all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 741.45 KiB | December 18 2017 / June 16 2018 | |||
1 |
|
Internal photos | Internal Photos | 2.13 MiB | December 18 2017 / June 16 2018 | |||
1 |
|
External photos | External Photos | 648.81 KiB | December 18 2017 / June 16 2018 | |||
1 |
|
Label | ID Label/Location Info | 321.20 KiB | December 18 2017 | |||
1 |
|
Agent letter | Cover Letter(s) | 79.42 KiB | December 18 2017 | |||
1 | Antenna spec | Operational Description | December 18 2017 | confidential | ||||
1 | Block diagram | Block Diagram | December 18 2017 | confidential | ||||
1 |
|
Confidentiality request | Cover Letter(s) | 74.17 KiB | December 18 2017 | |||
1 |
|
MPE report | Test Report | 158.50 KiB | December 18 2017 | |||
1 | Operational description | Operational Description | December 18 2017 | confidential | ||||
1 | Schematic | Schematics | December 18 2017 | confidential | ||||
1 |
|
Setup photos | Test Setup Photos | 848.71 KiB | December 18 2017 / June 16 2018 | |||
1 |
|
TR | Test Report | 4.10 MiB | December 18 2017 |
1 | User manual | Users Manual | 741.45 KiB | December 18 2017 / June 16 2018 |
ADT T Pulse ve Solu utions s eInte DB s HD k Inst ractiv C835 Doorb tallatio W ireless Quic bell Ca on Gu amera a ide Pro as perty of ADT is without w T, LLC. Infor warranty of a rmation accu any kind. urate as of pu ublished dat te and is pro vided 20 logo mar 017ADT LLC o, 800 ADT.A rks and/or re C dba ADT S ASAP and th egistered ma Security Serv he product/s arks. Unaut vices. All rig service nam thorized use ghts reserve mes listed in t e is strictly p ed. ADT, the this docume rohibited. ADT ent are DBC C835 Ch hapter 1 1 uctio ntrodu In n 1 This com s Chapter p mponents a provides d and capabi details of th lities. he Doorbell l Camera's s features, Pa ackage C Content ts The e following items are included in n the packa age. 1. D Doorbell C Camera x 1 2. T Two Mount ting Bracke ets (Small
& One gan ng-box size e) 3. W Wood Scre ew/Anchor x 2 4. G Gang Box S Screw x 2 2 D DBC835 W Wireless Doo orbell Came era Installat ion Overview Chapter 1: Introduction DBC835 supports both analog and digital chime within AC 8-24 voltage. The operation temperature is 4F to 122F. (20C to 50C)
(The battery will not be charged when the temperature is < 0C) Figure 1: Front Panel Figure 2: Rear Panel DBC835 Wireless Doorbell Camera Installation 3 Chapter 1: Introduction Physical Details Doorbell/WPS Button This button has two functions:
1. WPS Pin Code Mode. When pressed and held for 0-10 seconds, the doorbell camera will be in the WPS Pin Code mode. LED Behavior Note: When WiFi connection is established, the WPS function is disabled. 2. Doorbell. Press the button to ring the bell. z Off - No power. z On (Blue) - Power On / Network connection is available. Blinking (Green). The WPS connection is active. z z On (Red) - If the LED is on for 5 seconds and then turns off, the WPS function has failed. Blinking (Red) - Network connection is failed. Spinning (Green). The firmware is being upgraded. Intermittent Blinking (Red) If the LED is blinking for 2 seconds, means AC power is disconnected. z z z 4 DBC835 Wireless Doorbell Camera Installation Basic Setup This section provides information on how to assemble and configure the DBC835 Doorbell Camera for enrollment. 2 2 Installation 1. Power Up and check the LED Turn on the switch on the rear side of the doorbell camera and wait for 20 seconds until the LED turns to flashing red. Note 1: The internal battery usually could last 40 minutes of operation. If you dont see the camera powering up, please charge the doorbell camera via Micro USB cable with USB charger for 2 hours before installation. Note 2: If the LED does not flash red, please hold the reset button for 15 seconds to factory default the camera then start the installation process over. Figure 3: Power LED 2. Enroll the Camera in ADT Pulse This process is described in Chapter 3 ADT Pulse Enrollment. 3. Mount the Doorbell Camera Mount the camera in its final permanent location. Please refer to Chapter 4 Hardware Installation for more details. DBC835 Wireless Doorbell Camera Installation 5 ADT Pulse Enrollment This section provides instructions for wirelessly enrolling the DBC835 Doorbell Camera into the ADT Pulse network. This process uses the Wi-Fi Protected Setup (WPS) with PIN method to wirelessly enroll the HD Camera to the gateway via the ADT Pulse Portal or TS Installer App. 3 Using WPS with PIN to Enroll the Doorbell Camera 1. Power up the camera and wait for the LED turning flashing red, as described in the previous chapter. 2. Launch an Internet browser and log in to the Pulse portal or TS installer app. 3. Enter the Manage Devices screen using one of these methods:
x x For the Pulse portal, select the System tab and click Manage Devices. For the TS installer app, click the following Pulse Devices link:
https://portal-aries.icontrol.com/myhome/9.6.0-323/access/signin.jsp 4. In the Manage Devices screen, click Cameras. Figure 4: Clicking "Cameras" Button 6 DBC835 Wireless Doorbell Camera Installation 5. Click the Add Using WPS button at the bottom of the screen. Chapter 3: ADT Pulse Enrollment 2 Figure 5: Clicking "Add Using WPS" Button 6. Locate the cameras PIN number on the label on the rear of the camera. Enter the PIN number in the WPS PIN field. Figure 6: Entering the PIN DBC835 Wireless Doorbell Camera Installation 7 Chapter 3: ADT Pulse Enrollment Pu 7. Press the Ring button, the LED would be turned to blinking green for WPS process. Note: This WPS process must be completed within 2 minutes or else it will be time out. The remaining time is displayed in the upper left portion of the screen. 8. Click the Continue button to initiate the WPS process. Figure 7: Clicking "Continue" Button Figure 8: Add Camera Using WPS Screen 8 DBC835 Wireless Doorbell Camera Installation Chapter 3: ADT Pulse Enrollment If the doorbell camera is enrolled, the Camera Details screen will be displayed. Name the device and select the desired bandwidth & chimer type. Click Save after entering all the data. 2 9. Figure 9: Saving Camera Details 10. The newly-added device will be shown in the Cameras list, then click Go Back at the top left of the screen. Figure 10: Clicking Go Back Button DBC835 Wireless Doorbell Camera Installation 9 Chapter 3: ADT Pulse Enrollment Pu 11. The Manage Devices screen is displayed. Click Close. Figure 11: Manage Devices Screen 12. Click "System" page to check if the device is enrolled already. Figure 12: System Screen 13. Move the camera to where the doorbell button is located and check the LED to see if the camera still has WiFi connectivity. Note: If the WiFi cannot reach the front doorbell camera, you will see the power LED kept blinking red. Then a repeater is required or move the CloudLink/TSS to the center of the house. 10 DBC835 Wireless Doorbell Camera Installation H ardwa are In nstalla ation 4 This Doo s section pr orbell Cam rovides det mera. tails for wa ll mounting g of the DB BC835 Ins stallatio n Note:
Pulse urn off the 1. T Ensure tha before per breaker c at the cam rmanently ircuit. figured and era is conf mounting it t. d enrolled i n ADT 2. Unscrew t recommen F Figure 13:
the legacy doorbell a llation heig nded instal Breaker C nd you wil ght of the c Circuit l find two A camera is a AC wires. (
about 120~
(The
~150cm) Fig gure 14: M Mounting Lo ocation D BC835 Wire eless Doorb bell Camera a Installatio on 11 Chapter 4: Hardware Installation 3. Choose the mounting bracket to be able to cover the hole of the legacy doorbell button. Figure 15: Choosing Mounting Bracket 4. Use the AC wires from the existing traditional doorbell and connect the AC wires to screw terminals of the bracket. Figure 16: Connecting the AC Wires 12 DBC835 Wireless Doorbell Camera Installation 5. Secure the Note: Inse e bracket w ert the anch with screws hors if nec s. Please s essary. see Figure e 17. Chapter 4:
: Hardware e Installatio on 6. A d Attach the d oorbell cam Caution:
attach th Fig doorbell ca mera is firm To avoid he camera ure 17: Ins amera to th mly fixed a damaging to the mou stalling the he mountin and working the rubber unting brac e Screws g bracket. g properly. r of the po go pin, ple ontally. cket horizo Make sure e the ease the Camer ra to the Br racket Attaching t ircuit. working no nected prop Figure 18: A F breaker c urn on the 7. T e chime is w Check if the 8. C A C wires ar re not conn econds. se N ote 1: Plea ty ype could b N ote 2: Com no ot working N Note 3: Che a a WiFi repe ase check be manage mpatibility I properly, eck WiFi s eater or mo ormally afte perly, the r er pushing red LED w the Ring b will blink eve button. If ery 5 if the soun ed in ADT p Issue of dig please cha ignal and i ove the Clo nd of chime pulse enro gital chime ange to An f the powe oudLink/TS er works as ollment pro e models a nalog Chim er LED blin SS to the c s usual. Th cess. and if the c mer. nks red, ple center of th he chime himer is ease add e house. DB BC835 Wire eless Doorb ell Camera a Installation n 13 Appendix Chime Compatibility List Chime Compatibility List Utilitech Model # UT-27103-02 A Utilitech Utilitech Model # UT-2735-02 Model # UT-7574-02 IQ America Model # DW-2403A Hampton Bay Model # HB-7621-02 Honeywell Honeywell NuTone NuTone Model# RCW102N Model# RCW251N Model# LA100WH Model# LA126WH Heath Zenith Model# DC3360
14 DBC835 Wireless Doorbell Camera Installation Appendix A: Chime Compatibility List Regulatory Approvals FCC Statement (US) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
x Reorient or relocate the receiving antenna.
x x Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver.
which the receiver is connected.
x Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). RF Exposure Part This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. DBC835 Wireless Doorbell Camera Installation 15 Appendix A: Chime Compatibility List IC Statement (Canada) This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage ;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. Exposure This device meets the exemption from the routine evaluation limits in section 2.5 of RSS102 and users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. 16 DBC835 Wireless Doorbell Camera Installation
1 | Internal photos | Internal Photos | 2.13 MiB | December 18 2017 / June 16 2018 |
ompliance Certification Services Inc. Report No.: T170922D02 INTERNAL PHOTOGRAPHS OF EUT A1 - 6 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 7 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 8 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 9 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 10 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 11 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 12 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 Module & Crystal A1 - 13 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 Antenna A1 - 14 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 15 / 15 Rev. 00
1 | External photos | External Photos | 648.81 KiB | December 18 2017 / June 16 2018 |
ompliance Certification Services Inc. Report No.: T170922D02 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT A1 - 1 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 2 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 3 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 4 / 15 Rev. 00 ompliance Certification Services Inc. Report No.: T170922D02 A1 - 5 / 15 Rev. 00
1 | Label | ID Label/Location Info | 321.20 KiB | December 18 2017 |
Bottom Model No.: DBC835 apr Product Name: Wireless HD DoorBell Camera HW vP2.1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID P27DBC835. IC:527A-DBC835 Input:AC 5-24V Made in Taiwan|
932CLYOOMY Model No.: DBC835 Product Name: Wireless HD DoorBell Camera HW vP2.1 This device complies with Part 15 of the FCC Rules. Operation is subject te the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID P27DBC835 IC:527A-DBC835 Input:AC 5-24V Mad Taiwan
1 | Agent letter | Cover Letter(s) | 79.42 KiB | December 18 2017 |
Date: 12 December 2017 TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: P27DBC835 To whom it may concern:
We, the undersigned, hereby authorize Sam Chuang in Compliance Certification Services Inc. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Sercomm Corporation. This authorization is valid until further written notice from the applicant. Name (Printed): Nick Wu Title: Engineer Signature:
On behalf of Company: Sercomm Corporation Address : 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Telephone: +886-2-2655-3988 ext. 2631 E-mail: Nick_wu@SERCOMM.COM
1 | Confidentiality request | Cover Letter(s) | 74.17 KiB | December 18 2017 |
To:
SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Regarding: Confidentiality Request regarding application for FCC ID P27DBC835 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematics Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. If the device is marketed within 180 days of External Photos Internal Photos Test Setup Photos User manual Sincerely, Signature:
Name (Printed): Nick Wu On behalf of Company: Sercomm Corporation Address : 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Telephone: +886-2-2655-3988 ext. 2631 E-mail: Nick_wu@SERCOMM.COM Title: Engineer
1 | MPE report | Test Report | 158.50 KiB | December 18 2017 |
Compliance Certification Services Inc. Report No.: T170922D02-MF IEEE C95.1 2005 KDB 447498 D01 V06 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For Wireless HD DoorBell Camera Model: DBC835 Trade Name: ADT Issued to Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com service@ccsrf.com Issued Date: December 7, 2017 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 1 Rev.00 Compliance Certification Services Inc. Report No.: T170922D02-MF Rev. Issue Date 00 December 7, 2017 Initial Issue Revisions Effect Page Revised By ALL Allison Chen Revision History This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 2 Rev.00 Compliance Certification Services Inc. Report No.: T170922D02-MF TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ......................................................................... 4 2. LIMIT
...................................................................... 5 3. EUT SPECIFICATION .......................................................................................... 5 4. TEST RESULTS ................................................................................................... 6 5. MAXIMUM PERMISSIBLE EXPOSURE .............................................................. 7 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 3 Rev.00 Compliance Certification Services Inc. Report No.: T170922D02-MF 1. TEST RESULT CERTIFICATION We hereby certify that:
The equipment has been tested by Compliance Certification Services Inc., and found compliance with the requirement of the applicable standards. The test record, data evaluation and Equipment under Test (EUT) configurations represented herein are true and accurate accounts of the measurement of the samples RF characteristics under the conditions specified in this report. APPLICABLE STANDARDS STANDARD IEEE C95.1 2005 KDB 447498 D03 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 TEST RESULT No non-compliance noted Approved by:
Prepared by:
Sam Chuang Manager Compliance Certification Services Inc. Allison Chen Report coordinator Compliance Certification Services Inc. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 4 Rev.00 Compliance Certification Services Inc. Report No.: T170922D02-MF 2. LIMIT According to 15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See 1.1307(b)(1) of this chapter. 3. EUT SPECIFICATION Product Wireless HD DoorBell Camera Model DBC835 Brand name ADT Model Discrepancy N/A Frequency band
(Operating) Bluetooth 2.1 + EDR / 4.0: 2402 MHz ~ 2480 MHz 802.11b/g/n HT20: 2412MHz ~ 2462MHz 802.11n HT40: 2422MHz ~ 2452MHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure
(S=1mW/cm2) 2.4G PIFA Antenna / Gain: 0dBi Antenna Specification Maximum Tune up Power Evaluation applied MPE Evaluation*
SAR Evaluation N/A This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 5 Rev.00 2.4GHz: Antenna Gain :0.00 dBi(Numeric gain:1.00)WorstIEEE 802.11b Mode:24.00 dBm(251.19 mW)IEEE 802.11g Mode:20.00 dBm(100.00 mW)IEEE 802.11n HT 20 Mode: 20.00 dBm(100.00 mW) Compliance Certification Services Inc. Report No.: T170922D02-MF 4. TEST RESULTS No non-compliance noted. Calculation Given
&
Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields:
Changing to units of mW and cm, using:
Yields P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 6 Rev.00 dGPE303772ES237730dGPS220796.0100/3771000/30dGPdGPS Compliance Certification Services Inc. Report No.: T170922D02-MF 5. MAXIMUM PERMISSIBLE EXPOSURE Substituting the MPE safe distance using d = 20 cm into Equation 1:
Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 IEEE 802.11b mode:
IEEE 802.11g mode:
IEEE 802.11n HT 20 mode:
This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 7 Rev.00 GPS000199.0Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)62437251.191.00200.05001Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)624371001.00200.01991Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)624371001.00200.01991
1 | Setup photos | Test Setup Photos | 848.71 KiB | December 18 2017 / June 16 2018 |
Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP APPENDIX-I Test Photo Radiation (Below 1GHz) Radiation (Above 1GHz) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 77 / 79 Rev.01 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Conducted Emission Set Up Photo This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 78 / 79 Rev.01 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP RF Conducted Emission Set Up Photo This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 79 / 79 Rev.01
1 | TR | Test Report | 4.10 MiB | December 18 2017 |
Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP FCC RADIO TEST REPORT FCC 47 CFR PART 15 SUBPART C Test Standard FCC Part 15.247 FCC ID P27DBC835 Brand name Applicant Product name ADT Sercomm Corporation Wireless HD DoorBell Camera Model No. DBC835 Test Result Pass The test Result was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were given in ANSI C63.10: 2013 and compliance standards. The test results of this report relate only to the tested sample (EUT) identified in this report. The test Report of full or partial shall not copy. Without written approval of Compliance Certification Services Inc (Wugu Laboratory). Approved by:
Sam Chuang Manager Tested by:
Jerry Chuang Engineer This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 1 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Revision History Rev. 00 01 02 Issue Date December 1, 2017 December 14, 2017 December 15, 2017 Revisions Initial Issue 1. Modify section 1.6 in P.7. 1. Modify section 1.6 in P.7. 2. Modify section 4.6.2 in P.42. Revised By Allison Chen Angel Cheng Angel Cheng This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 2 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Table of contents 1. GENERAL INFORMATION ............................................................................................... 4 1.1 EUT INFORMATION .......................................................................................................... 4 1.2 EUT CHANNEL INFORMATION ........................................................................................ 5 1.3 ANTENNA INFORMATION ................................................................................................ 5 1.4 MEASUREMENT UNCERTAINTY ..................................................................................... 6 1.5 FACILITIES AND TEST LOCATION .................................................................................. 7 1.6 INSTRUMENT CALIBRATION ........................................................................................... 7 1.7 SUPPORT AND EUT ACCESSORIES EQUIPMENT ......................................................... 8 1.8 TEST METHODOLOGY AND APPLIED STANDARDS ...................................................... 8 2. TEST SUMMERY .............................................................................................................. 9 3. DESCRIPTION OF TEST MODES ................................................................................... 10 3.1 THE WORST MODE OF OPERATING CONDITION ....................................................... 10 3.2 THE WORST MODE OF MEASUREMENT ..................................................................... 11 3.3 EUT DUTY CYCLE .......................................................................................................... 12 4. TEST RESULT ................................................................................................................ 13 4.1 AC POWER LINE CONDUCTED EMISSION ................................................................... 13 4.2 6DB BANDWIDTH AND OCCUPIED BANDWIDTH(99%) ................................................ 16 4.3 OUTPUT POWER MEASUREMENT ............................................................................... 24 4.4 POWER SPECTRAL DENSITY ....................................................................................... 26 4.5 CONDUCTED BANDEDGE AND SPURIOUS EMISSION ............................................... 31 4.6 RADIATION BANDEDGE AND SPURIOUS EMISSION .................................................. 41 APPENDIX 1 - PHOTOGRAPHS OF EUT This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 3 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 1. GENERAL INFORMATION 1.1 EUT INFORMATION Applicant Manufacturer Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Equipment Wireless HD DoorBell Camera Model Name DBC835 Model Discrepancy N/A Received Date September 22, 2017 Date of Test November 10 ~ November 29, 2017 Output Power(W) Power Operation Mode IEEE 802.11b mode IEEE 802.11g mode Output Power Output Power
(dBm) 24.46 24.59 24.53
(W) 0.2793 0.2877 0.2838 IEEE 802.11n HT 20 MHz mode 1. VDC from Power Adapter Phihong / PSAA05A-050QL6 I/P: 100-240Vac, 50-60Hz, 0.2A, 11-15VA O/P: 5Vdc / 1A 2.Powered from host device via USB Cable This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 4 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 1.2 EUT CHANNEL INFORMATION Frequency Range 2412MHz-2462MHz Modulation Type Bandwidth 1. IEEE 802.11b mode: CCK 2. IEEE 802.11g mode: OFDM 3. IEEE 802.11n HT 20 MHz mode: OFDM 1. IEEE 802.11b mode: 11 Channels 2. IEEE 802.11g mode: 11 Channels 3. IEEE 802.11n HT 20 MHz mode: 11 Channels Remark:
Refer as ANSI 63.10:2013 clause 5.6.1 Table 4 for test channels Number of frequencies to be tested Frequency range in which device operates Number of frequencies 1 MHz or less 1 MHz to 10 MHz More than 10 MHz 1 2 3 Location in frequency range of operation Middle 1 near top and 1 near bottom 1 near top, 1 near middle, and 1 near bottom 1.3 ANTENNA INFORMATION Antenna Type PIFA PCB Dipole Coils Antenna Gain 0 dBi This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 5 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 1.4 MEASUREMENT UNCERTAINTY PARAMETER UNCERTAINTY AC Powerline Conducted Emission Emission bandwidth, 20dB bandwidth RF output power, conducted Power density, conducted 3M Semi Anechoic Chamber / 30M~200M 3M Semi Anechoic Chamber / 200M~1000M 3M Semi Anechoic Chamber / 1G~8G 3M Semi Anechoic Chamber / 8G~18G 3M Semi Anechoic Chamber / 18G~26G 3M Semi Anechoic Chamber / 26G~40G 3M Semi Anechoic Chamber / 40G~60G 3M Semi Anechoic Chamber / 60G~75G 3M Semi Anechoic Chamber / 75G~110G 3M Semi Anechoic Chamber / 110G~170G 3M Semi Anechoic Chamber / 170G~220G 3M Semi Anechoic Chamber / 220G~325G
+/- 1.2575
+/- 1.4003
+/- 1.1372
+/- 1.4003
+/- 4.0138
+/- 3.9483
+/- 2.5975
+/- 2.6112
+/- 2.7389
+/- 2.9683
+/- 1.8509
+/- 1.9869
+/- 2.9651
+/- 2.7807
+/- 3.6437
+/- 4.2982 Remark:
1.This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2 2. ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 6 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 1.5 FACILITIES AND TEST LOCATION All measurement facilities used to collect the measurement data are located at No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) Test site AC Conduction Room Radiation RF Conducted Test Engineer Ray Huang Jerry Chuang Eric Lee Remark
-
-
-
Remark: The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22. 1.6 INSTRUMENT CALIBRATION Equipment Power Meter Power Sensor Spectrum Analyzer Thermostatic/Hrgrosatic Chamber SUCOFLEX Cable Divider Coupler RF Conducted Test Site Manufacturer Anritsu Anritsu R&S Model ML2495A MA2411B FSV 40 GWINSTEK GTC-288MH-CC S/N 1033009 917072 101073 Cal Date Cal Due 04/11/2017 04/10/2018 07/03/2017 07/02/2018 10/02/2017 10/01/2018 TH160402 05/23/2017 05/22/2018 HUBER SUHNER Solvang Technology Agilent SUCOFLEX 104PEA 25157 07/31/2017 07/30/2018 2-18GHz 4Way 87301d STI08-0015 07/26/2017 07/25/2018 MY44350252 07/25/2017 07/24/2018 Wugu 966 Chamber A Equipment Bilog Antenna Manufacturer Sunol Sciences EMI Test Receiver R&S Horn Antenna K Type Cable K Type Cable Pre-Amplifier Pre-Amplifier Pre-Amplifier Spectrum Analyzer Antenna Tower Controller Turn Table ETS LINDGREN Huber+Suhner Huber+Suhner MITEQ EMCI EMEC Agilent CCS CCS CCS Model JB3 ESCI 3117 SUCOFLEX 102 SUCOFLEX 102 AMF-6F-260400-40-8P EMC 012635 EM330 E4446A CC-A-1F CC-C-1F CC-T-1F S/N Cal Date Cal Due 06/20/2017 06/19/2018 A030105 100064 05/17/2017 05/16/2018 00055165 02/20/2017 02/19/2018 29406/2 01/10/2017 01/09/2018 01/10/2017 01/09/2018 22470/2 01/10/2017 01/09/2018 985646 980151 08/01/2017 07/31/2018 07/31/2017 07/30/2018 060609 US42510252 11/27/2017 11/26/2018 N/A N/A N/A N.C.R N.C.R N.C.R N.C.R N.C.R N.C.R Conducted Emission Room # B Name of Equipment LISN LISN Name of Equipment R&S SCHWARZBECK EMI Test Receiver R&S Name of Equipment ENV216 NSLK 8127 ESCI Name of Name of Name of Equipment 101054 8127-541 100064 Equipment Equipment 05/18/2017 05/17/2018 02/14/2017 02/13/2018 05/17/2017 05/16/2018 Remark: Each piece of equipment is scheduled for calibration once a year. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 7 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 1.7 SUPPORT AND EUT ACCESSORIES EQUIPMENT EUT Accessories Equipment No. Equipment Brand Model Series No. FCC ID N/A Support Equipment No. 1 Equipment NB(G) Brand Lenovo Model Series No. IBM 1951 N/A FCC ID N/A 1.8 TEST METHODOLOGY AND APPLIED STANDARDS The test methodology, setups and results comply with all requirements in accordance with ANSI C63.10:2013, FCC Part 2, FCC Part 15.247, KDB 558074 D01 v04. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 8 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 2. TEST SUMMERY FCC Standard Section 15.203 15.207(a) 15.247(a)(2)
-
15.247(b) 15.247(e) 15.247(d) 15.247(d) 15.247(d) 15.247(d) Report Section Test Item Result 1.2 4.1 4.2 4.2 4.3 4.4 4.5 4.5 4.6 4.6 Antenna Requirement AC Conducted Emission 6 dB Bandwidth Occupied Bandwidth (99%) Output Power Measurement Power Spectral Density Conducted Band Edge Conducted Emission Radiation Band Edge Radiation Spurious Emission Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 9 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 3. DESCRIPTION OF TEST MODES 3.1 THE WORST MODE OF OPERATING CONDITION Operation mode Test Channel Frequencies IEEE 802.11b mode :1Mbps IEEE 802.11g mode :6Mbps IEEE 802.11n HT20 mode :MCS0 IEEE 802.11b mode :
1. Lowest Channel : 2412MHz 2. Middle Channel : 2437MHz 3. Highest Channel : 2462MHz IEEE 802.11g mode :
1. Lowest Channel : 2412MHz 2. Middle Channel : 2437MHz 3. Highest Channel : 2462MHz IEEE 802.11n HT20 mode :
1. Lowest Channel : 2412MHz 2. Middle Channel : 2437MHz 3. Highest Channel : 2462MHz Remark:
1. EUT pre-scanned data rate of output power for each mode, the worst data rate were recorded in this report. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 10 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 3.2 THE WORST MODE OF MEASUREMENT AC Power Line Conducted Emission Test Condition AC Power line conducted emission for line and neutral Voltage/Hz 120V/60Hz Test Mode Mode 1:EUT power by AC adapter via power cable. Worst Mode Mode 1 Mode 2 Mode 3 Mode 4 Radiated Emission Measurement Above 1G Test Condition Band edge, Emission for Unwanted and Fundamental Voltage/Hz Test Mode Worst Mode Worst Position Worst Polarity 120V/60Hz Mode 2 Mode 3 Mode 1:EUT power by AC adapter via power cable. Mode 1 Placed in fixed position. Placed in fixed position at X-Plane (E2-Plane) Placed in fixed position at Y-Plane (E1-Plane) Placed in fixed position at Z-Plane (H-Plane) Horizontal Mode 4 Vertical Radiated Emission Measurement Below 1G Test Condition Voltage/Hz Radiated Emission Below 1G 120V/60Hz Test Mode Mode 1:EUT power by AC adapter via power cable. Worst Mode Mode 1 Mode 2 Mode 3 Mode 4 Remark:
1. The worst mode was record in this test report. 2. EUT pre-scanned in three axis ,X,Y, Z and two polarity, Horizontal and Vertical for radiated measurement. The worst case(X-Plane and Horizontal) were recorded in this report 3. For below 1G, AC power line conducted emission and radiation emission were performed the EUT transmit at the highest output power channel as worse case. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 11 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 3.3 EUT DUTY CYCLE Configuration TX ON (ms) TX ALL (ms) Duty Cycle (%) Duty Factor(dB) Duty Cycle 802.11b 802.11g 802.11n HT20
--
2.09 2.11 802.11b
--
2.15 2.14 100.00%
97.21%
98.60%
0.00 0.12 0.06 802.11g 802.11n HT20 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 12 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4. TEST RESULT 4.1 AC POWER LINE CONDUCTED EMISSION 4.1.1 Test Limit According to 15.207(a)(2) Frequency Range
(MHz) 0.15 to 0.50 0.50 to 5 5 to 30 Limits(dBV) Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50
* Decreases with the logarithm of the frequency. 4.1.2 Test Procedure Test method Refer as ANSI 63.10:2013 clause 6.2, 1. The EUT was placed on a non-conducted table, which is 0.8m above horizontal ground plane and 0.4m above vertical ground plane. 2. EUT connected to the line impedance stabilization network (LISN) 3. Receiver set RBW of 9kHz and Detector Peak, and note as quasi-peak and average. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. Recorded Line for Neutral and Line. 4.1.3 Test Setup Vertical reference ground plane EMI receiver 40c m EUT 80cm LISN 4.1.4 Test Result Pass. Horizontal reference ground plane This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 13 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Data Test Mode:
Test Voltage:
Phase:
Mode 1 120Vac / 60Hz Line Temp/Hum Test Date Test Engineer 24()/ 50%RH November 13, 2017 Ray Huang Frequency
(MHz) Quasi Peak reading
(dBuV) Average reading
(dBuV) Correction factor
(dB) 0.1540 0.1820 0.2940 0.4380 0.6700 11.4020 48.45 51.07 38.12 35.26 37.82 41.41 30.72 30.50 23.59 23.87 27.87 30.77 0.05 0.05 0.05 0.05 0.06
-0.01 Quasi Peak result
(dBuV) 48.50 51.12 38.17 35.31 37.88 41.40 Average result
(dBuV) Quasi Peak limit
(dBuV) Average limit
(dBuV) Quasi Peak margin
(dB) Average margin
(dB) Remark 30.77 30.55 23.64 23.92 27.93 30.76 65.78 64.39 60.41 57.10 56.00 60.00 55.78 54.39 50.41 47.10 46.00 50.00
-17.28
-13.27
-22.24
-21.79
-18.12
-18.60
-25.01 Pass
-23.84 Pass
-26.77 Pass
-23.18 Pass
-18.07 Pass
-19.24 Pass This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 14 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode:
Test Voltage:
Phase:
Mode 1 120Vac / 60Hz Line Temp/Hum Test Date Test Engineer 24()/ 50%RH November 13, 2017 Ray Huang Frequency
(MHz) 0.1620 0.2100 0.2580 0.6660 1.6020 10.3420 Quasi Peak reading
(dBuV) 39.76 40.88 31.56 35.24 28.61 32.52 Average reading
(dBuV) Correction factor
(dB) 22.44 23.88 16.93 27.37 20.95 23.36 0.12 0.12 0.12 0.14 0.16 0.35 Quasi Peak result
(dBuV) 39.88 41.00 31.68 35.38 28.77 32.87 Average result
(dBuV) 22.56 24.00 17.05 27.51 21.11 23.71 Quasi Peak limit
(dBuV) 65.36 63.21 61.50 56.00 56.00 60.00 Average limit
(dBuV) 55.36 53.21 51.50 46.00 46.00 50.00 Quasi Peak margin
(dB)
-25.48
-22.21
-29.82
-20.62
-27.23
-27.13 Average margin
(dB) Remark
-32.80 Pass
-29.21 Pass
-34.45 Pass
-18.49 Pass
-24.89 Pass
-26.29 Pass This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 15 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.2 6DB BANDWIDTH AND OCCUPIED BANDWIDTH(99%) 4.2.1 Test Limit According to 15.247(a)(2) 6 dB Bandwidth Limit Shall be at least 500kHz Occupied Bandwidth(99%) For reporting purposes only. 4.2.2 Test Procedure Test method Refer as KDB 558074 D01 v04, Section 8.1 and ANSI 63.10:2013 clause 6.9.2, 1. The EUT RF output connected to the spectrum analyzer by RF cable. 2. Setting maximum power transmit of EUT 3. SA set RBW = 100kHz, VBW = 300kHz and Detector = Peak, to measurement 6 dB Bandwidth and 99% Bandwidth. 4. Measure and record the result of 6 dB Bandwidth and 99% Bandwidth. in the test report. 4.2.3 Test Setup This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 16 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.2.4 Test Result Test mode: IEEE 802.11b mode / 2412-2462 MHz Channel Frequency
(MHz) Low Mid High 2412 2437 2462 Chain 0 Chain 1 OBW(99%) OBW(99%) Chain 0 6dB BW Chain 1 6dB BW 6dB limit
(MHz) 14.7612 14.0231 13.9363
(MHz)
-
-
-
(MHz) 9.9994 9.0435 9.0428
(MHz)
-
-
-
Test mode: IEEE 802.11g mode / 2412-2462 MHz Chain 0 Chain 1 OBW(99%) OBW(99%) Chain 0 6dB BW Chain 1 6dB BW 6dB limit
(MHz) 16.3675 16.7149 16.2373
(MHz)
-
-
-
(MHz) 15.3437 15.1304 15.1304
(MHz)
-
-
-
Test mode: IEEE 802.11n HT 20 MHz mode / 2412-2462 MHz Chain 0 Chain 1 OBW(99%) OBW(99%) Chain 0 6dB BW Chain 1 6dB BW 6dB limit
(MHz) 17.4529 17.7568 17.3227
(MHz)
-
-
-
(MHz) 15.1739 15.1739 15.1304
(MHz)
-
-
-
Channel Frequency
(MHz) Low Mid High 2412 2437 2462 Channel Frequency
(MHz) Low Mid High 2412 2437 2462
(kHz) 500
(kHz) 500
(kHz) 500 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 17 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Mid CH Test Data IEEE 802.11b mode- chain 0 6dB Low CH High CH This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 18 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Mid CH IEEE 802.11g mode- chain 0 6dB Low CH High CH This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 19 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP IEEE 802.11n HT20 mode- chain 0 6dB Mid CH Low CH High CH This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 20 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Mid CH Test Data IEEE 802.11b mode- chain 0 OBW (99%) Low CH High CH This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 21 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Mid CH IEEE 802.11g mode- chain 0 OBW (99%) Low CH High CH This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 22 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP IEEE 802.11n HT20 mode- chain 0 OBW (99%) Mid CH Low CH High CH This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 23 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.3 OUTPUT POWER MEASUREMENT 4.3.1 Test Limit According to 15.247(b) Peak output power For systems using digital modulation in the 2400-2483.5 MHz, and 5725-5850 MHz bands: 1 Watt(30 dBm) and the e.i.r.p. shall not exceed 4Watt(36 dBm), base on the use of antennas with directional gain not exceed 6 dBi If transmitting antennas of directional gain greater than 6dBi are used the peak output power the conducted output power from the intentional radiator shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. In case of point-to-point operation, the limit has to be reduced by 1dB for every 3 dB that the directional gain of the antenna exceeds 6 dBi. Limit Antenna not exceed 6 dBi30dBm Antenna with DG greater than 6 dBi
[Limit = 30 (DG 6)]
Point-to-point operation Average output powerFor reporting purposes only. 4.3.2 Test Procedure Test method Refer as KDB 558074 D01 v04, Section 9.1.2. 1. The EUT RF output connected to the power meter by RF cable. 2. Setting maximum power transmit of EUT. 3. The path loss was compensated to the results for each measurement. 4. Measure and record the result of Peak output power and Average output power. in the test report. 4.3.3 Test Setup This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 24 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.3.4 Test Result Peak output power Average output power This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 25 / 79 Rev.02 chain0chain1chain0chain1Low241218-21.10-21.100.128821.100.1288Mid243720-24.46-24.460.279324.460.2793High246218-21.11-21.110.129121.110.1291Low241216-24.02-24.020.252324.020.2523Mid243718-24.59-24.590.287724.590.2877High246216-24.21-24.210.263624.210.2636Low241215-24.07-24.070.255324.070.2553Mid243718-24.53-24.530.283824.530.2838High246216-24.13-24.130.258824.130.2588Limit(dBm)EIRP PKTotalPower(dBm)EIRP PKTotalPower(W)EIRPLimit(dBm)Wifi 2.4GConfigCHFreq.(MHz)PK Power(dBm)PK TotalPower(dBm)PK TotalPower(W)DG(dBi)power set36 IEEE802.11bData rate:1Mbps030 IEEE802.11gData rate:6MbpsIEEE802.11nHT20Data rate:MCS8chain0chain1Low241219.02-19.02Mid243723.03-23.03High246218.94-18.94Low241216.41-16.41Mid243719.29-19.29High246216.19-16.19Low241215.45-15.45Mid243719.18-19.18High246216.21-16.21 IEEE802.11bData rate:1Mbps IEEE802.11gData rate:6MbpsIEEE802.11nHT20Data rate:MCS0Wifi 2.4GConfigCHFreq.(MHz)AV Power(dBm)AV TotalPower (dBm) Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.4 POWER SPECTRAL DENSITY 4.4.1 Test Limit According to 15.247(e) For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. Limit Antenna not exceed 6 dBi8dBm Antenna with DG greater than 6 dBi
[ Limit = 8 (DG 6) ]
Point-to-point operation 4.4.2 Test Procedure Test method Refer as KDB 558074 D01 v04, Section 10.2 1. The EUT RF output connected to the spectrum analyzer by RF cable. 2. Setting maximum power transmit of EUT 3. SA set RBW = 3kHz, VBW = 30kHz, Span = 1.5 times DTS Bandwidth (6 dB BW), Detector = Peak, Sweep Time = Auto and Trace = Max hold. 4. The path loss and Duty Factor were compensated to the results for each measurement by SA. 5. Mark the maximum level. 6. Measure and record the result of power spectral density. in the test report. 4.4.3 Test Setup This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 26 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.4.4 Test Result Test mode: IEEE 802.11b mode / 2412-2462 MHz Channel Frequency
(MHz) Low Mid High 2412 2437 2462 Chain 0 PPSD
(dBm)
-1.13
-4.51
-3.09 Chain 1 PPSD
(dBm)
-
-
-
Total PSSD
(dBm)
-1.13
-4.51
-3.09 Test mode: IEEE 802.11g mode / 2412-2462 MHz Channel Frequency
(MHz) Low Mid High 2412 2437 2462 Chain 0 PPSD
(dBm)
-7.72
-4.89
-7.01 Chain 1 PPSD
(dBm)
-
-
-
Total PSSD
(dBm)
-7.72
-4.89
-7.01 Test mode: IEEE 802.11n HT 20 MHz mode / 2412-2462 MHz Channel Frequency
(MHz) Low Mid High 2412 2437 2462 Chain 0 PPSD
(dBm)
-10.05
-4.68
-7.88 Chain 1 PPSD
(dBm)
-
-
-
Total PSSD
(dBm)
-10.05
-4.68
-7.88 Limit
(dBm) 8 Limit
(dBm) 8 Limit
(dBm) 8 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 27 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Mid CH Test Data IEEE 802.11b mode- chain 0 Low CH High CH This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 28 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Mid CH IEEE 802.11g mode- chain 0 Low CH High CH This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 29 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP IEEE 802.11n HT20 mode- chain 0 Low CH Mid CH High CH This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 30 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.5 CONDUCTED BANDEDGE AND SPURIOUS EMISSION 4.5.1 Test Limit According to 15.247(d) In any 100 kHz bandwidth outside the authorized frequency band, Non-restricted bands shall be attenuated at least 20 dB/30 dB relative to the maximum PSD level in 100 kHz by RF conducted or a radiated measurement which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a). 4.5.2 Test Procedure Test method Refer as KDB 558074 D01 v04, Section 11. 1. EUT RF output port connected to the SA by RF cable, and the path loss was compensated to result. 2. SA setting, RBW=100kHz, VBW=300kHz, Detector=Peak, Trace mode = max hold, SWT = Auto. 3. In any 100 kHz bandwidth outside the authorized frequency band, shall be attenuated at least 20 dB relative to the maximum in-band peak PSD level in 100 kHz when conducted power procedure is used. f the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. 4.5.3 Test Setup This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 31 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.5.4 Test Result Test Data Reference Level of PSD in 100kHz Band Edge IEEE 802.11b mode Low CH chain 0 Spurious Emission 30MHz-25GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 32 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Reference Level of PSD in 100kHz Spurious Emission 30MHz-25GHz IEEE 802.11b mode Mid CH chain 0 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 33 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Reference Level of PSD in 100kHz Band Edge IEEE 802.11b mode High CH chain 0 Spurious Emission 30MHz-25GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 34 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Reference Level of PSD in 100kHz Band Edge IEEE 802.11g mode Low CH chain 0 Spurious Emission 30MHz-25GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 35 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Reference Level of PSD in 100kHz Spurious Emission 30MHz-25GHz IEEE 802.11g mode Mid CH chain 0 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 36 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Reference Level of PSD in 100kHz Band Edge IEEE 802.11g mode High CH chain 0 Spurious Emission 30MHz-25GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 37 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Reference Level of PSD in 100kHz Band Edge IEEE 802.11 n HT20 mode Low CH chain 0 Spurious Emission 30MHz-25GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 38 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Reference Level of PSD in 100kHz Spurious Emission 30MHz-25GHz IEEE 802.11 n HT20 mode Mid CH chain 0 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 39 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Reference Level of PSD in 100kHz Band Edge IEEE 802.11n HT20 mode High CH chain 0 Spurious Emission 30MHz-25GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 40 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.6 RADIATION BANDEDGE AND SPURIOUS EMISSION 4.6.1 Test Limit FCC according to 15.247(d), 15.209 and 15.205, In any 100 kHz bandwidth outside the authorized frequency band, all harmonic and spurious must be least 20 dB below the highest emission level with the authorized frequency band. Radiation emission which fall in the restricted bands must also follow the FCC section 15.209 as below limit in table. Below 30 MHz Frequency 9-490 kHz 490-1,705 kHz 1.705-30 MHz Above 30 MHz Frequency
(MHz) 30-88 88-216 216-960 Above 960 Field Strength
(microvolts/m) 2,400/F (F in kHz) 24,000/F (F in kHz) 30 Magnetic H-Field
(microamperes/m) 2,400/F (F in kHz) 24,000/F (F in kHz) N/A Measurement Distance
(metres) 300 30 30 Field Strength microvolts/m at 3 metres (watts, e.i.r.p.) Transmitters 100 (3 nW) 150 (6.8 nW) 200 (12 nW) 500 (75 nW) Receivers 100 (3 nW) 150 (6.8 nW) 200 (12 nW) 500 (75 nW) Remark:
Although these tests were performed other than open area test site, adequate comparison measurements were confirmed against 30 m open are test site. Therefore sufficient tests were made to demonstrate that the alternative site produces results that correlate with the ones of tests made in an open field based on KDB 937606. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 41 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.6.2 Test Procedure Test method Refer as KDB 558074 D01 v04, Section 12.1. 1. The EUT is placed on a turntable, Above 1 GHz is 1.5m and below 1 GHz is 0.8m above ground plane. The EUT Configured un accordance with ANSI C63.10, and the EUT set in a continuous mode. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. And EUT is set 3m away from the receiving antenna, which is scanned from 1m to 4m above the ground plane to find out the highest emissions. Measurement are made polarized in both the vertical and the horizontal positions with antenna. 3. Span shall wide enough to full capture the emission measured. The SA from 30MHz to 26.5GHz set to the low, Mid and High channels with the EUT transmit. 5. The SA setting following
(1) Below 1GRBW = 100kHz, VBW 3 RBW, Sweep = Auto, Detector = Peak, Trace
= Max hold.
(2) Above 1G
(2.1) For Peak measurementRBW = 1MHz, VBW 3 RBW, Sweep = Auto, Detector = Peak, Trace = Max hold.
(2.2) For Average measurementRBW = 1MHz, VBW If Duty Cycle 98%, VBW=10Hz. If Duty Cycle < 98%, VBW=1/T. Configuration Duty Cycle (%) 802.11b 802.11g 802.11n HT20 100%
97%
99%
T(ms)
--
2.0900 2.1100 1/T (kHz) VBW Setting
--
0.478 0.474 10Hz 470Hz 10Hz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 42 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.6.3 Test Setup 9kHz ~ 30MHz 30MHz ~ 1GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 43 / 79 Rev.02 Spectrum / Receiver 3m 1m Turntable EUT 0.8m Loop antenna Reference ground plane Spectrum analyzer 3m 4m 1m Turntable EUT 0.8m Antenna tower Reference ground plane Bi-log antenna Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Above 1 GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 44 / 79 Rev.02 Spectrum analyzer Horn antenna 3m 4m 1m Turntable EUT 1.5m Antenna tower Pre-amp Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP 4.6.4 Test Result Band Edge Test Data Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Test Mode Test Item Polarize Detector IEEE 802.11b Low CH Band Edge Horizontal Peak Frequency
(MHz) 2386.832 2411.920 Reading
(dBuV) 61.30 113.20 Correct Factor
(dB/m)
-2.99
-2.92 Result
(dBuV/m) Limit
(dBuV/m) 74.00
-
58.31 110.28 Margin
(dB)
-15.69
-
Remark peak peak This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 45 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11b Low CH Band Edge Horizontal Average Temperature:
Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 2382.688 2411.248 54.04 109.75 Correct Factor
(dB/m)
-3.00
-2.92 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark 54.00
-
-2.96
-
AVG AVG 51.04 106.83 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 46 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11b High CH Band Edge Horizontal Peak Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 2462.000 2488.100 112.72 60.25 Correct Factor
(dB/m)
-2.76
-2.67 Result
(dBuV/m) Limit
(dBuV/m)
-
74.00 109.96 57.58 Margin
(dB)
-
-16.42 Remark peak peak This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 47 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11b High CH Band Edge Horizontal Average Temperature:
Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 2461.200 2487.700 109.61 52.74 Correct Factor
(dB/m)
-2.76
-2.67 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark
-
54.00
-
-3.93 AVG AVG 106.85 50.07 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 48 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11g Low CH Band Edge Horizontal Peak Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 2387.280 2413.376 71.36 112.44 Correct Factor
(dB/m)
-2.99
-2.90 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark 74.00
-
-5.63
-
peak peak 68.37 109.54 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 49 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11g Low CH Band Edge Horizontal Average Temperature:
Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) 2390.000 2413.600 Reading
(dBuV) 52.52 102.48 Correct Factor
(dB/m)
-2.98
-2.90 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark 54.00
-
-4.46
-
AVG AVG 49.54 99.58 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 50 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11g High CH Band Edge Horizontal Peak Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 2460.700 2483.800 112.26 73.23 Correct Factor
(dB/m)
-2.76
-2.69 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark
-
74.00
-
-3.46 peak peak 109.50 70.54 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 51 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11g High CH Band Edge Horizontal Average Temperature:
Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 2460.000 2483.500 102.11 53.56 Correct Factor
(dB/m)
-2.76
-2.69 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark
-
54.00
-
-3.13 AVG AVG 99.35 50.87 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 52 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11n HT20 Low CH Band Edge Horizontal Peak Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 2385.936 2413.376 67.99 111.68 Correct Factor
(dB/m)
-2.99
-2.90 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark 74.00
-
-9.00
-
peak peak 65.00 108.78 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 53 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11n HT20 Low CH Band Edge Horizontal Average Temperature:
Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 2390.000 2410.912 51.09 101.37 Correct Factor
(dB/m)
-2.98
-2.92 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark 54.00
-
-5.89
-
AVG AVG 48.11 98.45 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 54 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11n HT20 High CH Band Edge Horizontal Peak Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 2462.200 2483.700 112.54 72.83 Correct Factor
(dB/m)
-2.76
-2.69 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark
-
74.00
-
-3.86 peak peak 109.78 70.14 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 55 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11n HT20 High CH Band Edge Horizontal Average Temperature:
Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 2463.400 2483.500 100.98 52.82 Correct Factor
(dB/m)
-2.75
-2.69 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark
-
54.00
-
-3.87 AVG AVG 98.23 50.13 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 56 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Below 1G Test Data Test Mode Test Item Polarize Detector Mode 1 30MHz-1GHz Vertical Peak Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 10, 2017 Jerry Chuang 120Vac / 60Hz Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) Remark Frequency
(MHz) Reading
(dBuV) 167.7400 240.4900 431.5800 455.8300 527.6100 600.3600 peak peak peak peak peak peak Note: No emission found between lowest internal used/generated frequency to 30MHz(9KHz~30MHz)
-11.85
-14.29
-6.18
-8.62
-6.20
-11.86 48.06 47.83 50.07 46.86 47.77 41.06 31.65 31.71 39.82 37.38 39.80 34.14 43.50 46.00 46.00 46.00 46.00 46.00 Correct Factor
(dB/m)
-16.41
-16.12
-10.25
-9.48
-7.97
-6.92 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 57 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 10, 2017 Jerry Chuang 120Vac / 60Hz Test Mode Test Item Polarize Detector Mode 1 30MHz-1GHz Vertical Peak Frequency
(MHz) Reading
(dBuV) 167.7400 431.5800 455.8300 614.9100 623.6400 689.6000 53.07 52.17 50.17 37.52 44.90 43.68 Correct Factor
(dB/m)
-16.41
-10.25
-9.48
-6.52
-6.27
-5.02 Result
(dBuV/m) Limit
(dBuV/m) 36.66 41.92 40.69 31.00 38.63 38.66 43.50 46.00 46.00 46.00 46.00 46.00 Margin
(dB
-6.84
-4.08
-5.31
-15.00
-7.37
-7.34 Note: No emission found between lowest internal used/generated frequency to 30MHz(9KHz~30MHz) Remark QP QP QP peak peak peak This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 58 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Above 1G Test Data Test Mode Test Item Polarize Detector IEEE 802.11b Low CH Harmonic Vertical Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 4827.000 44.25 Correct Factor
(dB/m) 4.38 Result
(dBuV/m) Limit
(dBuV/m) 48.63 74.00 Margin
(dB)
-25.37 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 59 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11b Low CH Harmonic Horizontal Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 7235.000 39.47 Correct Factor
(dB/m) 10.40 Result
(dBuV/m) Limit
(dBuV/m) 49.87 74.00 Margin
(dB)
-24.13 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 60 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11b Mid CH Harmonic Vertical Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 4876.000 4876.000 N/A 48.17 44.06 Correct Factor
(dB/m) 4.47 4.47 Result
(dBuV/m) Limit
(dBuV/m) 52.64 48.53 74.00 54.00 Margin
(dB)
-21.36
-5.47 Remark peak AVG Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 61 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11b Mid CH Harmonic Horizontal Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 7305.000 7305.000 N/A 45.22 38.91 Correct Factor
(dB/m) 10.44 10.44 Result
(dBuV/m) Limit
(dBuV/m) 55.66 49.35 74.00 54.00 Margin
(dB)
-18.34
-4.65 Remark peak AVG Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 62 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11b High CH Harmonic Vertical Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 10, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 4925.000 45.84 Correct Factor
(dB/m) 7.09 Result
(dBuV/m) Limit
(dBuV/m) 52.93 74.00 Margin
(dB)
-21.07 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 63 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11b High CH Harmonic Horizontal Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 10, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 4925.000 46.02 Correct Factor
(dB/m) 7.09 Result
(dBuV/m) Limit
(dBuV/m) 53.11 74.00 Margin
(dB
-20.89 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 64 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11g Low CH Harmonic Vertical Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 4827.000 39.99 Correct Factor
(dB/m) 4.38 Result
(dBuV/m) Limit
(dBuV/m) 44.37 74.00 Margin
(dB)
-29.63 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 65 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11g Low CH Harmonic Horizontal Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 5751.000 44.32 Correct Factor
(dB/m) 6.58 Result
(dBuV/m) Limit
(dBuV/m) 50.90 74.00 Margin
(dB)
-23.10 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 66 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11g Mid CH Harmonic Vertical Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 7312.000 39.00 Correct Factor
(dB/m) 10.44 Result
(dBuV/m) Limit
(dBuV/m) 49.44 74.00 Margin
(dB)
-24.56 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 67 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11g Mid CH Harmonic Horizontal Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 7305.000 7305.000 N/A Remark:
41.81 31.68 Correct Factor
(dB/m) 10.44 10.44 Result
(dBuV/m) Limit
(dBuV/m) 52.25 42.12 74.00 54.00 Margin
( B)
-21.75
-11.88 Remark peak AVG 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 68 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11g High CH Harmonic Vertical Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 10, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 4925.000 39.82 Correct Factor
(dB/m) 7.09 Result
(dBuV/m) Limit
(dBuV/m) 46.91 74.00 Margin
(dB)
-27.09 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 69 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11g High CH Harmonic Horizontal Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 10, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 4925.000 42.57 Correct Factor
(dB/m) 7.09 Result
(dBuV/m) Limit
(dBuV/m) 49.66 74.00 Margin
(dB
-24.34 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 70 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11n HT20 Low CH Harmonic Vertical Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 10, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 4827.000 37.27 Correct Factor
(dB/m) 6.84 Result
(dBuV/m) Limit
(dBuV/m) 44.11 74.00 Margin
(dB)
-29.89 R mark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 71 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11n HT20 Low CH Harmonic Horizontal Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 10, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 4820.000 36.40 Correct Factor
(dB/m) 6.82 Result
(dBuV/m) Limit
(dBuV/m) 43.22 74.00 Margin
(dB)
-30.78 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 72 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11n HT20 Mid CH Harmonic Vertical Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 7312.000 40.49 Correct Factor
(dB/m) 10.44 Result
(dBuV/m) Limit
(dBuV/m) 50.93 74.00 Margin
(dB)
-23.07 R mark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 73 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11n HT20 Mid CH Harmonic Horizontal Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 29, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 7312.000 7312.000 N/A 42.77 32.62 Correct Factor
(dB/m) 10.44 10.44 Result
(dBuV/m) Limit
(dBuV/m) 53.21 43.06 74.00 54.00 Margin
(dB)
-20.79
-10.94 Remark peak AVG Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 74 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11n HT20 High CH Harmonic Vertical Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 10, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 7386.000 36.39 Correct Factor
(dB/m) 13.90 Result
(dBuV/m) Limit
(dBuV/m) 50.29 74.00 Margin
(dB)
-23.71 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 75 / 79 Rev.02 Compliance Certification Services Inc. FCC ID: P27DBC835 Report No.: T170922D02-RP Test Mode Test Item Polarize Detector IEEE 802.11n HT20 High CH Harmonic Horizontal Peak and Average Temp/Hum Test Date Test Engineer Test Voltage 24()/ 33%RH November 10, 2017 Jerry Chuang 120Vac / 60Hz Frequency
(MHz) Reading
(dBuV) 7386.000 35.67 Correct Factor
(dB/m) 13.90 Result
(dBuV/m) Limit
(dBuV/m) 49.57 74.00 Margin
(dB)
-24.43 Remark peak N/A Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. For above 1GHz,the EUT peak value was under average limit, therefore the Average value compliance with the average limit This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 76 / 79 Rev.02
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-12-18 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-12-18
|
||||
1 | Applicant's complete, legal business name |
Sercomm Corporation
|
||||
1 | FCC Registration Number (FRN) |
0015548027
|
||||
1 | Physical Address |
8F, No. 3-1, YuanQu St, NanKang
|
||||
1 |
Taipei
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
u******@sgs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
P27
|
||||
1 | Equipment Product Code |
DBC835
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
N****** W******
|
||||
1 | Title |
Engineer
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
N******@SERCOMM.COM
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Compliance Certification Services Inc
|
||||
1 | Name |
M****** S******
|
||||
1 | Physical Address |
No. 11, Wugong 6th Rd., Wugu District
|
||||
1 |
New Taipei City, 24891
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
+886 ********
|
||||
1 | Fax Number |
886 2********
|
||||
1 |
m******@ccsrf.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Compliance Certification Services Inc
|
||||
1 | Name |
M******** S********
|
||||
1 | Physical Address |
No. 11, Wugong 6th Rd., Wugu District
|
||||
1 |
New Taipei City, 24891
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
+886 ********
|
||||
1 | Fax Number |
886 2********
|
||||
1 |
m******@ccsrf.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/16/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless HD DoorBell Camera | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Compliance Certification Services Inc. Wugu Lab.
|
||||
1 | Name |
H******** L********
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
h******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.2877000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC