Battery installation to the keyboard 1. Press the button on the keyboard, the battery buckle will eject out Qo [1 o 2. Putinto 2" AAA (7#) batteries in correct direction z + = =
8 a 3. Cover the buckle Building up connection between the mouse and Dongle Pull out the Dongle from the USB port, press the left-right 3 mouse buttons at first, the indicator on the top of the mouse will flash at this time. Connect the Dongle to the USB port, the light will turn off, and the mouse can be used. If not, please try again. Working Environment The Dongle should be far away from the Monitor, outside disc driver or other electronic products, in order to prevent the radio disturbance produced by other electronic products the suggested distance is above 20 centimeters The radio signal can penetrate lignin, glass and so on the non-metallic objects, achieves 360 degree free transmit, but it can not penetrate the metal materials, 80 please do not put the mouse and the Dongle onto the metallic tabletop, suggested distance is above 20 centimeters;Please be sure there is no big size metal between the mouse and Dongle, otherwise the connection will be affected. Optical mouse is suitable for operating media wooden, paper or cloth, but not for the ratent, such as glass and smooth rubber. Amouse pad is needed in such environment. The standardized receiving distance we offered is under certain radio disturbance environment, the normal environment are better, the actual receiving distance is higher than standardized, but if mix-machine, motor, electric drill and other strong electronic equipments operating nearby, which may lead to slowly receiving or other abnormity. A lower battery indicator is adopted in the keyboard. It will flash when the batteries are running out. At this time please change the batteries, you are recommended to use the battery with the same type, new battery and old battery cannot be mixed to use. Connection of the Dongle Connecting the Dongle to the PC by the USB port Building up connection between the mouse or the keyboard and Dongle Please build up the connection under the conditions as follows If there is radio disturbance from other wireless keyboard or mouse Somebody try to build up the connection, but failed a Building up connection between the keyboard and Dongle Pull out the Dongle from the USB port at first, and press the CONNECT button at the bottom of the keyboard, the indicator on the keyboard will flash at this time. Connect the Dongle to the USB port within 15 seconds, when the USB Dongle is detected, the indicator will turn off, and can be used. If not, please try again.
= a %
Trouble Shooting Check the Dongle again, be sure it is connected to the USB port. Check the battery direction should be correct. Change two pairs of new AAA batteries Check the connection of the mouse and Dongle Reduce the distance of the Dongle and the mouse (or keyboard) Putthe on-off buttonto On