FCC ID: 2AH25V2 Wireless data POS System(T5930)

Technical specifications Item Technical Specifications Operating system CPU frequency RAM FLASH Display SUNMI OS 2.0 (based on Android 7.1) 1.3 GHz Quad Core 1GB LPDDR3 8GB Nand Flash 5.45 inch IPS, resolution 1440720 Touch screen Capacitive Screen Camera 5M AF / 0.3M FF optional Wireless data 2GB2/B3/B5/B8 3GWCDMA(B1/B2/B4/B5) 4GB2/B3/B4/B7/B17/B28 Wi-Fi Build-in Wi-Fi 802.11a/b/g/n(2.4G/5G) Bluetooth Support Bluetooth 4.0 Keys Power key, volume key Interfaces USB Type C Nano SIM Printer type Printing paper specifications Battery Outline dimensions Adapter Thermal Printer Width 58mm, maximum diameter 50mm 7.6V/2580mAh L 219.1mm W 80mm H 17.8mm OUTPUTDC5V/2A INPUTAC100~240V/0.3A 50/60Hz the handset kept 10mm and 5mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm and 5mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Technical features and characteristic Transmitted Operation Frequency GSM 850 GSM 1900 WCDMA BAND II WCDMA BAND IV WCDMA BAND V LTE BAND 2 LTE BAND 4 LTE BAND 7 LTE BAND 17 2.4G Wi-Fi Bluetooth BLE 5G Wi-Fi 5G Wi-Fi 824-849 MHz(Tx),869-894 MHz(Rx) 1850-1910 MHz(Tx),1930-1990 MHz(Rx) 1850-1910 MHz(Tx),1930-1990 MHz(Rx) 32 dBm 30 dBm 23 dBm 1710 -1755 MHz(Tx),2110 - 2155MHz(Rx) 23 dBm 824-849 MHz(Tx),869-894 MHz(Rx) 1850-1910 MHz(Tx),1930-1990 MHz(Rx) 1710-1755 MHz(Tx),2110-2155 MHz(Rx) 2500-2570 MHz(Tx),2620-2690 MHz(Rx) 704-716 MHz(Tx),734-746 MHz(Rx) 2412-2462 MHz 2402-2480 MHz 2402-2480 MHz 5150-5250 MHz 5725-5850 MHz 23.5 dBm 22.5 dBm 22.5 dBm 22.5 dBm 23 dBm 15 dBm 6 dBm 6 dBm 17 dBm 16.5 dBm This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AH25V2 NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and receiver.

---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

---Consult the dealer or an experienced radio/TV technician for help. Body-worn Operation This device was tested for typical body-worn operations. To comply With RF exposure requirements, a minimum separation distance of 1.0cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Specific Absorption Rate (SAR) information:

This wireless phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement. The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. Device types: T5930 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 1.856W/kg10gSAR test distance10mmlimit 4W/kgand 1.276W/kg (1gSAR test distance10mmlimit 1.6W/kg). This device was tested for body-worn operations with the back of Name and content of toxic and harmful substances contained in this product are shown in the following table Toxic and harmful substances and elements

(Pb)

(Hg)

(Cd)

(Cr(VII)

(PBB)

(PBDE) Name of parts Circuit board Shell

:It indicates that the content of toxic and harmful substances in all homogeneous materials of this part is below the limit specified in SJ/T11363-2006.

:It indicates that the content of toxic and harmful substances is higher than the limit specified in SJ/T11363-2006 in at least one homogeneous material of this part; however, the the reason why the toxic substance of that part exceeds the limit is that there is no applicable material to replace it currently. For products that have reached or passed the service years for environmental protection, they should be recycled according to Measures for Control and Management of Electronic Information Products and should not be thrown away at will. This product can be used across EU member states. The full text of the EU declaration DOC is available at the following internet addresswww.sunmi.com Manufacture Shanghai Sunmi Technology Co.,Ltd. Room 505 No.388 Song Hu Road Shanghai, China List of packaged items Terminal device 1 User's Guide 1 Charger & Adapter 1 USB Cable 1 User Guide T 5 9 3 0 Product Description 1 Extremely easy settings Opening handle Camera Type-C USB SIM Card Slot Nano SIM Speaker Extended interface Printer Power key Volume key

+

-

Only a few steps to activate an intelligent business device Set 2G/3G/4G: when power off, insert the 2G/3G/4G card and then power on.

(Refer to the Technical Specifications for the support of cards) Long press the Power Key for 2~3s to activate the backlight of screen,and then operate following the prompts after entering the startup/booting screen for the first time. 2 modes for accessing the Internet are available. Set WiFi Click "Set" button, activate "WLAN" to enter the WLAN searching screen, and wait it to list all useable WLAN hot spots;

Click the WLAN to be connected, and enter the access password in case of an encrypted network. Download/use Apps After connected to the Internet, open the App Market, find, download and install the Apps. FAQ Booting failure (e.g. low battery) Plug the USB cable and charge for 3min;

Check if the screen displays the normal charging status. System crash Long press the Power Key for 11s to reboot. Read the installed Help App for more information 3 2 Printing instructions This device supports 58mm thermal paper with the specifications of 570.5mm*50mm Please open the paper container with the uncovering handle

(as shown in Fig.1). Please do not force open the paper container to avoid print head gear wear;

Feed the paper correctly into the paper container in the direction as shown, and pull some paper outside the cutter

(as shown in Fig.2);

Close the cover of the paper container to finish printing paper feeding(as shown in Fig.3). Note: If the printed paper is blank, please check whether the paper roll has been installed in the correct direction. Battery cover Type-C USB Camera For payment scanning and 1D/2D code quick scanning. SIM Card Slot Note: To prevent system errors, please make sure the device is turned off when you insert or remove the SIM card. Power key Short press: wake up the screen, lock the screen. Long press: long press for 2-3 seconds in power off mode to switch on the device. Long press for 2-3 seconds in normal operation mode to select power off or reboot. Long press for 11 seconds when system is frozenfor automatic reboot. Volume key Volume adjustment. Printer For printing sales slips in power on mode. Type-C USB For device recharging and developer debugging. Charger & Adapter Power Outlet Instructions for recharging and battery This device supports charging only by USB cable Connect the 5V adapter to the power supply socket;

Connect the USB cable to the USB interface of the device for recharging; The screen will display the recharging icon during the recharging process;

If the recharging icon does not appear, please check whether the USB interface is well connected. Instructions/Notes for battery This device adopts 7.6V/2580mAh lithium battery;

please do not disassemble the battery. In order to protect the battery life, we recommend that yourecharge the device whenever possible, and please do not allow the battery to fully drain before recharging. Precautions Safety Warning Connect the AC plug to the AC socket corresponding to the marked input of the power adapter;

Do not use in the presence of any potentially explosive gas;

To avoid injury, unauthorized persons shall not open the power adapter; This is a Class A product. This product may cause radio interference in living environments. In that case, the user may be required to take adequate measures against interference. Battery replacement:

1. Explosion danger may arise if replacing with the wrong battery!

2. The replaced battery shall be disposed of by maintenance personnel,and please do not throw it into fire!

Significant Safety Instructions This terminal is a handheld device, and the user shall protect the password from being peered at by others while entering the password;

Do not install or use the device during lightning storms to avoid the potential risks of lightning shock;

Please turn off the power immediately if you notice abnormal odor, heat or smoke;

The paper cutter is sharp, please do not touch!

Suggestions Do not use the terminal near water or moisture to prevent liquid from falling into the terminal;

Do not use the terminal in extremely cold or hot environments, such as near flames or lit cigarettes;

Do not drop, throw or bend the device;

Use the terminal in a clean and dust-free environment if possible to prevent small items from falling into the terminal;

Please do not use the terminal near medical equipment without permission. Statements The Company does not assume responsibilities for the following actions:

Damages caused by use and maintenance without complying with the conditions specified in this guide;

The Company will not assume any responsibilities for the damages or problemscaused by optional items or consumables (rather than the initial products or approvedproducts of the Company). The customer is not entitled to change or modify the product without our consent. The products operating system supports official systemupdates, but if you change the operating system into a third party ROM system or alter the system files by system cracking, it may cause system instability and security risks and threats. Disclaimer As a result of product upgrading, some details in this document may not match the product, and the actual product shall govern. The Company reserves the right of interpretation of this document. The Company also reserves the right toalter this specification without prior notice.

Technical specifications Item Technical Specifications Operating system CPU frequency RAM FLASH Display SUNMI OS 2.0 (based on Android 7.1) 1.3 GHz Quad Core 1GB LPDDR3 8GB Nand Flash 5.45 inch IPS, resolution 1440720 Touch screen Capacitive Screen Camera 5M AF / 0.3M FF optional Wireless data 2GB2/B3/B5/B8 3GWCDMA(B1/B2/B4/B5) 4GB2/B3/B4/B7/B17/B28 Wi-Fi Build-in Wi-Fi 802.11a/b/g/n(2.4G/5G) Bluetooth Support Bluetooth 4.0 Keys Power key, volume key Interfaces USB Type C Nano SIM Printer type Printing paper specifications Battery Outline dimensions Adapter Thermal Printer Width 58mm, maximum diameter 50mm 7.6V/2580mAh L 219.1mm W 80mm H 17.8mm OUTPUTDC5V/2A INPUTAC100~240V/0.3A 50/60Hz device was tested for body-worn operations with the back of the handset kept 10mm and 5mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm and 5mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Technical features and characteristic Transmitted Operation Frequency GSM 850 GSM 1900 824-849 MHz(Tx),869-894 MHz(Rx) 1850-1910 MHz(Tx),1930-1990 MHz(Rx) WCDMA BAND II 1850-1910 MHz(Tx),1930-1990 MHz(Rx) 32 dBm 30 dBm 23 dBm WCDMA BAND IV 1710 -1755 MHz(Tx),2110 - 2155MHz(Rx) 23 dBm WCDMA BAND V 824-849 MHz(Tx),869-894 MHz(Rx) 23.5 dBm LTE BAND 2 LTE BAND 4 LTE BAND 7 1850-1910 MHz(Tx),1930-1990 MHz(Rx) 22.5 dBm 1710-1755 MHz(Tx),2110-2155 MHz(Rx) 22.5 dBm 2500-2570 MHz(Tx),2620-2690 MHz(Rx) 22.5 dBm LTE BAND 17 704-716 MHz(Tx),734-746 MHz(Rx) 2.4G Wi-Fi Bluetooth BLE 5G Wi-Fi 5G Wi-Fi 2412-2462 MHz 2402-2480 MHz 2402-2480 MHz 5150-5250 MHz 5725-5850 MHz 23 dBm 15 dBm 6 dBm 6 dBm 17 dBm 16.5 dBm This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AH25V2 NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and receiver.

---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

---Consult the dealer or an experienced radio/TV technician for help. Body-worn Operation This device was tested for typical body-worn operations. To comply With RF exposure requirements, a minimum separation distance of 1.0cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Specific Absorption Rate (SAR) information:

This wireless data POS System meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement. The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. Device types: T5930 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 0.949W/kg10gSAR test distance0mmlimit 4W/kgand 0.983W/kg (1gSAR test distance5mmlimit 1.6W/kg). This Name and content of toxic and harmful substances contained in this product are shown in the following table Toxic and harmful substances and elements

(Pb)

(Hg)

(Cd)

(Cr(VII)

(PBB)

(PBDE) Name of parts Circuit board Shell

:It indicates that the content of toxic and harmful substances in all homogeneous materials of this part is below the limit specified in SJ/T11363-2006.

:It indicates that the content of toxic and harmful substances is higher than the limit specified in SJ/T11363-2006 in at least one homogeneous material of this part; however, the the reason why the toxic substance of that part exceeds the limit is that there is no applicable material to replace it currently. For products that have reached or passed the service years for environmental protection, they should be recycled according to Measures for Control and Management of Electronic Information Products and should not be thrown away at will. This product can be used across EU member states. The full text of the EU declaration DOC is available at the following internet addresswww.sunmi.com Manufacture Shanghai Sunmi Technology Co.,Ltd. Room 505 No.388 Song Hu Road Shanghai, China List of packaged items Terminal device 1 User's Guide 1 Charger & Adapter 1 USB Cable 1 User Guide T 5 9 3 0 Product Description 1 Extremely easy settings Opening handle Camera Type-C USB SIM Card Slot Nano SIM Speaker Extended interface Printer Power key Volume key

+

-

Only a few steps to activate an intelligent business device Set 2G/3G/4G: when power off, insert the 2G/3G/4G card and then power on.

(Refer to the Technical Specifications for the support of cards) Long press the Power Key for 2~3s to activate the backlight of screen,and then operate following the prompts after entering the startup/booting screen for the first time. 2 modes for accessing the Internet are available. Set WiFi Click "Set" button, activate "WLAN" to enter the WLAN searching screen, and wait it to list all useable WLAN hot spots;

Click the WLAN to be connected, and enter the access password in case of an encrypted network. Download/use Apps After connected to the Internet, open the App Market, find, download and install the Apps. FAQ Booting failure (e.g. low battery) Plug the USB cable and charge for 3min;

Check if the screen displays the normal charging status. System crash Long press the Power Key for 11s to reboot. Read the installed Help App for more information 3 2 Printing instructions This device supports 58mm thermal paper with the specifications of 570.5mm*50mm Please open the paper container with the uncovering handle

(as shown in Fig.1). Please do not force open the paper container to avoid print head gear wear;

Feed the paper correctly into the paper container in the direction as shown, and pull some paper outside the cutter

(as shown in Fig.2);

Close the cover of the paper container to finish printing paper feeding(as shown in Fig.3). Note: If the printed paper is blank, please check whether the paper roll has been installed in the correct direction. Battery cover Type-C USB Camera For payment scanning and 1D/2D code quick scanning. SIM Card Slot Note: To prevent system errors, please make sure the device is turned off when you insert or remove the SIM card. Power key Short press: wake up the screen, lock the screen. Long press: long press for 2-3 seconds in power off mode to switch on the device. Long press for 2-3 seconds in normal operation mode to select power off or reboot. Long press for 11 seconds when system is frozenfor automatic reboot. Volume key Volume adjustment. Printer For printing sales slips in power on mode. Type-C USB For device recharging and developer debugging. Charger & Adapter Power Outlet Instructions for recharging and battery This device supports charging only by USB cable Connect the 5V adapter to the power supply socket;

Connect the USB cable to the USB interface of the device for recharging; The screen will display the recharging icon during the recharging process;

If the recharging icon does not appear, please check whether the USB interface is well connected. Instructions/Notes for battery This device adopts 7.6V/2580mAh lithium battery;

please do not disassemble the battery. In order to protect the battery life, we recommend that yourecharge the device whenever possible, and please do not allow the battery to fully drain before recharging. Precautions Safety Warning Connect the AC plug to the AC socket corresponding to the marked input of the power adapter;

Do not use in the presence of any potentially explosive gas;

To avoid injury, unauthorized persons shall not open the power adapter; This is a Class A product. This product may cause radio interference in living environments. In that case, the user may be required to take adequate measures against interference. Battery replacement:

1. Explosion danger may arise if replacing with the wrong battery!

2. The replaced battery shall be disposed of by maintenance personnel,and please do not throw it into fire!

Significant Safety Instructions This terminal is a handheld device, and the user shall protect the password from being peered at by others while entering the password;

Do not install or use the device during lightning storms to avoid the potential risks of lightning shock;

Please turn off the power immediately if you notice abnormal odor, heat or smoke;

The paper cutter is sharp, please do not touch!

Suggestions Do not use the terminal near water or moisture to prevent liquid from falling into the terminal;

Do not use the terminal in extremely cold or hot environments, such as near flames or lit cigarettes;

Do not drop, throw or bend the device;

Use the terminal in a clean and dust-free environment if possible to prevent small items from falling into the terminal;

Please do not use the terminal near medical equipment without permission. Statements The Company does not assume responsibilities for the following actions:

Damages caused by use and maintenance without complying with the conditions specified in this guide;

The Company will not assume any responsibilities for the damages or problemscaused by optional items or consumables (rather than the initial products or approvedproducts of the Company). The customer is not entitled to change or modify the product without our consent. The products operating system supports official systemupdates, but if you change the operating system into a third party ROM system or alter the system files by system cracking, it may cause system instability and security risks and threats. Disclaimer As a result of product upgrading, some details in this document may not match the product, and the actual product shall govern. The Company reserves the right of interpretation of this document. The Company also reserves the right toalter this specification without prior notice.

1 2 3 5 6 7 1 BaseService ()

() OTA

4 3 2

:Ex ic IIB T6 Gc

:CCRI 19.2121 1 2 2-3 2-3 11 3 4 Type-C 5 6 A

() ROM

() 7 Nano SIM Nano SIM

(Pb(Hg) (Cd) (Cr(VI) (PBB) (PBDE) 58mm 570.5mm50mm

() SJ/T11363-2006 X SJ/T11363-2006 3887505 2 0 _ S E _ S U _ U E _ N C _ 0 3 9 5 T QUICK START GUIDE T 5 9 3 0 Quick start Notices 1 2 3 4 5 6 7 Printer For printing sales slips in power on mode. Power button Short press: wake up the screen, lock the screen. Long press: long press for 2-3 seconds in power off mode to switch on the device. Long press for 2-3 seconds in normal operation mode to select power off or reboot. Long press for 11 seconds when system is frozenfor automatic reboot. Volume key Volume adjustment. Type-C USB For device recharging and developer debugging. Camera For payment scanning and 1D/2D code quick scanning. Extended interface Used to connect the base (this accessory needs to be purchased separately). SIM Card Slot Note: To prevent system errors, please make sure the device is turned off when you insert or remove the SIM card. Printing instructions 570.5mm*50mm. This device supports 58mm thermal paper with the specifications of Please open the paper container with the uncovering handl Please do not force open the paper container to avoid print head Feed the paper correctly into the paper container in the direction as shown, and pull some paper outside the cutter;

Close the cover of the paper container to finish printing paper gear wear;

feeding. Note: If the printed paper is blank, please check whether the paper roll has been installed in the correct direction. Table for Names and Content Identification of Toxic and Hazardous Substances in this Product Part Name Toxic or Hazardous Substances and Elements Pb Hg Cd Cr(VI) PBB PBDE DEHP DBP BBP DIBP Circuit Board Component Structural Component Packaging Component indicates that the content of the toxic and hazardous substance in all homogeneous materials of the component is below the limit specified in SJ/T 11363-2006. indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the component exceeds the limit stipulated in SJ/T 11363-2006. However, as for the reason, because there is no mature and replaceable technology in the industry at present. The products that have reached or exceeded environmental protection service life should be recycled and reused according to the Regulations on Control and Management of Electronic Information Products, and should not be discarded randomly. Safety Warning Connect the AC plug to the AC socket corresponding to the marked input of the power adapter;

To avoid injury, unauthorized persons shall not open the power adapter;

This is a Class A product. This product may cause radio interference in living environments. In that case, the user may be required to take adequate measures against interference. Battery replacement:

1.Explosion danger may arise if replacing with the wrong battery!

2.The replaced battery shall be disposed of by maintenance personnel, and please do not throw it into fire!

Significant Safety Instructions Do not install or use the device during lightning storms to avoid the potential risks of lightning shock;

Please turn off the power immediately if you notice abnormal odor, heat or smoke;

The paper cutter is sharp, please do not touch!

Suggestions Do not use the terminal near water or moisture to prevent liquid from falling into the terminal;

Do not use the terminal in extremely cold or hot environments, such as near flames or lit cigarettes;

Do not drop, throw or bend the device;

Use the terminal in a clean and dust-free environment if possible to prevent small items from falling into the terminal;

Please do not use the terminal near medical equipment without permission. Statements The Company does not assume responsibilities for the following actions:

Damages caused by use and maintenance without complying with the conditions specified in this guide;

The Company will not assume any responsibilities for the damages or problemscaused by optional items or consumables (rather than the initial products or approvedproducts of the Company). The customer is not entitled to change or modify the product without our consent. The products operating system supports official systemupdates, but if you change the operating system into a third party ROM system or alter the system files by system cracking, it may cause system instability and security risks and threats. Disclaimer As a result of product upgrading, some details in this document may not match the product, and the actual product shall govern. The Company reserves the right of interpretation of this document. The Company also reserves the right toalter this specification without prior notice. Descripcin del Producto 1 Impresora 2 Botn de encendido prolongada- mente:

para encender;

o reiniciar el aparato;

automticamente. 3 Botn de volumen Ajuste el nivel del volumen 4 Puerto Tipo-C desarrolladores. 5 Cmara Extensible Interface separado). Ranura para tarjeta SIM Se utiliza para imprimir documentos cuando est encendido. Pulse brevemente: Para encender y bloquear la pantalla. Pulse Cuando est apagado, pulse prolongadamente durante 2-3 segundos Durante su uso, mantenga pulsado durante 2-3 segundos, para apagar En estado muerto, pulse durante 11 segundos y se reiniciar Se puede utilizar para cargar el dispositivo y para depurar Puede tomar fotos y escaneo rpido de los cdigos de barras 1D/2D. 6 Para conectar la base (este accesorio necesita ser adquirido por 7 Nota: Cuando inserte o extraiga la tarjeta Nano SIM, asegrese de dejar el aparato apagado, ya que al enchufar y desenchufar en el estado de encendido podra causar un fallo en el aparato. Instrucciones para imprimir Este aparato se puede usar papel trmico de 58mm, especifica- ciones:

570.5mm50mm Abra el compartimiento del papel de la impresora (ilustrado en la figura1) no lo abra con fuerza para evitar el desgaste de la rueda dentada de la impresora; Coloque el papel en el compartimiento del papel parte del papel fuera del cuchillo (Ilustrado en la figura2);

Cierre la tapa del compartimiento de papel para terminar de instalar

(ilustrado en la figura3). orientacin del rollo de papel est o no invertido. CE certification information (SAR) This device was tested for typical body-worn operations with the back of the handset kept 5mm away. To maintain compliance with RF exposure requirements, use accessories that maintain a 5mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided. If you are using pacemaker, hearing aid, cochlear implant or other device, please use the phone according to the doctors advice. PRODUCT SAFETY WARNINGS Use responsibly. Read all instructions and safety information before use to avoid injury.The limit operating ambient temperature of the equipment declared by the manufacturer is -15~55C Battery safety Charge battery only at ambient temperatures ranging from 40C.

(1) CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type of battery recommended by the manufacturer. Dispose of used batteries according to battery manufacturers instructions.

(2) CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

(3) CAUTION:Battery charging temperature upper limit is 40C. Adapter safety When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 0C~40C. For altitude 2km below use only Wi-Fi Safety Turn Wi-Fi off in areas where Wi-Fi use is prohibited or when it may cause interference or danger, such as in airplanes while flying. Declaration of Conformity Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the Wireless data POS System(Model No.:T5930) is in compliance with the essential requirements and other relevant provisions of RED 2014/53/EU. CAUTION: The device is restricted to indoor use when operated in the European Community using frequency in 5150MHz~5250MHz to reduce the potential for interference. 5.8G SRD receiver category1 Operation Frequency Transmitted GSM 900 880.0915.0MHz(TX), 925.0960.0MHz(RX) 32.5dBm WCDMA Band I 1920-1980MHz (TX), 2110-2170MHz (RX) WCDMA Band VIII 880-915MHz (TX), 925-960MHz (RX) LTE BAND 1 1920-1980MHz (TX), 2110-2170MHz (RX) LTE BAND 3 1710-1785 MHz (TX), 1805-1880MHz (RX) LTE BAND 7 2500-2570MHz(TX), 2620-2690MHz(RX) LTE BAND 8 880-915MHz(TX) , 925-960MHz(RX) LTE BAND 20 832-862MHz(TX),791-821MHz(RX) LTE BAND 38 2570-2620MHz (TX/RX) LTE BAND 40 2300-2400MHz (TX/RX) BT/BLE 2402MHz-2480MHz 2.4G Wi-Fi 2412MHz-2472MHz 5G Wi-Fi 5G Wi-Fi 5.15-5.35GHz 5.725-5.850GHz 21dBm 22.5dBm 22.5dBm 23dBm 23dBm 23dBm 22.5dBm 21.5dBm 22dBm 7dBm 15dBm 16.5dBm 13.5dBm This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AH25V2 NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and receiver.

---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

---Consult the dealer or an experienced radio/TV technician for help. Body-worn Operation This device was tested for typical body-worn operations. To comply With RF exposure requirements, a minimum separation distance of 1.0cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Specific Absorption Rate (SAR) information:

This wireless data POS System meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement. The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. Device types: T5930 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 1.042W/kg10gSAR test distance0mmlimit 4W/kgand 0.983W/kg (1gSAR test distance5mmlimit 1.6W/kg). This device was tested for body-worn operations with the back of the handset kept 10mm and 5mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm and 5mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Technical features and characteristic GSM 850 GSM 1900 824-849 MHz(Tx),869-894 MHz(Rx) 1850-1910 MHz(Tx),1930-1990 MHz(Rx) WCDMA BAND II 1850-1910 MHz(Tx),1930-1990 MHz(Rx) WCDMA BAND IV 1710 -1755 MHz(Tx),2110 - 2155MHz(Rx) 32 dBm 30 dBm 23 dBm 23 dBm WCDMA BAND V 824-849 MHz(Tx),869-894 MHz(Rx) 23.5 dBm LTE BAND 2 1850-1910 MHz(Tx),1930-1990 MHz(Rx) 22.5 dBm LTE BAND 4 1710-1755 MHz(Tx),2110-2155 MHz(Rx) 22.5 dBm LTE BAND 7 2500-2570 MHz(Tx),2620-2690 MHz(Rx) 22.5 dBm LTE BAND 17 704-716 MHz(Tx),734-746 MHz(Rx) 2.4G Wi-Fi Bluetooth BLE 5G Wi-Fi 5G Wi-Fi 2412-2462 MHz 2402-2480 MHz 2402-2480 MHz 5150-5250 MHz 5725-5850 MHz 23 dBm 15 dBm 6 dBm 6 dBm 17 dBm 16.5 dBm Manufacture Shanghai Sunmi Technology Co., Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China correctamente siguiendo la direccin indicada en la figura y extraiga una Technical features and characteristic Operation Frequency Transmitted Nota: Si el contenido impreso est en blanco, compruebe que la GSM 1800 1710.01785.0MHz (TX), 1805.01880.0 MHz (RX) 29.5dBm

R1mm 52mm 16mm R2mm A V1.0 V1.1 V1.2 IC V1.3 30mm 7mm 58mm R1mm 27mm

: T5930

: 5V 2A V2 CMIIT ID:2018CP9516 IMEI:1234567890123 SN:1234567890123

:Ex ic IIB T6 Gc

:CCRI 19.2121 Wireless data POS System V2 MODEL: T5930 INPUT: 5V 2A Shanghai Sunmi Technology Co., Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Made in China CCAP194G0080T2 R T 211-190118 AD190006211 IMEI:1234567890123 SN:1234567890123 Wireless data POS System V2 MODEL: T5930 INPUT: 5V 2A FCC ID2AH25V2 IC: 22621-V2 Shanghai Sunmi Technology Co., Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Made in China IMEI:1234567890123 SN:1234567890123 400-6666-509 4 0 0 B 400-6666-509 4 0 0 SN:1234567890123 SN Wireless data POS System V2 Made in China Wireless data POS System V2 Made in China Point of sale Terminal V2 MODEL: T5930 INPUT: 5V 2A IS 13252(Part 1):2010/

IEC 60950-1 : 2005 Shanghai Sunmi Technology Co., Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China R-41069531 www.bis.gov.in Made in China IMEI:1234567890123 SN:1234567890123 Point of sale Terminal V2 Made in China PET+()

& Arial 8mm 6.3mm

///() Arial 5.1mm 8.7mm 7mm 7mm 4.9mm m m 9

. 4 CCAP194G0080T2 6PT 5.9mm m m 6 R T 211-190118 AD190006211 4PT 9.5mm 7mm

() Arial

() Arial IS 13252(Part 1):2010/

IEC 60950-1 : 2005 6PT R-41104752 www.bis.gov.in 5.5mm 5.27mm

Request for Confidentiality Date: 2021/4/9 Subject: Confidentiality Request for: 2AH25V2 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent*

Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation BOM Schematics Test Setup Photos Users Manual

*Note: (Insert Explanation as Necessary) Shanghai Sunmi Technology Co.,Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of (specify number of days not to exceed 180)2 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TIMCO in the event information regarding the product or the product is made available to the public. TIMCO will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By:

(Signature/Title3) Zhang Wentang

(Print name) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Shanghai Sunmi Technology Co., Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2021/4/09 SUBJECT: FCC Application for 2AH25V2 To Whom It May Concern:

We, the undersigned, hereby authorize Lu Fang of Industrial Internet Innovation Center Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Industrial Internet Innovation Center Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,

(Must be signed by the person that is listed on the FCC Website) Signature

\\10.33.200.248\project\2021 \\C21T00009\\POA_Letter.docx

Differences between first source and second source We Shanghai Sunmi Technology Co.,Ltd. declare that our product Wireless data POS System Model Name: T5930, FCC ID: 2AH25V2 the difference between first source and second source is only the supplier:

first source second source Battery Veken Fenghua Company Chop: Shanghai Sunmi Technology Co.,Ltd. Authorized signature:

Date : 2021.2.3

Product Change Description As the applicant of the below model, [Shanghai Sunmi Technology Co.,Ltd. ] declares that the product, Model Name: T5930 Shanghai Sunmi Technology Co.,Ltd. HW: V3 SW: ZAP1522_769_DEV_dailybuild_20181205071714_userdebug_DCC is the variant of the initial certified product, Model Name: T5930 Shanghai Sunmi Technology Co.,Ltd. HW: V3 SW: ZAP1522_769_DEV_dailybuild_20181205071714_userdebug_DCC SOFTWARE MODIFICATIONS:

Protocol Stack changes: NO MMS/SUPL changes: NO STK/USAT changes: NO Browsing changes: NO Other changes detailed: NO HARDWARE MODIFICATION:

Band changes: NO Power Amplifier changes: NO Antenna changes: NO PCB Layout changes: NO Components on PCB changes: NO LCD changes: NO Speaker changes: NO Camera changes: NO Vibrator changes: NO Bluetooth changes: NO FM changes: NO Other changes: Changed the CPU model from MT6739V/WA to MT8765V/WA, which do not affect the RF parameters 1 MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: NO Mechanical shell changes: NO Other changes detailed: NO ACCESSORY MODIFICATIONS:

Battery changes: Yes, update label information Adaptor changes: Yes, update label information and change IC USB Cable Changes: Yes, Change to T05000189 and T05000156 Earphone changes: NO Standard MODIFICATIONS:

APPROVED BY Date:2021-2-4 Company: Shanghai Sunmi Technology Co.,Ltd. Address: Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Tel: +86 18721763396 2