all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.92 MiB | August 05 2021 | |||
1 |
|
Internal Photos | Internal Photos | 537.86 KiB | August 05 2021 | |||
1 |
|
External Photos | External Photos | 291.71 KiB | August 05 2021 | |||
1 |
|
Label and location | ID Label/Location Info | 505.92 KiB | August 05 2021 | |||
1 |
|
Declaration Letter of Model Difference | Cover Letter(s) | 71.69 KiB | August 05 2021 | |||
1 |
|
FCC Confidentiality request letter | Cover Letter(s) | 109.99 KiB | August 05 2021 | |||
1 |
|
Power of Attorney Letter | Cover Letter(s) | 69.09 KiB | August 05 2021 | |||
1 |
|
RF Exposure-MPE | RF Exposure Info | 145.97 KiB | August 05 2021 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 218.18 KiB | August 05 2021 | |||
1 |
|
Test report-DSS part 1 | Test Report | 4.06 MiB | August 05 2021 | |||
1 |
|
Test report-DSS part 2 | Test Report | 3.73 MiB | August 05 2021 |
1 | User Manual | Users Manual | 1.92 MiB | August 05 2021 |
42” Sound Bar with Bluetooth®
NHS-7008
Instruction Manual
Please read carefully before use and keep for future reference.
Thank You ..................................................................... 3
Manual Station Preset ................................................................ 14
Table of Contents
In the Box ...................................................................... 3
Installing Your Sound Bar ............................................ 4
On a Table Top .................................................................................4
How to Mount the Sound Bar to a Wall ......................................4
At a Glance .....................................................................7
Front View ........................................................................................7
Remote Control .............................................................................. 9
Using the Remote Control .................................................. 10
Replacing the Battery ......................................................... 10
Connecting Power ........................................................ 11
Getting Started ............................................................12
Turning the Unit On and Off .......................................................12
Setting the Time ............................................................................12
Setting the Source Mode .............................................................12
Adjusting the Volume ...................................................................13
Using FM Radio Mode ..................................................13
FM Radio Controls ........................................................................13
Optimizing FM Radio Reception .................................................13
Automatic Station Scan ...............................................................13
Using Bluetooth® Mode ...............................................14
Pairing a Bluetooth® Device ....................................................... 14
NFC One-Touch Setup ..................................................................15
Bluetooth® Controls .....................................................................15
Using AUX 1 Mode.........................................................16
Using AUX 2 Mode ........................................................16
Using OPTI Mode .......................................................... 17
Using USB & SD Modes ................................................. 17
Warnings and Precautions ..........................................18
Troubleshooting Guide ............................................... 22
Specifications ............................................................. 23
Support ....................................................................... 23
Page 2
Naxa Electronics
Thank You
We know you have many choices when it comes to
technology; thank you for choosing us here at Naxa
Electronics. Established in 2001 in Los Angeles, Califor-
nia, we are dedicated to delivering products that en-
tertain and delight.
We trust that you will be happy with your purchase.
Please read this manual carefully and save it for refer-
ence. You may also find the latest FAQ, documentation,
and other product material at our website. Come visit
us on the web at www.naxa.com and see all that we
have to offer!
In the Box
Please take a moment to make sure that you have ev-
erything in the list below. Although we make every ef-
fort to ensure that each Naxa device is securely packed
and sealed, we know a lot can happen in between us
and you. If anything is missing, check back with your
local retailer to get immediate assistance. If they can-
not help you, please contact our Naxa Support team at
www.naxa.com/naxa_support.
• NHS-7008
•
AC power adapter
• Wall mount kit
• Remote control
• RCA audio cable
•
AUX audio cable
• User manual
www.naxa.com
Page 3
Installing Your Sound Bar
On a Table Top
Find a flat and level surface to place your sound bar.
Most people position the sound bar centered below
their TV.
When placing the Sound Bar on an entertainment cen-
ter, bookshelf, or any type of enclosed space, be sure
to allow space around the Sound Bar for ventilation.
If the Sound Bar is enclosed in a tight space without
adequate ventilation, heat generated by the Sound Bar
could produce a potential heat hazard.
How to Mount the Sound Bar to a
Wall
A wall mounting kit is included in the box for your
convenience. However, each
installation environ-
ment is unique and has its own requirements; you may
need additional material to prepare the sound bar for
mounting.
You will need the following:
Included wall mounting kit (2 wall brackets, 4
screws, 4 drywall plugs)
•
•
•
Pencil
Level
• Ruler
• Drill
• Hammer (for drywall installations only)
•
Cross-head screwdriver
Page 4
Naxa Electronics
Naxa Electronics recommends that wall mounting be
performed by a qualified professional installer. Naxa
is not liable for any accidents or damage to property
or the sound bar due to incorrect installation.
2. Use the wall brackets as a template to mark a sec-
ond set of points on the wall. Make sure the bracket
is level before marking the wall, and that the points
are level with each other.
1. Using a level and ruler, use a pencil to mark 2 points
on the wall that are 33.4 inches apart. Use the level
to ensure that the points are on the same horizon-
tal plane.
3. Use the drill to drill a hole at each of the 4 marked
points on the wall. Select a drill bit that is appropriate
for your wall’s construction. If you are using the dry-
wall plugs as directed in step 4, make sure the diam-
eter of the drill bit matches the diameter of the plugs.
4. For drywall installations only; for wood, skip to
step 5: using a hammer, gently insert the drywall
plugs in each of the holes. The plugs should fit
completely into the hole, with the tops of the plug
flush with the wall.
(For installations in brick or concrete walls, please
obtain masonry plugs from your local hardware
store.)
5. Use a screwdriver and two screws to affix the left
bracket to the wall, then do the same for the right
bracket. Hand-tighten the screws; do not over-
tighten them! Note the orientation of the hooks
on the bracket in the illustration.
1. Screws
2. Wall bracket
3. Drywall plugs
(optional)
3
2
1
www.naxa.com
Page 5
6. Make sure that the brackets are stable and firmly
attached to the wall. Locate the mount points on
the rear of the sound bar, then hook the sound bar
onto the brackets.
⚠⚠ The wall that the brackets are mounted on
should be of sufficient strength to support
the weight of the sound bar, and the brack-
ets should be perpendicular to the floor.
Page 6
Naxa Electronics
At a Glance
Front View
1
1
Speakers
Full-range drivers and built-in
subwoofers.
2 Display screen Displays status information.
Detects signals from the remote control.
4 TUN– /
Tuning down, Previous/Reverse
TUN+ /
Tuning up, Next/Forward
Remote
sensor
3
5
6
7
VOL–
VOL+
8 MODE
Volume down
Volume up
Press to change the active connection
mode (FM, BT, USB, CARD, OPTI, AUX 1,
AUX 2).
Press to turn the unit on and off.
2
3
4
6
9
5
7
8
AUX 1
9 AUX 1
connector
AUX 1 mode. 3.5mm stereo connection
for devices with 3.5mm line-out or head-
phone output.
www.naxa.com
Page 7
Connector for the included power adapter.
14
CARD
AUX 2 mode. RCA stereo connection for
devices with red and white RCA left/right
audio output.
15
ANT
CARD mode. Load memory cards here.
Refer to the specifications for a list of sup-
ported memory card types.
Antenna lead. Extend and position the
antenna wire for optimal radio signal
reception.
Power
socket
AUX 2
connector
10
11
12
13
USB port
OPTI
connector
OPTI mode. Digital optical audio connec-
tion for devices with optical audio output.
USB mode. Load USB memory sticks here.
The USB port is designed for media play-
back from flash memory devices. It is not
designed to charge high-power devices.
Page 8
Naxa Electronics
Remote Control
MODE
TUN-
TUN+
NHS-7008
Power/standby. Press to turn the
unit on or off (standby).
MODE
Mode. Press to change the active
source mode.
Mute. Press to temporarily dis-
able or to restore the sound.
FM SCAN FM scan. Press to find FM radio
stations within reception range.
TUN–
Tuning down. Press to tune to a
lower radio station.
Previous. Press to skip to the
previous track (BT, USB, SD).
TUN+
Tuning up. Press to tune to a
higher radio station.
Next. Press to skip to the next
track (BT, USB, SD).
Memory up. Press to go to the
next FM radio preset station.
Equalizer. Press to change the
audio equalizer preset.
M+
EQ
CLOCK
Clock. Press and hold to adjust.
VOL–
VOL+
BASS–
Volume down. Press to decrease
the volume level.
Volume up. Press to increase the
volume level.
Bass down. Press to decrease
the bass level.
Pause or resume playback (BT,
USB, SD).
BASS+
Bass up. Press to increase the
bass level.
TREBLE–
Treble down. Press to decrease
the treble level.
TREBLE+
Treble up. Press to increase the
treble level.
www.naxa.com
Page 9
Using the Remote Control
Before using the remote for the first
time, remove and discard the plastic
insulation tab as shown.
working. Direct sunlight, incandescent or
fluorescent lamps, or any other strong
light shining on the remote sensor of the
unit may prevent the remote control from
working properly.
Aim the IR emitter of the remote control at the remote
sensor and then press a key.
The remote control will work within 16 feet of the re-
mote sensor and within 30 degrees from center.
Replacing the Battery
The remote control is powered by one (1) “CR2025”-
type battery.
1. Squeeze the tab of the battery com-
partment to the right while drawing
the battery tray out.
2. Take note of the orientation of the
existing battery. Replace it with a new
“CR2025” lithium battery, making
sure to match the polarity of the old
battery (as well as the +/- markings
on the remote control.
3. Push the tray back into place.
⚠L The battery in the remote will
last for approximately 1 year. Replace the
battery if the remote control does not
⚠L Obstacles between the unit and transmit-
ter may prevent the remote control from
Page 10
Naxa Electronics
work. Always dispose of batteries accord-
ing to your local municipal regulations.
⚠⚠ The batteries used in the remote control
may present a fire or chemical burn if
mistreated. Do not recharge, disassemble,
incinerate, or heat the battery (~212°F). Do
not mix old with new batteries, or different
types of batteries. Remove the batteries
from the remote if it will not be used for a
long period of time. Keep batteries away
from children.
Do not spill water on the remote control.
Do not use the remote control for other
equipment at the same time.
Battery Precaution
Heed the following when handling the battery used in this device.
1. Use only the size and type of battery specified.
2. Be sure to install the battery properly by matching the polarities indi-
cated in the battery compartment. Installing a battery with reversed
poles may cause damage to the device.
3. Remove the battery from the device if it is empty or will not be used
for a long time to prevent damage or injury from leakage.
4. Do not charge a battery that is not designed for charging.
Connecting Power
Use the included AC power adapter to connect the unit
to AC household power.
•
•
Connect the two-pronged end of the adapter to a
household power outlet.
Connect the barrel plug end of the adapter to the
Power socket [10] of the unit.
⚠⚠ The adapter supports AC 100-240V power
only. Do not connect the power adapter to
a power outlet other than that which is in-
dicated here and on the rating label of the
power adapter as this may result in the risk
of fire or electric shock.
Disconnect the unit from power if it will not
be used for a long time.
Do not handle the power plug with wet
hands. Doing so may cause electric shock.
Do not use the adapter with any other power
source.
www.naxa.com
Page 11
Getting Started
Turning the Unit On and Off
To turn the unit on, press the
screen [2] will light up.
button [8]. The display
To place the unit in Standby mode, press the
but-
ton on the remote until the display screen [2] shows the
time.
To turn the unit off completely, disconnect the unit
from power.
Setting the Time
The time is shown on the display screen [2] when the
unit is in Standby mode. To set the time:
1. Press and hold the CLOCK button on re-
mote control. The hour digit will blink.
2. Press the TUN- or TUN+ button [4, 5] to adjust the
hour while it is blinking. Press CLOCK to
save the hour; the minutes will blink.
3. Press the TUN- or TUN+ button [4, 5] to adjust the
minutes while it is blinking. Press CLOCK to
save the minutes. The time is now set.
Setting the Source Mode
Press MODE [8] to set the active source mode. This
controls which connection is being used.
The display screen [2] will indicate which mode has
been selected when MODE [8] is pressed.
Display Screen
Connection Mode
FM
BT
USB
CARD
OPTI
AUX1
AUX2
FM radio
Bluetooth®
USB [13]
SD/SDHC card reader [14]
Optical audio input [12]
3.5mm audio input [9]
RCA stereo input [11]
Page 12
Naxa Electronics
Adjusting the Volume
• Use the VOL– and VOL+ keys [6, 7] to decrease or
increase the volume level, respectively.
•
Press the MUTE key on the remote to disable sound
output completely. Press the MUTE key again to
restore sound output.
Using FM Radio Mode
Press MODE [8] to set the active mode to FM.
FM Radio Controls
To do this...
...do this
Tune to a higher frequency
Tune to a lower frequency
Press TUN+
Press TUN–
Auto-tune to a higher station
Press and hold TUN+
Auto-tune to a lower station
Press and hold TUN–
Tune to the next preset station
Press M+
To do this...
...do this
Save a station to preset memory
Press FM SCAN
Scan for stations and auto save
them to preset memory
Press and hold FM
SCAN
Optimizing FM Radio Reception
•
Fully extend the FM antenna wire [15] and position
it for best radio reception.
Automatic Station Scan
Use the station scan feature to find stations within
broadcast reception range and save them to preset
memory.
1. Press and hold the FM SCAN button on the remote.
The sound bar will search for and store stations au-
tomatically.
www.naxa.com
Page 13
Manual Station Preset
To save a station as a preset:
1. Press TUN– or TUN+ to tune to the station you want
to save.
2. Press the FM SCAN button the remote. The display
screen [2] will flash “CH00”.
3. Press M+ on the remote to change the preset sta-
tion (e.g., CH01, CH02).
4. Press FM SCAN to save the station to the selected
preset station.
Using Bluetooth® Mode
Press MODE [8] to set the active mode to BT.
Pairing a Bluetooth® Device
You will need to pair your Bluetooth device with the
sound bar the first time you use them together.
1. Turn the sound bar on and press MODE [8] to set
the active mode to BT. The sound bar will now be
ready to pair with a device.
2. Use your Bluetooth device to search for avail-
able devices. The sound bar will announce itself as
“NAXA-NHS-7008.”
3.
Select NAXA-NHS-7008. Use the pairing code
“0000” if
your device asks for one.
⚠L Make sure Bluetooth® is enabled on your
device. Please refer to the instructions that
came with your device to learn more about
how to connect it to other Bluetooth devices.
Only one device can be paired with the sound
Page 14
Naxa Electronics
bar at a time. Disable Bluetooth on other
devices to prevent interference.
Bluetooth® Controls
To do this...
...do this
Pause or resume playback on a con-
nected device.
Skip to the next track on a con-
nected Bluetooth device.
Skip to the previous track on a con-
nected Bluetooth device.
Press
Press
Press
NFC One-Touch Setup
If you have a device that is equipped with NFC and
Bluetooth, you can pair the device to the sound bar
with a single tap. It’s just that easy!
1. Place the sound bar in Bluetooth® mode (press the
MODE button [8] until “BT” appears on screen.
2. Locate the NFC sensor on the “NFC” sticker on the
sound bar. Touch the back of your device to the sound
bar sensor. The sound bar will detects your device.
3. Your device may ask you for permission to pair with
the sound bar. Select “yes” and pairing is complete!
⚠L Before attempting to use NFC to set up your
Bluetooth connection, make sure that Blue-
tooth and NFC are enabled on your device.
For devices running Android™ OS, you can
find the NFC option in the “Settings > Wire-
less & Networks > More...” menu screen.
www.naxa.com
Page 15
Using AUX 1 Mode
Press MODE [8] to set the active mode to AUX 1.
Using AUX 2 Mode
Press MODE [8] to set the active mode to AUX 2.
Use a 3.5mm AUX cable to connect devices with head-
phone out or line out connectors (e.g., smartphones,
MP3 players, portable audio devices).
Use an RCA stereo patch cable to connect devices with
white and red RCA stereo out connectors (e.g., TVs,
DVD players, camcorders, Hi-Fi stereo and home the-
ater components).
Operate the external device as directed by its manu-
facturer to control playback.
DC 16V
AUX 2
USB
SD/MMC
OPTICAL IN
Operate the external device as directed by its manu-
facturer to control playback.
Page 16
Naxa Electronics
Using OPTI Mode
Press MODE [8] to set the active mode to OPTI.
Use a optical audio patch cable to connect devices with
a optical audio out connector (e.g., TVs, DVRs, Hi-Fi
stereo and home theater components).
Using USB & SD Modes
Install a USB drive or SD memory card and then press
MODE [8] to set the active mode to USB or SD.
Operate the external device as directed by its manu-
facturer to control playback.
⚠L This optical connection only supports the
uncompressed PCM signal format.
Install a compatible USB drive or memory card with
music files on it. Please refer to the Specifications sec-
tion to learn more about compatibility.
⚠L Music files must be saved to the root direc-
tory. The sound bar will not play files that
are saved in a folder.
To do this...
...do this
Pause or resume playback.
Skip to the next track.
Skip to the previous track.
Press
.
Press
Press
.
.
www.naxa.com
Page 17
Warnings and Precautions
Important Safety Information
1. Read Instructions: All the safety and operating instructions should be
read before the product is operated.
2. Retain Instructions: The safety and operating instruction should be
retained for future reference.
3. Heed Warnings: All warnings on the product and in the operating in-
structions should be adhered to.
4. Follow Instructions: All operating and usage instructions should be
followed.
5. Cleaning: Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6. Attachments: Use only attachments recommended by the manufac-
turer. Use of other attachments may be hazardous.
7. Water and Moisture: Do not use this product near water (e.g., near a
bathtub, washbowl, kitchen sink, laundry tub, in wet basements, or
near a swimming pool and the like).
8. Accessories: Do not place this product on an unstable cart, stand, tri-
pod, bracket, or table. Use only with carts, stands, tripods, brackets,
or tables recommended by the manufacturer or sold with the product.
Any mounting of the product should follow the manufacturer’s in-
structions and should use a mounting accessory recommended by the
manufacturer. A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces may cause the
product and cart combination to overturn.
9. Ventilation: Slots and openings in the cabinet are provided for ven-
tilation to ensure reliable operation of the product and to protect it
Naxa Electronics
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of unin-
sulated “dangerous voltage” within the product’s enclosure that
may be of significant magnitude to constitute risk of electric
shock
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operation and ser-
vicing instructions in the literature accompanying the appliance.
CAUTION
• Do not block the ventilation openings or holes.
• Do not place any naked flames (such as lighted candles) on the ap-
• When discarding batteries, follow all local rules and laws governing the
disposal of batteries. Consider the environmental impact of your actions!
• To prevent fire or shock hazard, do not expose this appliance to rain
paratus.
or moisture.
Page 18
14. Outdoor Antenna Grounding: If an outside antenna is connected to
the product, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANS/NFPA 70 provides in-
formation with regard to proper grounding of the mast and support-
ing structure,grounding of the lead-in wire to an antenna-discharge
unit, size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for the
grounding electrode (see figure).
from overheating. These openings should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer in-
structions have been adhered to.
10. Power Sources: This product should be operated only from the type of
power source indicated on the rating label. If you are not sure of the
type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery
power or other sources, refer to the operating instructions.
11. Grounding or Polarization: This product may be equipped with a po-
larized alternating-current line plug that has one blade wider than
the other. This plug will only fit into the power outlet in one direction.
This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the direction of the plug. If the plug should
still fail to fit, contact an electrician to replace the obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
12. Power-Cord Protection: Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at plugs, con-
venience receptacles, and at the point which they exit
from the product.
13. Protective Attachment Plug: The product may be
equipped with an attachment plug with overload
protection. This is a safety feature. See the operat-
ing instructions for replacement or directions to re-
set the protective device. If replacement of the plug is
required, be sure the service technician has used a replace-
ment plug that has the same overload protection as the original plug as
specified by the manufacturer.
15. Lightning: For added protection for this product, unplug it from the
wall outlet and disconnect the antenna or cable system during a
lightning storm or when it is left unattended and unused for long pe-
riods of time. This will prevent damage to the product due to lightning
or power-line surges.
16. Power Lines: An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power cir-
cuits, or where it can fall into such power lines or circuits. When in-
www.naxa.com
Page 19
stalling an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits, as contact with them
might be fatal.
22. Safety Check: Upon completion of any service or repairs to this
product,ask the service technician to perform safety checks to ensure
that the product is in proper operating condition.
17. Overloading: Do not overload wall outlets, extension cords, or inte-
gral convenience receptacles as this can result in a risk of fire or elec-
tric shock.
18. Object and Liquid Entry: Never push objects of any kind into this prod-
uct through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
19. Servicing: Do not attempt to service this product yourself as open-
ing or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
20. Damage Requiring Service: Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the follow-
ing conditions: a) when the power-supply or plug is damaged; b) if
liquid has been spilled or if objects have fallen into the product; c) if
the product has been exposed to rain or water; d) if the product does
not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as
improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the
product to its normal operation; e) if the product has been dropped or
damaged in any way; f) when the product exhibits a distinct change in
performance—this indicates a need for service.
21. Replacement Parts: When replacement parts are required, be sure
that your service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric shock, or
other hazards.
23. Wall or Ceiling Mounting: The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
24. Heat: The product should be situated away from heat sources such as
radiators,heat registers, stoves, or other products (including ampli-
fiers) that produce heat.
WARNING:
This product contains lead, a chemical known to the State of California to
cause cancer and birth defects or other reproductive harm. Wash hands
after handling.
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the lim-
its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful in-
terference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to ra-
dio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be de-
termined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Page 20
Naxa Electronics
• Reorient or relocate the receiving antenna.
•
• Connect the equipment into an outlet on a circuit different from that
Increase the separation between the equipment and receiver.
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION ON MODIFICATIONS
Any changes or modifications not expressly approved by the grantee of
this
the
device
equipment.
authority
granted
operate
may
void
FCC
the
the
by
to
RF Exposure Information
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator and your body.
www.naxa.com
Page 21
Troubleshooting Guide
This guide lists common problems and their solutions.
Please refer to this guide before requesting service.
If you need further assistance, please contact Naxa
Technical Support (www.naxa.com/naxa_support/).
Symptom
Possible Cause
Possible Solution
The sound is
distorted.
The bass level of
the connected de-
vice is too high.
Reduce the bass level of
the connected device.
Press the BASS– button
to reduce the bass level
on the sound bar.
Symptom
Possible Cause
Possible Solution
There is no
power.
The power adapter
is not connected.
Connect the AC/DC
power adapter.
There is no
sound.
The unit is in
Standby mode.
Press
on.
to turn the unit
The volume is set
to the minimum
level.
The connected
device is not in
playback mode.
The input source is
incorrect.
Pres VOL+ to increase
the volume level.
Start playback on the
connected device and
make its volume is set
to a high level.
Check which connection
your device is using and
then press MODE to set
the active mode.
The remote
control is not
working.
The Blue-
tooth® con-
nection is not
working.
The volume level is
too high.
Press VOL– to reduce
the volume level.
The battery is dead. Replace the battery in
the remote control with
a new one.
Reduce the distance be-
tween the Bluetooth®
device and the sound
bar.
Pair the Bluetooth® de-
vice with the sound bar.
The Bluetooth® de-
vice is too far from
the sound bar.
The Bluetooth®
device has not been
paired.
Page 22
Naxa Electronics
Specifications
Speaker Output
Total 50W RMS
2 x 15W (drivers) + 20W (subwoofer)
Display type
LCD (blue)
Removable Media
Support
USB, SD, SDHC (max 32 GB)
Support
If you have problems with your device, please consult
the instructions in this manual. Please also visit us
on the web at www.naxa.com to get up to the minute
news, alerts, and documentation for your device. For
additional assistance, please contact Naxa Technical
Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
http://www.naxa.com/naxa_support/
Playable Formats
MP3, WMA
Radio Tuner Type
Digital FM
20 FM
Radio Preset
Memory
Input
Bluetooth® version 2.1+EDR with A2DP
Optical digital audio
RCA stereo audio
3.5mm AUX audio
Additional Features NFC (one touch setup)
Power Source
AC 100-240V (DC 16V, 3.5A)
Operating Power /
Standby Power
50W/ 1W
<
Note: Product are improved continuously. We reserve the right to modify
the product and specifications without prior notice.
www.naxa.com
Page 23
Barra de sonido de 106,68 cm (42”) con Bluetooth®
NHS-7008
MANUAL DE OPERACIÓN
FAVOR DE LEER ESTE MANUAL COMPLETAMENTE ANTES DE OPERAR ESTE PRODUCTO.
CONSERVAR EL MANUAL PARA FUTURAS REFERENCIAS
Sincronizando el dispositivo Bluetooth®
Ajuste de Un-Toque NFC
Controles de Bluetooth®
Operación del modo de Bluetooth®
Operación del Modo Auxiliar 1
Operación del Modo Auxiliar 2
Operación del Modo OPTI
Operación de los Modos USB y SD
Advertencias y precauciones
Guía rápida para la solución de problemas
Especificaciones
Soporte
15
15
16
16
17
17
18
18
19
23
24
24
Usando el control remoto
Reemplazando las baterías
Sobre una tabla
Sobre la pared
Parte frontal
Control remoto
Índice
Agradecimiento
Contenido en el empaque
Instalación de la Barra de Sonido
Descripción de partes
Fuentes de alimentación
Iniciando
Operación del Radio FM
Encender / Apagar
Ajuste de la hora
Ajuste del modo de fuente
Ajuste del volumen
Controles del Radio FM
Optimizando la recepción del Radio FM
Escaneo automático de las estaciones de FM
Sintonía manual de las estaciones de FM
3
3
4
4
4
7
7
9
10
10
12
13
13
13
13
14
14
14
14
14
15
Agradecimiento
Contenido en el empaque
Sabemos que usted tiene muchas opciones cuando se
trata de tecnología; gracias por elegir los productos de
Naxa Electronics. Fundada en 2001 en Los Ángeles,
California, estamos dedicados a ofrecer productos que
entretienen y satisfacen sus necesidades.
Confiamos en que usted será feliz con su compra. Favor,
de leer atentamente este manual y guárdelo para futura
referencia. Usted también puede encontrar las preguntas
más frecuentes, documentación y otro material del
producto en nuestro sitio web. Venga a visitarnos en
www.naxa.com y ver todo lo que tenemos para ofrecer
•
•
•
Favor de tomar unos momentos para asegurarse de que
se tiene todo lo que se enlista abajo. Aunque hacemos
todo lo posible para asegurarnos de que cada dispositivo
Naxa esté bien empacado y sellado, sabemos que pueden
pasar muchas cosas durante el empacado y transporte. Si
falta algún componente, acudir inmediatamente con el
proveedor para obtener asistencia inmediata. Favor de
contactar al equipo de soporte naxa en
www.naxa.com/naxa...support
Barra de Sonido NHS-7008
Adaptador ca/cc
Juego para instalación en pared
• Control remoto
• Cable de Audio RCA
• Cable de Audio Auxiliar
• Manual de operación
3
Instalación de la Barra de Sonido
Sobre una tabla
Encontrar una superficie plana y nivelada para instalar la
barra de sonido. La mayoría de las personas instala la
barra de sonido centrada de bajo de la TV.
Al colocar la barra de sonido en un centro de
entretenimiento, una estantería, o cualquier tipo de
espacio cerrado, asegurarse de dejar espacio libre
alrededor de la barra de sonido para una adecuada
ventilación. Si la barra de sonido está encerrada en un
espacio reducido sin ventilación adecuada, el calor
generado por la barra de sonido puede producir un riesgo
potencial de calor.
Sobre la pared
Un juego de instalación para pared está incluido en la caja
para su conveniencia. Sin embargo, cada entorno de
instalación es único y tiene sus propios requerimientos; es
posible que tenga la necesidad de material adicional para
preparar la barra de sonido para el montaje.
Se requerira lo siguiente:
Juego de instalación de pared incluido (2 soportes de
pared, 4 tornillos, 4 taquetes)
•
•
Lápiz
• Nivel
• Regla
•
Taladro
• Martillo
(para
instalación sobre paredes secas
solamente)
• Desarmador cruz
4
Naxa Electronics recomienda que la instalación en
2. Usar los soportes para pared como plantilla para
pared sea llevada al cabo por un instalador profesional
marcar un segundo conjunto de puntos en la pared.
calificado. Naxa no se hace responsable de
Asegurase de que los soportes están nivelados antes
accidentes, daños a la propiedad o a la barra de
de marcar la pared y que los puntos estén nivelados
sonido debido a una instalación incorrecta.
entre si.
1. Usar el nivel, regla y lápiz para marcar los puntos en
la pared con una separación de 84.84 cm (33.4”).
Usar el nivel para asegurarse que los puntos estén en
el mismo plano horizontal.
3. Usar el taladro para realizar las perforaciones en los 4
puntos marcados en la pared. Seleccionar el tipo de
broca que sea apropiado para el material de la pared.
Si va usar taquetes (ver punto 4), asegurarse que el
diámetro de la broca coincida con el diámetro de los
taquetes.
4. Para la instalación de los taquetes solamente.
Para pared de madera ver punto 5. Usando el martillo
insertar
suavemente
los
taquetes
en
las
perforaciones.
Los
taquetes
deben
entrar
completamente en las perforaciones.
(Para instalación en paredes de ladrillo u hormigón,
usar taquetes para mampostería, los cuales puede
conseguir en la ferretería).
5. Usar el desarmador y los tornillos para fijar los
soportes. Apretar los tornillos, teniendo cuidado de no
apretar demasiado. Nota:
tener en cuenta
la
5
1. Tornillos
2. Soportes para
pared
3. Taquetes
(opcionales)
orientación de los ganchos en los soportes como se
observa en la imagen.
6. Asegurase de que los soportes están fijados de forma
estable y
firmemente a
la pared. Localizar
las
perforaciones de montaje en la parte posterior de la
barra
de
sonido,
entonces
enganchar
las
perforaciones en los ganchos de los soportes.
84.84 cm (33.4”)
La pared en que los soportes son montados
deben ser lo suficientemente fuerte para soportar
el peso de la barra de sonido y los soportes deben estar
de forma perpendicular al piso.
6
Descripción de Partes
Parte Frontal
1
2
3
4
5
6
7
8
Bocinas
Rango completo y subwoofer interno
Pantalla
Sensor
Remoto
TUN- /
TUN+ /
VOL-
VOL+
Despliega la información del estado de
operación
Detecta la señal proveniente del control
remoto
Sintonía –, Anterior / Regreso rápido
Sintonía +, Siguiente / Avance rápido
Presionar para disminuir el volumen
Presionar para aumentar el volumen
MODE /
Presionar para Encender/Apagar la
unidad.
9
Entrada AUX
1
Presionar para seleccionar el modo de
operación (FM / BT / USB / CARD / OPTI
/ AUX 1 / AUX2)
Modo Auxiliar 1. Conector estéreo de Ø
3.5 mm para la conexión de la salida de
audio dispositivos de audio externos a
través del cable de audio auxiliar de Ø
3.5 mm en los extremos
7
10 Conector
de Vcc
Conectar la salida del adaptador ca/cc
incluido
11 Entrada
AUX 2
Modo Auxiliar 2. Conectores RCA para la
conexión de las salidas de audio
izquierdo/derecho de dispositivos de audio
externos a través del cable RCA
14 Ranura
para
Tarjeta
Modo de CARD. La ranura está diseñada
para la reproducción de archivos de audio
de una tarjeta de memoria. Ver
especificaciones para el tipo de tarjetas de
memoria soportadas
15 Antena
Extender y posicionar la antena para una
óptima recepción de la señal de radio FM.
12 Entrada
Óptica
OPTI
Modo OPTI. Conector de audio óptico
digital para dispositivos de audio externos
con salida de audio óptico digital
13 Puerto USB Modo USB. El puerto USB está diseñado
para la reproducción de archivos de audio
de memorias o dispositivos USB. No está
diseñado para cargar dispositivos
externos.
8
Control Remoto
Presionar para Encender /
Apagar (Espera) la unidad
CLOCK
Presionar y sostener para
ajustar el reloj.
MODE
Presionar para seleccionar el
modo de operación.
Presionar para desactivar la
salida de audio (silencio),
presionar para volver a activarla.
FM
SCAN
TUN- /
Presionar para escanear y
buscar las estaciones de Radio
FM con recepción fuerte
Presionar para sintonizar las
estaciones hacia atrás.
Presionar para saltar a la pista
anterior (BT, USB, SD)
TUN + /
Presionar para sintonizar las
estaciones hacia delante.
Presionar para saltar a la pista
siguiente (BT, USB, SD)
M+
EQ
Presionar para sintonizar la
siguiente estación de Radio FM
preestablecida
Presionar para seleccionar el
modo de ecualización deseado.
9
VOL-
VOL+
BASS-
Presionar para disminuir el
volumen
Presionar para aumentar el
volumen
Presionar para disminuir el
nivel de los sonidos graves
Presionar para iniciar o
pausar la reproducción (BT,
USB, SD)
BASS+
Presionar para aumentar el
nivel de los sonidos graves
TREBLE-
Presionar para disminuir el
nivel de los sonidos agudos
TREBLE+ Presionar para aumentar el
nivel de los sonidos agudos
NHS-7008
Usando el Control Remoto
Antes de usar el control remoto por
primera vez remover el protector de
plástico como se observa en la figura
Apuntar con el transmisor infrarrojo del control remoto
directamente al sensor remoto de la unidad y presionar el
botón deseado.
El control remoto opera dentro de una distancia de 5
metros aproximadamente y una ángulo de 30º respecto a
los costados del sensor remoto.
Sensor Remoto
Obstáculos entre el sensor remoto y el transmisor
infrarrojo pueden provocar que el control remoto no
opere adecuadamente. Los rayos del sol, lámparas
incandescentes y fluorescentes o cualquier otra fuente
luminosa fuerte sobre el sensor remoto de la unidad
pueden provocar que el control remoto no opere
adecuadamente.
Reemplazando las baterias
El control remoto opera con una batería
de 3 Vcc tipo botón “CR2025”.
1. Presionar hacia la derecha sobre el
seguro de la bandeja de la batería y
jalar la bandeja hacia fuera.
2. Remover
la batería gastada e
instalar una batería nueva de litio
(CR2025) en la bandeja, verificando
que el lado positivo de la batería
quede hacia arriba.
Introducir
el
compartimiento hasta escuchar un
clic.
bandeja
en
la
El periodo de vida de la batería en el control
remoto es de aproximadamente 1 año.
Reemplazar la batería si el control remoto no
opera. Desechar las baterías de forma adecuada de
Approx 5
metros
3.
10
5. No intentar cargar baterías que no están diseñadas
para recargarse, estas se pueden sobrecalentar y
explotar.
6. No exponer las baterías a calor excesivo, por ejemplo
bajo los rayos directos del sol, fuego o similares.
7. Limpiar los contactos de la batería así como los del
dispositivo para una adecuada conexión.
acuerdo con las leyes de desechos sólidos de su localidad
para evitar daños al medio ambiente.
Las batería usadas en el control remoto pueden
generar riesgo de fuego o quemaduras químicas
si estás son usadas de forma incorrecta. No
recargar, desarmar, incinerar, golpear o calentar las
baterías. No mezclar baterías nuevas con usadas o de
diferente tipo. Remover las baterías del control remoto si
este no va ser usado por un periodo largo de tiempo.
Mantener las baterías lejos de los niños.
No derramar agua sobre el control remoto, no usar el
control remoto de otro dispositivo al mismo tiempo.
Precauciones sobre las baterías
1. Usar solo el tamaño y tipo de batería especificada.
2. Asegurase de seguir la correcta polaridad al
reemplazar la batería. Una polaridad invertida puede
dañar el control remoto.
3. No mezclar batería de diferente tipo, por ejemplo
alcalinas con zinc-carbón. No mezclar baterías nuevas
con usadas.
4. Si la batería en el control remoto está agotada o si el
control remoto no va ser usado por un periodo largo
de tiempo, remover la batería para prevenir daños o
lesiones por posible fuga de ácido de la batería.
Siempre seguir las instrucciones y recomendaciones
del fabricante de las baterías.
11
Fuente de Alimentación
Usar el adaptador ca/cc para operar la barra de sonido.
1. Conectar el adaptador ca/cc al tomacorriente.
2. Conectar la salida del adaptador al conector de Vcc
(10) de la barra de sonido.
El adaptador ca/cc opera en un rango de voltaje de entrada
de 100-240 V~ solamente. No conectar el adaptador ca/cc
a un tomacorriente con un voltaje diferente al especificado
en el manual y etiquetado, esto puede generar riesgo de
fuego o choque eléctrico.
Desconectar el adaptador ca/cc del tomacorriente y de la
barra de sonido sin no va ser operado por un periodo largo
de tiempo.
No conectar o desconectar el adaptador ca/cc del
tomacorriente o de la barra de sonido con las manos
mojadas o húmedas, esto puede generar riesgo de choque
eléctrico.
No usar el adaptador ca/cc con otro dispositivo
12
Iniciando
Encender / Apagar
enciende.
Para encender la unidad, presionar
. La pantalla se
Ajuste del modo de Fuente
Presionar “MODE” para seleccionar el modo de fuente
deseado. Esto controla que conexión es usada.
La pantalla despliega el modo seleccionado.
Para colocar la unidad en modo de espera (apagada),
presionar
nuevamente y la pantalla despliega la hora.
Despliegue en
pantalla
Ajuste de la hora
La hora se despliega en la pantalla cuando se encuentra en
el modo de espera. Para ajustar la hora:
1. Presionar y sostener “CLOCK” en el control
remoto. Los dígitos de la hora empiezan a destellar.
2. Presionar “” o “” para ajustar la hora mientras esta
hora; los dígitos de los minutos empiezan a destellar.
3. Presionar “” o “” para ajustar los minutos mientras
esta destellando. Presionar “CLOCK” para
salvar los minutos. los dígitos de los minutos
empiezan a destellar.
13
Modo de
Conexión
Radio FM
Bluetooth®
Memoria USB
Tarjeta de memoria SD/SDHC
Entrada de audio óptica
FM
BT
USB
CARD
OPTI
AUX1
AUX2
destellando. Presionar “CLOCK” para salvar la
Entrada de audio de Ø 3.5 mm
Entrada estéreo RCA
Ajuste de volumen
Presionar “VOL-“ o “VOL+” para disminuir o aumentar
el volumen al nivel deseado.
Presionar
en el control remoto para desactivar la
salida de audio (silencio), presionar nuevamente para
volver a activar la salida de audio.
Almacenar una estación en
memoria
Escanear y almacenar
automáticamente en
memoria las estaciones con
señal fuerte
Para….
Hacer….
Presionar FM SCAN
Presionar y sostener FM
SCAN
Operación del Radio FM
Presionar “MODE” para seleccionar el modo de FM.
Controles del Radio FM
Para….
Hacer….
Sintonizar hacia delante
Presionar TUN+
Sintonizar hacia atrás
Presionar TUN-
Sintonía automática hacia
delante
Sintonía automática hacia
atrás
Sintonizar la siguiente
estación almacenada en
memoria
Presionar y sostener TUN+
Presionar y sostener TUN-
Presionar M+
Optimizando la recepción del Radio FM
•
Extender completamente la antena y posicionarla para
lograr una mejor recepción de la señal de Radio FM.
Escaneo automático de las estaciones de FM
Usar la función de escaneo automático para buscar las
estaciones de Radio FM con señal fuerte y almacenarlas
automáticamente en memoria.
1. Presionar y sostener “FM SCAN”; la barra de sonido
inicia el escaneo de las estaciones de Radio FM y
almacena en memorial las estaciones con señal fuerte
localizadas.
14
•
•
Sintonía manual de las estaciones de FM
Para almacenar las estaciones de radio en memoria
manualmente:
Operación del Modo Bluetooth®
Presionar “MODE” para seleccionar el modo de BT.
1. Presionar “TUN-“ o “TUN+” para sintonizar la estación
Sincronizando el dispositivo Bluetooth®
de Radio deseada.
Es necesario primero sincronizar el dispositivo Bluetooth
2. Presionar “FM SCAN” en el control remoto y en la
con la barra de sonido para usarlos al mismo tiempo.
pantalla empieza a destellar “CH00”
1. Encender la barra de sonido y presionar “MODE” para
3. Presionar “M+” en el control remoto para seleccionar
seleccionar el modo de operación BT. La barra de
el número de memoria deseado (por ejemplo, CH01,
sonido está ahora
lista para sincronizarse con
CH02, etc.).
dispositivos Bluetooth.
4. Presionar
“FM SCAN” en el control
remoto
2. Usar el dispositivo Bluetooth para buscar
los
nuevamente para almacenar la estación sintonizada
dispositivos Bluetooth disponibles. En la lista de
en el número de memoria seleccionado.
dispositivos Bluetooth localizados, seleccionar
3. Usar el condigo de sincronización “0000” si el
NAXA-
NHS
- 7008.
dispositivo lo requiere.
Asegurase de que la función de Bluetooth del
dispositivo está habilitada. Favor de referirse al
manual de operación del dispositivo para conocer más de
como conectar con otros dispositivos Bluetooth.
15
Solo un dispositivo puede sincronizarse con la barra de
Android™, puede localizar la opción de la función NFC en
sonido a la vez. Deshabilitar la función de Bluetooth de
la pantalla de menú de “Ajustes > Redes y redes
otros dispositivos para evitar interferencias.
inalámbricas > Mas….”
Ajuste Un-Toque NFC
Si tiene un dispositivo con las funciones de Bluetooth y
NFC, puede sincronizar el dispositivo a la barra de sonido
Controles de Bluetooth®
Para….
Hacer….
con un simple toque. ¡Es demasiado fácil!
Iniciar o pausar la
Presionar
1. Colocar la barra de sonido en el modo de “BT”.
2. Localizar el sensor NFC sobre la etiqueta NFC de la
conectado
reproducción sobre un
dispositivo Bluetooth
barra de sonido. Tocar con la parte posterior del
dispositivo Bluetooth el sensor NCF de la barra de
sonido. La barra de sonido detectara el dispositivo.
3. El dispositivo, solicitara
la confirmación para
sincronizar la barra de sonido. Seleccionar “Yes” y la
sincronización es completada.
Antes de intentar usar la función NFC para realizar
la conexión Bluetooth, asegurarse que las
funciones de Bluetooth y NFC del dispositivo están
habilitadas. Para dispositivos con sistema operativo
16
Saltar a la pista siguiente
Presionar
sobre un dispositivo
Bluetooth conectado
sobre un dispositivo
Bluetooth conectado
Saltar a la pista anterior
Presionar
Operación del Modo Auxiliar 1
Operación del Modo Auxiliar 2
Presionar “MODE” para seleccionar el modo de AUX1.
Presionar “MODE” para seleccionar el modo de AUX2.
Usar el cable de audio auxiliar con conectores estéreo de Ø
3.5 mm para conectar la salida del dispositivo de audio
externo (por ejemplo, teléfonos inteligentes, reproductor
MP3, etc.) al conector de entrada auxiliar “AUX1” de la
barra de sonido.
Usar el cable de audio con conectores RCA para conectar
la salida del dispositivo de audio externo (por ejemplo, TV,
reproductor de DVD, Videocámaras, Estéreos, etc.) a los
conector de entrada RCA Izquierdo y Derecho “AUX2” de la
barra de sonido.
Operar el dispositivo de audio externo para controlar la
reproducción.
Operar el dispositivo de audio externo para controlar la
reproducción.
17
Operación del Modo OPTI
Operación de los Modos USB y SD
Presionar “MODE” para seleccionar el modo de OPTI.
Instalar la memoria USB o la tarjeta de memoria al puerto
Usar un cable de audio óptico (no incluido) para conectar la
Presionar “MODE” para seleccionar el modo USB o SD.
USB o la ranura para tarjeta de la barra de sonido.
salida del dispositivo de audio externo (por ejemplo, TV,
DVR, Estéreos, Teatro en casa, etc.) al conector de
entrada óptica “OPTI” de la barra de sonido.
Instalar la memoria USB o la tarjeta de memoria que
contengan archivos de audio compatibles con la barra de
sonido. Ver especificaciones para más información.
Los archivos de audio deben guardarse en la raíz
del directorio. La barra de sonido no reproduce
archivo guardados en una carpeta.
Iniciar o pausar la reproducción
Saltar a la pista siguiente
Saltar a la pista anterior
Hacer….
Presionar
Presionar
Presionar
18
Operar el dispositivo de audio externo para controlar la
Para….
reproducción.
La conexión óptica solo soporta el formato de
señal PCM sin comprimir.
Advertencias y Precauciones
PRECAUCIÓN: PARA REDUCIR EL RIESGO DE CHOQUE
ELECTRICO NO REMOVER LA CUBIERTA (O TAPA), DENTRO
DE ESTE APARATO NO HAY PARTES QUE EL USUARIO
PUEDA DARLE SERVICIO, ACUDIR A UN CENTRO DE
SERVICIO AUTORIZADO O CON PERSONAL CALIFICADO.
El símbolo del relámpago con punta de flecha
dentro de un triángulo, es diseñado para advertir
al usuario de voltajes peligrosos no aislados
dentro del producto que pueden ser de magnitud
suficiente para constituir riesgo de fuego o
choque eléctrico para las persona.
El símbolo de exclamación dentro de un
triángulo, es para alertar al usuario de la
presencia de instrucciones importantes de
operación, mantenimiento y servicio que se
encuentran dentro de este instructivo
Precaución
•
•
No bloquear las ranuras de ventilación.
No colocar fuentes generadoras de flama (como velas,
veladoras, etc.) sobre la unidad.
19
•
•
•
Al desechar las baterías seguir la reglas de desechos
sólidos de su localidad para evitar daños al medio
ambiente.
Radiación láser invisible peligrosa al abrir y liberar los
seguros. Evitar la exposición a la radiación láser.
Para prevenir riesgo de fuego o choque eléctrico no
exponer esta unidad al goteo o salpicadura de agua, a
la lluvia o humedad.
Importante Información de Seguridad
instrucciones. Deben
1.
las
Leer
las
instrucciones de operación y de seguridad antes de
operar este producto.
leerse
todas
2. Conservar
las
las
instrucciones de operación y seguridad para futuras
referencias.
instrucciones. Deben conservarse
3. Poner atención a las advertencias. Todas las advertencias
en el producto y las instrucciones de operación y
seguridad deben de respetarse.
4. Seguir
las
instrucciones. Deben seguirse
todas
las
5.
instrucciones de uso y operación.
Limpieza. Desconectar el cordón de alimentación del
tomacorriente antes de darle mantenimiento o limpieza al
reproductor. Limpiar con una tela, suave, limpia y seca,
No usar limpiadores líquidos o en aerosol.
6. Accesorios.
Usar
solo
accesorios/refacciones
recomendados por el fabricante.
7. Agua y humedad. No usar este producto cerca del agua,
por ejemplo cerca de una bañera, lavabo, fregadero de
cocina o de lavar, sótanos húmedos o cerca de una
piscina.
un
en
producto
lesiones y daños a
8. Manejo y desplazamiento. No colocar
este
carrito,
plataforma, repisa o mesa inestables,
el producto puede caerse generando
serias
las
personas y/o al producto. Usar este
carrito,
producto
plataforma,
mesa
recomendado por el fabricante o vendido con el producto.
La combinación del producto y de un carrito debe
moverse con cuidado. Las paradas repentinas, fuerza
excesiva y las superficies desniveladas pueden generar
que el producto y el carrito se vuelquen.
con
repisa
el
o
solo
9. Ventilación. Las ranuras y aberturas en la parte posterior
y posterior del gabinete son provistas para la ventilación y
asegurar la buena operación del producto y protegerlo del
sobrecalentamiento. No deben bloquearse o taparse
estas aberturas, colocando el producto sobre una cama,
sofá alfombra u otra superficie similar. El producto no
debe colocarse cerca o sobre un radiador o fuentes de
calor. Este producto no debe colocarse en un librero o
estante que impida el flujo del aire a través de las ranuras
de ventilación.
10. Fuentes de alimentación. Este producto debe ser operado
solo con los tipos de fuentes de alimentación indicados en
la etiqueta de marcado, si no está seguro del tipo de la
fuente de poder de su casa, consultar con su proveedor o
con la compañía de electricidad local. Para producto
diseñados para operar con baterías u otras fuentes,
referirse al manual de operación.
11. Terminal de
tierra y polarización. No eliminar
la
característica de seguridad de una clavija polarizada o
clavija con terminal a tierra, esta es una medida de
seguridad. Una clavija polarizada cuanta con dos
terminales con una terminal más ancha que la otra. Una
20
si
tampoco
volteándola;
clavija con terminal a tierra cuenta con dos terminales con
una tercera terminal con conexión a tierra. Si la clavija no
entra completamente en el tomacorriente, intentar meterla
entra
nuevamente
completamente consultar a un electricista o personal
calificado para reemplazar el tomacorriente obsoleto.
12. Protección del cordón de alimentación. El cordón de
alimentación debe colocarse de forma tal que no exista
probabilidad de pisarlo o apretarlo sobre los lugares
donde será colocado o contra el producto mismo. Poner
atención particular en el cordón,
la clavija, el
tomacorriente y en los puntos en donde estos salen del
producto.
13. Clavija con protección. Este producto puede contar con
una clavija con protección contra sobrecarga. Esta es una
característica de seguridad. Ver las instrucciones de
operación para reemplazar o restablecer el dispositivo de
protección. Si requiere reemplazar la clavija, asegurarse
que se use una clavija con protección contra sobrecarga
original y de las mismas características de acuerdo a lo
especificado por el fabricante.
14. Antena exterior. Si una antena exterior es conectada en el
producto, asegurar de que el sistema de antena es puesto
a tierra para proveer protección contra sobre voltaje y
cargas de corriente estática acumulada. La sección 810
del NEC (National Electrical Code), ANSI/NFPA 70,
Provee información respecto a la apropiada puesta a
tierra del poste y la estructura de soporte, cables
principales, productos de descarga de la antena, tipos de
conductores a tierra, localización de los puntos de
descarga de la tierra, conexión a tierra de los electrodos y
los requisitos de los electrodos de conexión a tierra (ver
figura).
Cable de la
antena
Aparato Eléctrico
- Electrónico
Unidad de descarga
de antena (NEC
Sección 810-20)
Conductores a tierra
(NEC Sección 810-21)
Sistema de electrodos
de conexión a tierra
(NEC Art 250, Parte H)
líneas o circuitos eléctricos, el contacto con ellos puede
resultar fatal.
17. Sobrecarga. No sobrecargar los tomacorrientes, cordones
de extensión y los receptáculos ya que pueden generar
riesgo de fuego o choque eléctrico.
18. Entrada de objetos y líquidos. No introducir objetos de
cualquier tipo dentro de este producto a través de las
ranuras o aberturas, estos pueden llegar a tocar puntos
de voltaje peligroso o salidas que pueden resultar en
riesgo de fuego o choque eléctrico. No derramar o rociar
cualquier tipo de líquido sobre las ranuras de ventilación
del producto.
19. Servicio. No intentar dar servicio usted mismo a este
producto, abriendo o removiendo las cubiertas, puede
exponerse a voltajes peligrosos u otros riesgos.
20. Daños que requieren servicio. Desconectar el producto
del tomacorriente de pared y acudir a un centro de
servicio autorizado o con personal calificado bajo las
siguientes condiciones
a) Cuando la clavija o el cordón de alimentación estén
dañados.
b) Cuando ha sido derramado liquido o han caído objetos
en el interior del producto.
c) Si el producto ha sido expuesto a la lluvia o agua.
d) Si el producto no opera adecuadamente siguiendo las
instrucciones de operación. Ajustar solo los controles
que son indicados en este manual de operación. El
ajuste de otros controles puede ocasionar daños y a
menudo se requiere de trabajo excesivo del servicio
técnico para restablecer la operación normal del
producto.
e) Si el producto se ha caído o golpeado o si la cubierta
está dañada.
f) Si el producto exhibe cambios en su funcionamiento
21
normal.
Abrazaderas a tierra
Abrazaderas a tierra
15. Tormentas eléctricas o periodos sin uso. Desconectar
este producto del
tormentas
eléctricas o cuando va ser usado por un periodo largo de
tiempo para protegerlo. También desconectar la antena
exterior o el sistema de cable. Esto protege al producto de
daños debido a los rayos o sobre líneas de poder.
tomacorriente durante
16. Líneas de poder. No debe de colocarse un sistema de
antena exterior cerca de las líneas eléctricas aéreas,
luces o circuitos eléctricos, o donde pueda caer sobre
dichas líneas eléctricas o circuitos. Al instalar un sistema
de antena exterior, tener mucho cuidado de no tocar las
Todo lo anterior indica la necesidad de darle servicio al
producto.
21. Reemplazo de partes. Cuando es necesario el reemplazo
de partes, asegurarse que el servicio técnico use partes
especificadas por el fabricante o que tengan las mismas
características que las partes originales. El reemplazo de
partes no autorizadas puede resultar en fuego, choque
eléctrico u otros riesgos.
22. Verificar las medidas de seguridad. Una vez que se ha
completado cualquier tipo de servicio o reparación a este
producto, solicitar al técnico de servicio que realice las
pruebas de seguridad para poder determinar que el
producto está en condiciones apropiadas de operación.
23. Colocación en la pared o techo. El producto debe de
colocarse en la pared o techo de acuerdo a como lo
especifica el fabricante.
24. Calor. El producto debe colocarse lejos de fuentes de
calor como radiadores, registros de calor, estufas u otros
productos que producen calor (incluso amplificadores).
ADVERTENCIA
Este producto contiene plomo, una sustancia química que en
algunos países se conoce como causante de cáncer, defectos
de nacimiento u otros daños reproductivos. Lavarse las
manos después de operarlo.
NOTICIA FCC
Este dispositivo cumple con la parte 15 de las reglas FCC. La
operación del aparato está sujeta a las dos siguientes
condiciones: (1) Este aparato no puede causar interferencia
perjudicial y (2) este aparato debe aceptar cualquier
22
interferencia recibida, incluyendo interferencias que puedan
causar un funcionamiento no deseado.
Nota: Este dispositivo ha sido probado y cumple con las
limitaciones de un equipo digital Clase B, de acuerdo con la
Parte 15 de las Normas FCC. Estos límites están diseñados
para permitir una protección razonable contra interferencia
dañina en una instalación residencial. Este equipo genera, usa
y puede emitir energía de frecuencia radial y, de no ser
instalado y utilizado de acuerdo con las instrucciones, puede
causar interferencia dañina a las comunicaciones radiales. Sin
embargo, no existe garantía de que la interferencia no pueda
ocurrir en una instalación particular. Si este equipo causa una
interferencia dañina a la recepción de la radio o la televisión, lo
cual se puede determinar encendiendo y apagando el equipo,
se recomienda al usuario tratar de corregir la interferencia
mediante una o más de las siguientes medidas:
• Orientar nuevamente o reubicar la antena receptora.
• Aumentar la separación entre el equipo y el receptor.
• Conectar el equipo a una salida de un circuito diferente al
receptor.
televisión.
• Consultar a su proveedor o a un técnico de Radio y
PRECAUCION SOBRE MODIFICACIONES
Cualquier cambio o modificación no expresamente aprobada
por la parte responsable del cumplimiento puede anular la
autoridad del usuario para operar este reproductor.
Guía rápida para la solución de
problemas
Esta guía presenta los problemas más comunes y la posible
solución. Favor de referirse a la guía antes de acudir al centro
de servicio autorizado. Si requiere futura asistencia, favor de
contactar la página de soporte técnico:
www.naxa.com/naxa_support/.
Problema
No enciende El adaptador ca/cc
no está conectado
Causa
Problema
La salida de
audio esta
distorsionada
Causa
El nivel de los
sonidos graves del
dispositivo de audio
externo conectado
es demasiado alto
La barra de sonido
está en modo de
espera
El volumen está
ajustado al mínimo
El dispositivo de
audio externo
conectado está en
modo detenido o de
pausa
La fuente de entrada
es incorrecta
No hay
salida de
audio
Solución
Conectar el
adaptador ca/cc al
tomacorriente y a la
barra de sonido
Presionar el botón de
poder para encender
la barra de sonido
Presionar “VOL+”
para aumentar el
nivel de la salida de
audio
Iniciar la reproducción
del dispositivo de
audio externo y
ajustar el nivel de la
salida de audio
Verificar la conexión
que está usando y
presionar “MODE”
para seleccionar el
modo correcto
El nivel de volumen
es demasiado alto
El nivel de carga de
la batería es
demasiado baja
Hay obstáculos entre
el transmisor
infrarrojo del control
remoto y el sensor
remoto de la barra
de sonido
El dispositivo
Bluetooth® está
demasiado lejos de
la barra de sonido
El dispositivo
Bluetooth® no ha
sido sincronizado
El control
remoto no
opera
La conexión
Bluetooth®
no opera
23
Solución
Reducir el nivel de
los sonidos graves
del dispositivo de
audio externo.
Presionar “BASS-“
en la barra de
sonido para reducir
el nivel de los
sonidos graves
Presionar “VOL-”
para disminuir el
nivel de la salida de
audio
Reemplazar la
batería del control
remoto
Apuntar
directamente con el
control remoto al
sensor remoto de la
barra de sonido
Reducir la distancia
entre el dispositivo
Bluetooth® y la
barra de sonido
Sincronizar el
dispositivo
Bluetooth® con la
barra de sonido
Nota: Las especificaciones y diseño de este producto están
sujetos a cambios sin previo aviso para mejoras de los
mismos.
Soporte
Si tiene problemas con la operación del reproductor, favor
de consultar las instrucciones en este manual, asi como las
ultimas noticias, recomendaciones y documentación que
puede encontrar en nuestra pagina web www.naxa.com. Si
necesita asistencia futura, favor de contactar al centro de
servicio autorizado.
http:/www.naxa.com/naxa_support/
HECHO EN CHINA
Sintonizador digital FM
Pantalla de cristal líquido (Azul)
50 Wrms totales
2 x 15 W + 20 W (Subwoofer)
Especificaciones
Salida para bocinas:
Pantalla:
Memorias soportadas: USB, SD, SDHD (32 GB máximo)
Formatos soportados: Archivos de audio MP3, WMA
Radio:
Memorias de Radio FM: 20 memorias máximo
Entradas:
Características adicionales: NFC (Ajuste de un toque)
Fuente de alimentación:
Potencia (operación):
Potencia (modo de espera): <1 W
Bluetooth Version 2.1 + EDR con A2DP
Audio óptico digital
Audio estéreo RCA
Audio Auxiliar de Ø 3.5 mm
Adaptador ca/cc
Entrada: 100-240 Vca
Salida: 16 Vcc 3.5 A
50 W
24
1 | Label and location | ID Label/Location Info | 505.92 KiB | August 05 2021 |
品号 32277351000101
深圳市君兰电子有限公司
ShenZhen JunLan Electronic LTD
JUNLAM
比例
1:1
客户名称
客户型号
本司机型
单 号
NAXA
NHS-7008
SBB-20031
JLR210475B
制造尺寸
包装类别
品 号
设计/日期
文福远
贴 纸
装柜尺寸
材 质
确认签字
用量
版本/版次:A/0
整机重量
单位:mm
跟单
结构
电子
安规
标准化
编号:RD-FM-044 A/0
42 inch Sound Bar with Bluetooth
16V
3.0A
4295-09-2021
铭牌贴纸:
尺寸:70*40mm
材质:不干胶,过光胶,黑底白字
单机用量:1PC
深圳市君兰电子有限公司
ShenZhen JunLan Electronic LTD
JUNLAM
比例
1:1
客户名称
客户型号
本司机型
单 号
NAXA
NHS-7008
SBB-20031
JLR210475B
制造尺寸
包装类别
品 号
设计/日期
文福远
铭牌贴纸
装柜尺寸
材 质
确认签字
用量
版本/版次:A/0
整机重量
单位:mm
跟单
结构
电子
安规
标准化
编号:RD-FM-044 A/0
1 | Declaration Letter of Model Difference | Cover Letter(s) | 71.69 KiB | August 05 2021 |
Shenzhen Junlan Electronic Ltd
Add: No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New
District, Shenzhen China
Date: 2021-8-4
FCC ID: OKUSBB20031
Dear Sir/Madam,
We, Shenzhen Junlan Electronic Ltd Hereby declares the following statement for Federal
Communications Commission, PCB board, circuit, structure and internal of these model(s) are
the same, Only model number is different for these model:
Product name: 42 inch Sound Bar with Bluetooth
Model no.: NHS-7008, SBB-20031
Sincerely,
Name/Title:
Company:
Address:
Phone:
Fax:
E-Mail:
peng xiao/safety engineer
Shenzhen Junlan Electronic Ltd
No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan
New District, Shenzhen China
0755-27309169
0755-27309497
xp@jump-lan.com
1 | FCC Confidentiality request letter | Cover Letter(s) | 109.99 KiB | August 05 2021 |
CONFIDENTIALITY REQUEST
for Certification Service in USA
Federal Communication Commission
Equipment Authorization Division, Application Processing Branch
7435 Oakland Mills Road
Columbia, MD 21046
Date:<2021-8-4>
Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and
Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for
the following products:
FCC ID
OKUSBB20031
Model name
NHS-7008
For the product stated above, we request that the following information be held
confidential;
Exhibits
Long-Term
Confidentiality
Short-Term
Confidentiality
Short-Term
Confidentiality Days
External Photos
Internal Photos
Block Diagram
Schematics
Test Setup Photos
User’s Manual
Parts List
Tune Up
Operational Descriptions
The long-term confidentiality exhibits contain our trade secrets and proprietary
information that could be of benefit to our competitors.
The short-term confidentiality on the basis of ensuring that business sensitive
information remains confidential until the actual marketing of our new device.
If you have any questions, please feel free to contact me at the address shown below.
Name/Title: peng xiao/safety engineer
Company:
Address:
Shenzhen Junlan Electronic Ltd
No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan
New District, Shenzhen China
0755-27309169
0755-27309497
xp@jump-lan.com
Phone:
Fax:
E-Mail:
Sincerely,
1 | Power of Attorney Letter | Cover Letter(s) | 69.09 KiB | August 05 2021 |
Shenzhen Junlan Electronic Ltd
No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen China
Federal Communications Commission
Authorization and Evaluation Division
Equipment Authorization Branch
7435 Oakland Mills Road
Columbia, MD 21046
To whom it may concern:
2021-8-4
We, Shenzhen Junlan Electronic Ltd the undersigned, hereby authorize Eurofins Product Service
GmbH to act on our behalf in all matters relating to applications for equipment authorization
FCC ID: OKUSBB20031 including the signing of all documents related to these matters.
Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same
effect as acts of our own.
We also hereby certify that no party to this application is subject to a denial of benefits, including
FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862.
peng xiao/safety engineer
Shenzhen Junlan Electronic Ltd
No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan
New District, Shenzhen China
0755-27309169
0755-27309497
xp@jump-lan.com
Sincerely,
Name/Title:
Company:
Address:
Phone:
Fax:
E-Mail:
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-08-05 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2021-08-05
|
||||
1 | Applicant's complete, legal business name |
Shenzhen Junlan Electronic Ltd
|
||||
1 | FCC Registration Number (FRN) |
0021880893
|
||||
1 | Physical Address |
No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District
|
||||
1 |
No.277 PingKui Road, Shijing Community
|
|||||
1 |
Shenzhen, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
j******@eurofins.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
OKU
|
||||
1 | Equipment Product Code |
SBB20031
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
p**** x****
|
||||
1 | Title |
safety engineer
|
||||
1 | Telephone Number |
0755-********
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
x******@jump-lan.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 42 inch Sound Bar with Bluetooth | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen Global Test Service Co., Ltd.
|
||||
1 | Name |
J**** L********
|
||||
1 | Telephone Number |
0755-********
|
||||
1 |
l******@gtscert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0035000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC