FCC ID: 2APA9-IPC009A Mi Home Security Camera 360 degree 1080P

Mi Home Security Camera 360 1080P User Manual Read this manual carefully before use, and retain it f or future reference Product Overview Product Installation The Mi Home Security Camera 1080P can be placed on a number of horizontal surfaces, such as a writing desk, dining table, and coee table.It can also be mounted on the wall. Mounting the Security Camera on a Wall 1. Drill two holes on the wall by using the base of the security camera as atemplate. It is recommended that you mark the locations of the holes witha pencil before drilling. The diameter of each hole is approximately 6 mm, and the depth is approximately 25 mm. 3. Make sure to position the base unit so that the arrow is pointing up. Secure the base unit in place by tightening the screws into the plastic anchors. Product Instructions Turning the Device On The Mi Home Security Camera will automatically activate once the power cable is inserted into the Micro-USB charging port. 4. Match the grooves on the boom of the camera unit with the raised area on thebase unit. Press down until the two surfaces are ush, then turn thecamera unit in either direction to lock it in position. reset Loudspeaker Micro-USB Charging Port Status Indicator Lens MIC MicroSD Slot Can be revealed by pushing the lens upward Reset Buon reset Rear View Frontal View 2. Insert the two plastic anchors into the holes on the wall. Package Contents: Mi Home Security Camera 360 1080P x 1,power adapter x 1, user manual x 1, wall mounting accessories pack x 1 When mounting the security camera on a wall:

please note that the wall must be able to support at least triple the product's total weight. If the indicator light is ashing orange, that means the device is activated successfully. If you do not see a ashing orange light, please press and hold the Reset buon to restart the device. Quick Setup Install Mi Home App Scan the QR code or go to App store to download and install Mi Home app. Control your device and interact it with other smart home devices in Mi Home app. Add a Device Open Mi Home app, tap "+" on the upper right, and then follow prompts to select "Mi Home Security Camera 360 1080P" and add your device. Connection Setup Ensure there is a stable Internet connection. The indicator light will blink orange. Open up your mobile app and follow the prompts to connect to the device. The indicator light will remain blue when the connection is successfully made. Precautions The suitable operating temperature range for this product is between -10C and 50C. Please do not use the product in an environment with temperatures above or below the specied range. The security camera is a precision electronic product. In order to ensure its normal operation, please do not install the device in an environment with high humidity levels or allow water to enter the product. To improve the product's performance, please do not place the camera lens facing or next to a reective surface, such as glass windows/doors and white walls, which will cause the image to appear overly bright in areas close to the camera and darker in areas further away, or cause the camera to produce white images. Please install the product in areas with Wi-Fi reception, and try to place the device wherethe Wi-Fi signal is strong. In addition, please keep the security camera away from metal structures, microwave ovens, or other locations where signal strength may be impacted. Indicator Light Steady blue on: connected/device status is normal Flashing blue: network error Flashing orange rapidly: waiting for connection Flashing orange slowly: system upgrade in progress Installing a MicroSD Card Make sure that the power to the security camera is already disconnected. Adjust thecamera lens upward until the MicroSD slot is revealed, then insert the MicroSDcardinto the slot (the side with contact points must be facing down). Note: Please shut o the security camera's power supply before inserting or removingthe MicroSD card. Please use a genuine MicroSD card manufactured by a qualiedsupplier, and make sure that the card's total storage capacity is 64GB or less, with a reading/writing speed of no less than U1/Class 10. MicroSD Restore Factory Seings Press and hold the Reset buon to restore your device to factory seings. Data stored on the MicroSD card is not erased. Consult the dealer or an experienced radio/TV technician for help. FCC 20cm Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmier must not be co-located or operating in conjunction with any other antenna or transmier. FCC ID:2APA9-IPC009A FCC Statement Specications Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses, and canradiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Lens Angle: 110 Resolution: 1080P Power Input: 5 V 2 A Name: Mi Home Security Camera 360 1080P Model: MJSXJ02CM Focal Length: 0.11 inches Net weight: 8.43 oz Expandable Memory: MicroSD card (up to 64 GB) Video Encoding: H.264/H.265 Item dimensions: 4.64 inches x 3.07 inches x 3.07 inches Operating Temperature: -14 F ~ 122 F Compatible with: Android 4.4, iOS 9.0 or later Wireless connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz We hereby declare that all essential radio test suites have been carried out and that the above named product is in conformity to all the essential requirement of Directive 2014/53/EU. Conclusion: When tested as specied, the results shown on the report meet the requirements of the Reuse / Recycling / Rccovery Rate of Directive 2012/19/EU released on EU Oddicial Joumal (OJ). Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Shanghai Imilab Technology Co., Ltd.

(a Mi Ecosystem company) Address: Room 908, Block No. 1, Lane 399, Shengxia Road, Zhangjiang Hi-Tech Park, Shanghai, China 201210 For further information, please go to www.mi.com Real-Time Monitoring Launch the Mi Home app and select a Mi Home Security Camera 3601080P that is already connected to monitor the surroundings in real-time. Thecamera's control interface allows you to adjust the sharpness of theimage, as well as to change the device's vertical and horizontal viewingangles. Additional features such as screen capture or record and remote communications can also be performed. Supporting infrared and image-intensied night vision Playback Automatic Monitoring Shared Remote Viewing With the incorporation of eight infrared illuminators, the security camera is able to view up to a distance of 9 m and capture crystal clear images in the dark. Mi Home Security Camera's playback feature is only available aer installing a compatible MicroSD card.Once a MicroSD card has been installed and the security camera is turned on, videos will be recorded automatically.360 1080P control interface in the Mi Home app.Aer entering the userinterface of the Playback feature, simply slide the bar on the timeline to select the time period you wish to view. Automatic monitoring can be congured through the Mi Home Security Camera 360 1080P control interface in the Mi Home app. Available options include 24-hour, daytime, and nighime monitoring. You can also create your own schedule and set the desired camera angle. This product is able to detect movements within its eld of view. Once movements are detected, Through the Mi Home Security Camera 360 1080P control interface in the Mi Home app, you can set your security camera as a shared device under the General Seings menu, and invite your friends to view the camera remotely. Your friends will be required to download the Mi Home app and log in with his/her Xiaomi account. Mi Home Security Camera 360 1080P 105KB S 2018 3 2 20:51:05 Mi Home Security Camera 360 1080P 108KB S Mi Home Security Camera 360 1080P 108KB S Home Surveillance Review Call Photo Album Shortcut Infrared night vision mode sample Home Surveillance Review Call Photo Album Shortcut Home Surveillance Review Call Photo Album Shortcut General seings Rename Mi Home Security Camera 360 1080P Manage Sharing Share with Mi Account Security Seings Device Sharing Location Management Check for Firmware Updates Delete Device Add Desktop Shortcut Network Information Feedback Note:

The diagram is for reference only. Actual displays will vary based on dierent versions of the Mi Home platform and your smartphone model. Note:

This diagram is for reference only, the actual displayed page might look slightly dierent due to dierence in the used version of Mi Home and/orOS version on your mobile phone. Note:

This diagram is for reference only, the actual displayed page might look slightly dierent due to dierence in the used version of Mi Home and/orOS version on your mobile phone. Note:

This diagram is for reference only, the actual displayed page might look slightly dierent due to dierence in the used version of Mi Home and/orOS version on your mobile phone. pantone cool Gray 11C _504L_506L 75x80mm 2018-4-28 6.5/5.5pt ID SKU 18119 QDJ4026CN 69 6934177701795 MJSXJ02CM 1:1 mm

Mi H o me Security Camera 3 6 0 1 0 8 0 P M o d e l

:

M J S X J 0 2 C M In p ut: 5 V 2 A C F o., Ltd. y C g olo n h c e T b a l i m I i a h g n a h S A 9 0 C ID: 2APA9-IPC0 18344 QDJ4029US UPC 190997000685 V1.1 2018.7.24

Shanghai Imilab Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2APA9-IPC009A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type File Name

(Block Diagram, Schematics, Operational (Block Diagram.pdf, Schematics.pdf, Description) Operational Description.pdf) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely,

(signature) iv a Ht c.

(printed name) g heson Rev 11/20/07

Shanghai Imilab Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 01, Aug. 2018 SUBJECT: FCC Application for (FCC ID: 2APA9-IPCO009A) To Whom It May Concern:

We, the undersigned, hereby authorize Alex feng at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, Guangdong, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Alex feng at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen. Guangdong, China on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,

(signature) aM Hoey

(printed name) wang hesong F.\OOS\FCC\FCC 28F S+\POA Letter. docx

Shanghai Imilab Technology Co., Ltd. 9. Aug. 2018 Federal Commumications Commission Authorization and Evaluation Division To Whom It May Concern:

We,Shanghai Imilab Technology Co., Ltd. , Hereby attest to the fact that we will apply The Verification of Conformity procedure to the class B. The USB ports of Mi Home Security Camera 360 1080P are not capable of transferring data but only used for charging the internal battery. Sincerely yours,

(signature) \Wan he a

(printed name)wang hesofhg