Technical specifications Item Operating system CPU basic frequency RAM FLASH Display Technical Specifications SUNMI OS 2.0 (based on Android 7.1) 1.3GHZ four cores 1GB LPDDR3 8GB Nand Flash 5.45 inch IPS, resolution 1440720 Touch screen Capacitive two-touch screen Camera 5M AF / 0.3M FF optional Wireless data Wi-Fi 2G850/1900 3GB2/B4/B5 4GB2/B4/B5/B7/B12/B17/B25/B26/B38/B41 Build-in Wi-Fi 802.11a/b/g/n(2.4G/5GNODFS) Bluetooth Support of bluetooth 4.0 Keys Power key, volume key Interfaces USB Type C Nano SIM Printer type Printing paper specifications Battery Outline dimensions Adapter Thermal Printer Width 58mm, maximum diameter 50mm 7.6V/2580mAh L 219.1mm W 80mm H 17.8mm OUTPUTDC5V/2A INPUTAC100~240V/0.3A 50/60Hz RF Exposure Information (SAR) :
This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. CE certification information (SAR) This device was tested for typical body-worn opera-
tions with the back of the handset kept 0mm away. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided. If you are using pacemaker, hearing aid, cochlear implant or other device, please use the phone according to the doctors advice. PRODUCT SAFETY WARNINGS Use responsibly. Read all instructions and safety information before use to avoid injury.The limit operating ambient temperature of the equipment declared by the manufacturer is -10~45C Battery safety Charge battery only at ambient temperatures ranging from 40C.
(1) CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type of battery recommended by the manufacturer. Dispose of used batteries according to battery manufacturers instructions.
(2) CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
(3) CAUTION:Battery charging temperature upper limit is 40C. Adapter safety When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 0C~40C. For altitude 2km below use only Wi-Fi Safety Turn Wi-Fi off in areas where Wi-Fi use is prohibited or when it may cause interference or danger, such as in airplanes while flying. Declaration of Conformity Name and content of toxic and harmful substances contained in this product are shown in the following table Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the Wireless data POS System(Model No.:T5930) is in compliance with the essential requirements and other relevant provisions of RED 2014/53/EU. CAUTION: The device is restricted to indoor use when operated in the European Community using frequency in 5150MHz~5250MHz to reduce the potential for interference. 5.8G SRD receiver category1 Technical features and characteristic Operation Frequency Transmitted FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Toxic and harmful substances and elements
(Pb)
(Hg)
(Cd)
(Cr(VII)
(PBB)
(PBDE) Name of parts Circuit board Shell
:It indicates that the content of toxic and harmful substances in all homogeneous materials of this part is below the limit specified in SJ/T11363-2006.
:It indicates that the content of toxic and harmful substances is higher than the limit specified in SJ/T11363-2006 in at least one homogeneous material of this part; however, the the reason why the toxic substance of that part exceeds the limit is that there is no applicable material to replace it currently. For products that have reached or passed the service years for environmental protection, they should be recycled according to Measures for Control and Management of Electronic Information Products and should not be thrown away at will. This product can be used across EU member states. The full text of the EU declaration DOC is available at the following internet addresswww.sunmi.com Manufacture Shanghai Sunmi Technology Co.,Ltd. Room 505 No.388 Song Hu Road Shanghai, China The highest SAR value for the device as reported to worn on the body, as described in this user guide, is 1.2W/kg
(Body-worn measurements differ among devices, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/
fccid after searching on FCC ID: 2AH25T6920. For body worn operation, this device has been tested and meets the FCC RF exposure . List of packaged items Terminal device 1 User's Guide 1 Charger & Adapter 1 USB Cable 1 Smart POS system T6920 Product Description 1 Extremely easy settings Opening handle Camera Type-C USB SIM Card Slot Nano SIM Speaker Extended interface Printer Power key Volume key
+
-
Only a few steps to activate an intelligent business device Set 2G/3G/4G: when power off, insert the 2G/3G/4G card and then power on.
(Refer to the Technical Specifications for the support of cards) Long press the Power Key for 2~3s to activate the backlight of screen,and then operate following the prompts after entering the startup/booting screen for the first time. 2 modes for accessing the Internet are available. Set WiFi Click "Set" button, activate "WLAN" to enter the WLAN searching screen, and wait it to list all useable WLAN Click the WLAN to be connected, and enter the access password in case of an encrypted network. Download/use Apps After connected to the Internet, open the App Market, find, download and install the Apps. FAQ Booting failure (e.g. low battery) Plug the USB cable and charge for 3min;
Check if the screen displays the normal charging status. System crash Long press the Power Key for 11s to reboot. Read the installed Help App for more information 3 2 Printing instructions This device supports 58mm thermal paper with the specifications of 570.5mm*50mm Please open the paper container with the uncovering handle
(as shown in Fig.1). Please do not force open the paper container to avoid print head gear wear;
Feed the paper correctly into the paper container in the direction as shown, and pull some paper outside the cutter
(as shown in Fig.2);
Close the cover of the paper container to finish printing paper feeding(as shown in Fig.3). Note: If the printed paper is blank, please check whether the paper roll has been installed in the correct direction. Battery cover Type-C USB Camera For payment scanning and 1D/2D code quick scanning. SIM Card Slot Note: To prevent system errors, please make sure the device is turned off when you insert or remove the SIM card. Power key Short press: wake up the screen, lock the screen. Long press: long press for 2-3 seconds in power off mode to switch on the device. Long press for 2-3 seconds in normal operation mode to select power off or reboot. Long press for 11 seconds when system is frozenfor automatic reboot. Volume key Volume adjustment. Printer For printing sales slips in power on mode. Type-C USB For device recharging and developer debugging. Charger & Adapter Power Outlet Instructions for recharging and battery This device supports charging only by USB cable Connect the 5V adapter to the power supply socket;
Connect the USB cable to the USB interface of the device for recharging; The screen will display the recharging icon during the recharging process;
If the recharging icon does not appear, please check whether the USB interface is well connected. Instructions/Notes for battery This device adopts 7.6V/2580mAh lithium battery;
please do not disassemble the battery. In order to protect the battery life, we recommend that yourecharge the device whenever possible, and please do not allow the battery to fully drain before recharging. Precautions Safety Warning Connect the AC plug to the AC socket corresponding to the marked input of the power adapter;
Do not use in the presence of any potentially explosive gas;
To avoid injury, unauthorized persons shall not open the power adapter; This is a Class A product. This product may cause radio interference in living environments. In that case, the user may be required to take adequate measures against interference. Battery replacement:
1. Explosion danger may arise if replacing with the wrong battery!
2. The replaced battery shall be disposed of by maintenance personnel,and please do not throw it into fire!
Significant Safety Instructions This terminal is a handheld device, and the user shall protect the password from being peered at by others while entering the password;
Do not install or use the device during lightning storms to avoid the potential risks of lightning shock;
Please turn off the power immediately if you notice abnormal odor, heat or smoke;
The paper cutter is sharp, please do not touch!
Suggestions Do not use the terminal near water or moisture to prevent liquid from falling into the terminal;
Do not use the terminal in extremely cold or hot environments, such as near flames or lit cigarettes;
Do not drop, throw or bend the device;
Use the terminal in a clean and dust-free environment if possible to prevent small items from falling into the terminal;
Please do not use the terminal near medical equipment without permission. Statements The Company does not assume responsibilities for the following actions:
Damages caused by use and maintenance without complying with the conditions specified in this guide;
The Company will not assume any responsibilities for the damages or problemscaused by optional items or consumables (rather than the initial products or approvedproducts of the Company). The customer is not entitled to change or modify the product without our consent. The products operating system supports official systemupdates, but if you change the operating system into a third party ROM system or alter the system files by system cracking, it may cause system instability and security risks and threats. Disclaimer As a result of product upgrading, some details in this document may not match the product, and the actual product shall govern. The Company reserves the right of interpretation of this document. The Company also reserves the right toalter this specification without prior notice.