Wingle User Manual V0.5 Oct. 25, 2019 Wingle User Manual v0.4 1 SIM Installation Micro SIM Wingle User Manual v0.4 1 Lift up Antenna Board Wingle User Manual v0.4 2 3 How to Know the Status of Wingle Wi-Fi LED will turn Red when no SIM card is inserted, or is not inserted correctly, or is not readable. Wi-Fi LED will trun Blue when SIM card is ready and LTE LED will start blinking in Green for PLMN searching and network attaching automatically. u LTE LED will stay in Blue/Green/Orange(depends on LTE signal strength) when Wingle is connected to network. u User could also read above statuses from column connection on WebGUI, see more details on page 5. LTE Wi-Fi LTE Wi-Fi Wingle User Manual v0.4 3 USB Interface Remote NDIS is used. Windows 7, 10, Mac OS shall support RNDIS driver. An Ethernet interface will show up if RNDIS driver installed successfully. DHCP IP, 192.168.0.10, will be assigned. The RNDIS driver is supported by MAC OS and Window 7/10. If your machine does not have RNDIS driver installed, please check OS vendor website for help. For Linux OS, please check if RNDIS driver is available. To support Linux CDC-ECM/CDC-EEM driver, please contact with Sales for assistance. Front_LAN Unidentified network Connected Connected Using Multifunction Composite Gadget and IP address is 192.168.0.1 MAC Win dow s Wingle User Manual v0.4 4 How to Get LTE Information Steps:
1. Connect Wingle to laptop/PC via USB interface or Wi-Fi 2. Visit http://192.168.0.1:8080 3. LTE information will show Wingle User Manual v0.4 5 6 How to Configure APN Name Steps:
1. Connect Wingle to laptop/PC via USB interface or Wi-Fi 2. Visit http://192.168.0.1:8080 3. Click 'LTE' on the left menu 4. Click 'Setting 5. Configure APN Name/ Username/
Password if required 6. Click 'Apply'
7. Reboot the device Wingle User Manual v0.4 6 How to Configure Wi-Fi AP Steps:
1. Connect Wingle to laptop/PC via USB interface or Wi-Fi 2. Visit http://192.168.0.1:8080 3. Click 'WiFi' on the left menu 4. Click 'AP Setting 5. Configure SSID and other settings 6. Click 'Apply' to take effect Wingle User Manual v0.4 7 8 How to Upgrade Firmware Steps:
1. Connect Wingle to laptop/PC via USB interface or Wi-Fi 2. Visit http://192.168.0.1:8080 3. Click 'System' on the left menu 4. Click 'Firmware Update'
5. Select Firmware file 6. Select Update Package Format 7. Click 'Update'
Wingle User Manual v0.4 8 9 Check LED Status LED Status Description None Power Off/ System booting Wi-Fi LED Always RED Invalid (U)SIM, SIM card not insterted or PIN locked Wi-Fi LED Always Blue Wi-Fi working LTE LED Always Blue LTE connected and in good signal quality LTE LED Always Green LTE connected and in normal signal quality LTE LED Always Orange LTE connected and in poor signal quality Wingle User Manual v0.4 9 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. The USB dongle transmitter is approved for use in typical laptop computers. To comply with FCC RF exposure requirements, it should not be used in other devices or certain laptop and tablet computer configurations where the USB connectors on the host computer are unable to provide or ensure the necessary operating configurations intended for the device and its users or bystanders to satisfy RF exposure compliance requirements. Wingle User Manual v0.4 10