|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2024-09-25
|
|
various
|
2024-06-14
|
|
various
|
Applicant's complete, legal business name |
Shanghai Sunmi Technology Co.,Ltd.
|
|
various
|
FCC Registration Number (FRN) |
0025501644
|
|
various
|
Physical Address |
Room 505,No.388,Song Hu Road, Yang Pu District, Shanghai, China
|
|
various
|
Room 505,No.388,Song Hu Road
|
|
various
|
Shanghai, N/A
|
|
various
|
China
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
P******@element.com
|
|
various
|
p******@element.com
|
|
various
|
TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
various
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
various
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
2AH25
|
|
various
|
Equipment Product Code |
T6831
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
F****** L********
|
|
various
|
Title |
Certification Manager
|
|
various
|
Telephone Number |
+8618********
|
|
various
|
Fax Number |
+8621********
|
|
various
|
E-mail |
f******@sunmi.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/23/2025 |
| various | 12/10/2024 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | No |
| various | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral |
| various | DXX - Part 15 Low Power Communication Device Transmitter |
| various | PCT - PCS Licensed Transmitter worn on body |
| various | DSS - Part 15 Spread Spectrum Transmitter |
| various | DTS - Digital Transmission System |
| various | NII - Unlicensed National Information Infrastructure TX |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Smart POS System |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| various | Modular Equipment Type | Does not apply |
| various | Purpose / Application is for | Class II Permissive Change |
| various | Original Equipment |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | Class II Permissive change as described in this filing. |
| various | Output power listed is ERP for operation below 1 GHz, EIRP for operation above 1 GHz, and conducted power for Part 90S (814-824 MHz).
LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4, 1.4/3/5/10 MHz BW modes in Band 5, 5/10/15/20 MHz BW modes in Band 7/38/41, 1.4/3/5/10/15 MHz BW modes in Band 26, and 5/10 MHz BW modes in Band 40.
The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.12 W/kg and 1.28 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.42 W/kg and 1.51 W/kg respectively.
Class II Permissive change as described in this filing.
This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. |
| various | RF output power is peak conducted.
The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.12 W/kg and 1.28 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.42 W/kg and 1.51 W/kg respectively.
Class II Permissive change as described in this filing. |
| various | RF output power is conducted.
Device supports 20 and 40 MHz BW modes.
The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.12 W/kg and 1.28 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.42 W/kg and 1.51 W/kg respectively.
Class II Permissive change as described in this filing. |
| various | RF output power is conducted.
Device supports 20, 40 and 80 MHz BW modes.
The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.12 W/kg and 1.28 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.42 W/kg and 1.51 W/kg respectively.
Class II Permissive change as described in this filing. |
| various | Output power listed is ERP for operation below 1 GHz, EIRP for operation above 1 GHz, and conducted power for Part 90S (814-824 MHz).
LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4, 1.4/3/5/10 MHz BW modes in Band 5, 5/10/15/20 MHz BW modes in Band 7/38/41, 1.4/3/5/10/15 MHz BW modes in Band 26, and 5/10 MHz BW modes in Band 40.
The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.14 W/kg and 1.12 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.44 W/kg and 1.36 W/kg respectively.
This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. |
| various | RF output power is peak conducted.
The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.14 W/kg and 1.12 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.44 W/kg and 1.36 W/kg respectively. |
| various | RF output power is conducted.
Device supports 20 and 40 MHz BW modes.
The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.14 W/kg and 1.12 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.44 W/kg and 1.36 W/kg respectively. |
| various | RF output power is conducted.
Device supports 20, 40 and 80 MHz BW modes.
The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported standalone 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.14 W/kg and 1.12 W/kg respectively. The highest reported simultaneous 1g SAR for body (separation 5 mm) and 10g SAR for limbs (separation 0 mm) exposure conditions are 1.44 W/kg and 1.36 W/kg respectively. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
Industrial Internet Innovation Center (Shanghai)
|
|
various
|
Chongqing Academy of Information and Communcations
|
|
various
|
Name |
Z****** Z********
|
|
various
|
L****** Y********
|
|
various
|
Telephone Number |
+86 2********
|
|
various
|
15223********
|
|
various
|
E-mail |
z******@3in.org
|
|
various
|
l******@caict.ac.cn
|
|