More Information, Please visit www.sunmi.com H otline(0086)-400-902-1168 T1 mini POS User Manual Book Before using this product, please carefully read this manual and keep it properly. Guide for quick installation Simple Settings 1 Press the open button to open the cover of the printer. 2 Place the thermal paper in the printer. To start this intelligent devise for commercial use, you only need several steps. 1 Press ON button to light the screen. First entering the startup screen, follow the prompts. You can choose from two network modes on this device. 2 Wi-Fi settings Click Settings button and open WLAN to enter the WLAN-searching interface. Wait for the list of available WLAN hotspots. Click corresponding WLAN. If an encrypted network is selected, the device will not be connected to the WLAN until the password is entered. 3 LAN settings How to download/use APPs Relevant Apps can be downloaded while the network is connected. Open the App market, and search and download the App to complete the installation. To inquire detailed information of the above software: select settings -> application, and select corresponding software to inquire its information;
how to uninstall the software: select settings -> application -> application management -> uninstall to uninstall the application; or press the icon and drag it into the trash can to uninstall it. 3 Connect with the power supply. 4 Press ON button and the printer will be turned on in two seconds. For more help, please refer to the Help App inside the device Introduction to the POS 58 thermal printer version W 1301 80 ther mal printer version W 1303 paper output exit of the printer ON button cover of the printer button to open the cover of the printer main screen QR code scanning box NFC card reader price-displaying screen Paper output exit of the printer It is used to print receipts when the device is on. Button to open the cover of the printer It is used to open the cover of the printer and change the paper. Main screen It is the touch screen used by the operator. ON button W hile the device is o , click the O N button to turn on the machine While the device is under use, press ON button for 2 to 3 seconds to turn on or turn o the device. While the device is on, press ON button for 11 seconds to turn o the device. QR code scanning box QR code scanning box is used by users to scan QR code to pay the fee. The function of QR code scanning is o ptional. According to the conguration, this function may not be equipped. NFC card reader It is used for sensing M1 card NF C is optional, according to the spec Price-displaying screen It is used for displaying the price information of the customer. 5V TXD RXD GND audio USB output port serial USB port port LAN port cashbox power supply port port Micro USB debugging port TF card slot debugging button TF card slot It is used for external expansion TF memory card. Micro USB debugging port, debugging button They are used to debug the device. Cashbox port It is used to connect the cashbox, with an electrical impulse of 120 ms and no continuous po w er supply being provided. This device only supports external connection with 24V/1A cashbox. If 12V cashbox is used, there may be risks that the circuit of the cashbox will be burnt. Instruction to load paper Description of the paper 58 version supports the thermal paper with the seize of 570.5 m m 60 m m 80 version supports the ther mal paper with the size of 790.5 m m 60 m m Regular fault debugging Problems Description to QR code scanning by cellphone The version with the function of QR code scanning supports this function and can recognize the QR code for payment by cellphone. Solutions What if the printer is dead?
Press the O N button for 11 seco n d s, then the printer is o . Click the O N button to turn the printer on. What if the printer does not work?
Make sure the cover is closed correctly. Make sure whether the paper is jammed. What if the printed paper is blank?
What if the printing is blur?
Please check whether the paper roll is put upside down;
Please check whether wrong therVmal paper roll is used. Please check whether the thermal printhead is dirty. If it is, please clean it with swab that has been dipped in anhydrous alcohol. Please use quality thermal paper to avoid blur printing due to bad quality of paper. General parameters of the POS Operating system A n droid 6.0 sun mi secure operating syste m Processor Memorizer Screen Qualcomm Snapdragon with Octa-Core 8GB ROM+1GB RAM M ain screen 11.6 inches, H D resolution 1366 x 768 Touch screen G+G capacitive multi-touch touch screen Customer display 128 x 40 Dots Printer Wi-Fi Bluetooth High-speed 58 thermal printer is installed, High-speed 80 ther mal printer is installed, with a printing speed of 70 m m/s, with an automatic cutter and a printing speed supporting the paper roll with a maximum of 160 m m/s, supporting the paper roll with dia meter of 60 m m. a maxi mu m dia meter of 60 m m. 2.4G, support IEEE 802.11 b/g/n Sup port Bluetooth 2.1/3.0/4.0, support BLE QR code scanning camera M o d ule O nly support m o bile phone Q R code. NFC Button M o d ule O nly M1 cards are supported. ON button (screen-locking button) + volume increase/decrease button Loudspeaker 1.2W External memory card External interface Sup port MicroS D(TF), maxi m u m 64 G 4 x USB TypeA port, 1 x RJ11 serial port, 1 x RJ12 cashbox port, 1 x RJ45 LA N port 1 x audio output port, 1 x power supply port, 1 x Micro-USB debugging port Power adapter InputA C100 ~240V/1.7A Output D C 24V/2.5A Size 290 m m x 290 m m x 100 m m Working environment W orking te m perature: -10C ~55C Storage te m perature: -20C ~60C Name and content of toxic and harmful substances contained in this product are shown in the following table Toxic and harmful substances and elements Pb
(Hg)
(Cd)
(Cr(VII)
(PBB)
(PBDE) Name of parts Circuit board Shell
:It indicates that the content of toxic and har mful substances in all ho m o geneous materials of this part is belo w the limit specied in SJ/T11363-2006.
:It indicates that the content of toxic and har mful substances is higher than the limit specied in SJ/T11363-2006 in at least one homogeneous material of this part; however, the the reason why the toxic substance of that part exceeds the limit is that there is no applicable material to replace it currently. For products that have reached or passed the service years for environmental protection, they should be recycled according to Measures for Control and Management of Electronic Information Products and should not be thrown away at will. Technical features and characteristic the product includes the follo wing features and characteristics WIFI Operation Frequency 2412 M Hz ~2462 M Hz 802.11b/802.11g/802.11n(H20/H40) Maximum Power 20.49dB m BT Operation Frequency 2402 ~2480 M Hz M axi m u m Po w er 9.81dBm NFC Operation Frequency 13.56 M Hz Contents of Package 1 main machine 1 user manual (including contents of package, warranty card, qualication certicate) 1 po w er adapter Precautions Warning Important Safety Instructions Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the radio equipment type is in compliance with Directive 2014/53/E U. EU Regulatory Conformance Please insert the AC plug into the AC outlet according Avoid installing or using during thunder and lightning,other to the identifying input on the power adapter;
wise lightning stroke may occur;
It is prohibited to use the device in any places with Cut o the po w er im m e diately if there is abnor mal potential explosive gases;
s m ell, overheating or s m o g Nonprofessionals shall not open the power adapter anyhow so as to avoid dangers;
The device is a Grade A product. In living environment, the product may cause radio interference. Therefore, users may be required to take practical measures against the interference. Do not touch the sharp paper cuttin g tool!
Statement The company is not responsible for the following behaviors:
Damages caused by using and maintaining the device About the battery replacement:
without following the User Guide;
1. It may cause explosion with wrong type battery 2. Old battery which is replaced should be handled by repair man, do not put it in re!
Adapter shall be installed near the equipment and shall be easily accessible. The operating temperature of the device between
-10 to 55. The device co m plies with RF specications when the device used at 20c m for m your body. This product can be used across EU member states. Recommendation Do not use the device near water or in humid environment.Keep liquid from falling onto the terminal;
Do not use the device in extremely cold and hot environ m e nt, e.g. around re or lighted cigarettes;
Do not smash, throw or bend the device;
Use the device in clean and dustfree environment as much as possible and keep small items from falling into the terminal;
Do not use it near medical devices unless permitted. Damages or problems caused by selection of objects or Consumables (products which are not the initial ones provided or recognized by the company). In this case, the company will not undertake any responsibility. No one is entitled to modify or change the product unless permitted by the company. Disclaimer Discrepancies bet ween the product and the le concerning details may raise due to product updates. Please be subject to the material object. The company reserves the right to interpret the le and the right to revise this manual without prior notices. Please make sure the temperature for adapter will be from
-10 to 55 . Please make sure the temperature for device will be from
-10 to 55 . The full text of the EU declaration of conformity is available at the following internet address: www.sunmi.com Notice: The device co m plies with RF specications when the device used at least 20c m fro m hu m a n body. FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, w hich can be deter mined by turning the equip m e nt o and on, the user is encouraged to try to correct theinterference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equip m e nt into an outlet on a circuit di erent fro m that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or m o dications not expressly approved by the party responsible for co m pliance could void the user's authority to operate the equipment.This equipment must be installed and operated in accordance with provid-
ed instructions and the antenna(s) used for this trans mitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Notice for Canada This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1)This device may not cause interference; and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.