(dB/m) 0.85 2.43 Result
(Peak)
(dBuV/m) 51.56 52.92
-1.64
-1.10 1.96 7.74 12.45 F 48.53 50.22 51.33 51.52 51.93 Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor. Result
(Average)
(dBuV/m)
---
---
---
---
---
---
---
Limit
(Peak)
(dBuV/m) 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 Margin
(dB)
-2.44
-1.08 Remark Peak Peak 74.00 74.00 74.00 74.00 74.00 54.00 54.00 54.00 54.00 54.00
-5.47
-3.78
-2.67
-2.48
-2.07 Peak Peak Peak Peak Peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 71 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / IEEE 802.11b / CH Mid Temperature:
Humidity:
Frequency 12C 50 % RH Correction Ant. Pol. Reading
(Average)
(dBuV)
(MHz) 1360.00 1830.00 2340.00 2583.33 N/A 1750.00 2293.33 2640.00 4875.00 N/A Remark:
(H/V) V V V V H H H H Reading
(Peak)
(dBuV) 50.99 50.34 51.22 50.16 50.99 51.10 51.13 43.69
---
---
---
---
---
---
---
---
Factor
(dB/m)
-4.85
-0.96 0.77 1.38 Result
(Peak)
(dBuV/m) 46.14 49.38 51.99 51.54
-4.03
-1.38
-0.06 7.74 46.97 49.72 51.06 51.43 Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor. Result
(Average)
(dBuV/m)
---
---
---
---
---
---
---
---
Limit
(Peak)
(dBuV/m) 74.00 74.00 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 54.00 Margin
(dB)
-7.86
-4.62
-2.01
-2.46 Remark Peak Peak Peak Peak 74.00 74.00 74.00 74.00 54.00 54.00 54.00 54.00
-7.03
-4.28
-2.94
-2.57 Peak Peak Peak Peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 72 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / IEEE 802.11b / CH High Temperature:
Humidity:
Frequency 12C 50 % RH Correction Ant. Pol. Reading
(Average)
(dBuV)
(MHz) 1816.67 2290.00 2653.33 4925.00 N/A 2376.67 2626.67 N/A Remark:
(H/V) V V V V H H Reading
(Peak)
(dBuV) 50.85 51.10 50.00 48.19 51.65 49.93
---
---
---
44.53
---
---
Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor. Result
(Average)
(dBuV/m)
---
---
---
51.91 Limit
(Peak)
(dBuV/m) 74.00 74.00 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 54.00 Margin
(dB) Remark
-4.12 Peak
-2.43 Peak
-2.65 Peak
-2.09 AVG Factor
(dB/m)
-0.97 0.47 1.35 7.38 Result
(Peak)
(dBuV/m) 49.88 51.57 51.35 55.57
-1.49 0.04 50.16 49.97
---
---
74.00 74.00 54.00 54.00
-3.84 Peak
-4.03 Peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 73 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / IEEE 802.11g / CH Low Temperature:
Humidity:
Frequency 12C 50 % RH Correction Ant. Pol. Factor
(dB/m) 0.09 0.94 2.01 Result
(Peak)
(dBuV/m) 50.01 52.94 54.91 Reading
(Peak)
(dBuV) 49.92 52.00 52.90 Reading
(Average)
(dBuV)
---
---
43.56
(H/V) V V V H H H H 55.25 49.99 57.24 41.53
---
---
45.33 29.91
-4.92
-1.94
-1.52 12.43
(MHz) 2176.67 2360.00 2463.33 N/A 1886.67 2160.00 2463.33 7233.33 N/A Remark:
Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor. Result
(Average)
(dBuV/m)
---
---
45.57 Limit
(Peak)
(dBuV/m) 74.00 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 Margin
(dB) Remark
-3.99 Peak
-1.06 Peak
-8.43 AVG
---
---
43.81 42.34 74.00 74.00 74.00 74.00 54.00 54.00 54.00 54.00
-3.67 Peak
-5.95 Peak
-10.19 AVG
-11.66 AVG 50.33 48.05 55.71 53.96 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 74 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / IEEE 802.11g / CH Mid Temperature:
Humidity:
Frequency 12C 50 % RH Correction Ant. Pol. Reading
(Average)
(dBuV)
(MHz) 1820.00 2383.33 2490.00 2760.00 N/A 1350.00 1890.00 2373.33 2490.00 N/A Remark:
(H/V) V V V V H H H H Reading
(Peak)
(dBuV) 49.32 53.27 53.37 49.02 54.94 53.68 54.50 55.06
---
44.34 42.22
---
---
---
46.98 44.57 Factor
(dB/m)
-0.97 1.14 2.32 1.29
-7.15
-4.95
-1.48
-1.51 Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor. Result
(Peak)
(dBuV/m) 48.35 54.41 55.68 50.31 47.79 48.73 53.02 53.55 Result
(Average)
(dBuV/m)
---
45.48 44.54
---
---
---
45.50 43.06 Limit
(Peak)
(dBuV/m) 74.00 74.00 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 54.00 Margin
(dB) Remark
-5.65 Peak AVG
-8.52
-9.46 AVG
-3.69 Peak 74.00 74.00 74.00 74.00 54.00 54.00 54.00 54.00
-6.21 Peak
-5.27 Peak
-8.50 AVG
-10.94 AVG 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 75 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / IEEE 802.11g / CH High Temperature:
Humidity:
Frequency 12C 50 % RH Correction Ant. Pol. Reading
(Average)
(dBuV)
(MHz) 2186.67 2410.00 2513.33 2666.67 N/A 2106.67 2410.00 2526.67 N/A Remark:
(H/V) V V V V H H H Reading
(Peak)
(dBuV) 49.38 52.84 52.34 49.68 49.54 54.15 54.41
---
43.21 41.56
---
---
---
47.83 Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor. Result
(Average)
(dBuV/m)
---
44.60 43.82
---
---
---
46.78 Limit
(Peak)
(dBuV/m) 74.00 74.00 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 54.00 Margin
(dB) Remark
-4.22 Peak
-9.40 AVG
-10.18 AVG
-2.92 Peak 74.00 74.00 74.00 54.00 54.00 54.00
-6.05 Peak
-1.39 Peak
-7.22 AVG Factor
(dB/m) 0.40 1.39 2.26 1.40 Result
(Peak)
(dBuV/m) 49.78 54.24 54.60 51.08
-1.59
-1.54
-1.05 47.95 52.61 53.37 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 76 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / draft 802.11n 20 MHz Channel mode Temperature:
Humidity:
Frequency
/ CH Low 12C 50 % RH Correction Ant. Pol. Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor.
(MHz) 1886.67 2360.00 2466.67 2586.67 N/A 2143.33 2360.00 2463.33 7241.67 N/A Remark:
(H/V) V V V V H H H H Reading
(Peak)
(dBuV) 49.92 55.07 53.31 50.14 50.73 55.41 54.82 44.11 Reading
(Average)
(dBuV)
---
41.69 42.37
---
---
43.65 44.32 30.50 Factor
(dB/m)
-0.92 0.94 2.05 1.34 Result
(Peak)
(dBuV/m) 49.00 56.01 55.35 51.48
-1.83
-1.45
-1.52 12.45 48.90 53.96 53.30 56.56 Result
(Average)
(dBuV/m)
---
42.63 44.42
---
---
42.20 42.80 42.95 Limit
(Peak)
(dBuV/m) 74.00 74.00 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 54.00 Remark Margin
(dB) Peak
-5.00
-11.37 AVG AVG
-9.58
-2.52 Peak 74.00 74.00 74.00 74.00 54.00 54.00 54.00 54.00
-5.10 Peak
-11.80 AVG
-11.20 AVG
-11.05 AVG 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 77 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / draft 802.11n 20 MHz Channel mode Temperature:
Humidity:
Frequency
/ CH Mid 12C 50 % RH Correction Ant. Pol. Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor.
(MHz) 1840.00 2213.33 2763.33 4875.00 N/A 1623.33 2383.33 2923.33 4875.00 7308.33 N/A Remark:
(H/V) V V V V H H H H H Reading
(Peak)
(dBuV) 50.25 50.78 49.65 39.30 52.49 55.66 48.26 42.15 44.49 Reading
(Average)
(dBuV)
---
---
---
---
---
44.11
---
---
31.41 Factor
(dB/m)
-0.95 0.75 1.28 7.30 Result
(Peak)
(dBuV/m) 49.30 51.53 50.93 46.60
-5.54
-1.50 1.48 7.74 12.48 46.96 54.15 49.75 49.89 56.98 Result
(Average)
(dBuV/m)
---
---
---
---
---
42.61
---
---
43.89 Limit
(Peak)
(dBuV/m) 74.00 74.00 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 54.00 Margin
(dB)
-4.70
-2.47
-3.07
-7.40 Remark Peak Peak Peak Peak 74.00 74.00 74.00 74.00 74.00 54.00 54.00 54.00 54.00 54.00
-7.04 Peak
-11.39 AVG Peak
-4.25
-4.11 Peak
-10.11 AVG 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 78 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / draft 802.11n 20 MHz Channel mode Temperature:
Humidity:
Frequency Correction Ant. Pol.
/ CH High 12C 50 % RH Reading
(Peak)
(dBuV) 50.72 51.42 50.55 40.52 56.72 54.48 57.11 41.57 44.96 Reading
(Average)
(dBuV)
---
---
---
---
---
---
43.69
---
32.94 Factor
(dB/m)
-0.92 0.75 1.55 7.38 Result
(Peak)
(dBuV/m) 49.80 52.17 52.10 47.91
-4.97
-1.53
-1.28 8.18 11.42 51.75 52.95 55.83 49.75 56.38 Result
(Average)
(dBuV/m)
---
---
---
---
---
---
42.41
---
44.36 Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Limit
(Peak) Ver. / Hor. Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 54.00 Margin
(dB) Remark
-4.20 Peak
-1.83 Peak
-1.90 Peak
-6.09 Peak
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 54.00 54.00 54.00 54.00 54.00
-2.25 Peak
-1.05 Peak
-11.59 AVG
-4.25 Peak
-9.64 AVG
(MHz) 1890.00 2213.33 2570.00 4925.00 N/A 1893.33 2393.33 2513.33 4925.00 7391.67 N/A Remark:
(H/V) V V V V H H H H H 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 79 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / draft 802.11n 40 MHz Channel mode Temperature:
Humidity:
Frequency
/ CH Low 12C 50 % RH Correction Ant. Pol. Reading
(Average)
(dBuV) Result
(Average)
(dBuV/m)
(MHz) 1890.00 2213.33 2316.67 2526.67 N/A 1350.00 1890.00 2316.67 N/A Remark:
(H/V) V V V V H H H Reading
(Peak)
(dBuV) 49.32 50.67 52.18 49.93 53.57 54.30 54.33
---
---
---
---
---
---
---
Factor
(dB/m)
-0.92 0.75 0.57 2.09 Result
(Peak)
(dBuV/m) 48.40 51.42 52.75 52.02
-7.15
-4.95
-1.36 46.42 49.35 52.98 Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor. Limit
(Peak)
(dBuV/m) 74.00 74.00 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 54.00 Margin
(dB) Remark
-5.60 Peak
-2.58 Peak
-1.25 Peak
-1.98 Peak 74.00 74.00 74.00 54.00 54.00 54.00
-7.58 Peak
-4.65 Peak
-1.02 Peak
---
---
---
---
---
---
---
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 80 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / draft 802.11n 40 MHz Channel mode Temperature:
Humidity:
Frequency
/ CH Mid 12C 50 % RH Correction Ant. Pol. Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor.
(MHz) 1626.67 1953.33 2333.33 2546.67 N/A 1620.00 2256.67 2333.33 2540.00 4875.00 7308.33 N/A Remark:
(H/V) V V V V H H H H H H Reading
(Peak)
(dBuV) 51.36 50.28 51.79 51.16 52.56 51.56 54.94 53.21 40.70 41.01 Reading
(Average)
(dBuV)
---
---
---
---
---
---
45.54
---
---
33.61 Factor
(dB/m)
-3.14
-1.86 0.71 1.84 Result
(Peak)
(dBuV/m) 48.22 48.42 52.50 53.00
-5.62
-1.70
-1.39
-0.81 7.74 12.48 46.94 49.86 53.54 52.40 48.44 53.50 Result
(Average)
(dBuV/m)
---
---
---
---
---
---
44.15
---
---
46.09 Limit
(Peak)
(dBuV/m) 74.00 74.00 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 54.00 Margin
(dB) Remark
-5.78 Peak
-5.58 Peak
-1.50 Peak
-1.00 Peak 74.00 74.00 74.00 74.00 74.00 74.00 54.00 54.00 54.00 54.00 54.00 54.00
-7.06 Peak
-4.14 Peak
-9.85 AVG
-1.60 Peak
-5.56 Peak AVG
-7.91 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 81 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Operation Mode: TX / draft 802.11n 40 MHz Channel mode Temperature:
Humidity:
Frequency
/ CH High 12C 50 % RH Correction Ant. Pol. Test Date:
Jan. 17, 2011 Tested by: Chieh Cheng Polarity:
Ver. / Hor.
(MHz) 1793.33 2350.00 2556.67 N/A 1350.00 2346.67 2553.33 2933.33 N/A Remark:
(H/V) V V V H H H H Reading
(Peak)
(dBuV) 50.66 52.16 51.64 54.37 53.01 53.68 49.21 Reading
(Average)
(dBuV)
---
45.87 46.25
---
---
46.28
---
Factor
(dB/m)
-1.09 0.85 1.72 Result
(Peak)
(dBuV/m) 49.57 53.01 53.35
-7.15
-1.42
-0.58 1.61 47.22 51.59 53.10 50.82 Result
(Average)
(dBuV/m)
---
46.72 47.97
---
---
45.70
---
Limit
(Peak)
(dBuV/m) 74.00 74.00 74.00 Limit
(Average)
(dBuV/m) 54.00 54.00 54.00 Margin
(dB) Remark
-4.43 Peak
-7.28 AVG AVG
-6.03 74.00 74.00 74.00 74.00 54.00 54.00 54.00 54.00
-6.78 Peak
-2.41 Peak
-8.30 AVG
-3.18 Peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit or as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 82 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 7.7 POWERLINE CONDUCTED EMISSIONS LIMIT According to 15.207(a), except as shown in paragraphs (b) and (c) of this section, for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table, as measured using a 50 H/50 ohms line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the boundary between the frequency ranges. Frequency Range
(MHz) 0.15 to 0.50 Limits
(dBV) Quasi-peak 66 to 56*
0.50 to 5 5 to 30 56 60
* Decreases with the logarithm of the frequency. TEST CONFIGURATION Average 56 to 46*
46 50 See test photographs attached in Appendix II for the actual connections between EUT and support equipment. TEST PROCEDURE 1. The EUT was placed on a table, which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. Repeat above procedures until all frequency measured were complete. TEST RESULTS The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement range. Significant peaks are then marked as shown on the following data page, and these signals are then quasi-peaked. Page 83 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 TEST DATA Operation Mode:
Temperature:
Humidity:
Charging 22C 55% RH Jan. 21, 2011 Test Date:
Tested by: Jin Liao Freq.
(MHz) QP Reading AV Reading Corr. factor QP Result AV Result QP Limit AV Limit QP Margin AV Margin Note 0.1695 0.2281 0.4117 0.4430 1.2437 2.3844 0.1969 0.3922 0.4273 0.5953 1.2437 1.9664 23.39 26.50 34.92 36.48 28.38 26.06 40.39 36.89 36.72 28.79 28.66 24.97 6.09 7.70 20.22 21.88 19.48 16.56 31.09 29.99 20.72 20.89 20.36 16.77 9.71 9.70 9.68 9.62 9.12 9.24 9.71 9.71 9.68 9.61 9.64 9.73 33.10 36.20 44.60 46.10 37.50 35.30 50.10 46.60 46.40 38.40 38.30 34.70 15.80 17.40 29.90 31.50 28.60 25.80 40.80 39.70 30.40 30.50 30.00 26.50 64.98 62.52 57.61 57.01 56.00 56.00 63.74 58.02 57.31 56.00 56.00 56.00 54.98 52.52 47.61 47.01 46.00 46.00 53.74 48.02 47.31 46.00 46.00 46.00
-31.88
-26.32
-13.01
-10.91
-18.50
-20.70
-13.64
-11.42
-10.91
-17.60
-17.70
-21.30
-39.18
-35.12
-17.71
-15.51
-17.40
-20.20
-12.94
-8.32
-16.91
-15.50
-16.00
-19.50 L1 L1 L1 L1 L1 L1 L2 L2 L2 L2 L2 L2 Remark:
1. The measuring frequencies range between 0.15 MHz and 30 MHz. 2. The emissions measured in the frequency range between 0.15 MHz and 30MHz were made with an instrument using Quasi-peak detector and Average detector. 3. The IF bandwidth of SPA between 0.15MHz and 30MHz was 10kHz. The IF bandwidth of Test Receiver between 0.15MHz and 30MHz was 9kHz. 4. L1 = Line One (Live Line) / L2 = Line Two (Neutral Line) Page 84 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Test Plot Conducted emissions (Line 1) Conducted emissions (Line 2) Page 85 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 8. APPENDIX I RADIO FREQUENCY EXPOSURE LIMIT According to 15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See 1.1307(b)(1) of this chapter. EUT Specification EUT Home Security Camera Frequency band
(Operating) Device category Exposure classification Antenna diversity Max. output power Antenna gain (Max) Evaluation applied WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others Portable (<20cm separation) Mobile (>20cm separation) Others Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure
(S=1mW/cm2) Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity IEEE 802.11b mode: 17.64 dBm (58.076mW) IEEE 802.11g mode: 24.67 dBm (293.089mW) draft 802.11n 20 MHz Channel mode: 26.81 dBm (479.733mW) draft 802.11n 40 MHz Channel mode: 25.54 dBm (358.096mW) 3.40dBi (including cable loss) (Numeric gain: 2.19) MPE Evaluation SAR Evaluation N/A Remark:
1. The maximum output power is 26.81dBm (479.733mW) at 2412MHz (with 2.19numeric antenna gain.) 2. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power density is 1.0 mW/cm2 even if the calculation indicates that the power density would be larger. TEST RESULTS No non-compliance noted. Page 86 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Calculation Given 2E 3770 30 GP d
=
&
S =
E Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields:
S
=
GP 30 d 3770 2 Changing to units of mW and cm, using:
Yields P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 S
=
(
P
/
30 1000
(
d 3770
) G
) 2 100
/
=
.0 0796 GP d 2 Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 Maximum Permissible Exposure EUT output power = 479.733mW Numeric Antenna gain = 2.19 Substituting the MPE safe distance using d = 20 cm into Equation 1:
Yields
.0 Where P = Power in mW
Power density = 0.209 mW / cm2
(For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm2 even if the calculation indicates that the power density would be larger.) G = Numeric antenna gain S = Power density in mW / cm2
= 000199 GP S Page 87 Rev. 00
| 1 | Test setup photos | Test Setup Photos | 454.32 KiB | October 02 2011 |
Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 9. APPENDIX II PHOTOGRAPHS OF TEST SETUP Radiated Emission Set up Photos Below 1GHz Page 88 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Above 1GHz Page 89 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Conducted Emission Setup Photos Page 90 Rev. 00 Compliance Certification Services Inc. Report No.: T110117202-RP1 FCC ID: P27OC825 Date of Issue: Jan. 25, 2011 Powerline Conducted Emissions Setup Photos Page 91 Rev. 00
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2011-02-10 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2011-02-10
|
||||
| 1 | Applicant's complete, legal business name |
Sercomm Corporation
|
||||
| 1 | FCC Registration Number (FRN) |
0015548027
|
||||
| 1 | Physical Address |
8F, No. 3-1, YuanQu St, NanKang
|
||||
| 1 |
Taipei, N/A
|
|||||
| 1 |
Taiwan
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
c******@ccsemc.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
P27
|
||||
| 1 | Equipment Product Code |
OC825
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
N**** W****
|
||||
| 1 | Title |
Engineer
|
||||
| 1 | Telephone Number |
886-2******** Extension:
|
||||
| 1 | Fax Number |
886-2********
|
||||
| 1 |
N******@SERCOMM.COM
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Home Security Camera | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power listed is the maximum combined conducted output power. Device is a home security camera operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Compliance Certification Services Inc.
|
||||
| 1 | Name |
K**** C********
|
||||
| 1 | Telephone Number |
886-3******** Extension:
|
||||
| 1 | Fax Number |
886-3********
|
||||
| 1 |
k******@ccsrf.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2412 | 2462 | 0.293 | ||||||||||||||||||||||||||||||||||||
| 1 | 2 | 15C | MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
| 1 | 3 | 15C | MO | 2422 | 2452 | 0.358 | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC