1.Overview 1.1 Main Functions GPS + LBS + WIFI positioning Intelligent power saving IPX5 waterproof grade Tamper alert Strong magnet installation Fast charging 10000mAh battery Listen-in 1.2 Specications Frequency Location accuracy Monitoring range Working voltage/ current Battery Working hour LED Operating temperature Dimension Weight 2.Appearance 2.1 Appearance Notch GSM 850/900/1800/1900MHz
<10 meters 5 meters 3.7V/ 60mA 10000mAh/3.7V industrial grade lithium polymer battery 30 days (drive for 2 hours a day) Red: work status
-20 +70 108(L) x 61(W) x 30(H) mm 285g MIC GSM status indicator 5.7 Vibration alarm The vibration alarm only works in mode 1 (tracking mode). To activate this function, please send 111 first to the SOS number and the device will be in arming status. To turn on the vibration alarm, please send command SENALM, ON#
SMS command for device disarming: 000 5.8 Geo-fence alarm The geo-fence alarm only works in mode 1 (tracking mode). When the vehicle enter/exit the preset geo-fence area, the device will send alarm to the SOS numbers when the geo-fence function is ON. 5.9 Voice monitoring Use preset SOS number to send command MONITOR# to the device. Device would automatically call you back in a second. Pick up and monitor the voice inside the vehicle. 5.10 Power on alarm Alarm will be sent when the device starts. SMS command:
BOOTALM,A,M#
A=ON/OFFdefaultON M=03alarming way0 : GPRS1 : SMS+GPRSM=2 GPRS+SMS+ calling; M=3 GPRS+calling; default0 BOOTALM,OFF#
Turn off the power on alarm. 5.11 Power off alarm Alarm will be sent when the device power off. SMS command:
PWROFFALM,X,M#
X=ON/OFFdefaultON M=01alarming way0 : GPRS1 : SMS+GPRS default 0 5.12 Power off restriction When power off restriction command is sent by SOS numbers, SIM card Battery switch Cover remove detection switch Anti-tamper button Push and loosen the button will trigger tamper alert Battery indicator 2.2 Standard Accessories Device Bracket User guide Charger Charge cable 1 1 1 1 1 2.3 GSM Indicator Status Flicker quickly ( every 0.3 seconds) Flicker slowly ( 0.1s on;
2s off) Always ON Meaning GSM initialization/ No GSM signal/
No SIM card Login platform Calling GSM indicator is off after the device power on for 3 minutes. If device power on, shortly press the power button to activate LED, which will be off in 60 seconds. 3. SIM card SIM card should have access to GPRS and SMS. Remove the cover, switch to OFF and insert the SIM card. Battery switch is on OFF position SIM card:Insert SIM card Notch Power USB 4. Installation With strong magnet, the device has easy installation and can absorb on any magnetic item. Attached 3M foam tape and bracket help x the device on non-magnetic items. 3M sticker Stand the device cant power off by pressing the power button. PWRLIMIT,X#
X=ON/OFFONmeans allow to power offOFFmeans power off forbidden;
Problems Poor signal PWRLIMIT#
Check ON/OFF status. 6. Platform & APP 6.1 Login service platform Please login the designated service platform to set and operate the device. 6.2 Download APP Please download and install the APP in designated website, APP store or Google Play store. 7. Warning Battery specied by manufacturer is recommended. Maintenance or service arising from any other accessories is not guaranteed. Manufacturer assumes no responsibility for any damage caused by non-original accessories. Do not bend or open the battery. Do not immerse or burn the battery. Device dis-assembly is strongly forbidden. Nonprofessionals operation may cause device damage. Troubleshooting If you are having trouble with your device, try these troubleshooting procedures before contacting a service professional. Unable to boot Unable to connect to the network Causes The signal waves are unable to transmit when use the GPS tracker in the places that have poor signal reception, such as: tall building around or basement. Power switch is off No battery No SIM card SIM card inserted incorrectly Dirty things exist above the SIM card Invalid SIM card Not in GSM service area Poor signal Solutions Using the GPS tracker in the places that have good signal condition. Switch to ON charge Insert SIM card Check SIM card Clean SIM card Contact network supplier Move to service area Move to area with strong signal Contact network supplier to get GPRS service Contact supplier Fail to locate SIM has no access to GPRS Always reply Address inquiry failed Warranty instructions and service 1.The warranty is valid only when the warranty card is properly completed, and upon presentation of the proof of purchase consisting of original invoice indicating the date of purchase, model and serial No.of the product. We reserve the right to refuse warranty if this information has been removed or changed after the original purchase of the product from the dealer
. 5. Operation 5.1 Power ON/OFF Power on: Press power button for 3 seconds ( battery switch is in ON position) Power off: Press power button for 3 seconds 5.2 SOS Number Set SOS number via APP, GPS tracking platform or SMS (SMS only valid in tracking mode) 1.SMS command to add SOS number:
SOS,A, number 1, number 2, number 3#
E.g. SOS,A,1351234xxxx, 1371234xxxx,1301234xxxx#
2.SMS command to delete SOS number:
SOS,D,number sequence 1, number sequence 2, number sequence 3#
E.g. SOS,D,1,2,3#
3.Query current SOS number:SOS#
5.3 Working Mode
(1)Tracking mode (default): GSM is always ON and location data uploaded in set time interval. Time interval can be set on APP or designated platform. SMS command format:
MODE,1,T1,T2#
1 means tracking mode T1: upload interval of GPS data in moving status, unit: second, 10-3600s; default: 10s T2:upload interval of GPS data in static status unit: second, 180-86400s; default: 3600s
(2) Ultra-long standby mode: device wakes up and uploads location data in a xed time. Notice: In this mode, all command will NOT be executed until the device wakes up at preset time interval. If you want to 2. Our obligations are limited to repair of the defect or replacement the defective part or at its discretion replacement of the product itself. 3. Warranty repairs must be carried out by our Centre. Warranty cover will be void, even if a repair has been attempted by any unauthorized service centre. 4. Repair or replacement under the terms of this warranty does not provide right to extension or renewal of the warranty period. 5. The warranty is not applicable to cases other than defects in material, design and workmanship. Authorized Service Maintenance Record Date Serviced by compel the device to wake up and receive command, you can a. By trigger the tamper alert button at the back; b. By unplug the battery and plug it in again. SMS command format:
MODE,2,T1,T2#
2 means ultra-standby mode. T1 means the start time of sleeping period. Format:
HH:MM. T2 means the sleep time interval, range 1-72(hours). Default: 24 hours. Note: SMS command takes effect after device wakes up. E.g.MODE,2,12:00,8# (Meaning: Device starts to fall asleep at 12:00, and wakes up every 8 hours) 5.4 Tamper Alert The anti-tamper button will pop out and alert will be sent if the device is disassembled. In standby mode, alert message will be uploaded and tracking mode will be activated for 20 minutes if device dis-assembly is detected. After 20 minutes, device enters into ultra-long standby mode. Dis-assembly alert can be turned off by command: cancel#
5.5 Cover Remove Alert Cover detection button pops out and alert will be sent when device cover is dismantled. In standby mode, alert message will be uploaded and tracking mode will be activated for 20 minutes if cover dismantlement is detected. After 20 minutes, device enters into ultra-long standby mode. Dis-assembly alert can be turned off by command: cancel#
5.6 Low Battery Alert When battery is low, the device will activate low battery alarm. FCC ID:X7IAT4 Product can't talk, can't transmit data over usb. Asset GPS Tracker User Guide
(Version 1.3) Product Model IMEI Number Fault Descriptions Comments To ensure quickly and correctly use, please read this manual carefully before using. Any changes to the product appearance, color or accessories are without notice. FCC caution Thisdevicewastestedfortypicalbodywornoperationswiththebackofthe handsetkept10mmfromthebody. TomaintaincompliancewithFCCRFexposurerequirements,useaccessoriesthat maintaina10mmseparationdistancebetweentheuser'sbodyandthebackofthe handset.Theuseofbeltclips,holstersandsimilaraccessoriesshouldnotcontain metalliccomponentsinitsassembly.Theuseofaccessoriesthatdonotsatisfythese requirementsmaynotcomplywithFCCRFexposurerequirements,andshouldbe avoided. FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RFExposureInformation(SAR) The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. Device types AVR1WT Android device (FCCID:X7IAT4) hasalso been tested against this SAR limit.The highest SAR value reported under this standard during product. certification for use when properly worn on the body is 0.313W/kg. 1