FCC ID: 2AH25TF701 WIRELESS DATA TERMINAL

1 2 3 4 Quick Start Guide Precautions Front Camera Used for video conferencing or shooting images and videos. 5 LED Indicator Used to indicate charging status and other alerts. Volume Key Used to adjust the volume (this key can be set as a quick code-scanning key, application supportis required). 6 Power Key Press: light up the screen, lock the screen. Long press: Press and hold for 2-3 seconds to turn on the phone when it is off. When powered on, press and hold for 2-3 seconds to select shutdown or restart. When powered off, press and hold for 11 seconds to restart automatically. Earphone hole Used for 3.5mm CTIA earphones. PSAM Card Slot Used to insert an encrypted PSAM CPU card. 1 2 3 4 5 6 7 8 9 Type-C Can be used to charge devices and for developer debugging. Rear Camera Supports photo taking and 1D/2D quick code-scanning. 10 Flash Used to olluminate the surroundings when taking a picture. 11 NFC Used for NFC cards such as membership cards. 12 Pogo pin Used for communication and charging when used with scanner handle accessory or cradle accessory. 13 Vesa Hole Suitable for the installation of Vesa bracket with hole position of 75*75 mm. 14 Barcode Scanner (Optional) For data collection through scanning. Caution: Bright light. Do not stare into beam. Safety Warnings Place the AC plug into the AC outlet that corresponds to the marked input on the accessory power adapter. This is a Class A product. In the living environment, this product may cause radio interfer ence. In such cases, the user may be required to take practical measures against the nterference. Important Safety Instructions Avoid installation or use during periods of lightning. Otherwise, there is risk of being struck by lightning. Turn off the power immediately if you notice unusual odors, overheating, or fumes. Recommendations Do not use in extremely hot or cold environments, such as near fires or lit cigarettes. Do not drop, throw or bend the product. Use in a clean and dust-free environment to avoid small items falling into the terminal. Do not use near medical equipment without permission. Statements The Company is not responsible for the following situations:

Damage caused by use and maintenance not performed under the conditions described product supplied by the Company); (without the Company's consent, the user has no right to make product modifica tions or changes) The operating system of this product supports the official system update. If the user has installed a third party ROM system or used a cracking method to modify the system files, it may lead to system instability, as well as present security risks and threats. Disclaimer Due to product updates, some details in this document may not conform to the product, please refer to the actual product. The interpretation of this Guide is subject to the Compa-

ny. We reserve the right to modify this Guide without prior notice. Technical specifications For more technical specifications, please visit: www.sunmi.com. EU regulatory conformance Conformity CE PRODUCT SAFETY WARNINGS To prevent possible injury, please read all instructions and safety information before you use the product. Operating temperature: -10C~40C Storage temperature: -40C70C Battery safety Charge battery only at ambient temperatures ranging from -20C to 60C.

(1) CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type of battery recommended by the manufacturer. Dispose of used batteries according to the battery manufacturers instructions.

(2) CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Hereby,Shanghai Sunmi Technology Co., Ltd.declares that the Wireless Data Terminal (Model NO .:TF701is in compliance with the essential requirements and other relevant provisions of RED 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet addresswww.sunmi.com INFORMATION ABOUT THE SOFTWARE The description of accessories and components, including software, which allow the radio equipment to operate as intended, can be obtained in the full text of the EU declaration of conformity at the following internet address: www.sunmi.com RESTRICTIONS OF USE The 5150-5350MHz band is restricted to indoor use in the UK and for the following countries.

* The product information listed on this page may be updated from time to time due to product upgrades or other reasons.SUNMI reserves the right to modify the product information and co-

ntents on this page without notice. FCC Statement This device was tested for typical body-worn operations with the back of the handset kept 0mm away. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided. If you are using pacemaker, hearing aid, cochlear implant or other device, please use the phone according to the doctors advice. AT BE BG CY CZ DE DK EE ES FI FR GR HU IE IT LT LU LV MT NL PL PT RO SE SI SK UK

(NI) EU Representative :SUNMI France SAS 186,avenue Thiers,69006 Lyon,France This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This symbol means that it is forbidden to dispose the product of with normal household waste. At the end of the product life cycle, waste equipment should be taken to designated collection points, returned to the distributor when purchasing a new product, or contact your local authority representative for detailed information on WEEE recycling. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Information (SAR) :

This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the device as reported to the FCC when tested for use at he body is 0.79W/kg (Body-worn measurements differ among devices, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID:

2AH25TF701 For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 0 mm from the body . Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory , position the handset a minimum of 0 mm from your body when the device is switched on at its highest certified power level in all tested frequency bands. Nano-SIM Card Slot / Micro-SD Card Slot Supports one Nano-SIM card plus one Micro-SD card, or 2 Nano-SIM cards at the same time. in this Guide. Damage or problems caused by options or consumables (not the original or approved CE certification information (SAR) 9 10 11 8 14 12 13 M2 X A M 10.1"Enterprise Tablet QUICK START GUIDE T F 7 0 1

WIRELESS DATA TERMINAL Model: TF701 SUNMI M2 max ok:ao a Input: 5V ==3A Kero l-maR@l allele]

FCC ID: 2AH25TF701 SN: 1234567890123 Nato]are) are] evielala ali k-rolalere tore Va @xerm nie

2 VA 4 WIRELESS DATA TERMINAL Model: TF701 Input: 5V == 3A Made in China FCC ID: 2AH25TF701 SKB WOE Shanghai Sunmi Technology Co., Ltd.

Company: Shanghai Sunmi Technology Co.,Ltd. Add: Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Tel: +8618501703215 Fax: +862161480325 E-mail: fang.lu@sunmi.com Date: 2021-12-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: FCC Class II Permission change for FCC ID: 2AH25TF701 Original Grant Date:2021-06-17 Dear Sir/Madam, This is to request a Class II permission change to our product name:WIRELESS DATA TERMINAL, Model TF701 (FCC ID: 2AH25TF701),the device is identical to the previously certified except for the changes as below for details Additional code scanner ModelN4603 and NG002 This authorization is valid until further written notice from the applicant. Please contact me if you have any questions or need future information regarding this application. Sincerely Yours, Signature:

Printed Name: Fang Lu Title: Certification Engineer

Company: Shanghai Sunmi Technology Co.,Ltd. Add: Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Tel: +8618501703215 Fax: +862161480325 E-mail: fang.lu@sunmi.com FCC Confidential Authorization 2021-12-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AH25TF701 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, (Shanghai Sunmi Technology Co.,Ltd.) Wireless Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description Parts List/Tune up procedure (for licensed devices) U-NII Device Security Declaration The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Clients signature Clients name/ title: Fang Lu/Certification Engineer QA-FR-171-A

Company: Shanghai Sunmi Technology Co.,Ltd. Add: Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Tel: +8618501703215 Fax: +862161480325 E-mail: fang.lu@sunmi.com FCC Authorization Date: 2021-12-16 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We , Shanghai Sunmi Technology Co.,Ltd., Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Clients signature Printed Name: Fang Lu Title: Certification Engineer QA-FR-170-B

Company: Shanghai Sunmi Technology Co.,Ltd. Add: Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Tel: +8618721763396 Fax: +8618721763396 Email: zhangwentang@sunmi.com Attestation Letter Date: 2020-07-06 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, The chip SC66-E installed in our product WIRELESS DATA TERMINAL (model name:

TF701FCC ID: 2AH25TF701), which supports WCDMA, LTE, Bluetooth, BLE, 2.4G WiFi, 5G WiFi (Band1: 5150-5250MHz, Band2: 5250-5350MHz, Band3: 5470-5725MHz, Band4: 5725-5850MHz). But for this product, it only activates Bluetooth, BLE, 2.4G WiFi, 5G WiFi(Band1/Band4), WCDMA Band2 & Band4&Band5, LTE Band2/4/7/12/13/14/17/25/26/41/66/71 functions, the other bands are disabled by using the software. Please contact me if there is need for any additional clarification or information. Best Regards, Sincerely Yours, Signature:

Title: Manager Typed or Printed Name: Zhang Wentang