1 2 3 4 5 6 7 8 1 4 4 5 7 8 9 12 2 3 4 6 13 2 3 4 5 6 7 8 9 10 11 1
() 2-3 2-3 11
1D/2D SIM&PSAM SIMPSAMSIM PSAM Nano SIM&Micro SD Nano SIMMicro SD Nano SIM 13 NFC
() NFC BaseService
() () OTA Pb
(Hg)
(Cd)
(Cr(VI)
(PBB)
(PBDE)
SJ/T11363-2006
SJ/T11363-2006 12 A
) ROM JKRA 10 11 Nano SIM SIM/PSAM Micro SD QUICK START GUIDE T8A10 3887505 M05052179 2 3 4 5 6 7 8 9 Quick Start Guide 1 Front Camera (Optional) Indicator Light For indicating the charging status, messages and scans. Function Button Use it to create a custom shortcut. Scan Button Short press the button to scan barcodes. Power Button Short press: turn the screen on/off. Long press: when the device is off, press for 2-3 seconds to turn on the device. When the device is on, press for 2-3 seconds to power off or restart the device. When the system crashes, press for 11 seconds to restart the device. Speaker Holes Please keep the speaker holes clean. Scanner For barcode data collection. Note: laser radiation. Do not stare into beam. Rear Camera For photo taking and 1D/2D barcode scanning. Pogo Pin The number depends on the specific configuration. 10 SIM/PSAM Card Slot It by default is a SIM card slot, but you can choose a PSAM card feature which is available in certain device versions. Note: please follow the instruction label to insert the card. To remove the card, hold and pull the metal slot handle out, push the handle back and then take the card out. 11 Nano SIM & Micro SD Card Slot For Nano SIM card and Micro SD card. Note: please shut down the device down before inserting or taking the Nano SIM card out. Otherwise, it may cause device malfunction. Notices Safety Warning Certification information (SAR) CE certication information (SAR) Technical features and characteristic 12 Battery Cover Lock Slide to open or close the cover. Note: please keep the cover closed. Otherwise, it may affect your use. 13 NFC Reader (optional) For reading NFC cards ,like loyalty cards. Table for Names and Content Identification of Toxic and Hazardous Substances in this Product Toxic or Hazardous Substances and Elements Pb Hg Cd Cr(VI) PBB PBDE Part Circuit Board Component Structural Component Packaging Component
: indicates that the content of the toxic and hazardous substance in all homogeneous materials of the component is below the limit specified in SJ/T 11363-2006.
: indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the component exceeds the limit stipulated in SJ/T 11363-2006. However, as for the reason, because there is no mature and replaceable technology in the industry at present. The products that have reached or exceeded environmental protection service life should be recycled and reused according to the Regulations on Control and Management of Electronic Information Products, and should not be discarded randomly. Manufacturer:
Shanghai Sunmi Technology Co., Ltd. Room 505, Building 7, KIC Plaza, 388 Songhu Rd., Yangpu District, Shanghai, China. Connect the AC plug to the AC socket corr esponding to the marked input of the power ada pter;
This is a Class A product. This product may cause radio interference in living environments. In that case, the user may be required to take adequate measures against interference. Battery replacement:
Explosion danger may arise if replacing with the wrong battery!
The replaced battery shall be disposed of by maintenance personnel, and please do not throw it into fire!
Significant Safety Instructions Do not install or use the device during light ning stor ms to avoid the poten tial risks of light ning shock;
Please turn off the power immediately if you notice abnormal odor, heat or smoke;
Suggestions Do not use the terminal in extremely cold or hot environments;
Use the ter minal in a clean and dust-fre e environment if possib le to prevent small items from falling into the ter minal;
Do not use the terminal near medical equipment without permission. Statements The Company does not assume responsibilities for the following actions:
Damages caused by use and maintenance without complying with the conditions specified in this guide;
The Co mpany wil l not as sume any responsibilities for the damages or problems caused by optional items or co nsumab les (rather t han the initial products or ap proved produc ts of the Co mpany). The c ustomer is not en titled to c hange or m odify the product without our co nsent . The products operating system supports official system updates, but if you change the operating system files by system cracking, it may cause system instability and security risks and threats. Product safety warnings To prevent possible injury, please read all instructions and safety information before you use the product. Operating temperature: -20C ~ 55C, Storage temperature: -40 C ~ 70 C. Battery safety Charge battery only at ambient temperatures ranging from 0C to 60C.
(1) CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type of battery recommended by the manufacturer. Dispose of used batteries according to the battery manufacturers instructions.
(2) CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
* The product information listed on this page may be updated from time to time due to product upgrades or other reasons.SUNMI reserves the right to modify the product information and co- ntents on this page without notice. This device was tested for typical body-worn operations with the back of the handset kept 0mm away. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided. If you are using pacemaker, hearing aid, cochlear implant or other device, please use the phone according to the doctors advice. EU regulatory conformance CE certication information (SAR) Conformity CE Hereby,Shanghai Sunmi Technology Co., Ltd.declares that the Wireless data POS System (Model NO .:T5F01is in compliance with the essential requirements and other relevant provisions of RED 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet addresswww.sunmi.com INFORMATION ABOUT THE SOFTWARE The description of accessories and components, including software, which allow the radio equipment to operate as intended, can be obtained in the full text of the EU declaration of conformity at the following internet address: www.sunmi.com . RESTRICTIONS OF USE This product may be used in the following European member states subject to the following restrictions. For products that operate in the frequency band 5.150 to 5.350 GHz, wireless access systems (WAS), including radio local area networks
(RLANs), shall be restricted to indoor use. This product may be used in the following European member states subject to the following restrictions. For products that operate in the frequency band 5.150 to 5.350 GHz, wireless access systems (WAS), including radio local area networks (RLANs), shall be restricted to indoor use. AT BE BG CY CZ DE DK EE ES FI FR GR HU IE IT LT LU LV MT NL PL PT RO SE SI SK UK
(NI) EU Representative :SUNMI France SAS 186,avenue Thiers,69006 Lyon,France This symbol means that it is forbidden to dispose the product of with normal household waste. At the end of the product life cycle, waste equipment should be taken to designated collection points, returned to the distributor when purchasing a new product, or contact your local authority representative for detailed information on WEEE recycling. system into a third party ROM system or alter the RESTRICTIONS OF USE Operation Frequency PowerdBm 824MHz-849MHzTX)869MHz-894MHzRX 32.12 GSM850 GSM900 DCS1800 880-915(TX),925-960(RX) 1710-1785(TX),1805-1880(RX) WCDMA Band I 1920-1980 MHz(TX), 2110-2170 MHz(RX) WCDMA Band VIII 880-915MHz(TX),925-960MHz (RX) LTE Band 1 1920-1980 MHz(TX), 2110-2170 MHz(RX) LTE Band 3 1710-1785 MHz(TX), 1805-1880 MHz(RX) LTE Band 7 2500-2570 MHz(TX), 2620-2690 MHz(RX) LTE Band 8 880-915MHz(TX),925-960MHz(RX) LTE Band 20 832-862MHz(TX),791-821MHz(RX) LTE Band 28 703-748MHz(TX),758-803MHz(RX) LTE Band 38 2010-2025 MHz(TX), 2010-2025 MHz(RX) LTE Band 40 2300-2400MHz(TX), (RX) BT BLE 2.4G Wi 5G Wi 2402-2480MHz(TX/RX) 2402-2480MHz(TX/RX) 2412-2472MHz(TX/RX) 5150-5250MHz(TX/RX) 5745-5825MHz(TX/RX) 33.00 31.00 24.00 24.00 23.00 23.00 23.00 23.50 23.50 23.50 23.50 23.50 8.50 5.50 18.00 16.50 11.00 FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: The user is cautioned that changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC ID: 2AH25T8A10 ISED Canada compliance statements the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation l'intrieur an de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. A B C D E F A B C D E 62mm 155mm 310mm 155mm
+25 105g M05052179 PANTONE Orange 021C PANTONE 165C L2Ks -----
20210914 NFC mm F 1.2 8 1 2 3 4 5 6 7