SUNMI W5910 Statement The company is not responsible for the following behaviors:
Damages caused by using and maintaining the device without following the User Guide;
Damages or problems caused by selection of objects or Consumables (products which are not the initial ones provided or recognized by the company). In this case, the company will not undertake any responsibility. No one is entitled to modify or change the product unless permitted by the company. Disclaimer Discrepancies between the product and the le concerning detail s may raise due to product updates. Please be subject to the material object. The company reserves the right to interpret the le and the right to revise this manual withou t prior notices. Hazardous/Toxic Substances and Content Table of the Product Hazardous/Toxic Substances or Elements Lead Mercury Cadmium Hexavalent chromium Polybrominated biphenyls Polybrominated diphenyl ethers Pb
(Hg)
(Cd)
(Cr(VII)
(PBB)
(PBDE) Parts Name Circuit card assembly Indicates that the concentration of the hazardous substances in all homogeneous materials in the parts is below the relevant threshold of the SJ/T11363-2006. Indicates that the concentration of the hazardous substances of at least one of all homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006; However, the content of the parts marked with "" is above the standard due to the fact that there is not mature alternative technologies in the industry. Products reaching or beyond service life for environmental protection shall not be discarded anyhow but recycled as per the stipulations set out in the Control and Administrative Measures on Electronic Information Products. Contents of Package Body*1 User Guide*1 (including Contents of Package, Warranty Card and Product Certicate) Charging dock*1 Product technical index Warranty Card Conguration Main specications O/S CPU Android 5.1 MTK MT6580M CPU Frequency 1.3GHZ Quad Core RAM FLASH 512MB DDR2 4GB Nand Flash LCD Screen 4.5''TN,FWVGA 854*480 Touch screen Capacity Dual-point Touch screen Camera Speaker 200W FF Macro Single Track 1W,Volume Up to 90 DB(Adjustable Mircrophone 1xMIC,Acoustic Wave Payment Supported 3G WIFI GSM 900/1800/850/1900WCDMA 850/1900 WIFI 802.11b/g/n2.4G Bluebooth Bluetooth3.0/4.0IBEACON supported Button Interface Battery Dimension 1xpower button 1xscan button Micro USB Debug Port,SIM card slot,4 section headphone hole, charging thimble 3.7V/3000mAh Terminallength148mm*width73mm*height23mm Charging BaseLength104mm*Width74mm*Height 68mm Thimble Type Charging Base INPUTAC100~240V/1.5A 50/60Hz OUTPUTDC5V/1A Warranty Card Product Name:
Product Model:
Product No.:
Purchase Date:
Warranty Period: Warranty service by our company is available within ___ days upon purchasing. Free warranty is not provided in following conditions:
Products are disassembled and repaired without permission. Product barcode and fragile sticker are damaged, and the warranty card is obliterated or broken. Malfunction caused by operations without complying with requirements in the manual. Malfunction caused by water soaking or falling, and man-made damage like scratching or breaking. Malfunction or damage caused by force majeure. Beyond the warranty period. Contact Methods:
Business address:
Telephone number:
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. M1 User Guide FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the separation of 5 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AH25M1. For this device, the highest reported SAR value for usage near the body is 1.20 W/kg. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. Carry this device, at least 5 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 5 mm between this and your body. Power Button Volume Key Camera Horn Audio Jack MICRO USB Debugging Interface SIM SIM Card Slot SIMCardCover Mini-SIM Micro-SIM Nano-SIM Description of Charging and Battery The device supports docking station only. Charging by USB cable is unsupported Insert the dock adapter into the mains socket;
Mount the device onto the dock as per the direction in the gure;
Charging icon will be shown on the screen during charging;
Check the direction of the device onto the dock if no charging icon is shown. Battery description/notes The device uses 3.7 V / 3000mAh non-detach able built-in lithium battery. Do not remove it by yourself. Please charge the device at any time instead of after power-o so as to maintain the service life of the battery. Electric socket Charger adapter Charging Contact MIC Return Key Home Key Menu Key Charging Contact Power Button Short press: Wake up or lock the screen. Long press: Press the button for 2-3 seconds to start up the device in shutdown mode;
Press the button for 2-3 seconds to select shutdown or restart under normal service conditions. Press the button for 11 seconds to automatically restart the device when it crashes. Volume Key Adjust volume (the key can be also used for quick barcode scanning when supported by applications). Return Key Click it to return to the previous interface. Home Key Click it to return to home screen quickly. Audio Jack Available for externally connected audio/personal credit card POS (application required). MICRO USB Debugging Interface Applicable to developers' debugging only. Charging unsupported SIM Card Slot Note:This slot is for standard SIM card, please use the conversion for Micro-SIM card and Nano-SIM; Ensure the device is powered o when inserting or rem oving sim card. Inserting or removing card in power-on state may cause malfunction. Open SIM card cover. Insert/remove SIM card as instructed direc Covers tightly on vertical direction. (China Mobile/Unicom 2G and Unicom 3G SIM cards supported) tion in the gure;
are Camera Applicable to barcode scanning within close range (6cm-20cm) only. Menu Key Click it to view programs running in the background quickly; Select an App and slide towards one side to close it. Charging Contact Used for charging when contacting the dock. (Stay away from water, metal and other energized devices) Minimalism Design Only a few steps to start the smart commercial device . 2G/3G setting. Insert corresponding 2G (GSM)/3G (GSM) card in shutdown mode before starting the device. (See Technical Specications for de tails of card support) Press the power button for 2-3 seconds to wake up the screen, enter the interface of rst starting and operate as per instructions. 2 kinds of netwo rk modes are selectable for the device. WIFI setting Click the button [Setting] and put WLAN on, then enter the interface of WLAN search and wait for searched and listed available WLAN hot-spots;
Select a WLAN to be connected. Passwords are required for encrypted networks. How to Download/use Apps In networking mode, open App Store, browse, download and install targeted Apps. Common Troubleshooting Fail to Start the Device (e.g. Low Battery) Mount the device onto the dock correctly and charge it for 3 minutes;
Check whether the charging status is shown on the screen. Device Crash Press the power button for 11 seconds to restart. Additional Tips After startup, view [User Guide] for more details Authorized operating system update The operating system support ocial system updates. If user bru shes the third-party ROM system or hack to modify the system may cause the system unstable and also may bring security risks and threats. Precautions Safety Warning Please insert the AC plug into the AC outlet according to the identifying input on the power adapter;
It is prohibited to use the device in any places with potential explosive gases;
Nonprofessionals shall not open the power adapter anyhow so as to avoid dangers;
The device is a Grade A product. In living environment, the product may cause radio interference. Therefore;users may be required to take practical measures against the interference. Battery replacement:
1. Wrong type battery replacement may bring explosive risks!
2. Replaced battery shall be handed over to maintenance personnel for disposal. Do not put it into re!
Important Safety Instructions Avoid installing or using during thunder and lightning, otherwise lightning stroke may occur;
Cut o the power immediately if there is abnormal smell, overh eating or smog;
Do not touch the sharp paper cutting tool!
Recommendation Do not use the device near water or in humid environment. Keep liquid from falling onto the terminal;
Do not use the device in extremely cold and hot environment, e .g. around re or lighted cigarettes;
Do not smash, throw or bend the device;
Use the device in clean and dustfree environment as much as possible and keep small items from falling into the terminal;
Do not use it near medical devices unless permitted.