Printer Magnetic card reader USB interface Open handle NFC reader Indicator light Power button Volume buttons IC card reader Flash light Speaker Strap ring Camera Extend pins SAM card slot SIM card slot SIM Battery Battery cover Return button Home button Menu button Power button Short Press:
Wake up the screen, lock the screen. Long Press:
Long press for 2-3 seconds in power o mode switches on the device. Long press for 2-3 seconds in normal operation mode selects power o or reboot. Long press for 11 seconds when system is frozen automati cally reboots. Volume buttons Volume adjusts. These buttons can be set as quick scan button by app setting. Printer For printing sales slips in power on mode. Return button Tap to return to the previous screen. Home button Tap to quickly go back home screen. Menu button Tap to quickly view the background apps. Select the app and slide laterally to close. Magnetic card reader Read the magnetic stripe information of bank cards. IC card reader Read the chip-based band cards. NFC reader Read the contactless card information. Indicator light Remind the payment steps for band card. USB interface Use for charging or developer debugging. Camera 5M Auto Focus, 1D&2D scanner. Flash light For lighting in camera mode. SAM card slot For inserting encrypted SAM cards. SIM card slot Note: To prevent system errors, please make sure the device is o when you insert or remove the SIM card. Move the battery cover horizontally to open. Insert/remove SIM card in the direction as shown. Fasten the battery cover horizontally. Support GSM/CDMA/WCDMA/TDS CDMA/EVDO/LTE SIM card. Battery Avoid contacting with water, metal material and other electrically equipment while in use. Strap ring For xing handheld strap to prevent slippage. Extend pins To connect to dock.(Need to buy dock separately) USB interface Name and Content of Toxic or Harmful Substances in this Product Adapter Toxic or Harmful Substances or Elements Part Name Components of circuit board Printing paper supply socket Printing instructions This device support 58mm thermal paper with the specication of 570.5mm40mm Please open pater container with open handle, as shown in Fig.1. Please dont open directly to damage print gear. Put the paper correctly into the pater container as shown and pull some paper outside the cutter, as shown in Fig.2. Close the cover of pater container to nish print paper feeding, as shown in Fig.3. Note: If the printed paper is blank, please check whether the paper roll has been installed wrong. Ultra-simple setting Only a few steps to start the smart business device 2G/3G/4G settings, in the power-o status, insert related 2G(GSM/CD-
MA)/3G(WCDMA/TDS CDMA/EVDO)/4G(LTE) SIM card and then power it on.
(For card support details, please read the technical specication table) Long-press the power button for 2 to 3 seconds, and then the screen is lightened. Enter the rst power-on interface and just operate according to instructions. The device provides two Internet accessing modes for selection. WIFI setting interface, and wait for its search for accessible WLAN hotspots and the result;
network, you need to enter the access code to connect. Click on the WLAN you want to connect to. If you select an encrypted Click the [setting] button, then enable WLAN, enter the WLAN search How to download/un-install applications In the networked mode, open the application market, browse and download applications to complete the installation of related applications. Software uninstall method: select "Settings-> Applications-> Manage Applications-> Uninstall" to uninstall the application; or long press the icon to drag it to the trash to uninstall. Instructions for charging and battery This device supports charging by USB cable or dock. Connect the 5V adapter to the power supply socket. Connect the USB cable to USB interface of the device. The screen will display charging icon during charging. Please check the USB connect if there is no charging icon. Instructions/Notes for battery This device adopts 3.6V/5200mAh Lithium battery, please dont remove the battery. In order to protect the battery life, please charge your device whenever possible and dont let battery to fully drain before charging. Trouble shooting Printer not working Make sure the cover of paper container is closed correctly. Make sure the right printing pater is used and fed. Check whether 58mm 40mm thermal paper roll is fed into the paper container. If the printed paper is blank, please check whether the paper roll has been installed in the correct direction. The device cant be power on(eg, exhausted battery). Connect the device properly with a USB cable to charge for three minutes. Check whether the charging icon is displayed or not. What we can do if the system freezes Press the power button for 11 seconds to reboot. Please read Help App in the device for more information on users guidance Lead Pb Mercury
(Hg) Cadmium
(Cd) Hexavalent chromium
(Cr(VII) Polybrominated biphenyls
(PBB) Polybrominated diphenyl ethers
(PBDE) Means that the content of the toxic or harmful substance in all homogeneous materials of this part is below the limit stipulated in SJ/T11363-2006. Means that the content of the toxic or harmful substance in at least one of the homogeneous materials of this part is beyond the limit stipulated in SJ/T11363-2006; but as for the component marked with on the table, the content is beyond the l imit since there is no alternative mature technology in the industry yet. The products reaching or exceeding the environmental service life shall be recycled per Regulations on the Control and Management of Electronic Information Products and shall not be littered. Precautions Product technical specications Safety Warning Insert the AC plug into the AC socket-outlet corresponding to the identication input on the accessory power adapter;
It must not be used where there is any potential explosive gas;
This is a Class A product. In a living environment, this prod uct may cause radio interference. In this case, the user may need to take practical measures against the interference. bout battery replacement:
There is a risk of explosion if you replace the battery with a wrong type!
The replaced battery shall be handed over to repair per sonnel disposal. Do not throw it into the re!
Important Safety Instructions Try not to install or use the device during lightning, or else there would be lightning stroke danger;
When you nd unusual smell, overheat or smoke, please cut o the power immediately;
Be cautious of the sharp paper knife, and please do not touch!
Suggestions Do not use it in extremely cold or hot conditions (e.g., near re or a lighted cigarette);
Do not drop, throw or bend it;
Try to use it in a clean and dustless environment and avoid tiny articles falling into the terminal;
Do not use it near medical equipment without permission. Declaration The company shall not be responsible for the following actions Any damage caused by not using and maintaining it under the conditions described in the guide;
Any damage or problem caused by optional parts or con sumptive materials (not the original products provided by the company or approved products), the company will assume no responsibility for this. It is not allowed to modify or change the product without the consent of the company. The operating system of this product supports ocial system update. If users install ROM system from the third party or modify the system les by means of cracking, it may lead to system instability, as well as security risk and security threat. Disclaimer Owing to the update of the product, some details of this docu-
ment may not be in conformity with those of the product. Please refer to the material object. The company reserves the right to interpret this document. The company reserves the right to modify this instruction book without prior notice. Item Technical Specications Operating system CPU CPU basic frequency RAM FLASH Display Android 6.0 MTK 6737 Quad-core 1.3GHz 1GB LPDDR3 8GB Nand Flash 5.5 inch IPS, resolution 1280*720 Touch screen Capacitive multi-touch screen, supportive of the glove mode Camera 500W AF Wireless data 2GB2/B3/B5/B8 3Gwcdma(B1/B2/B4/B5);EVDO(BC0/BC1) 4GB2/B4/B7/B17/B28 Wi-Fi Build-in WIFI 802.11 a/b/g/n2.4G/5G Bluetooth Support of bluetooth 3.0/4.0BLE and iBeacon Keys Power key, volume key, Interfaces USB Type CSIMPSAMUSB OTG Printer type Thermal Printer Printer paper spec Magnetic card reader Width 58mm, maximum diameter 40mm Track 1/2/3, Bi-directional, ISO7810/7811/7813 IC card reader ISO7816\EMV2000\PBOC3.0 SAM Slot ISO7816 Contactless card reader ISO 1443A/B Battery 3.6V/5200mAh Outline dimensions Adapter L211 mm W83 mm H54 mm OUTPUTDC5V/2A INPUTAC100~240V/0.3A 50/60Hz Package content One host One user guide (including package content, product warranty card and product qualication certicate) One power adapter One USB cable This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AH25W6900 NOTE: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help. Body-worn Operation This device was tested for typical body-worn operations. To comply With RF exposure requirements, a minimum separation distance of 1.0cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Specic Absorption Rate (SAR) information:
This wireless phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientic organizations through periodic and thorough evaluation of scientic studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement. The SAR limit of USA
(FCC) is 1.6W/kg averaged over one gram of tissue. Device types: W6900 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certica-
tion when properly worn on the body is 1.856W/kg10gSAR test distance0mmlimit 4W/kgand 1.477W/kg (1gSAR test distance 5mmlimit 1.6W/kg). This device was tested for body-worn operations with the back of the handset kept 0mm and 5mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm and 5mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Technical features and characteristic the product includes the following features and characteristics Operation Frequency Transmitted GSM850 GSM1900 824MHz-849MHz 33dBm 1850MHz-1910MHz 29dBm WCDMA bandII 1850MHz-1910MHz 21.5dBm WCDMA bandIV 1710MHz-1755MHz 22.5dBm WCDMA bandV 824MHz-849MHz 22.5dBm LTE Band 2 1850MHz-1910MHz 23.5dBm LTE Band 4 LTE Band 7 1710MHz-1755MHz 23.5dBm 2500MHz-2570MHz 21.5dBm LTE Band 17 704MHz-716MHz 23.5dBm CDMA BC0 CDMA BC1 824MHz-849MHz 22dBm 1850MHz-1910MHz 21.5dBm BT BLE wi 2402MHz-2480MHz 6dBm 2402MHz-2480MHz
-1dBm 2412MHz-2462MHz 18dBm 5150MHz-5250MHz 5250MHz-5350MHz 5725MHz-5850MHz 18.5dBm Smart POS System Users Guide Manufacture Room 505 No.388 Song Hu Road Shanghai, China