FCC ID: 2AH25D22ND POS System

A B C D E F 1 2 3 4 5 6 7 8 POS machine Minimal Settings Only a few steps to turn on the intelligent business equipment. Press the power button and the screen lights on. Enter the first start-up screen and operate according to the prompt. Two modes of Internet access are available. Wi-Fi setting. Press [Setting] and start WLAN. Enter the searching interface of WLAN, waiting for WLAN network available;

Click on the WLAN to be connected. A password is required for access if an encrypted network is chosen. Setting of LAN How to download/use APPs Relevant Apps can be downloaded while the network is connected. Open the App market, and search and download the App to complete the installation. To inquire detailed information of the above software: select settings -> application, and select correspond-

ing software to inquire its information;

how to uninstall the software: select settings -> application -> application management -> uninstall to uninstall the application; or press the icon and drag it into the trash can to uninstall it. Please read the built-in Help APP for more help. 15.6main screen only

(L3516) Package content 1 main machine 1 user manual 1 power adapter Basic Parameters for POS Machine Operating system Based on Android Processor Cortex-A53, 1.2GHz Display resolution 15.6 resolution HD 1366 x 768 (the actual product will prevail) Storage 8GB ROM + 1GB RAM or 8GB ROM + 2GB RAM (the actual product will prevail) Touch screen Multi-touch capacitive display Wi-Fi Support 802.11b/g/n 2.4GHz Bluetooth Support Bluetooth 2.1/3.0/4.0 Loudspeaker Single 1.2W voice reaches 90db External interface 4 x USB Type A interfaces, 1x RJ11 serial interface, 1 x RJ12 24V cashbox interface, 1x RJ45 LAN interface, 1 x headset jack, 1x power port, 1x Micro-USB debug interface,1 x TF card slot External storage card MicroSD (TF), 64G maximum AC adapter Input: AC100~240V/1.5A Output: DC24V/1.5A FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfer-

ence that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Configurations and parameters listed in this page are indicative and actual products on the market shall prevail. Precautions Warning Please insert the AC plug into the AC outlet accord-

ing to the identifying input on the power adapter;

Important Safety Instructions Avoid lightning,other wise lightning stroke may occur;

installing or using during thunder and Please use the device within the temperature range of 0 ~ 40 , and store the device and accessories within the range of - 20 ~ 60 ;

Cut off the power immediately if there is abnormal smell, overheating or smog!

It is prohibited to use the device in any places with potential explosive gases;

Nonprofessionals shall not open the power adapter anyhow so as to avoid dangers;

The device is a Grade A product. In living environ-

ment,the product may cause radio interference. Therefore,users may be required to take practical measures against the interference. About the battery replacement:

1. It may cause explosion with wrong type battery!

2. Old battery which is replaced should be handled Recommendation Do not use the device near water or in humid environment.Keep liquid from falling onto the terminal;

Do not use the device in extremely cold and hot environment, e.g. around fire or lighted cigarettes;

Do not smash, throw or bend the device;

Use the device in clean and dustfree environment

.as much as possible and keep small items from falling into the terminal;

Do not use it near medical devices unless permitted. Statement The company is not responsible for the following behaviors:

Damages caused by using and maintaining the device without following the User Guide;

Damages or problems caused by selection of objects or consumables (products which are not the initial ones provided or recognized by the company) No one is entitled to modify or change the product unless permitted by the company The operating system of this product supports the official system update.If the third partys ROM system is swiped by the user or the system file is modified with cracking method, it may lead to the instability of the system and bring about safety risk & security threat. Disclaimer Discrepancies between the product and the file concern-

ing details may raise due to product updates. Please be subject to the material object. The company reserves the right to interpret the file and the right to revise this manual without prior notices. Product Introduction Take main screen as sample Display Loudspeaker Power Threading slot Power In the state of power off, a short press turns on the machine. In the state of normal use, press on the power button for two or three seconds to choose power off or restart. In the state of system halted, press on the power button for 11 seconds for power off. Display For the touch screen used by the operator. Cashbox interface USB interface USB interface TF card slot Power port LAN interface Serial interface Headset jack Micro-USB debug interface Threading installation Thread the power line through the rear via hole of the base;

Turn the screen over to expose the threading hole;

Connect the power interface of the adapter to the power port at the bottom of the host;

Insert the other plug of the adapter into the mains socket. ISED Canada compliance statements This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:(1) Lappareil ne doit pas produire de brouillage, et (2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den comprom-

ettre le fonctionnement. EU regulatory conformance Hereby, Shanghai Sunmi Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: www.sunmi.com. INFORMATION ABOUT THE SOFTWARE The description of accessories and components, including software, which allow the radio equipment to operate as intended, can be obtained in the full text of the EU declaration of conformity at the following internet address:

www.sunmi.com. RESTRICTIONS OF USE This product may be used in the following European member states subject to the following restrictions. For products that operate in the frequency band 5.150 to 5.350 GHz, wireless access systems (WAS), including radio local area networks (RLANs), shall be restricted to indoor use. EU Representative :SUNMI France SAS 186,avenue Thiers,69006 Lyon,France This symbol means that it is forbidden to dispose the product of with normal household waste. At the end of the product life cycle, waste equipment should be taken to designated collection points, returned to the distributor when purchasing a new product, or contact your local authority representative for detailed information on WEEE recycling. RF Exposure Statement (SAR) This equipment complies with EU, FCC and IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Manufacturer: Shanghai Sunmi Technology Co., Ltd. Address: Room 505, Building 7, KIC, 388 Songhu Road, Yangpu District, Shanghai, PR China. M05054248 D2 Quick Start Guide A B C D E

1. : 128g 2. 3.M05054241 D2 2022/02/16 1 2 3 4 5 6 7 XXXXXXXXXXXXXX mm F 1.3 8

Request for Confidentiality Date: 2022/03/17 Subject: Confidentiality Request for: 2AH25D22ND Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent*

Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation BOM Schematics Test Setup Photos Users Manual Software Security Info

*Note: (Insert Explanation as Necessary) Shanghai Sunmi Technology Co.,Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TIMCO in the event information regarding the product or the product is made available to the public. TIMCO will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By:

Fang Lu

(Print name)

(Signature/Title2) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.