Manufacturer: Shanghai Imilab Technology Co., Ltd. Address: Room 001A, Floor 11, Block 1, No. 588 Zixing Road, Minhang District, Shanghai, China For further information, please go to www.imilab.com. Support: help@imilab.com IMILAB C30 Home Security Camera User Manual EN DE FR IT ES PT RU CN Read this manual carefully before use, and retain it for future reference. CONTENTS English Deutsche Franais Italiano Espaol Portugus P Chinese 01-09 10-18 19-27 28-36 37-45 46-54 55-63 64-70 Product Overview Status indicator MIC Lens MicroSD Slot
(Can be revealed by pushing the lens upward) Loudspeaker Micro-USB Charging port Front View Rear View EN-01 Reset button Package Contents: IMILAB C30 x 1, power cable x 1, wall mounting accessories pack x 1, user manual x 1 Installation IMILAB C30 can be placed on a number of horizontal surfaces, such as a writing desk, dining table, and coee table. It can also be mounted on the wall. 3. Make sure to position the base unit so that the arrow is pointing up. Secure the base unit in place by tightening the screws into the plastic anchors. Mounted IMILAB C30 on a Wall:
1. Drill two holes on the wall by using the base of the IMILAB C30 as a template. It is recommended that you mark the locations of the hole with a pencil before drilling. The diameter of each hole is approximately 6 mm, and the depth is approximately 30 mm. 4. Matching the grooves on the bottom of the camera unit with the raised area on the base unit. Press down until the two surfaces are ush, then turn the camera unit in either direction to lock it in position. 2. Insert the two plastic anchors into the holes on the wall. Warning:
To avoid any damages or injuries, the device must be securely fastened to the oor/wall as specied in the installation instructions. When mounting the security camera on a wall:
Please note that the wall must be able to support at least triple the product's total weight. EN-02 EN-03 Product Instructions Turning the Device On IMILAB C30 will automatically activate once the power cable is inserted into the Micro-USB charging port. Indicator Light Steady blue on: connected/device status is normal Flashing blue: network error Flashing orange rapidly: waiting for connection Flashing orange slowly: system upgrade in progress Installing a MicroSD Card Make sure that the power to IMILAB C30 is already disconnected. Adjust the camera lens upward until the MicroSD slot is revealed, then insert the MicroSD card into the slot (the side with contact points must be facing down). Note: Please turn o the IMILAB C30s power supply before inserting or removing the MicroSD card. Please use a genuine Micro SD card manufactured by a qualied supplier, with a reading/writing speed of no less than U1/Class 10. (Maximum support capacity is 64 GB) MicroSD 1. If the indicator light is ashing orange, that means the device is activated successfully. Else, please reset the device. 2. Once the IMILAB C30 is turned on, please do not attempt to rotate its head by force. If the camera position is incorrect, adjustments can be made through the app. Restore Factory Settings Press and hold the Reset button more than 5s, then you can hear the reset succeed voice. Data stored on the MicroSD card is not deleted. EN-04 EN-05 Install IMILAB Home App Specications Connect with IMILAB Home app. This product works with IMILAB Home app. Control your device with IMILAB Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search IMILAB Home in the app store to download and install it. Open IMILAB Home app, tap
+ on the upper right, and then follow prompts to add your device. Name: IMILAB C30 Model: CMSXJ21E Net Weight: 289 g Lens Angle: 100 Power input: 5 V 2 A Wireless Connectivity: Wi-Fi IEEE 802.11a/b/g/n/ac2.4GHz/5GHz FCC ID: xxxxx-IMILAB-C30 Expandable Memory: MicroSD card (up to 64 GB) Dimensions: 112 mm x 76 mm x 76 mm Operating Temperature: -10 C to 40 C Compatible With: Android 5.0 or iOS 9.0 or above Resolution: 2560 x 1440 Add Device Open IMILAB Home app, tap + on the upper right. Tap[-]and scan the QR code under the device by your phone, then you can follow the steps to add your device. Open IMILAB Home app, tap + on the upper right. TapIMILAB C30and then you can follow the steps to add your device. Please enter the device name to... Camera IMILAB Home Security Cam... IMILAB Home Security Cam... IMILAB Home My device (6) IMILAB Home Security Cam... IMILAB Home Security Cam... IMILAB Home Security Cam... Precautions The operating temperature range for this camera is between -10C and 40C. Do not use the camera in environments with temperatures above or below the specied range. The camera is a precision electronic product. In order to ensure its normal operation, do not install the camera in environments with high humidity levels nor allow water to get into it. To improve the camera's performance, do not place its lens facing or next to a reective surface, such as glass windows or white walls, as this will cause the image to appear overly bright in areas close to the camera and darker in areas further away, or cause the camera to produce white images. Make sure the camera is installed in an area with a strong Wi-Fi signal. Do not place the camera near the objects that may aect its Wi-Fi signal, such as metal objects, microwave ovens. Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user. Note: The version of the app might have been updated, please follow the instructions based on the current app version. EN-06 EN-07 FCC Statement WEEE Information Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. FCC 20cm Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. EU Declaration of Conformity Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type IMILAB C30 is in compliance with Directive 2014/53/EU. EN-08 EN-09 105g 80 75mm IPC021_E01 V1.1 20201210 pantone cool Gray 11C V1.0 IMILAB C30 CMSXJ21E