Working Environment The radio signal can penetrate lignin, glass and other the non-metallic objects, realizing 360 degree free transmit, however, it can not penetrate the metal materials.So please do notput the mouse, keyboard and the receiver onto the metallic tabletop. The ideal distance is above 20 CM. Please be sure there is no big metal between the mouse and receiver, otherwise the connection will be affected: for desktop, USB extending port or front-set USB port is better. The receiver should be far away from the monitor, outside disc driver or other electronic products. 20 CM distance is suggested in order to prevent the radio disturbance produced by other electronic products. The mouse is suitable for operating media wooden, paper or cloth, but not for tre lens cover, such as glass and smooth rubber. Amouse pad is needed in such environment. jee Selassie valet eanatlinn dee ten mae elie Debugging tips Check the receiver again, and make sure itis connected to the USB port. Check the battery direction should be correct. 1 Put the"on-off*button to"on". Check the battery capacity. Reduce the distance of the receiver and the mouse. Re-establish the mouse and the receiver communication channel. FCCINFORMATION
"Note: Ths equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, thee is no
(uatantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures Reorient o relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet ona circuit ferent from that to which the receiver is awvconnected, Consult the dealer or an experienced radio/TV technician for help Caution: Any changes or modifications not expressly approved by the party responsible for compliance could vid the user's authority to operate the equipment. baal end cctinal mahi meindreeyttid ota, demrtoprantbreintt asad is under certain radio disturbance environment, the normal environment are better, the actual receiving distance is higher than standardized, but if mix-machine, motor, electric drill and other strong electronic equipments operating nearby, which may lead to slowly receiving or other abnormity. Thank you for choosing this vertical mouse, please read the user manual carefully when you use this product. Content Mouse User Manual Battery Botton Function ee 0 o oP! button
@ Left button Scroll whee!
Right button 60
@ Backward function Forward function
@ Removable palm rest Features 1m 2.4G wireless technology, 16 channel intelligent frequency. Intelligent low-voltage indicator function Advanced laser engine, accurate location, fast and flexible.
' With ON/OFF switch, OFF mode would save power. 1 Intelligent power-saving mode, prolong the battery time Tips:
' Please take out the batteries if you do not use the wireless mouse for long time, and keep them ina cool and dry place. Please do not use the battery if leaking, discoloration, distortion or other abnormity happens. Battery installation 1, Open the battery cover 2. Put battery in correct direction 3. Cover the battery cover In order to achieve the best economical effect, the intelligent power saving technology is adopted. When your mouse stops moving. t will switch to the power-saving mode automatically. If your mouse stops working for about 8 minutes, it will enter the deep power-saving mode, which costs little battery. 2.4G Wireless Mouse Tips:
Keep the ON/OFF switch on OFF mode if you donot use the mouse for a long time Itwill save more power to use the mouse on light color media than the dark one. Connection of the receiver Connecting the receiver to the PC by the USB port, for desktop, USB extending port or front-set USB port is better. When receiver plugs into USB port, computer would detect the device automatically. Mouse could works normally with ON mode. the mouse couldn't work normally, should build up connections between the mouse and receiver. Building up connection between the mouse and receiver In case the connection is lost, please establish a connection again between mouse and receiver by completing the following 1. Turn on the mouse. Press left, right and middle
(scroll wheel) buttons at the same time, red LED under scroll wheel will fash. 2. Plug the receiver into USB port of the computer. 3, The red ELD will turn off when the connection is established This device complies with part 15 of the FCC Rules. Operation is subject to the following two:
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. MP: MG1SAG HE AA brill FHP He Ret: 60*90MM PAM: LO0GT AK EN fil: ED fa
+3: R3. 4, 0MG1806500B 3 BE BA 43