all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 214.28 KiB | November 19 2013 | |||
1 2 |
|
Internal Photos | Internal Photos | 1.17 MiB | November 19 2013 | |||
1 2 |
|
External Photos | External Photos | 150.46 KiB | November 19 2013 | |||
1 2 |
|
Label and Location | ID Label/Location Info | 1.41 MiB | November 19 2013 | |||
1 2 |
|
Cover Letter (Agent Authorization) | Cover Letter(s) | 96.51 KiB | February 24 2014 | |||
1 2 |
|
Cover Letter (Description of Change) rev | Cover Letter(s) | 72.33 KiB | February 24 2014 | |||
1 2 |
|
Cover Letter (Previous Grant) | Cover Letter(s) | 67.77 KiB | February 24 2014 | |||
1 2 |
|
RF Exposure Info (MPE) | RF Exposure Info | 59.01 KiB | February 24 2014 | |||
1 2 |
|
Test Report | Test Report | 279.66 KiB | February 24 2014 | |||
1 2 |
|
Test Setup Photos | Test Setup Photos | 85.16 KiB | February 24 2014 | |||
1 2 |
|
Attestation (Channel and Mode Declaration) | Attestation Statements | 108.87 KiB | November 19 2013 | |||
1 2 | Block Diagram | Block Diagram | November 19 2013 | confidential | ||||
1 2 |
|
Confidentiality Request | Cover Letter(s) | 112.10 KiB | November 19 2013 | |||
1 2 |
|
Operational Description | Operational Description | 7.32 KiB | November 19 2013 | |||
1 2 | Schematics | Schematics | November 19 2013 | confidential |
1 2 | User Manual | Users Manual | 214.28 KiB | November 19 2013 |
SZ-SRN02-SA ZigBee Safeawake Siren Repeater Installation Guide The SZ-SRN02-SA indoor Safeawake Siren Repeater can function as an alarm siren and work with the existing traditional smoke alarm to provide more protection. When a smoke alarm sends out a 0.5 second T3 pattern, the SZ-SRN02-SA will hear and be triggered instantly. Furthermore, this device extends the range of your Home Security system's wireless network to ensure that signals from the other devices reach the coordinator 2.4GHz CR123A x 2 Open Air: 150M (Max.) 100 - 240VAC 0 C to 50 C (32 - 122F)
-20 C to 70 C (-4 - 158F) 24 Hours At least 85 dB at 3 meters 126mm x 80mm x 39mm (4.96" x 3.15" x 1.54") Specification Frequency Batter Type RF Communication Range Power Source Operating Temperature Storage Temperature Backup Battery Life Internal Sounder Output Dimension Package Contents 1 Intallation Pre-Intallation 1. Remove the battery cover of the device. 2. Install the supplied two CR123A batteries correctly. Note: For safety reason, please replace the backup CR123A batteries after the siren has been triggered (except self-testing). Operation Power Status LED
(Green/Amber) On (Green) - AC power mode. On (Amber) - DC battery mode. Blinking (Amber) - Low battery mode. 2 1. Join Function For "Join" a network, please do the following instruction:
Set the ZigBee Coordinator into Permit-Joining mode. Press the Join/Leave button for less than 1 second. The Join/Leave LED is blinking while processing. If the siren has been joined with the coordinator successfully, the Join/Leave LED will be on for 2 seconds and then off. The Join/Leave LED will be off instantly if failed. 2. Leave Function For "Leave" a network, please do the following instruction:
Press Join/Leave button for 3 seconds to let the siren disassociate from the coordinator. The Join/Leave LED will be on for 1 second and then off. 3. Test Function Remove the battery cover before testing. Press the Test button for 3 seconds. When pressing the Test button, the device will generate low level sounds and flash light to indicate that the siren is serviceable. Note:
The Join/Leave LED will stay off during the normal operation. The siren is equipped with a tamper switch. If the device is removed, the siren will send an alarm message to the ZigBee coordinator. For safety reason, please replace the backup CR123A batteries after the siren has been triggered (except self-testing). Procedure 1. Remove the screw of the outlets cover plate. Plug the device into the 110V outlet. Note: Make sure that the outlet is not controlled by a wall switch. 2. Tighten the device to the outlet with the supplied screw. The supplied washer can be used as a spacer between the screw and the outlet, if required. 3 Repeater Setup The siren can also be used as a repeater that lets you extend the security range of your home. When using the device as a repeater, just locate it in a suitable place, which has average signal strength and is at the halfway between the coordinator and the furthest sensor. The repeater can even boost signals weakened by walls and other obstructions. 4 Increase the separation between the equipment and receiver. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 5
1 2 | Internal Photos | Internal Photos | 1.17 MiB | November 19 2013 |
Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8
1 2 | Cover Letter (Agent Authorization) | Cover Letter(s) | 96.51 KiB | February 24 2014 |
Date:2014/01/10 AuthorizationLetter Towhomitmayconcern:
We,theundersignedSercommCorp.herebyauthorizeBureauVeritasConsumer ProductsServices(H.K.)Ltd.,TaoyuanBranch(BVCPSTaoyuan)ofTaiwantoactonourbehalfin allmattersrelatingtoallprocessesrequiredinFCCApprovalandanycommunicationneededwith thenationalauthority. AnyandallactscarriedoutbyBVCPSTaoyuanonourbehalfshallhave thesameeffectsasactsofourown. Ifyouhaveanyquestionsregardingtheauthorization,pleasedonthesitatetocontactus. Thankyou!
Sincerelyyours, Jan.,102014 SercommCorporation AngusChang/Manager TEL:886226553988*2598 FAX:886226553965 Email:angus_chang@sercomm.com
1 2 | Cover Letter (Description of Change) rev | Cover Letter(s) | 72.33 KiB | February 24 2014 |
FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 SUBJECT:ClassIIPermissiveChangeforFCCID:P27SZSRN02SA Theproduct,ZigBeeEnergySwitch,hasbeengrantedbyFCCdated11/19/2013, FCCID:P27SZSRN02SA. Nowwe,SercommCorporation,wouldliketomodifytheauthorizedequipmentforbelow changes:
AddadditionCH25testdata,sinceoriginalhighchannel26,hasverylowoutputpowerdue tooutofbandemissionlimitation,wewanttoshowpermittedoutputpoweronnext channel25. Exceptforthechangeabove,noothermodificationisperformed.Also,thechangedoesnothave anyimpactontheapprovedradioparametersuchpower,frequency,rangemodulationetc. WewouldliketocertifytheadditionalofcertifiedFCCID:P27SZSRN02SAasaClassIIPermissive Changeinthisdevice. SercommCorporation AngusChang/Manager TEL:886226553988*2598 FAX:886226553965 Email:angus_chang@sercomm.com
1 2 | Cover Letter (Previous Grant) | Cover Letter(s) | 67.77 KiB | February 24 2014 |
GRANT OF EQUIPMENT AUTHORIZATION Certification Issued Under the Authority of the Federal Communications Commission By:
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 Date of Grant: 11/19/2013 Application Dated: 11/19/2013 SerComm Corporation 8F, No. 3-1, YuanQu St, NanKang Taipei 115, 115 Taiwan Attention: Angus Chang , R&D Division NOT TRANSFERABLE EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. FCC IDENTIFIER: P27SZSRN02SA Name of Grantee: SerComm Corporation Equipment Class: Digital Transmission System Notes:
ZigBee Safeawake Siren Repeater Grant Notes FCC Rule Parts 15C Frequency Range (MHZ) 2405.0 - 2480.0 Output Watts 0.091 Frequency Tolerance Emission Designator Power listed is conducted. End users and installers must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines.
1 2 | RF Exposure Info (MPE) | RF Exposure Info | 59.01 KiB | February 24 2014 |
RF EXPOSURE REPORT REPORT NO.: SA131029D16 MODEL NO.: SZ-SRN02xxxxxxxx, SZ-SRN02-SA FCC ID: P27SZSRN02SA RECEIVED: Oct. 29, 2013 TESTED: Oct. 31 ~ Nov. 1, 2013 ISSUED: Nov. 6, 2013 APPLICANT: SerComm Corp. ADDRESS: 8F,No.3-1,YuangQu St.,NanKang,Taipei 115,Taiwan ,R.O.C.(NanKang Software Park) ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA131029D16 1 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................. 3 CERTIFICATION ........................................................................................... 4 1. RF EXPOSURE LIMIT ................................................................................... 5 2. 3. MPE CALCULATION FORMULA .................................................................. 5 CLASSIFICATION ......................................................................................... 5 4. 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................ 6 Report No.: SA131029D16 2 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. SA131029D16 REASON FOR CHANGE Original release DATE ISSUED Nov. 6, 2013 Report No.: SA131029D16 3 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: ZigBee Safeawake Siren Repeater MODEL NO.: SZ-SRN02xxxxxxxx, SZ-SRN02-SA BRAND NAME:
(The x in model name can be 0 to 9, A to Z, blank or purpose) Sercomm, iControl, Comcast, Time Warner Cable, Cox, Rogers, Brighthouse, Comporium, Rock Hill
- for marking APPLICANT: SerComm Corp. TESTED: Oct. 31 ~ Nov. 1, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model no.: SZ-SRN02-SA) has been tested by Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample characteristics under the conditions specified in this report. Bureau and found s EMC PREPARED BY APPROVED BY
:
:
( Celia Chen / Senior Specialist )
, DATE: Nov. 6, 2013
( Rex Lai / Assistant Manager )
, DATE: Nov. 6, 2013 Report No.: SA131029D16 4 of 6 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY
(mW/cm2) AVERAGE TIME
(minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 1500-100,000 F = Frequency in MHz F/1500 1.0 30 30 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA131029D16 5 of 6 Report Format Version 5.0.0 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND
(MHz) MAX POWER
(dBm) 2405-2480 19.61 ANTENNA GAIN
(dBi) 1.56 DISTANCE
(cm) 20 POWER DENSITY
(mW/cm2) 0.0260 LIMIT
(mW/cm2) 1.00
--- END ---
Report No.: SA131029D16 6 of 6 Report Format Version 5.0.0
1 2 | Test Report | Test Report | 279.66 KiB | February 24 2014 |
FCC TEST REPORT REPORT NO.: RF131029D16A MODEL NO.: SZ-SRN02xxxxxxxx multiple listing see item 3.1 FCC ID: P27SZSRN02SA RECEIVED: Dec. 6, 2013 TESTED: Dec. 6 ~23, 2013 ISSUED: Dec. 26, 2013 APPLICANT: Sercomm Corp. ADDRESS: 8F,No.3-1,YuangQu St.,NanKang,Taipei 115,Taiwan ,R.O.C.(NanKang Software Park) ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF131029D16A Reference No.: 131210D05 1 of 34 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................ 4 CERTIFICATION .......................................................................................... 5 1. 2. SUMMARY OF TEST RESULTS ................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ............................................................... 6 3. GENERAL INFORMATION .......................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................ 7 3.2 DESCRIPTION OF TEST MODES .............................................................. 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............... 9 3.3 DUTY CYCLE OF TEST SIGNAL ............................................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS ...................................................... 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................ 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................ 13 4. TEST TYPES AND RESULTS ................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .. 14 4.1.2 TEST INSTRUMENTS ............................................................................... 15 4.1.3 TEST PROCEDURES ............................................................................... 16 4.1.4 DEVIATION FROM TEST STANDARD ...................................................... 16 4.1.5 TEST SETUP ............................................................................................. 17 4.1.6 EUT OPERATING CONDITIONS .............................................................. 17 4.1.7 TEST RESULTS ........................................................................................ 18 4.2 6dB BANDWIDTH MEASUREMENT ......................................................... 23 4.2.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ...................................... 23 4.2.2 TEST SETUP ............................................................................................. 23 4.2.3 TEST INSTRUMENTS ............................................................................... 23 4.2.4 TEST PROCEDURE .................................................................................. 23 4.2.5 DEVIATION FROM TEST STANDARD ...................................................... 23 4.2.6 EUT OPERATING CONDITIONS .............................................................. 23 4.2.7 TEST RESULTS ........................................................................................ 24 4.3 CONDUCTED OUTPUT POWER .............................................................. 25 4.3.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ............... 25 4.3.2 TEST SETUP ............................................................................................. 25 4.3.3 TEST INSTRUMENTS ............................................................................... 25 4.3.4 TEST PROCEDURES ............................................................................... 25 4.3.5 DEVIATION FROM TEST STANDARD ...................................................... 25 4.3.6 EUT OPERATING CONDITIONS .............................................................. 25 4.3.7 TEST RESULTS ........................................................................................ 26 4.4 POWER SPECTRAL DENSITY MEASUREMENT .................................... 27 4.4.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT .................. 27 4.4.2 TEST SETUP ............................................................................................. 27 4.4.3 TEST INSTRUMENTS ............................................................................... 27 4.4.4 TEST PROCEDURE .................................................................................. 27 4.4.5 DEVIATION FROM TEST STANDARD ...................................................... 27 4.4.6 EUT OPERATING CONDITION ................................................................. 27 4.4.7 TEST RESULTS ........................................................................................ 28 Report No.: RF131029D16A Reference No.: 131210D05 2 of 34 Report Format Version 5.2.0 4.5 CONDUCTED OUT OF BAND EMISSION MEASUREMENT ................... 29 4.5.1 LIMITS OF CONDUCTED OUT OF BAND EMISSION MEASUREMENT . 29 4.5.2 TEST SETUP ............................................................................................. 29 4.5.3 TEST INSTRUMENTS ............................................................................... 29 4.5.4 TEST PROCEDURE .................................................................................. 29 4.5.5 DEVIATION FROM TEST STANDARD ...................................................... 30 4.5.6 EUT OPERATING CONDITION ................................................................. 30 4.5.7 TEST RESULTS ........................................................................................ 30 PHOTOGRAPHS OF THE TEST CONFIGURATION ................................ 32 5. 6. INFORMATION ON THE TESTING LABORATORIES ............................... 33 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING 7. CHANGES TO THE EUT BY THE LAB ..................................................... 34 Report No.: RF131029D16A Reference No.: 131210D05 3 of 34 Report Format Version 5.2.0 RELEASE CONTROL RECORD REASON FOR CHANGE ISSUE NO. RF131029D16A Original release DATE ISSUED Dec. 26, 2013 Report No.: RF131029D16A Reference No.: 131210D05 4 of 34 Report Format Version 5.2.0 1. CERTIFICATION PRODUCT: ZigBee Safeawake Siren Repeater MODEL NO.: SZ-SRN02xxxxxxxx
(x = 0 to 9, A to Z, blank or - for marking purpose) BRAND: Sercomm, iControl, Comcast, Time Warner Cable, Cox, Rogers, Brighthouse, Comporium, Rock Hill APPLICANT: Sercomm Corp. TESTED: Dec. 6 ~23, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.247) ANSI C63.10-2009 The above equipment (model: CSZ-SRN02-SA) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the samples EMC characteristics under the conditions specified in this report. PREPARED BY APPROVED BY
:
:
( Annie Chang / Supervisor )
, DATE: Dec. 26, 2013
( Rex Lai / Assistant Manager )
, DATE: Dec. 26, 2013 Report No.: RF131029D16A Reference No.: 131210D05 5 of 34 Report Format Version 5.2.0 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:
APPLIED STANDARD: FCC PART 15, SUBPART C (SECTION 15.247) STANDARD SECTION TEST TYPE RESULT REMARK 15.207 15.247(d) 15.209 15.247(d) 15.247(a)(2) 15.247(b) 15.247(e) 15.203 AC Power Conducted Emission NA Refer to NOTE below Radiated Emissions PASS Meet the requirement of limit. Minimum passing margin is
-1.1dB at 2483.50MHz. Band Edge Measurement 6dB bandwidth Conducted power Power Spectral Density Antenna Requirement PASS Meet the requirement of limit. PASS Meet the requirement of limit. PASS Meet the requirement of limit. PASS Meet the requirement of limit. PASS No antenna connector is used. NOTE: No need to retest the test item due to the change should not influence test result. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
MEASUREMENT Radiated emissions FREQUENCY 30MHz ~ 1GHz Above 1GHz UNCERTAINTY 4.00 dB 3.36 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k = 2. Report No.: RF131029D16A Reference No.: 131210D05 6 of 34 Report Format Version 5.2.0 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT MODEL NO. POWER SUPPLY ZigBee Safeawake Siren Repeater SZ-SRN02xxxxxxxx multiple listing see Note 120Vac, 0.5A, 60Hz DC6V, 0.5A (Battery Type:CR123A x 2) O-QPSK MODULATION TYPE MODULATION TECHNOLOGY DSSS TRANSFER RATE OPERATING FREQUENCY NUMBER OF CHANNEL OUTPUT POWER ANTENNA TYPE ANTENNA CONNECTOR DATA CABLE I/O PORTS ACCESSORY DEVICES Note:
1. This report is a supplementary report of the original one (BV CPS report no.:
250kbps 2405MHz ~ 2480MHz 16 17.7mW PCB antenna with 1.56dBi gain N/A N/A Refer to users manual N/A RF131029D16) issued on Nov. 6, 2013 to verify test result for some electronic and mechanical changes. The main change is addition CH25 test data, since original high channel 26, has very low output power due to out of band emission limitation, we want to show permitted output power on next channel 25. 2. The x in model name can be 0 to 9, A to Z, blank or - for marking purpose. During the test, model no.: SZ-SRN02-SA was selected as the representative one for the test and only its test data was recorded in this report. 3. The EUT was power supplied from the following AC power or battery:
Rating 120Vac, 0.5A, 60Hz 6Vdc, 0.5A (Battery Type:CR123A x 2) Item AC power Battery After pre-tested above power source, the AC power was the worst case, therefore, only its test data was recorded in this report. 4. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF131029D16A Reference No.: 131210D05 7 of 34 Report Format Version 5.2.0 3.2 DESCRIPTION OF TEST MODES 16 channels are listed as below:
CHANNEL FREQUENCY CHANNEL FREQUENCY 11 12 13 14 15 16 17 18 2405MHz 2410MHz 2415MHz 2420MHz 2425MHz 2430MHz 2435MHz 2440MHz 19 20 21 22 23 24 25 26 2445MHz 2450MHz 2455MHz 2460MHz 2465MHz 2470MHz 2475MHz 2480MHz Report No.: RF131029D16A Reference No.: 131210D05 8 of 34 Report Format Version 5.2.0 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT CONFIGURE MODE APPLICABLE TO RE1G RE<1G PLC APCM OB DESCRIPTION NOTE
-
Where NOTE: No need to retest the test item due to the change should not influence test result. NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on RE1G: Radiated Emission above 1GHz PLC: Power Line Conducted Emission OB: Conducted Out-Band Emission Measurement RE<1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement
-
X-plane. RADIATED EMISSION TEST (ABOVE 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE
-
AVAILABLE CHANNEL TESTED CHANNEL 11 to 26 11, 18, 25, 26 MODULATION TYPE O-QPSK RADIATED EMISSION TEST (BELOW 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE
-
AVAILABLE CHANNEL 11 to 26 TESTED CHANNEL 25 MODULATION TYPE O-QPSK CONDUCTED OUT-BAND EMISSION MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE
-
AVAILABLE CHANNEL 11 to 26 TESTED CHANNEL 25 MODULATION TYPE O-QPSK Report No.: RF131029D16A Reference No.: 131210D05 9 of 34 Report Format Version 5.2.0 ANTENNA PORT CONDUCTED MEASUREMENT:
This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE
-
AVAILABLE CHANNEL 11 to 26 TESTED CHANNEL 25 MODULATION TYPE O-QPSK TEST CONDITION:
APPLICABLE TO RE1G RE<1G OB APCM ENVIRONMENTAL CONDITIONS 21deg. C, 75%RH 21deg. C, 75%RH 25deg. C, 60%RH 25deg. C, 60%RH INPUT POWER TESTED BY 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz Joey Liu Joey Liu Dalen Dai Dalen Dai Report No.: RF131029D16A Reference No.: 131210D05 10 of 34 Report Format Version 5.2.0 3.3 DUTY CYCLE OF TEST SIGNAL Duty cycle of test signal is 100 %
Report No.: RF131029D16A Reference No.: 131210D05 11 of 34 Report Format Version 5.2.0 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together without other necessary accessories or support unit. 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST
(Power from AC Power)
*Test Table EUT Report No.: RF131029D16A Reference No.: 131210D05 12 of 34 Report Format Version 5.2.0 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart C (15.247) ANSI C63.10-2009 558074 D01 DTS Meas Guidance v03r01 All test items have been performed and recorded as per the above standards. Report No.: RF131029D16A Reference No.: 131210D05 13 of 34 Report Format Version 5.2.0 4. TEST TYPES AND RESULTS 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:
FREQUENCIES
(MHz) FIELD STRENGTH
(microvolts/meter) MEASUREMENT DISTANCE
(meters) 0.009 ~ 0.490 0.490 ~ 1.705 1.705 ~ 30.0 30 ~ 88 88 ~ 216 216 ~ 960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF131029D16A Reference No.: 131210D05 14 of 34 Report Format Version 5.2.0 4.1.2 TEST INSTRUMENTS CALIBRATED UNTIL Feb. 26, 2013 Feb. 25, 2014 Feb. 26, 2013 Feb. 25, 2014 Jan. 03, 2013 Jan. 02, 2014 Mar. 20, 2013 Mar. 19, 2014 May 29, 2013 May 28, 2014 Aug. 16, 2013 Aug. 15, 2014 May 13, 2013 May 12, 2014 DATE 7.6.15.9.2 NA NA NA MODEL NO. TT100 AT100 ADT_Radiated_V VULB 9168 VHBA 9123 8447D 8449B N9038A 137 480 0306 0306 NA SERIAL NO. CALIBRATED 2432A03504 3008A01201 MY51210129 DESCRIPTION &
MANUFACTURER HP Preamplifier HP Preamplifier Agilent TEST RECEIVER Schwarzbeck Antenna Schwarzbeck Antenna ADT. Turn Table ADT. Tower Software SUHNER RF cable Schwarzbeck Horn Antenna Highpass filter Wainwright Instruments ROHDE & SCHWARZ Spectrum Analyzer Anritsu Power Sensor Anritsu Power Meter NOTE: 1. The calibration interval of the above test instruments is 12/24 months. And the BBHA 9120-D1 3.1/18G-10SS CABLE-CH6 MA2411B ML2495A 0842014 0738404 100036 FSP 40 SF102 D130 WHK SN 8 NA calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. 4. The Industry Canada Reference No. IC 7450E-6. 5. The FCC Site Registration No. is 447212. May. 17, 2013 May. 16, 2014 Apr. 24, 2013 Apr. 23, 2014 Apr. 25, 2013 Apr. 24, 2014 NA NA NA NA Report No.: RF131029D16A Reference No.: 131210D05 15 of 34 Report Format Version 5.2.0 4.1.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meters semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 100kHz and video bandwidth is 300kHz for Peak detection at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 1kHz for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF131029D16A Reference No.: 131210D05 16 of 34 Report Format Version 5.2.0 4.1.5 TEST SETUP For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT OPERATING CONDITIONS a. Placed the EUT on the testing table. b. Set the EUT under transmitting condition. Report No.: RF131029D16A Reference No.: 131210D05 17 of 34 Report Format Version 5.2.0 4.1.7 TEST RESULTS BELOW 1GHz WORST-CASE DATA CHANNEL TX Channel 25 FREQUENCY RANGE 30MHz ~ 1GHz DETECTOR FUNCTION Quasi-Peak (QP) CORRECTION FACTOR
(dB/m)
-13.32
-13.51
-9.95
-8.30
-4.27
-2.60 CORRECTION NO. 1 2 3 4 5 6 FREQ.
(MHz) 144.51 250.04 375.03 450.01 665.45 750.03 NO. FREQ.
(MHz)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT 320 95 315 360 278 258 TABLE ANGLE
(Degree)
-7.7
-7.5
-8.5
-9.1
-8.4
-9.2 43.5 46.0 46.0 46.0 46.0 46.0
(m) 1.38 H 1.45 H 1.87 H 1.27 H 1.58 H 1.67 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 35.8 QP 49.08 38.5 QP 52.03 37.5 QP 47.42 36.9 QP 45.20 37.7 QP 41.92 36.8 QP 39.43 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 44.52 49.28 47.14 44.81 41.56 38.73 LEVEL
(dBuV/m) 31.1 QP 36.3 QP 37.2 QP 38.2 QP 37.3 QP 37.2 QP
(m) 1.37 V 1.18 V 1.78 V 1.54 V 1.49 V 1.67 V TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) 1 2 3 4 5 6
-8.9
-7.3
-8.8
-7.8
-8.8
-8.8 40.0 43.5 46.0 46.0 46.0 46.0 44.36 150.96 375.03 550.07 662.15 830.49 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 311 294 268 172 210 51 FACTOR
(dB/m)
-13.41
-13.03
-9.95
-6.63
-4.31
-1.50 Report No.: RF131029D16A Reference No.: 131210D05 18 of 34 Report Format Version 5.2.0 ABOVE 1GHz DATA CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m)
-3.75
-3.75
-3.67
-3.67 3.72 3.72 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2405.00
*2405.00 4810.00 4810.00 NO. FREQ.
(MHz)
(dB) MARGIN 74.0 54.0 74.0 54.0
-12.0
-5.3 LIMIT
(dBuV/m) ANTENNA HEIGHT 277 277 277 277 281 281 TABLE ANGLE
(Degree)
(m) 1.58 H 1.58 H 1.58 H 1.58 H 1.58 H 1.58 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 62.0 PK 65.78 48.7 AV 52.49 114.5 PK 118.20 112.1 AV 115.78 47.6 PK 43.83 37.1 AV 33.41 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 63.54 48.45 112.91 110.58 38.54 26.62 LEVEL
(dBuV/m) 59.8 PK 44.7 AV 109.2 PK 106.9 AV 42.3 PK 30.3 AV
(m) 1.02 V 1.02 V 1.02 V 1.02 V 1.02 V 1.02 V TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m)
-26.5
-16.9
-14.2
-9.3 74.0 54.0 MARGIN
(dB) 74.0 54.0 1 2 3 4 5 6 2390.00 2390.00
*2405.00
*2405.00 4810.00 4810.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 8 8 8 8 13 13
-31.7
-23.7 FACTOR
(dB/m)
-3.75
-3.75
-3.67
-3.67 3.72 3.72 Report No.: RF131029D16A Reference No.: 131210D05 19 of 34 Report Format Version 5.2.0 CHANNEL TX Channel 18 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ.
(MHz) 1 2 3 4
*2440.00
*2440.00 4880.00 4880.00 NO. FREQ.
(MHz)
(dB) MARGIN 74.0 54.0 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 1.55 H 1.55 H 1.55 H 1.55 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 116.1 PK 119.58 113.9 AV 117.40 49.6 PK 45.83 39.3 AV 35.54 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 113.87 111.67 40.23 28.37 LEVEL
(dBuV/m) 110.4 PK 108.2 AV 44.0 PK 32.1 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) 272 272 274 274
-24.4
-14.7 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-3.52
-3.52 3.75 3.75 CORRECTION FACTOR
(dB/m)
-3.52
-3.52 3.75 3.75 1 2 3 4 74.0 54.0
*2440.00
*2440.00 4880.00 4880.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6 6 15 15
-30.0
-21.9 Report No.: RF131029D16A Reference No.: 131210D05 20 of 34 Report Format Version 5.2.0 CHANNEL TX Channel 25 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m)
-3.36
-3.36
-3.32
-3.32 3.71 3.71 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6
*2475.00
*2475.00 2483.50 2483.50 4950.00 4950.00 NO. FREQ.
(MHz)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-9.1
-1.1
-30.7
-22.4 297 297 297 297 299 299 TABLE ANGLE
(Degree)
(m) 1.52 H 1.52 H 1.52 H 1.52 H 1.54 H 1.54 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 109.3 PK 112.69 107.1 AV 110.45 64.9 PK 68.21 52.9 AV 56.18 43.4 PK 39.64 31.6 AV 27.89 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 107.25 104.81 63.33 51.23 38.94 25.61 LEVEL
(dBuV/m) 103.9 PK 101.5 AV 60.0 PK 47.9 AV 42.7 PK 29.3 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) 1 2 3 4 5 6 74.0 54.0 74.0 54.0
*2475.00
*2475.00 2483.50 2483.50 4950.00 4950.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency.
-14.0
-6.1
-31.4
-24.7 6 6 6 6 7 7 FACTOR
(dB/m)
-3.36
-3.36
-3.32
-3.32 3.71 3.71 Report No.: RF131029D16A Reference No.: 131210D05 21 of 34 Report Format Version 5.2.0 CHANNEL TX Channel 26 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m)
-3.33
-3.33
-3.32
-3.32 3.70 3.70 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6
*2480.00
*2480.00 2483.50 2483.50 4960.00 4960.00 NO. FREQ.
(MHz)
(dB) MARGIN LIMIT
(dBuV/m) 87 87 87 87 86 86 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-10.3
-1.6
-31.7
-24.0 TABLE ANGLE
(Degree)
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 90.9 PK 94.22 88.5 AV 91.83 63.7 PK 67.02 52.4 AV 55.75 42.4 PK 38.65 30.0 AV 26.27 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 91.24 89.24 65.78 53.65 39.15 26.62 LEVEL
(dBuV/m) 87.9 PK 85.9 AV 62.5 PK 50.3 AV 42.9 PK 30.3 AV
(m) 1.02 V 1.02 V 1.02 V 1.02 V 1.00 V 1.00 V TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) 1 2 3 4 5 6 74.0 54.0 74.0 54.0
-11.5
-3.7
-31.2
-23.7
*2480.00
*2480.00 2483.50 2483.50 4960.00 4960.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 199 199 199 199 200 200 FACTOR
(dB/m)
-3.33
-3.33
-3.32
-3.32 3.70 3.70 Report No.: RF131029D16A Reference No.: 131210D05 22 of 34 Report Format Version 5.2.0 4.2 6dB BANDWIDTH MEASUREMENT 4.2.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.2.2 TEST SETUP EUT SPECTRUM ANALYZER 10dB ATTENUATION PAD 4.2.3 TEST INSTRUMENTS Refer to section 4.1.2 to get information of above instrument. 4.2.4 TEST PROCEDURE a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.2.5 DEVIATION FROM TEST STANDARD No deviation. 4.2.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF131029D16A Reference No.: 131210D05 23 of 34 Report Format Version 5.2.0 4.2.7 TEST RESULTS CHANNEL CHANNEL FREQUENCY
(MHz) 6dB BANDWIDTH
(MHz) MINIMUM LIMIT
(MHz) PASS / FAIL 25 2475 1.60 0.5 PASS SPECTRUM PLOT Report No.: RF131029D16A Reference No.: 131210D05 24 of 34 Report Format Version 5.2.0 4.3 CONDUCTED OUTPUT POWER 4.3.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT For systems using digital modulation in the 24002483.5 MHz bands: 1 Watt
(30dBm) 4.3.2 TEST SETUP EUT 10dB ATTENUATION PAD 4.3.3 TEST INSTRUMENTS Power Sensor Power Meter Refer to section 4.1.2 to get information of above instrument. 4.3.4 TEST PROCEDURES A peak / average power sensor were used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the peak power level. 4.3.5 DEVIATION FROM TEST STANDARD No deviation. 4.3.6 EUT OPERATING CONDITIONS Same as Item 4.2.6. Report No.: RF131029D16A Reference No.: 131210D05 25 of 34 Report Format Version 5.2.0 4.3.7 TEST RESULTS FOR PEAK POWER CHAN. 11 18 25 26 CHAN. FREQ.
(MHz) 2405 2440 2475 2480 FOR AVERAGE POWER POWER OUTPUT
(mW) POWER OUTPUT
(dBm) POWER LIMIT (dBm) PASS / FAIL 80.4 91.4 17.7 1.4 19.05 19.61 12.48 1.55 30 30 30 30 REMARK Original Approved Original Approved PASS PASS PASS Additional PASS Original Approved CHANNEL FREQUENCY (MHz) 11 18 25 26 2405 2440 2475 2480 AVERAGE POWER
(dBm) 18.96 19.51 12.36
-1.73 REMARK Original Approved Original Approved Additional Original Approved Report No.: RF131029D16A Reference No.: 131210D05 26 of 34 Report Format Version 5.2.0 4.4 POWER SPECTRAL DENSITY MEASUREMENT 4.4.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT The Maximum of Power Spectral Density Measurement is 8dBm. 4.4.2 TEST SETUP EUT 10dB ATTENUATION PAD SPECTRUM ANALYZER 4.4.3 TEST INSTRUMENTS Refer to section 4.1.2 to get information of above instrument. 4.4.4 TEST PROCEDURE a. Set the RBW = 3 kHz, VBW =10 kHz, Detector = peak. b. Sweep time = auto couple, Trace mode = max hold, allow trace to fully stabilize. c. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. 4.4.5 DEVIATION FROM TEST STANDARD No deviation. 4.4.6 EUT OPERATING CONDITION Same as Item 4.2.6 Report No.: RF131029D16A Reference No.: 131210D05 27 of 34 Report Format Version 5.2.0 4.4.7 TEST RESULTS Channel 25 Freq.
(MHz) 2475 PSD
(dBm/3kHz)
-2.78 Limit
(dBm/3kHz) 8 PASS
/FAIL PASS SPECTRUM PLOT Report No.: RF131029D16A Reference No.: 131210D05 28 of 34 Report Format Version 5.2.0 4.5 CONDUCTED OUT OF BAND EMISSION MEASUREMENT 4.5.1 LIMITS OF CONDUCTED OUT OF BAND EMISSION MEASUREMENT Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.5.2 TEST SETUP EUT 10dB ATTENUATION PAD SPECTRUM ANALYZER 4.5.3 TEST INSTRUMENTS Refer to section 4.1.2 to get information of above instrument. 4.5.4 TEST PROCEDURE MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Report No.: RF131029D16A Reference No.: 131210D05 29 of 34 Report Format Version 5.2.0 MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW 300 kHz. 3. Set span to encompass the spectrum to be examined. 4. Detector = peak. 5. Trace Mode = max hold. 6. Sweep = auto couple. 4.5.5 DEVIATION FROM TEST STANDARD No deviation. 4.5.6 EUT OPERATING CONDITION Same as Item 4.2.6 4.5.7 TEST RESULTS The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF131029D16A Reference No.: 131210D05 30 of 34 Report Format Version 5.2.0 CH 25 CH25 Band edge Report No.: RF131029D16A Reference No.: 131210D05 31 of 34 Report Format Version 5.2.0 5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF131029D16A Reference No.: 131210D05 32 of 34 Report Format Version 5.2.0 6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab Tel: 886-2-26052180 Fax: 886-2-26051924 Hwa Ya EMC/RF/Safety/Telecom Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. Hsin Chu EMC/RF Lab Tel: 886-3-5935343 Fax: 886-3-5935342 Report No.: RF131029D16A Reference No.: 131210D05 33 of 34 Report Format Version 5.2.0 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test.
---END---
Report No.: RF131029D16A Reference No.: 131210D05 34 of 34 Report Format Version 5.2.0
1 2 | Test Setup Photos | Test Setup Photos | 85.16 KiB | February 24 2014 |
PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST 1 of 1
1 2 | Attestation (Channel and Mode Declaration) | Attestation Statements | 108.87 KiB | November 19 2013 |
SerComm Corporation TaipeiOffice:8F,No.31,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886226553988FAX:886226553966 DeclarationfornononUSchanneloperation We,SerCommCorp.declarethatthedevicedoesnotsupportanynonUSchannelsinallthe Date:2013/11/07 operationalmode(s)forthefollowingproduct. FCCID:P27SZSRN02SA Ifyoushouldhaveanyquestion(s)regardingthisdeclaration,pleasedonthesitatetocontactus. Thankyou!
Nov., 07-2013 SerCommCorporation AngusChang/Manager TEL:886226553988*2598 FAX:886226553965 Email:angus_chang@sercomm.com
1 2 | Confidentiality Request | Cover Letter(s) | 112.10 KiB | November 19 2013 |
SerComm Corporation TaipeiOffice:8F,No.31,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886226553988FAX:886226553966 Date:2013/11/07 FCCID:P27SZSRN02SA FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequest PursuanttoSections0.457and0.459oftheCommissionsRules,theApplicantherebyrequests confidentialtreatmentofinformationaccompanyingthisApplicationasoutlinedbelow:
Schematics BlockDiagram Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.ThepublicdisclosureofthesemattersmightbeharmfultotheApplicantandprovide unjustifiedbenefitstoitscompetitors. TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisApplicationandall accompanyingdocumentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerely, Nov., 07-2013 SerCommCorporation AngusChang/Manager TEL:886226553988*2598 FAX:886226553965 Email:angus_chang@sercomm.com
1 2 | Operational Description | Operational Description | 7.32 KiB | November 19 2013 |
FCC ID: P27SZSRN02SA Operational Description This device is a ZigBee Safeawake Siren Repeater with built-in a Zigbee module. This device is a ZigBee Safeawake Siren Repeater, which operates in the 2.4GHz frequency spectrum with throughput of up to 2Mbps which OQPSK technique will be applied. The transmitter of the EUT is powered by AC 120V, 60Hz or DC 6V. The antenna used in this product is PCB antenna. The other instruction, please have a look at the users manual. Report No.: RF131029D16
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-02-24 | 2405 ~ 2480 | DTS - Digital Transmission System | Class II Permissive Change |
2 | 2013-11-19 | 2405 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2014-02-24
|
||||
1 2 |
2013-11-19
|
|||||
1 2 | Applicant's complete, legal business name |
Sercomm Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0015548027
|
||||
1 2 | Physical Address |
8F, No. 3-1, YuanQu St, NanKang
|
||||
1 2 |
Taipei, N/A
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
P27
|
||||
1 2 | Equipment Product Code |
SZSRN02SA
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
N******** W****
|
||||
1 2 | Title |
Engineer
|
||||
1 2 | Telephone Number |
886-2******** Extension:
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
N******@SERCOMM.COM
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Yes | |||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | ZigBee Safeawake Siren Repeater | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Class II Permissive Change as described in this filing. Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. | ||||
1 2 | Power listed is conducted. End users and installers must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
1 2 | Name |
R****** C********
|
||||
1 2 | Telephone Number |
+886-******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2405.00000000 | 2480.00000000 | 0.0910000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2405.00000000 | 2480.00000000 | 0.0910000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC