all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 4.36 MiB | June 10 2022 | |||
1 |
|
Internal Photos | Internal Photos | 1015.46 KiB | June 10 2022 | |||
1 |
|
External Photos | External Photos | 605.66 KiB | June 10 2022 | |||
1 |
|
Label and location | ID Label/Location Info | 173.01 KiB | June 10 2022 | |||
1 |
|
Agent Authorization Rev 1.0 | Cover Letter(s) | 63.30 KiB | June 10 2022 | |||
1 | BlockDiagram | Block Diagram | June 10 2022 | confidential | ||||
1 |
|
FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 95.87 KiB | June 10 2022 | |||
1 |
|
Model Statement | Cover Letter(s) | 64.28 KiB | June 10 2022 | |||
1 | Operation Description | Operational Description | June 10 2022 | confidential | ||||
1 |
|
RFExposure | RF Exposure Info | 454.29 KiB | June 10 2022 | |||
1 | SCH | Schematics | June 10 2022 | confidential | ||||
1 |
|
Test Report | Test Report | 3.37 MiB | June 10 2022 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 238.77 KiB | June 10 2022 |
1 | User Manual | Users Manual | 4.36 MiB | June 10 2022 |
42INCH Slim Sound Bar System with Bluetooth INSTRUCTION MANUAL PLEASE READ BEFORE OPERATING THIS DEVICE IMPORTANT SAFETY INSTRUCTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. FCC WARNING:
To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 1 IMPORTANT SAFETY INSTRUCTION
2 17) Overloading Do not overload wall outlets and extension cords as this can result shock. in a risk of fire or electric 18) Object and liquid entry Never push objects of any kind into the product voltage points or short out parts that could result type of liquid on the product. 19) Outdoor antenna grounding through openings as they may touch dangerous in fire or electric shock. Never spill or spray any If an outside antenna is connected to the product, be sure the antenna system is grounded so as to Provide some protection against voltage surges and built up static charges. Section 810 of National Electric Code ANSI/NFPA 70 provides information with respect of size of grounding conductors, location of antenna-discharge product, connection to grounding electrodes and requirements for the grounding electrodes. the lead-in wire to an antenna discharge product, the mast and supporting structure, grounding of the to proper to grounding 20)Service 21)Replacement parts Do not attempt dangerous voltage or other hazards. Refer all servicing to qualified service personnel. to service this product yourself as opening or removing covers may expose you to When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. 22)Safety check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that is in proper operational condition. the product 23) Wall or ceiling mounting 24)Damage requiring service The product should be mounted to a wall or ceiling only as recommended by the manufacturer. from the wall outlet and refer service to qualified service personnel under the Unplug this product following conditions. a) When the power-supply cord or plug is damaged. b) c) d) liquid has been spilled or objects have fallen into the product. the product has been exposed to rain or water. the product does not operate normally by following the operating instructions. Adjust only If If If those controls that are covered by the operating instructions, as an adjustment of other controls may result to restore in the product If in damage and will and require extensive work by a qualified technician e) f ) When the product exhibits a distinct change in performance-this indicates a need for service. the product has been dropped or the cabinet has been damaged. to its normal operation. 25)Note to CATV system installer This reminder is provided to call NEC that provides guidelines for proper grounding and, in particular, specifies that ground shall be connected to the grounding system of entry as practical. the CATV system installer's attention to Article 820-40 of the building, as close to the point of cable the cable the NOTE: Refer all servicing to qualified service personnel Servicing is required when the unit has been damaged in any way such as the following: the power-supply cord or plug has been damaged, liquid has been spilled into unit, the unit has been exposed to rain or moisture, the unit has been dropped or the unit does not operate normally. 3 INSTALLATION 1. Placing on the table When placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard. WALL 2. Mounting the Speaker Bar onto a wall We recommend having this speaker professionally mounted. By using the included wall mounting accessories, the sound bar can be mounted onto a wall. Distance between two brackets 27.13 inches 4 2.1 Mounting on wood walls You may use 27.13 inches 2 pieces screws
(Included) 1.Use a pencil to make 2 marks 27.13" apart for the mounting screws. 2.Drill the supplied screws directly into the marks on the wall, allowing 0.3" of the screws to extend from the wall. 3.Make sure the screws are firm and stable, then hang the sound bar from the mounting screws. 2.2 Mounting on dry wall
:llaw nedoow eht no gnitnuoM 2.2 You may use 2 pieces screws
(Included) 2 pieces plastic inserts
(Included) 1.Use a pencil to make 2 marks 27.13" apart for the mounting screws. 2.Use a 7/32" bit to drill 2 holes at the marks on the wall. 3.Push the supplied plastic inserts into the drilled holes. If necessary, gently tap them into place with a hammer. 4.Screw the supplied screws into the inserts, allowing 0.3" of the screws 5.Make sure the screws are firm and stable, then hang the sound bar from to extend from the wall. the mounting screws. 27.13 inches
(1)
(2) 5 CONTROLS AND CONNECTIONS SOURCE INDICATOR FRONT VIEW REAR VIEW A DC IN DC 12V,1.0A R L OPTICAL IN AUX 1 OPTICAL IN Jack AUX 1 Jack DC IN Power Jack CONTROL PANEL Volume Up Button Power (Standby) Button Volume Up Button AUX 2 Jack Source Button 6 1 2 3 4 5 6 7 8 REMOTE CONTROL 1. SOURCE 2. STANDBY 3. VOL-(volume down) 4. BASS-(bass down) 5. TREBLE-(treble down) 6. EQ (equalizer) 7. PREVIOUS 8. PLAY/PAUSE 9. MUTE 10. VOL+ (volume up) 11. BASS+ (bass up) 12. TREBLE+ (treble up) 13. NEXT 9 10 11 12 13 7 BATTERY INSTALLATION
-First Time Use Remove and discard the insulation tab as shown in Figure 1.
-Replacing Batteries For Remote Control 1. Push and slide out the battery holder (see Figure 2). 2. Replace the battery with a new CR2025 button cell, taking care to observe the polarities marked on the rear of the Remote Control (see Figure 3). 3. Close the battery holder (see Figure 3). Fig.1 Fig.2 Fig.3 BATTERY PRECAUTIONS 2. Be sure to follow the correct polarity as indicated in the battery compartment when installing the battery. A battery installed in the reverse position may damage the device. 4. If the batteries in the device are depleted or the device is not to be used for a long time, remove the batteries to prevent damage or injury from possible battery leakage. Always follow the battery manufacturer's instructions and recommendations. 5. Do not recharge batteries that are not intended to be recharged; they may overheat and rupture. 6. Do not expose batteries to excessive heat (e.g., direct sunlight, fire, or the like.) 8 POWER SOURCE POWER SOURCE To turn the speaker on Use the suppplied AC/DC adapter to connect the POWER jack of the unit to a compatible power source; the indicator will turn red. Press the POWER button to turn the unit on. To turn the speaker off Press the POWER button on the remote or hold the POWER button on the side of the unit. NOTE:
Disconnect the power adapter if the unit will not be used for a long time. AUX 1 SOURCE AUX 1 sources may include:
TV/DVD/VCR AUX 1 connection 1. Use an AV cable to connect the audio output jacks (white jack=L, red jack=R) of the source device (e.g., a TV) to the AUX 1 audio input jacks found on the rear of the unit. 2. Turn on the unit. Press the SOURCE button until the indicator turns green. Start playback on the source device. NOTE: If there is no sound or if the volume is not loud enough, try increasing the volume on the source device. Audio Out Jacks of TV/DVD/VCR/DVR 1 XUA oT the Sound Bar Jacks of R L AUX 1 During playback
- Press the MUTE button to disable the sound. Press MUTE again to reenable the sound.
- Press the VOLUME+/ buttons to adjust the volume level.
- Press the BASS+/ buttons to adjust the bass level.
- Press the TREBLE+/ buttons to adjust the treble level.
- Press the EQ button to switch between POP, JAZZ, CLASSIC, and ROCK equalizer settings. 9 AUX 2 SOURCE sources may include:
AUX 2
- Personal audio players
- Personal computers or laptops connection:
AUX 2 1. Use a stereo 3.5mm jack cable (supplied) to connect the headphone (or LINE/Audio) output of the source device (e.g., an iPod) to the AUX 2 audio input jack found on the side of the unit. 2. Turn on the unit. Press the SOURCE button until the indicator turns orange. Start playback on the source device. NOTE: If there is no sound or if the volume is not loud enough, try increasing the volume on the source device. 2 XUA mm5.3 oT jack on the Sound Bar Connect to the 3.5mm Audio Out jack of external audio devices including Tablets, Laptops, Smartphones, MP3 Players, etc. 3.5mm Aux In Cable (Included) During playback
- Press the MUTE button to disable the sound. Press MUTE again to reenable the sound.
- Press the VOLUME+/ buttons to adjust the volume level.
- Press the BASS+/ buttons to adjust the bass level.
- Press the TREBLE+/ buttons to adjust the treble level.
- Press the EQ button to switch between POP, JAZZ, CLASSIC, and ROCK equalizer settings. 10 OPTICAL IN SOURCE Connection 1. Follow the figure below to make the connections. 2.Turn the unit on. Press the SOURCE button until the indicator turns purple. NOTE:
Not all entertainment systems are set up the same way; the diagram below is only one example of how the connection can be made. The optical connection supports the PCM format, only. Optical Out of TV/DVD/Etc.
(referred to as Digital Out on some devices) OPTICAL OUT Optical Cable (not included) DC IN DC 12V,1.0A R L OPTICAL IN AUX 1 Optical In jack on the rear panel of the Sound Bar During playback
- Press the MUTE button to disable the sound. Press MUTE again to reenable the sound.
- Press the VOLUME+/ buttons to adjust the volume level.
- Press the BASS+/ buttons to adjust the bass level.
- Press the TREBLE+/ buttons to adjust the treble level.
- Press the EQ button to switch between POP, JAZZ, CLASSIC, and ROCK equalizer settings. 11 BLUETOOTH SOURCE Pairing 1. Press the SOURCE button until the indicator turns blue. 2. Enable Bluetooth on the source device. 3. Set the source device to search for other Bluetooth devices. (Refer to the user device if you need help with this step.) Select the sound bar finds it. If the device prompts you from a pass code, enter "0000". manual of your NAXA NHS-2007 when the device 4. After a successful pairing, you will be able to stream music wirelessly from your source device to the sound bar. Some devices may allow you to control playback from the sound bar;
otherwise, control playback on the device. 5. If the pairing attempt fails, the sound bar may have timed out. Try starting the pairing procedure again. NOTE: Only one device can be paired with the sound bar at a time. Disable Bluetooth on other devices to prevent interference. The sound bar will try to reconnect automatically with the last paired device when it is placed in Bluetooth mode. If the Bluetooth connection is lost due to external factors, or it will not reconnect automatically, you may need to pair again with the NAXA NHS-2007. Clear the NAXA NHS-2007 from the Bluetooth Devices list on your source device before pairing again. NFC 1-Touch Setup If you have a device that is equipped with NFC and Bluetooth, you can pair the device to the sound bar with a single tap. Its just that easy!
1. Place the sound bar in Bluetooth mode (press the SOURCE button until the indicator turns blue). 2. Locate the NFC sensor on the top right side of the sound bar. Touch the back of your device to the sound bar sensor. The sound bar will sound a chime when it detects your device. 3. Your device may ask you for permission to pair with the sound bar. Select yes. 4. The sound bar will emit another chime when pairing is complete. NOTE: Before attempting to use NFC to set up your Bluetooth connection, make sure that Bluetooth and NFC are enabled on your device. For devices running Android OS, you can find the NFC option in the Settings > Wireless & Networks > More... menu screen. Only one device can be paired with the sound bar at a time. Disable Bluetooth on other devices to prevent interference. 12 TROUBLE SHOOTING GUIDE Check the followings before requesting service SYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION Power adapter not connected Connect the adapter The unit is in Standby mode No power No sound Remote control not working AUX 1 / AUX 2 not working No response from Bluetooth source Press the Standby button on the unit or remote control to power on the unit. Raise volume level by pressing the VOL (Volume)+Button Volume in minimum position The connected device is not in payback mode Play the music/movie in the connected device Sound output of the device weak The batteries in the remote control are exhausted Wrong source is selected Wrong source is selected Raise volume level of the connected device Replace with new battery Press source button until indicator turns green (AUX 1) / orange (AUX 2) Press source button until indicator turns Blue The unit is connected with another Bluetooth device Disconnect the connection and retry. The connected device is Deactivated Activate the connected device and start the playback SPECIFICATIONS Audio output ................................................................................................................................10W Power source of the remote control.........................................................DC 3V 1 x CR 2025 battery Power source of the power adapter .............................................................AC 110-240V~50/60 Hz Output of the power adapter ......................................................................... DC 12V, 1.0 A ACCESSORIES 1 x Instruction Manual 1 x Remote Control with CR 2025 button cell 1 x Stereo audio connection cable with 3.5mm stereo plug 1 x RCA line in cable 1 x Adapter 2 x Screws 2 x Wall plugs 13 SUPPORT If you have problems with your sound bar, please consult the instructions in this manual, as well as the latest news, alerts, and documentation which can be found by visiting us on the web at www.naxa.com. If you need further assistance, please contact Naxa Technical Support. NAXA Technical Support 2320 East 49th St. Vernon, CA 90058 http://www.naxa.com/naxa_support/
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body 2014 NAXA ELECTRONICS CORPORATION. ALL RIGHTS RESERVED. Naxa is a registered trademark of Naxa Electronics, Inc. Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. Android is a trademark of Google Inc. All other trademarks and logos are property of their respective owners unless indicated otherwise. SISTEMA DE SONIDO PARA TV TIPO BARRA CON BLUETOOTH NHS-2007 MANUAL DE OPERACIN FAVOR DE LEER COMPLETAMENTE ANTES DE INSTALAR Y OPERAR LA ANTENA AMPLIFICADORA. CONSERVAR EL MANUAL PARA FUTURAS REFERENCIAS IMPORTANTES INSTRUCIONES DE SEGURIDAD PRECAUCIN: PARA REDUCIR EL RIESGO DE CHOQUE ELCTRICO NO REMOVER LA CUBIERTA (O TAPA), DENTRO DE ESTE PRODUCTO NO HAY PARTES QUE EL USUARIO PUEDA DARLE SERVICIO, EN SU CASO ACUDIR A UN CENTRO DE SERVICIO AUTORIZADO O CON PERSONAL CALIFICADO. ADVERTENCIA:
PARA PREVENIR RIESGO DE FUEGO O CHOQUE ELCTRICO, NO EXPONER ESTE PRODUCTO A LA LLUVIA, HUMEDAD, GOTEO O SALPICADURA DE AGUA. ADVERTENCIA:
PARA PREVENIR RIESGO DE FUEGO O CHOQUE ELCTRICO, Y CUALQUIER TIPO DE INTERFERENCIA USAR SOLO ACCESORIOS RECOMENDADOS. ADVERTENCIA FCC:
Para asegurar un cumplimiento continuo, seguir las instrucciones de instalacin adjuntas y usar solo cables blindados al conectar a otros dispositivos. Cambios o modificaciones a esta unidad no expresamente aprobados por la parte responsable para el cumplimiento puede anular la autoridad para operar la unidad. El smbolo de un rayo con punta de flecha dentro de un triangulo equiltero es una seal de advertencia, alertando de "voltaje peligroso" no aislado en el interior del producto que puede ser de suficiente magnitud para constituir un riesgo de choque elctrico para las personas. El smbolo de exclamacin dentro de un triangulo equiltero indica al usuario de instrucciones importantes de mantenimiento, servicio y operacin que acompaan al producto. NOTICIA FCC Este equipo ha sido probado y cumple con las limitaciones de un equipo digital Clase B, de acuerdo con la Parte 15 de las Normas FCC. Estos lmites estn diseados para permitir una proteccin razonable contra interferencia daina en una instalacin residencial. Este equipo genera, usa y puede emanar energa de frecuencia radial y, de no ser instalado y utilizado de acuerdo con las instrucciones, puede causar interferencia daina a las comunicaciones radiales. Sin embargo, no existe garanta de que la interferencia no pueda ocurrir en una instalacin particular. Si este equipo causa una interferencia daina a la recepcin de la radio o la televisin, lo cual se puede determinar encendiendo y apagando el equipo, se recomienda al usuario tratar de corregir la interferencia mediante una o ms de las siguientes medidas:
Orientar nuevamente o reubique la antena receptora. Aumentar la separacin entre el equipo y el receptor. Conectar el equipo a una salida de un circuito diferente al receptor. Consultar a su proveedor o a un tcnico de radio y televisin. 1 IMPORTANTES INSTRUCCIONES DE SEGURIDAD Antes de usar este producto, asegurarse de leer todas las instrucciones cuidadosamente. Favor de observar que estas son precauciones generales y algunas pueden no ser aplicables al reproductor. Por ejemplo, este producto puede no tener la capacidad para ser conectado a una antena exterior. 1. Leer las instrucciones Deben leerse todas las instrucciones de operacin y de seguridad antes de operar este producto. 2. Conservar las instrucciones Deben conservarse las instrucciones de operacin y seguridad para futuras referencias. 3. Poner atencin a las advertencias Todas las advertencias en el producto y las instrucciones de operacin y seguridad deben de respetarse. 4. Seguir las instrucciones Deben seguirse todas las instrucciones de uso y operacin. 5. Agua y humedad No usar este producto cerca del agua, por ejemplo cerca de una baera, lavabo, fregadero de cocina o de lavar, stanos hmedos o cerca de una piscina. 6. Limpieza Desconectar el cordn de alimentacin del tomacorriente antes de darle mantenimiento o limpieza al reproductor. Limpiar con una tela, suave, limpia y seca, No usar limpiadores lquidos o en aerosol. 7. Ventilacin Las ranuras y aberturas en la parte posterior y posterior del gabinete son provistas para la ventilacin y asegurar la buena operacin del producto y protegerlo del sobrecalentamiento. No deben bloquearse o taparse estas aberturas, colocando el producto sobre una cama, sof alfombra u otra superficie similar. El producto no debe colocarse cerca o sobre un radiador o fuentes de calor. Este producto no debe colocarse en un librero o estante que impida el flujo del aire a travs de las ranuras de ventilacin. 8. Calor El producto debe colocarse lejos de fuentes de calor como radiadores, registros de calor, estufas u otros productos que producen calor (incluso amplificadores). 9. Terminal de tierra y polarizacin No eliminar la caracterstica de seguridad de una clavija polarizada o clavija con terminal a tierra, esta es una medida de seguridad. Una clavija polarizada cuanta con dos terminales con una terminal ms ancha que la otra. Una clavija con terminal a tierra cuenta con dos terminales con una tercera terminal con conexin a tierra. Si la clavija no entra completamente la clavija en el tomacorriente, intentar meterla de nuevo volteando la clavija; si tampoco la clavija entra completamente consultar a un electricista o personal calificado para reemplazar el tomacorriente obsoleto. 10. Proteccin del cordn de alimentacin El cordn de alimentacin debe colocarse de forma tal que no exista probabilidad de pisarlo o apretarlo sobre los lugares donde ser colocado o contra el producto mismo. Poner atencin particular en el cordn, la clavija, el tomacorriente y en los puntos en donde estos salen del producto. 11. Accesorios Usar solo accesorios/refacciones recomendados por el fabricante. 12. Manejo y desplazamiento No colocar este producto en un carrito, plataforma, repisa o mesa inestables, el producto puede caerse generando serias lesiones y daos a las personas y/o al producto. Usar este producto solo con el carrito, plataforma, repisa o mesa recomendado por el fabricante o vendido con el producto. La combinacin del producto y de un carrito debe moverse con cuidado. Las paradas repentinas, fuerza excesiva y las superficies desniveladas pueden generar que el producto y el carrito se vuelquen. 13. Tormentas elctricas o periodos sin uso Desconectar este producto del tomacorriente durante tormentas elctricas o cuando va ser usado por un periodo largo de tiempo para protegerlo. Tambin desconectar la antena exterior o el sistema de cable. Esto protege al producto de daos debido a los rayos o sobre lneas de poder. 14. Referir todo Servicio Referir todo servicio a un centro de servicio autorizado o con personal calificado. El servicio es requerido cuando el producto ha sido daado de alguna manera, como el cordn de alimentacin o clavija daada, ha sido derramado lquido o han cado objetos en el interior del producto, el producto ha sido expuesto a la lluvia o humedad, el producto no opera normalmente o se ha dejado caer. 15. Fuentes de alimentacin Este producto debe ser operado solo con los tipos de fuentes de alimentacin indicados en la etiqueta de marcado, si no est seguro del tipo de la fuente de poder de su casa, consultar con su proveedor o con la compaa de electricidad local. Para producto diseados para operar con bateras u otras fuentes, referirse al manual de operacin. 16. Lneas de poder No debe de colocarse un sistema de antena exterior cerca de las lneas elctricas areas, luces o circuitos elctricos, o donde pueda caer sobre dichas lneas elctricas o circuitos. Al instalar un sistema de antena exterior, tener mucho cuidado de no tocar las lneas o circuitos elctricos, el contacto con ellos puede resultar fatal. 2 IMPORTANTES INSTRUCCIONES DE SEGURIDAD 17. Sobrecarga No sobrecargar los tomacorrientes, cordones de extensin y los receptculos ya que pueden generar riesgo de fuego o choque elctrico. 18. Entrada de objetos y lquidos No introducir objetos de cualquier tipo dentro de este producto a travs de las ranuras o aberturas, estos pueden llegar a tocar puntos de voltaje peligroso o salidas que pueden resultar en riesgo de fuego o choque elctrico. No derramar o rociar cualquier tipo de lquido sobre las ranuras de ventilacin del producto. 19. Antena exterior Si una antena exterior es conectada en el producto, asegurar de que el sistema de antena es puesto a tierra para proveer proteccin contra sobrevoltaje y cargas de corriente esttica acumulada. La seccin 810 del NEC
(National Electrical Code), ANSI/NFPA 70, Provee informacin respecto a la apropiada puesta a tierra del poste y la estructura de soporte, cables principales, productos de descarga de la antena, tipos de conductores a tierra, localizacin de los puntos de descarga de la tierra, conexin a tierra de los electrodos y los requisitos de los electrodos de conexin a tierra (ver figura) EJEMPLO DE CONEXIN A TIERRA DE UNA ANTENA EXTERIOR 20. Servicio No intentar dar servicio usted mismo a este producto, abriendo o removiendo las cubiertas, puede exponerse a voltajes peligrosos u otros riesgos. 21. Reemplazo de partes Cuando es necesario el reemplazo de partes, asegurarse que el servicio tcnico use partes especificadas por el fabricante o que tengan las mismas caractersticas que las partes originales. El reemplazo de partes no autorizadas puede resultar en fuego, choque elctrico u otros riesgos. 22. Verificar las medidas de seguridad Una vez que se ha completado cualquier tipo de servicio o reparacin a este producto, solicitar al tcnico de servicio que realice las pruebas de seguridad para poder determinara que el producto est en condiciones apropiadas de operacin. 23. Colocacin en la pared o techo El producto debe de colocarse en la pared o techo de acuerdo a como lo especifica el fabricante. 24. Daos que requieren servicio Desconectar el producto del tomacorriente de pared y acudir a un centro de servicio autorizado o con personal calificado bajo las siguientes condiciones a) Cuando la clavija o el cordn de alimentacin estn daados. b) Cuando ha sido derramado liquido o han cado objetos en el interior del producto. c) Si el producto ha sido expuesto a la lluvia o agua. d) Si el producto no opera adecuadamente siguiendo las instrucciones de operacin. Ajustar solo los controles que son indicados en este manual de operacin. El ajuste de otros controles puede ocasionar daos y a menudo se requiere de trabajo excesivo del servicio tcnico para restablecer la operacin normal del producto. e) Si el producto se ha cado o golpeado o si la cubierta est daada. Si el producto exhibe cambios en su funcionamiento normal. f) Todo lo anterior indica la necesidad de darle servicio al producto. 25. Instalacin del sistema de cable CATV Este recordatorio se proporciona para llamar la atencin respecto al artculo 820-40 del NEC de la instalacin del sistema de cable que proporciona las pautas para la adecuada conexin a tierra y, en particular, en los puntos especficos en el que cable a tierra debe ser conectado al sistema de tierra del edificio, tan cerca del punto de entrada del cable como sea prctico. 3 INSTALACION 1. Colocando la barra de sonido sobre una tabla Al colocar la barra de sonido sobre un centro de entretenimiento, librero o cualquier tipo de espacio cerrado, asegurarse de dejar un espacio libre alrededor de la barra de sonido de 5-7.5 cm mnimo para permitir una adecuada ventilacin. Si la barra de sonido es colocada en un espacio apretado sin ventilacin adecuada, esto puede generar sobrecalentamiento en la barra de sonido lo que puede producir un potencial riesgo de calor. 5-7.5CM PARED 5-7.5CM 2. Montando la barra de sonido sobre la pared Recomendamos tener esta barra de sonido profesional montada. Usando los accesorios de montaje incluidos, montar la barra de sonido sobre la pared. Distancia entre los dos soportes de fijacin 4 INSTALACION 2.1 Montando la barra de sonido sobre una pared de madera Usar Los dos tornillos para montaje incluidos 1. Marcar los dos puntos para colocar los tornillos de montaje con una separacin de 68.91 cm (27.13 pulgadas). Insertar los 2 tornillos directamente sobre los puntos marcados en la pared, dejando fuera las cabezas de los tornillos de 7-8 mm de la pared. Asegurase que los tornillos estn firmes y estables, entonces insertar las ranuras de montaje localizadas en la parte posterior de la barra de sonido sobre las cabezas de los tornillos. Asegurase que la barra quede montada firmemente. 2.2 Montando sobre una pared seca Usar Los dos tornillos para montaje incluidos Los dos taquetes de plstico incluidos 1. Marcar los dos puntos para colocar los tornillos de montaje con una separacin de 68.91 cm (27.13 pulgadas). Usar un taladro con una broca de 55 mm (7/32 pulgada) para realizar las dos perforaciones sobre los puntos marcados. Insertar los taquetes de plstico sobre las perforaciones realizadas. En caso de ser necesario, golpear los taquetes con un martillo suavemente para introducirlos. Insertar los 2 tornillos directamente sobre los taquetes insertados en la pared, dejando fuera las cabezas de los tornillos de 7-8 mm de la pared. Asegurase que los tornillos estn firmes y estables, entonces insertar las ranuras de montaje localizadas en la parte posterior de la barra de sonido sobre las cabezas de los tornillos. Asegurase que la barra quede montada firmemente. 2. 3. 2. 3. 4. 5. 5 DESCRIPCION DE PARTES - UNIDAD PRINCIPAL VISTA FRONTAL VISTA POSTERIOR A Indicador de fuente DC IN DC 12V,1.0A OPTICAL IN AUX 1 PANEL DE CONTROL Conector de entrada ptica Conector de entrada auxiliar 1 Conector de entrada de Vcc Botn para aumentar volumen Botn de Poder / Espera Botn para disminuir volumen Conector de entrada auxiliar 2 Botn de fuente R L 6 1 2 3 4 5 6 7 8 DESCRIPCION DE PARTES CONTROL REMOTO 9 10 11 12 13 1. 2. 3. 4. 5. 6. 7. 8. BOTN DE FUENTE SOURCE BOTN DE PODER/ESPERA BOTN PARA DISMINUIR VOLUMEN VOL-
BOTN PARA DISMINUIR SONIDOS GRAVES BASS-
BOTN PARA DISMINUIR SONIDOS AGUDOS TREBLE-
BOTN DE ECUALIZADOR EQ BOTN DE ANTERIOR BOTN DE REPRODUCIR /
PAUSAR BOTN DE SILENCIO MUTE 9. 10. BOTN PARA AUMENTAR VOLUMEN VOL+
11. BOTN PARA AUMENTAR SONIDOS GRAVES BASS+
12. BOTN PARA AUMENTAR SONIDOS AGUDOS TREBLE+
13. BOTN DE SIGUIENTE 7 INSTALACION DE LA BATERIA Antes de usar el control remoto por primera vez remover el protector de plstico como se observa en la figura 1. Reemplazo de la batera en el control remoto Presionar hacia la derecha sobre el seguro de la bandeja de la batera y jalar la bandeja hacia fuera (ver figura 2). Remover la batera gastada e instalar una batera nueva de litio (CR2025) en la bandeja, verificando que el lado positivo de la batera quede hacia arriba (ver figura 3). Introducir la bandeja en el compartimiento hasta escuchar un clic (ver figura 3). PRECACUCIONES SOBRE LAS BATERIAS Seguir las precauciones siguientes al usar una batera en el control remoto. Usar solo el tamao y tipo de batera especificada. Asegurase de seguir la correcta polaridad al reemplazar la batera. Una polaridad invertida puede daar el control remoto. No mezclar batera de diferente tipo, por ejemplo alcalinas con zinc-
carbn. No mezclar bateras nuevas con usadas. Si la batera en el control remoto est agotada o si el control remoto no va ser usado por un periodo largo de tiempo, remover la batera para prevenir daos o lesiones por posible fuga de acido de la batera. Siempre seguir las instrucciones y recomendaciones del fabricante de las bateras. No intentar cargar bateras que no estn diseadas para recargarse, estas pueden sobrecalentarse y explotar. No exponer las bateras a calor excesivo, por ejemplo bajo los rayos directos del sol, fuego o similares. Limpiar los contactos de la batera as como los del dispositivo para una adecuada conexin. 8 FUENTE DE ALIMENTACION Para encender la barra de sonido Conectar la salida del adaptador ca/cc incluido al conector de entrada de Vcc de la barra de sonido, entonces conectar el adaptador ca/cc al tomacorriente. El indicador de poder se enciende en color rojo. Presionar sonido. en la unidad o control remoto para encender la barra de Para apagar la barra de sonido Presionar para apagar la barra de sonido. en el control remoto o presionar y sostener en la unidad NOTA:
Si la barra de sonido no va ser usada por un periodo largo de tiempo, desconectar el adaptador ca/cc del tomacorriente y de la barra de sonido. FUENTE DE ENTRADA AUXILIAR 1 La fuente de entrada auxiliar 1 puede ser TV / DVD / VCR Conexin de la fuente de entrada auxiliar 1 1. Usando un cable de Audio/Video conectar las salidas de audio (Conector blanco: Canal izquierdo, Conector rojo: Canal derecho) de la fuente de audio externa (por ejemplo, una TV) a los conectores de entrada auxiliar 1 localizados en la parte posterior de la barra de sonido. Encender la barra de sonido. Presionar SOURCE en la barra de sonido hasta que el indicador cambia a color verde. Encender la fuente de audio externa e iniciar la reproduccin (por ejemplo, una TV). 2. NOTA:
Si no hay salida de audio en la barra de sonido o si el sonido es demasiado bajo, intentar aumentar el volumen de la fuente de audio. Conectores de salida de audio TV /
DVD / DVR /
VCR A los conectores de entrada Auxiliar 1 de la barra de sonido Durante la reproduccin Presionar MUTE para desactivar la salida de audio (silencio), presionar MUTE nuevamente para volver a activar la salida de audio. Presionar VOL+/- para ajustar el volumen al nivel deseado. Presionar BASS+/- para ajustar el nivel de los sonidos graves. Presionar TREBLE +/- para ajustar el nivel de los sonidos agudos. Presionar EQ para seleccionar el modo de ecualizacin preestablecido de Pop, Jazz, Clsica y Rock. 9 FUENTE DE ENTRADA AUXILIAR 2 La fuente de entrada auxiliar 2 puede ser Reproductor de audio personal. Computadora de escritorio o porttil. Conexin de la fuente de entrada auxiliar 2 1. Usando un cable de lnea de 3.5 mm (incluido) conectar la salida de audio para los audfonos de la fuente de audio externa (por ejemplo, un Ipod) al conector de entrada auxiliar 2 localizado en la parte posterior de la barra de sonido. Encender la barra de sonido. Presionar SOURCE en la barra de sonido hasta que el indicador cambia a color naranja. Encender la fuente de audio externa e iniciar la reproduccin (por ejemplo un Ipod). 2. NOTA:
Si no hay salida de audio en la barra de sonido o si el sonido es demasiado bajo, intentar aumentar el volumen de la fuente de audio externa. Al conector de entrada Auxiliar 2 de la barra de sonido Al conector salida de audio de 3.5 mm de la fuente de audio externa (Tableta, Computadora, Telfono celular, MP3, etc.) Cable de lnea de 3.5 mm para entrada auxiliar 2 (incluido) Durante la reproduccin Presionar MUTE para desactivar la salida de audio (silencio), presionar MUTE nuevamente para volver a activar la salida de audio. Presionar VOL+/- para ajustar el volumen al nivel deseado. Presionar BASS+/- para ajustar el nivel de los sonidos graves. Presionar TREBLE +/- para ajustar el nivel de los sonidos agudos. Presionar EQ para seleccionar el modo de ecualizacin preestablecido de Pop, Jazz, Clsica y Rock. 10 FUENTE DE ENTRADA OPTICA Conexin Hacer las conexiones conforme a la figura de abajo. Encender la barra de sonido. Presionar SOURCE en la barra de sonido hasta que el indicador cambia a color morado. NOTA:
No todos los sistemas de entretenimiento son ajustados de la misma forma, el diagrama de abajo es solo un ejemplo de cmo realizar las conexiones. La conexin ptica solo soporta el formato PCM Salida ptica de una TV
/ DVD / etc. (Referida como salida digital en algunos dispositivos) Conector de entrada ptica localizado en la parte posterior de la barra de sonido Durante la reproduccin Presionar MUTE para desactivar la salida de audio (silencio), presionar MUTE nuevamente para volver a activar la salida de audio. Presionar VOL+/- para ajustar el volumen al nivel deseado. Presionar BASS+/- para ajustar el nivel de los sonidos graves. Presionar TREBLE +/- para ajustar el nivel de los sonidos agudos. Presionar EQ para seleccionar el modo de ecualizacin preestablecido de Pop, Jazz, Clsica y Rock. Cable ptico (no incluido) DC IN DC 12V,1.0A 11 FUENTE BLUETOOTH Sincronizando 1. Presionar SOURCE en la barra de sonido hasta que el indicador cambia a color azul. Habilitar la funcin Bluetooth de la fuente de audio externa. Ajustar la fuente de audio externa para buscar otros dispositivos Bluetooth
(referirse al manual de operacin del dispositivo de audio externo si necesita ayuda con estos pasos). En la lista de dispositivos Bluetooth encontrados, seleccionar la barra de sonido NAXA NHS-2007. Si el dispositivo requiere una contrasea, ingresar 0000. Despus de que la sincronizacin es satisfactoria, el dispositivo de audio externo est habilitado para transmitir audio de forma inalmbrica hacia la barra de sonido. Algunos dispositivos permiten controlar la reproduccin desde la barra de sonido, de otra forma, controlar la reproduccin desde el dispositivo de audio externo. Si el intento de sincronizacin falla, la barra de sonido puede estar fuera de tiempo. Intentar sincronizar los dispositivos nuevamente. 2. 3. 4. 5. NOTA: Slo un dispositivo se puede sincronizar con la barra de sonido a la vez. Desactivar la funcin Bluetooth en otros dispositivos para evitar interferencias. La barra de sonido intentar volver a conectarse automticamente con el ltimo dispositivo sincronizado cuando se coloca en el modo Bluetooth. Si se pierde la conexin Bluetooth debido a factores externos, o no se reconecta automticamente, se debe volver a sincronizar los dispositivos nuevamente. Desactivar NAXA NHS-2007 de la lista de dispositivos Bluetooth en su dispositivo de audio externo antes de sincronizar nuevamente. 2. Ajuste de Toque NFC Si tiene un dispositivo que cuenta con la funcin NFC y Bluetooth, puede sincronizar el dispositivo a la barra de sonido con un simple toque. As de fcil!
1. Colocar la barra de sonido en el modo de Bluetooth (presionar SOURCE hasta que el indicador cambia a color azul). Localizar el sensor NFC en la parte superior derecha de la barra de sonido. Tocar con la parte posterior del dispositivo el sensor NFC de la barra de sonido. La barra de sonido emite un sonido al detectar el dispositivo. El dispositivo preguntara por permiso para sincronizar la barra de sonido, seleccionar Si. La barra de sonido emite otro sonido cuando la sincronizacin se completa. 3. 4. NOTA: Antes de intentar usar el NFC para ajustar la conexin Bluetooth, asegurase que las funciones de NFC y Bluetooth estn habilitadas en el dispositivo. Para dispositivos con sistema operativo Android, puede encontrar la opcin NFC en la pantalla del men de Ajustes Conexiones inalmbricas y Redes Mas Durante la reproduccin nuevamente para Presionar para pausar la reproduccin, presionar volver a la reproduccin desde el punto donde se pauso. Presionar o para saltar a la pista anterior o siguiente respectivamente. Presionar MUTE para desactivar la salida de audio (silencio), presionar MUTE nuevamente para volver a activar la salida de audio. Presionar VOL+/- para ajustar el volumen al nivel deseado. Presionar BASS+/- para ajustar el nivel de los sonidos graves. Presionar TREBLE +/- para ajustar el nivel de los sonidos agudos. Presionar EQ para seleccionar el modo de ecualizacin preestablecido de Pop, Jazz, Clsica y Rock. 12 GUIA RAPIDA PARA LA SOLUCION DE PROBLEMAS Antes de llevar la barra de sonido al centro de servicio para su anlisis, favor de seguir la gua rpida para la solucin de problemas. Si el problema persiste acudir al centro de servicio autorizado. PROBLEMA No enciende No hay salida de audio El control remoto no opera Los modos de entrada Auxiliar 1 y 2 no operan POSIBLE CAUSA El adaptador ca/cc no est conectado La barra de sonido esta en modo de espera Volumen ajustado al mnimo El dispositivo de audio no est en modo de reproduccin La salida de audio del dispositivo es dbil Las bateras en el control remoto estn agotadas Fuente seleccionada de forma equivocada No hay respuesta de la fuente Bluetooth Fuente seleccionada de forma equivocada tse dadinu aL conectada a otro dispositivo Bluetooth odatcenoc ovitisopsid lE est desactivado ESPECIFICACIONES POSIBLE SOLUCION en la barra Conectar el adaptador ca/cc Presionar o control remoto para encenderla Incrementar el nivel de volumen Reproducir la msica o pelcula en el dispositivo conectado Incrementar el nivel de volumen Reemplazar la bateras por unas nuevas Presionar SOURCE hasta que el indicador cambia a Verde (Auxiliar 1) o Naranja (Auxilia 2) Presionar SOURCE hasta que el indicador cambia a Azul Desconectar el otro dispositivo e intentarlo nuevamente Activar el dispositivo conectado e iniciar la reproduccin Salida de audio Fuente de alimentacin del control remoto Adaptador ca/cc:
Entrada:
Salida:
10 W 3 Vcc (1 batera CR2025) 110-240 Vca 50/60 Hz 12 Vcc 1.0 A NOTA: LAS ESPECIFICACIONES Y EL DISEO DE ESTE PRODUCTO, ESTN SUJETOS A CAMBIOS SIN PREVIO AVISO PARA MEJORAS DE LOS MISMOS. ACCESORIOS Manual de operacin Control remoto con batera de 3 Vcc CR2025 Cable de audio estereofnico de 3.5 mm Cable de lnea RCA Adaptador ca/cc 2 tornillos 2 taquetes de plstico 13 SOPORTE Si tiene problemas con la operacin de la unidad, favor de consultar las instrucciones en este manual, asi como las ultimas noticias, recomendaciones y documentacin que puede encontrar en nuestra pagina web www.naxa.com. Si necesita asistencia futura, favor de contactar al centro de servicio autorizado 2014 NAXA ELECTRONICS CORPORATION. TODOS LOS DERECHOS RESERVADOS. Naxa es una marca registrada de Naxa Electronics, Inc. Bluetooth es una marca registrada de Bluetooth SIG, Inc. Android es una marca registrada de Google Inc. Todas las dems marcas y logotipos son propiedad de sus respectivos dueos a menos que se indique otra cosa.
1 | Agent Authorization Rev 1.0 | Cover Letter(s) | 63.30 KiB | June 10 2022 |
Shenzhen Junlan Electronic Ltd Agent Authorization Company: Shenzhen Junlan Electronic Ltd Address: No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Product Name: 42INCH Slim Sound Bar System with Bluetooth Model Number(s): NHS-2007, SB-1528 Product Description: 42INCH Slim Sound Bar System with Bluetooth We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:
Name:
peng xiao Title:
safety engineer Company: Shenzhen Junlan Electronic Ltd Date: 2022-06-02
1 | FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 95.87 KiB | June 10 2022 |
Shenzhen Junlan Electronic Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Long Term Confidentiality FCC ID: OKUSB1528 Date:2022-06-02 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:
Name: peng xiao Title: safety engineer
1 | Model Statement | Cover Letter(s) | 64.28 KiB | June 10 2022 |
Shenzhen Junlan Electronic Ltd No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Statement Product: 42INCH Slim Sound Bar System with Bluetooth Model: NHS-2007 Additional Model: SB-1528 Trademark: NAXA We hereby state that All models above are identical components, and just model names are different for the marketing requirement. in interior structure, electrical circuits and Your assistance on this matter is highly appreciated. Yours sincerely, Signature:
Date: 2022/06/02 Name: peng xiao Company Name : Shenzhen Junlan Electronic Ltd Address: No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Tel / Fax: 0755-27309169/0755-27309497 E-Mail: xp@jump-lan.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-06-10 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2022-06-10
|
||||
1 | Applicant's complete, legal business name |
Shenzhen Junlan Electronic Ltd
|
||||
1 | FCC Registration Number (FRN) |
0021880893
|
||||
1 | Physical Address |
No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District
|
||||
1 |
No.277 PingKui Road, Shijing Community
|
|||||
1 |
Shenzhen, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
OKU
|
||||
1 | Equipment Product Code |
SB1528
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
p****** x******
|
||||
1 | Title |
safety engineer
|
||||
1 | Telephone Number |
0755-********
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
x******@jump-lan.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Shenzhen Junlan Electronic Ltd
|
||||
1 | Physical Address |
China
|
||||
1 |
x******@jump-lan.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 42INCH Slim Sound Bar System with Bluetooth | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SHENZHEN TONGCE TESTING LAB
|
||||
1 | Name |
B**** Z******
|
||||
1 | Telephone Number |
+8675********
|
||||
1 |
b******@tct-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0025000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC