FCC ID: 2BE7M-AWP307 Magnetic wireless charging

Stand Product Manual Stand UPC: 856600013244,056500013237 Model NumbersAW-P307 FCC ID: 2BE7M-AWP307 IC: 32103-AWP307 Version 1.0 Package Contents Stand 0.8 meter USB-C cable Requires 15W USB-C Power Adapter (not Included) Specifications Weight 35 g Size 63.9 mm Input 15W Output .5/1A charging speed for Qi wireless charging devices Charges iPhone 14 and later Magnetic alignment feature only worlw with iPhone 14 and later Devices AirPods Pro, AirPods Gen3 Product Overview 1 Magnetic Qi Charger 2 Pull bracket Charging Tips Stand features a magnetic Qi charger. To begin charging, simply center your device on the puck and allow it to snap into optimal charging position. Stand works with MagSafe enabled iPhones(iPhone 12 and later). Disposal of Product and Packaging Packaging: The inner cardboard tray is recyclable and can be placed in your recycling bin. The outer box and attached foam inserts are not recyclable. These components are disposable in your landfill waste. Product: Should your product become damaged or defective, and is no longer covered under warranty, please responsibly dispose of the product and its AC power adapter at your local e-waste collection center. If an e-waste collection center is unavailable to you please contact us at awell@awellsz.com and we will accept your used device back for responsible disposal. Warranty NThe product warranty is 2 years, and the charging cable warranty is 1 year, within the normal and correct use Contact awell@awellsz.com Legal FCC Statement NOTE: This equ pment has been tested and found to compy with the limits for a Class B digital dev ce, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainstharmful interference in a residential installatlon. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However. there is no guarantee that interference will notoccurina particu ar installation. If this equipment does cause harmful interference to radio or television reception; which can be determined by turningthe equpment offand on, the user is encouraged totry to correct the interference by one or more of the following measures Reorientor relocate the receiving antenna

.Increase the separation between the equipment and receiver

.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technican for help. Changes or modifications not expressly approved by the party responsible for compliance coulld void the user's authority to operate the equipment This dev ce complieswith Part 15 of the FCC Rules. Operation is subject to the folowing two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation RF Exposure Warning Statements:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equpment shall be installed and operated with minimum distance 20cm between the radiator & body Statement for IC This dev ce contains licence exempt transmltter(s)/receiver (s) that compy with Innovation, Science and Economic DeVelopment Canada's licence exempt RSS(s) Operation is subject to the fo owing two conditions

(1) This dev ce may not cause interference

(2) This de ce must accept any interfererce, including interference that may cause undesired operation of the device L'emetteur/rcepteur exempt de licence conteny dans le prsent appareil est conforme aux CNR d Innovation, Sciences et D e oppement conomique Canada app icables aux appareils radio exempts de licence. L exploitation estautorise aux deux conditions suivantes:

(1) L' appareil ne doit pas produ re de brouillage

(2) L' appareil doit accepter tout brouillage radio lectrique subi, m me si le brouillage est susceptible d' en compromettre le fonctionnement Radio Frequency Exposure Statement for lC This equipment comp ies with IC exposure limits setforth for an uncontrolled environment. This equ pment shall be installed and operated with minimum distan e 10cm between the radiator & body Cet qu pement est conforme aux limites d'exposition 1C d f nies pour un env ronnement no on controle.Cet quipement doit tre install et utilise avec une distance minimale de 10cm entre le radiateuret la carrosserie.

input: SV-3A 9V-2.2A output: 15W (MAX) C RoHS FE &

_2.5cm Model: AW-P307 1.2cm| FCC ID: 2BE7M-AWP307 IC: 32103-AWP307

Acknowledgment Letter CustomerName Huatao Intelligence Customerpart number Our company model Sample delivery date Supplier:

A11 coil G43.5-0.8-24-2P-11MM August 1, 2023 Dongguan Jieruisi Technology Co., Ltd draw to examine Ratify Lu Lin Deng Xianggui Lu Rusheng The customer acknowledges that:

Qualified unqualified recognize Note Dongguan Jieruisi Technology Co., Ltd Tel:

Fax:

address152 Guanchang Road, Taigongling Village, Dalingshan Town, Dongguan City 86+13425179000 Customer part number Customer Name Huatao Intelligence Our company model version Date G43.5-0.8-24-2P-11MM A0 2023.8.1 Plan structure diagram unit:MM Product parameters Foot position Wire diameter number of turns Note 1-2 0.08*24*2P 10 Hot air twisted wire Technical requirements:

1. Fix the wire head and tail to prevent loose or broken wires 2According to customer requirements, cut the excessively long wire ends and tin them with a uniform tin plating depth of 3 1MM 3Apply appropriate white glue on the soft magnetic sheet, attach the coil, and ensure that the surface of the product is clean and tidy during the process 4. The soft magnetic disc used is with circular holes and is undamaged 5. 5. Additional processes (according to customer requirements):

Electrical parameters 1.Inductance value, Q value PIN 1 2 = 6.5uH 0.3UH q-value40 The above inductance values are based on Quanhua 1062A instrument, with 10KHZ/0.3Vrms as the standard or equivalent instrument. Q value is based on Quanhua 1062A instrument, with 100KHZ/0.3Vrms as the standard or equivalent instrument. 5. Material list:

Note No. name material quality 1 2 3 4 5 6 Hot air twisted wire 0.08X24X2P magnetic sheet G25 Soft substrate tin High temperature environmental protection White glue Double-sided adhesive High temperature adhesive tape BY882 d i a m e t e r42mm 8MM supplier Uyghur or equivalent Tiantong or equivalent Qiandao or equivalent Qiandao or equivalent Honghui or equivalent

Shenzhen Awell Technology Co., LTD Date2024-3-15 Product Model Number: Magnetic wireless charging FCC ID2BE7M-AWP307 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By:

Contact Listed on FCC Wesbite Title: Manager Email: awell@awellsz.com Telephone: +86 15820465916 On behalf of: Shenzhen Awell Technology Co., LTD

Shenzhen Awell Technology Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BE7M-AWP307 To Whom It May Concern, Date: March 15, 2024 Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Amy Rong Signature:

Name: Amy Rong Title: Manager

US Agent for Service of Process LETTER OF ATTESTATION TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: HOPEK CORPORATION INC Address: 4358 S BANNOCK ST ENGLEWOOD, CO 80110 United States FRN: 0034562900 Contact Name: Peter Davis Telephone No: 561-235-6113 E-mail: HopekPeter@gmail.com This letter is to confirm that the US Agent for Service of Process accepts responsibility to act as a local representative on behalf of Shenzhen Awell Technology Co., LTD. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Applicant:

Company Name: Shenzhen Awell Technology Co., LTD Product Description: Magnetic wireless charging FRN: 0035022334 Grantee Code: 2BE7M FCC ID: 2BE7M-AWP307 Contact Name: Amy Rong Address: 4/F, Building C, Student Industrial Park, Hongqiaotou Community, Songgang Street, Bao 'an District, Shenzhen Telephone No: +86 15820465916 E-mail: awell@awellsz.com The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. This Agreement is valid until (Permanently valid). Date: 2024/3/22 Applicants Name: Amy Rong US Agent for Service of Processs Name:

Title: Manager Signature Title: Manager Signature 1/1

Shenzhen Awell Technology Co., LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-03-15 FCC ID: 2BE7M-AWP307 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Shenzhen Awell Technology Co., LTD certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Shenzhen Awell Technology Co., LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Applicant: Shenzhen Awell Technology Co., LTD Address: 4/F, Building C, Student Industrial Park, Hongqiaotou Community, Songgang Street, Bao 'an District, Shenzhen Contact Person: Amy Rong Tel.: +86 15820465916 Email: awell@awellsz.com Sincerely, Signature: