More Information, Please visit www.sunmi.com Hotline(0086)-400-902-1168 D1 User Manual Book W3500 This Manual Book shall be read carefully before use and remained in safe hands. Quick Installation Guide Minimal Settings Only a few steps to turn on the intelligent business equipment. 1 Press the power button and the screen lights on. Enter the rst start-up screen and operate according to the prompt. Two modes of Internet access are available. 2 Wi-Fi setting. Press [Setting] and start WLAN. Enter the searching interface of WLAN, waiting for WLAN network available;
Click on the WLAN to be connected. A password is required for access if an encrypted network is chosen. 3 Setting of LAN How to download/use the application This POS machine is suitable for cashier environment of business customers of dierent industries including Chinese and Western foodservice industry, exclusive department store, convenience store, the banking service industry, consulting station, interactive multimedia and advertisement broadcast system, etc. Relevant apps can be scanned, downloaded and installed in the application store with access to the internet. Please read the built-in Help APP for more help. 1. Rotate the display to a horizontal state 2. Open the line hide cover to the power port at the bottom of the 3. Connect the power interface of the adapter mainframe. And insert the other side of the adapter to electric supply sockets 4. Press the power button for two seconds to turn on. Product Introduction 15.6 Display USB interface Power, Pilot Light 5V TXD RXD GND Card slot cover Slot reader interface Interface cover TF card slot Debug key Micro USB debug port Line hide cover Metal Base USB interface USB interface Cashbox interface Headset jack Serial interface LAN interface Power port Power In the state of power o, a short press turns on the computer. In the state of normal use, press on the power button for two or three seconds to choose power o or restart. In the state of system halted, press on the power button for 11 seconds for power o. Pilot Light Blue light on when the power is on. Light o when the power is o. USB Interface For external keyboard, mouse and USB drive. Display For the touch screen used by the operator. Metal Base For supporting the display when put on the desktop. Able to be replaced with the VESA suspension bracket. Slot reader interface For external MSR/RFID POS Micro USB debug port, debug key For facilitydebugging. Card slot is an optional part which may not becontained according to conguration. TF card slot For external TF card. Cashbox Interface For external cashbox with 120ms electric pulse output. No continuous power supply. This facility only supports 24V/1A cashbox. There may exist hidden troubles that will burn the circuit of the cashbox in case of 12V cashbox. Installation Steps for the VESA Bracket 2 3 1 5 4 6 Remove the base 1. Put the display at on the desktop with its face down. 2. Rotate the metal base to a vertical state. 3. Remove the lower cover of the bracket. Remove the base 4. Rotate the metal base to a horizonal state. 5. Remove the upper cover of the bracket. Remove the base 6. Unscrew the four M4 screws with a screwdriver and complete the removal of base. Install VESA accessories 1. Put the VESA bracket aligning to four screw holes according to required direction. 2. Use the four M4 screws removed from the base to x the VESA bracket. in accordance with VESA bracket manual book 3. Install the bracket on the wall or desk and complete the installation of VESA suspension bracket. Note: This machine only supports the installation for VESA MIS-D (100100mm) suspension bracket. The VESA bracket is an optional accessory which needs to be purchased by the user. Basic Parameters for POS Machine Operating system Android 6.0 Processor Qualcomm snapdragon 8-core processor Display resolution 15.6 resolution HD 1366 x 768 Storage 8GB ROM + 1GB RAM Touch screen Multi-touch capacitive display Wi-Fi Support 802.11b/g/n 2.4GHz Bluetooth Support Bluetooth 3.0/4.0 and iBeacon Loudspeaker Single 1.2W voice reaches 90db External interface 5x USB Type A interfaces, 1x RJ11 serial interface, 1x RJ12 24V cashbox interface, 1x RJ45 LAN interface, 1x headset jack, 1x power port, 1x Micro-USB debug interface External storage card MicroSD (TF), 64G maximum VESA In accordance with VESA MIS-D 100100mm Standard Item dimension L 35cm W 38cm T 17cm AC adapter Model No.:ADS-65HI-19A-1 24036E Input:AC 100~240V,50/60Hz,1.2A Output:DC 24V,1.5A Manufacturer:Shenzhen HONOR Electronic Co., Ltd. Address:Room 1603, Chuangzhan Center, No. 6007, Shennan Road, Futian, Shenzhen, Guangdong, P.R. China Congurations and parameters listed in this page are indicative and actual products on the market shall prevail. Name and Content of Toxic or Harmful Substances in this Product Toxic or Harmful Substances or Elements Part Name Lead Mercury Cadmium Pb
(Hg)
(Cd) Hexavalent chromium
(Cr(VII) Components of circuit board Print head component Polybrominated biphenyls
(PBB) Polybrominated diphenyl ethers
(PBDE)
: Means that the content of the toxic or harmful substance in all homogeneous materials of this part is below the limit stipulated in SJ/T11363-2006.
: Means that the content of the toxic or harmful substance in at least one of the homogeneous materials of this part is beyond the limit stipulated in SJ/T11363-2006; but as for the component marked with on the table, the content is beyond the l imit since there is no alternative mature technology in the industry yet. The products reaching or exceeding the environmental service life shall be recycled per Regulations on the Control and Management of Electronic Information Products and shall not be littered. Package content D1 Instruction Manual Precautions to the identifying input on the power adapter;
the product may cause radio interference. Therefore, Warning Please insert the AC plug into the AC outlet according It is prohibited to use the device in any places with potential explosive gases;
Nonprofessionals shall not open the power adapter anyhow so as to avoid dangers;
The device is a Grade A product. In living environment, users may be required to take practical measures against the interference. About the battery replacement:
1. It may cause explosion with wrong type battery 2. Old battery which is replaced should be handled by repair man, do not put it in re!
Adapter shall be installed near the equipment and shall be easily accessible. The operating temperature of the device between 0 to 45. The device complies with RF specications when the device used at 20cm form your body. This product can be used across EU member states. Important Safety Instructions Avoid installing or using during thunder and lightning,other wise lightning stroke may occur;
Cut o the power immediately if there is abnormal smell, overheating or smog Do not touch the sharp paper cutting tool!
the device without following the User Guide;
Statement The company is not responsible for the following behaviors:
Damages caused by using and maintaiing Damages or problems caused by selection of objects or Consumables (products which are not the initial ones provided or In this case, the company will not undertake any responsibility. No one is entitled to modify or change the product unless permitted by the company. recognized by the company). Recommendation Do not use the device near water or in humid environment.Keep liquid from falling onto the terminal;
Do not use the device in extremely cold and hot environment, e.g. around re or lighted cigarettes;
Do not smash, throw or bend the device;
Use the device in clean and dustfree environment as much as possible and keep small items from falling into the terminal;
Do not use it near medical devices unless permitted. Disclaimer Discrepancies between the product and the le concerning details may raise due to product updates. Please be subject to the material object. The company reserves the right to interpret the le and the right to revise this manual without prior notices. Please make sure the temperature for adapter will be from -10 to 40 . Please make sure the temperature for device will be from -10 to 40 . EU Regulatory Conformance Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the radio equipment type is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sunmi.com Notice: Observe the national local regulations in the location where the device is to beused. This device may be restricted for use in some or all member states of the European Union (EU). Adapter shall be installed near the equipment and shall be easily accessible. The operating temperature of the device between 0 to 45. The device complies with RF specications when the device used at 20cm form your body This product can be used across EU member states. FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-
tial installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct theinterference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Technical features and characteristic the product includes the following features and characteristics WIFI Operation Frequency 2412MHz~2472MHz 802.11b/802.11g/802.11n(H20) 2422MHz~2462MHz 802.11n(H40) Maximum Power(2.4GHz) 16.40dBm(E.I.R.P.) BT Operation Frequency 2402~2480MHz Maximum Power(BT3.0+EDR:) 8.80dBm(E.I.R..) Maximum Power(BT4.0:):
-2.85dBm(E.I.R.P.) GSM Operation Frequency:
E-GSM 900: 880~915MHz DCS 1800: 1710~1785MHz Maximum Power (E-GSM 900) E-GSM 900:32.59dBm Maximum Power (DCS 1800) 29.84dBm WCDMA Operation Frequency:
Band 1 TX:1920MHz~1980MHz,RX:2110MHz~2170MHz Maximum Power (WCDMA Band 1) 22.09dBm Note D1 North America edition is limited using channel 1-11. This limited operation can be only set by software and was done before the product down from the product line. All the products for North America marketing were embedded this limited before shipping. Customers have no way to choose the channel 12 & 13. Limited by local law regulations, version for North America does not have region selection option.