product descriptio n:
appendix :
Manufactu Shenzhen Yu sheng Communication Equipment Co., Project model : IDB 0 3 rer:
LTD Specification / Color: white Bluetooth antenna Sample signing date : 2023-12-01 R:a Note: (This cover requires supplier seal) QC engineering drawing sample Reliability test report Packaging mode Material Name :
Material Code :
version number:
Electrical and mechanical performance description
(specifications) manufacturing flow chart CPK Report the full-size measurement report List of raw mater ials / RoHS Report / HF / REACH ratify:
(Everything needs to be provided) Supplier signature and approval : Review :
(All of the above require manual signature, and printing is not allowed) The above should be filled inby the supplier andthe following by Aidu department confirm content Supplier quality RoHS material Non-RoHS materials Compliance with the REACH requirements Meet the halogen-free requirements Other environmental protection requirements confirm the results valfirm person /
date Customer request ID color confirmation Design department ID:
constructio n engineer Technic al conf irma tion colu mn hardware engineer 2D drawing file dimensional confirmation Specification and technical requirements 2D drawing file dimensional confirmation Specification and technical requirements Research and development quality:
Test criteria confirm the appearance Surface process validation Shell, hardware, key material adaptation validation function Shell, hardware, key material effect adaptation validation function Shell, hardware, key material effect Function effect reliability verification adaptation validation 1 / 16 Focus on controlling the dimension labeling electrical performance parameters Focus on controlling the dimension labeling electrical performance parameters Normative dimension labeling (key ruler cun) Electrical performance parameters function effect Final Confirmation of the Project Manager:
Acknowledge the integrity of the documents Normalization of dimensions
(key dimensions) Specification and technical requirements appearance Conditions of recognition: formal recognition limited recognition disallow Distribution department: IQC supplier customer after-sales SQE / text control other QF - QMP -QA 01-01 2 / 16 Shenzhen Yusheng Communication Equipment Co., LTD catalogue 1. OVERVIEW ........................................................................................................................................................... 4 1.1 SCOPE OF APPLICATION ..................................................................................................................................................................................... 4 2. TECHNICAL INDEX REQUIREMENTS .......................................................................................................... 4 2.1 INTRODUCTION OF TEST ITEMS AND EQUIPMENT .................................................................................................................................4 2.2 ACTIVE REPORTING .............................................................................................................................................................................................. 4 2.2.1 TEST INSTRUCTIONS ........................................................................................................................................................................................ 4 2.2.2 ANTENNA PASSIVE PARAMETERS ...............................................................................................................................................................5 2.2.3 ANTENNA MATCHING ..................................................................................................................................................................................... 5 2.2.4 ANTENNA PASSIVE PARAMETERS ...............................................................................................................................................................6 2.2.5 ANTENNA DIRECTION DIAGRAM-.............................................................................................................................. 6 2.2.6 ANTENNA TEST ENVIRONMENT ..................................................................................................................................................................7 3. ENGINEERING DRAWING FILE ..................................................................................................................... 8 4. LIST OF MATERIALS ..........................................................................................................................................9 5. FULL TEST SIZE REPORT ...............................................................................................................................1 0 6. FPC-CPK ...............................................................................................................................................................11 7. RELIABILITY TEST REPORT........................................................................................................................... 13 8. PACKAGING INFORMATION ....................................................................................................................... 15 9. MANUFACTURER ............................................................................................................................................ 16 3 / 16 Shenzhen Yusheng Communication Equipment Co., LTD 1. Overview 1.1 Scope of application This requirement specifies the antenna technical requirements and material requirements specifications for IDB03 products. This requirement applies to the selection, testing and acceptance of IDB03 antennas. 2. Technical index requirements 2.1 Introduction of test items and equipment inventory S11 test item equipment paramete Standing wave ratio, echo loss network analyzer TRP,TIS Integrated tester, microwave darkroom Gain, efficiency network analyzer r Active test Passive test 2.2 Active Reporting 2.2.1 Test instructions Test tools: Agilent8960 instrument, R & SCMW500, full wave far field ETS dark room, high prec ision positioning system and its controller and computer with automatic test program Test environment: temperature 22 3, humidity 50% 15%
Test method: The DUT is fixed in the center of the turntable with the H plane, on the same h orizontal line as the center of the horn antenna. The positioning system enables the DUT to rotate in the whole sphere to satisfy the high-
precision 3 D positioning. Each RF instrument and turntable controller communicate with PC with automatic test software through GPIB interface. 4 / 16 2. 2.2 Antenna passive parameters Shenzhen Yusheng Communication Equipment Co., LTD 2.2.3 Antenna matching 5 / 16 2. 2.4 Antenna passive parameters Shenzhen Yusheng Communication Equipment Co., LTD 2. 2.5 Antenna direction diagram 6 / 16 6 / 16 2.2. 6 Antenna test environment Shenzhen Yusheng Communication Equipment Co., LTD 7 / 16 Shenzhen Yusheng Communication Equipment Co., LTD 3. Engineering drawing 8 / 16 8 / 16 Shenzhen Yusheng Communication Equipment Co., LTD 4. List of materials 9 / 16 Shenzhen Yusheng Communication Equipment Co., LTD 5. Full test size report 10 / 16 Shenzhen Yusheng Communication Equipment Co., LTD 6. FPC-CPK 11 / 16 Shenzhen Yusheng Communication Equipment Co., LTD 12 / 16 Shenzhen Yusheng Communication Equipment Co., LTD 7. Reliability test report p t Ho an col shock es re or d d t t t client Love is date 2023-12-02 Factory number
P / N IDB03 quantity Each 5PCS testing time 48H Material specification FPC antenna supplier Renesola reference MIL-SDT-2 0 2 Method01 7 IEC60 74 9 -25 JEDEC JESD22 -A1 0 4- B IEC68- 2-1 MIL-
standard STD-2168-85 Test purpose: To test the reliability of products and coating binding force, coating and oxidation resistance and corrosion resistance. Equipment name: high and low temperature test box temperature 22-26 relative humidity 65-75%
atmos 1MPA laboratory environment test parameter temperature high temperature 80 low temperature minus forty time c o n s t a n t t e m p e r a t u r e High temperature 0.30H High temperature heating Low temperature 0.30H Low temperature cooling 10min 10min cycle index 32 Times else relative humidity 95%
visual laminati inspection on ACC oxidize ACC blister ACC test antistrip ping 0.8kgf/cm2 spot welding test record:
ACC Bige test ACC ntexperi ACC identification of product Product test results After the experiment, the product was oxidized and rusted. 13 / 16 Temperature tolerance 2 1. High temperature warming rises from remarks normal temperature to set high temperature. 2 The ink fell off Wearresista ACC ment judge ACC Shenzhen Yusheng Communication Equipment Co., LTD Shenzhen Yusheng Communication Equipment Co., LTD Salt mist test report client:
Love is Model number: IDB 03 Sample condition Number of samples: 5 PCS Material: FPC antenna cladding material:
Start time of the experiment: 10:25 on November 28,2023 to 10:25 on November 20,2023,48 hours Type of experiment NSS ASS CASS Salt solution: 5%
PH:7.0 Box temperature: 35 C Relative humidity: 85%
Spray method: Continuous interval Compressed air pressure: 1kg / m 2 precipitation rate of salt spray:
Fog liquid collection: PH7.0 anc Experimental period: 1- -cycle Spray time: 48H Hold time: 2H The test temperature is: 36 Pressure barrel temperature: 47.5 experiment condition The results were observed every 16 hours Appearance after the experiment: the appearance is intact and intact, no obvious change experimental result Plating: no peeling, no corrosion Surface spraying, screen printing: no falling off, no bubbles 14 / 16 Shenzhen Yusheng Communication Equipment Co., LTD 8. Packaging information product name P / N Project model File details Packaging method diagram FPC antenna 063025 IDB03 Carton Size 1:
270*260*200MM Carton Size 2:
260*200*200MM Carton Size 3:
Depending on the order quantity / volume Boating method Packaging by order quantity Total number of binning Packaging by order quantity Tag Size 1:
Universal use 100 *
100mm Tag Size 2:
According to customer requirements labeling requiremen t matters need attention 1. Due to the limitation of order quantity, the packing method of each material is the size of the box according to the total quantity of the order or the physical volume 2. Storage temperature: room temperature 3. Preservation conditions: store them in a cool and dry place 15 / 16 Shenzhen Yusheng Communication Equipment Co., LTD 9. manufacturer manufacturer Shenzhen Yusheng Communication Equipment Co., LTD Address: 407-411, Building 2, Nantaiyun Chuanggu Park, intersection of Guangming Avenue and Dongchang Road, Guangming District, Shenzhen 16 / 16