FCC ID: 2BEIC-CS-A103 Flying saucer shape Bluetooth Speaker with alarm clock function

450*80 90*80mm) 128g, UFO SMART ALARM CLOCK INSTRUCTION MANUAL m m 5 0 0

. 6 m m 0 8 Dear Customer :

Thank you very much for purchase and using our company's products. Before you use this product for the first time, please read the user manual carefully. It will help you use the product quickly and correctly. We hope that our product can bring you a more convenient service experience. Our goal is to continuously improve and improve our company's products. Therefore, the product you use may differ slightly from the manual. If there are minor changes, we may not be able to notify you in a timely . We apologize for any inconvenience caused! If you have any questions, please contact our after-sales service department in a timely , and we will definitely give you a satisfactory answer. Before initial use, charge the product first; If the battery level decreases, the display brightness will decrease!

Display Up+

Down-

LED Button

(Sleepiness) Mic Speaker/Buzzer Voice Controll SET Button 7- Color Light USB Charge Port Charge LED Power switch Please read through manual before using the product and keep the manual for future use Front View Back View Product parameter Product Name:Flying saucer shape Bluetooth Speaker with with alarm clock function Model NameCS-A103 Product Size: 110*110*105(mm) Product Weight: 220g Button Battery: CR2032-230mAh Recharge battery: 18650 Li-3.7Vdc Battery Capacity: 2400mAh Input Voltage: DC-5V-2A Material: ABS+PC+Silicone Executive standard: GB4706.1-2005 How to Use 1. Power on Display and Function 1.1 Power on with switch, Sount BiBi twice and enter time display interface, when in 12H mode, LED P is on and mean afternoon time, when in 24H mode, LED P is off. 1 2 3 4 1.2 Power on first time, It's Voice control and power save mode default .LED display will be off while no button pushed in 15S at Time Dispaly initerface, and LED dispaly will be on while there is Voice controll Vibration. 1.3 Short press the voice control button to turn on or off voice control fucntion at Time Display interface and Night Light is off.as following pic. showing, LED will be on while voice control is off Voice control on Voice control off 1.4 Press LED button to change brightness of LED with 3 levels at Time Dispaly interface1.5 Long press LED button 2S to turn on/off Night Light.Short press middle LED button to switch color as following:

white red yellow green cyan blue purple atmosphere light, with a seven color cycle. 1.6 Short press +/- button at Time Display interface while Night Light is on to adjust the brightness of Night Light L30-L01 level up or down Long press 2S to quickly adjust 2. Time Display Operatation and Function 2.1 Normal time dispaly , showing as following pic. m m 0 8 2.3 It's will return Time Display while there is no opearteion in 15S at Non Time Display Mode. 2.4 Time set: Long press Set button 2S enter SET mode , Short press Set button to switch as following : 24/12H Hour Minute Year Month Day Exit;

Short press +/- button to adjust related SET, Long press to quickly adjust. 2.5 The Second reset to zero automatic while SET Minute; It's will exit SET while no operation in 15S; Long press SET button 2s to exit SET function. 3. Leran alarm operation and Funciton 3.1 Long press SET enter Learn alarm SET at Learn alarm interface, Short press SET button to swich as following: Learn alarm clock hour Learn alarm clock minute Learn alarm clock sound selection Alarm clock on/off on weekends Exit;

Short press +/- button to adjust related SET, Long press 2S to quickly adjust;

Exit while No operation for 15S or Long press SET 2S. 3.2 Short press + button to turn on /off Learn Alarm at Learn Alarm interface;

Turn on Learn Alarm automatically while enter Learn Alarm SET mode, and Set Learn Alarm Weekend on/off state , showing as following pic. :

3.4 Cancel Alarm : The sound will be stop while any button pressed and button fucntion is not used except Sleepiness button. 3.5 Sleepiness mode: Short press LED button enter Sleepiness mode, Red night light is off , Sleepiness icon flash at a frequency of 1Hz; Sleepiness time is 5 minutes;

Short press any button to exit Sleepiness mode and button functioni is not used 4. Wake up alarm operation and function 4.1 Long press SET button 2S to enter Wake up Alarm SET at Wake up alarm interface, Short press SET button to switch as following: wake-up alarm hour wake-up alarm minute wake-up alarm sound selection alarm clock on/off on weekends exit;

Short press +/- button to adjust related SET, Long press 2S to quickly adjust; Exit while No operation for 15S or Long press SET 2S. 4.2 Short press + button to turn on /off Wake up Alarm at Wake up Alarm interface ;

Turn on Wake up Alarm automatically while enter Wake up Alarm SET mode, and Set Wake up Alarm Weekend on/off state , showing as following pic. :

12H 24H 2.2 Time display mode, short press SET button to switch as following :

Time Date Learning alarm clock Waking alarm clock Sleep alarm clock . Date Alarm on Alarm off Clock Off Clock On Turn Off The Alarm Clock On Weekends Weekend Alarm Clock On 3.3 Learn Alarm sound: The learn alarm music will turn on automatically and Red night light is on while alarm clock time is up, the learn alarm icon will flash at a frequency of 1Hz, and sound for 1 minute.The alarm will stop while no button pressed for 1 minute. Red night light is off and learn alarm icon showing while alarm stop. Clock Off Clock On Turn Off The Alarm Clock On Weekends Weekend Alarm Clock On 4.3 Wake up Alarm sound: The Wake up alarm music will turn on automatically and Yellow night light is on while Wake up clock time is up, the Wake up alarm icon will flash at a frequency of 1Hz, and sound for 1 minute.The alarm will stop while no button pressed for 1 minute.Yellow night light is off and Wake up alarm icon showing while alarm stop. 5.5 Greedy sleep function: When there is an alarm, briefly press the LED light button to enter the greedy sleep mode, and the greedy sleep icon flashes at a frequency of 1Hz;

Sleeping for 5 minutes. Warning:

When charging this product, please use a adapter with an output voltage :

5V-2A DC and use the standard USB charging cable. When abnormal situations occur during the use of the product, please immediately stop using it.This product has a built-in rechargeable battery, which is not washable, can't be heavily pressed, and can't be near high temperature hazards.This product can't be disassembled or repaired . 4.4 Cancel Alarm : The sound will be stop while any button pressed and button fucntion is not used except Sleepiness button. 4.5 Sleepiness mode: Short press LED button enter Sleepiness mode, Yellow night light is off , Sleepiness icon flash at a frequency of 1Hz; Sleepiness time is 5 minutes;

Short press any button to exit Sleepiness mode and button functioni is not used. 5.Sleep Alarm operation and function 5 Sleep alarm mode operation and function description:

5.1 In the sleep alarm display mode interface, long press the LED key for 2 seconds to enter the sleep alarm setting. Short press the LED key to switch settings, in order:

sleep alarm hour sleep alarm minute sleep alarm sound selection alarm weekend on/off exit; Short press the+/- keys to adjust the settings up/down, and long press for 2 seconds to quickly adjust up/down; 15 seconds without button operation to exit the setting; Press and hold the setting button for 2 seconds to exit the setting. 5.2 Sleep alarm display interface, short press the [UP] key to switch on and off the sleep alarm; Entering the sleep alarm setting automatically turns on the sleep alarm. In the sleep alarm setting state, you can set the weekend on/off state of the sleep alarm, as shown in the following figure:

Clock Off Clock On Turn Off The Alarm Clock On Weekends Weekend Alarm Clock On 5.3 Sleep alarm clock sounds: When the alarm time arrives, sleep music will automatically start, and the sleep alarm icon will flash at a frequency of 1Hz; Noise duration: 1 minute. 5.4 Cancel the alarm: 1 minute without button operation, stop the alarm, and the sleep alarm icon will always be displayed; There is a button operation that stops ringing and does not execute the button function. 5 6 7 8 90 mm 90 mm 90 mm 90 mm 90 mm FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Label and label location High:2cm Small flying saucer Bluetooth audio alarm clock FCC ID: 2BEIC-CS-A103 Wide:3cm

Shenzhen Constantsino Electronic Technology Co., LTD Section 2.911(d)(5)(i) Certification Equipment Type Company name: Shenzhen Constantsino Electronic Technology Co., LTD Address:1201, 12th Floor, Dahong Science and Technology Innovation Park, 48 Xinyu Road, Xinqiao Street, Baoan District, Shenzhen China Product Name:Flying saucer shape Bluetooth Speaker with alarm clock function FCC ID: 2BEIC-CS-A103 Model(s):CS-A103, CS-A101, CS-A102 2.911(d)(5)(i) Equipment Type We, [Shenzhen Constantsino Electronic Technology Co., LTD] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name:Rong huaMao Date:2024.1.11 Title and Company name:N/A/Shenzhen Constantsino Electronic Technology Co., LTD NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Shenzhen Constantsino Electronic Technology Co., LTD Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Shenzhen Constantsino Electronic Technology Co., LTD Address:1201, 12th Floor, Dahong Science and Technology Innovation Park, 48 Xinyu Road, Xinqiao Street, Baoan District, Shenzhen China Product Name:Flying saucer shape Bluetooth Speaker with alarm clock function FCC ID: 2BEIC-CS-A103 Model(s):CS-A103, CS-A101, CS-A102 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Constantsino Electronic Technology Co., LTD] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:Rong huaMao Date:2024.1.11 Title and Company name:N/A/Shenzhen Constantsino Electronic Technology Co., LTD NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Shenzhen Constantsino Electronic Technology Co., LTD Reference No. 2023U0213 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Constantsino Electronic Technology Co., LTD Address:1201, 12th Floor, Dahong Science and Technology Innovation Park, 48 Xinyu Road, Xingiao Street, Baoan District, Shenzhen China Product Name:Flying saucer shape Bluetooth Speaker with alarm clock function FCC ID: 2BEIC-CS-A103 Model(s):CS-A103, CS-A101, CS-A102 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Constantsino Electronic Technology Co., LTD] (the applicant) designate [UA INTERNATIONAL INC.] TE" for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: UA INTERNATIONAL INC. Company name:Shenzhen Constantsino Address: 5030 Boardwalk Dr, Suite 818, Electronic Technology Co., LTD Colorado Springs, CO 80919, United States Address:1201, 12th Floor, Dahong FCC Registration Number (FRN): Science and Technology Innovation Park, 0033510736 48 Xinyu Road, Xinqiao Street, Baoan Contact Name: Jessica Zhong District, Shenzhen China Telephone No: 001-719-6787182 Grantee FRN Number: 0034734111 Email: UA.customerservice@hotmail.com FCC Grantee Code: 2BEIC Contact Name:Rong huaMao Telephone No: 0755-85278020 Email:mrh168@126.com 2.911 (d)(7)USA Agent v1.5 Shenzhen Constantsino Electronic Technology Co., LTD Reference No. 2023U0213 Signature:

Title:

Rong buaMae Signature:

Title: N/A Date:2024 Date:2024.1.11 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https :/Awww.federalregister. gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.5

Shenzhen Constantsino Electronic Technology Co., LTD Agent Authorization Company:Shenzhen Constantsino Electronic Technology Co., LTD Address:1201, 12th Floor, Dahong Science and Technology Innovation Park, 48 Xinyu Road, Xinqiao Street, Baoan District, Shenzhen China Product Name:Flying saucer shape Bluetooth Speaker with alarm clock function Model Number(s):CS-A103, CS-A101, CS-A102 Product Description:Flying saucer shape Bluetooth Speaker with alarm clock function We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2024.1.11 Name:

Rong huaMao Title:

N/A Company: Shenzhen Constantsino Electronic Technology Co., LTD

Shenzhen Constantsino Electronic Technology Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BEIC-CS-A103 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Date: 2024.1.11 These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Rong huaMao Title:N/A

Shenzhen Constantsino Electronic Technology Co., LTD Model Difference Product description: Flying saucer shape Bluetooth Speaker with alarm clock function Model name: S-A103 CS-A101, CS-A102 Trade Name: N/A All the model are the same circuit and RF module, only the model name is different. Regards Sincerely Clients signature:

Clients name / title : Rong huaMao/N/A Contact information / address: 1201, 12th Floor, Dahong Science and Technology Innovation Park, 48 Xinyu Road, Xinqiao Street, Baoan District, Shenzhen