ALEXA PORTABLE SPEAKER VOICE ACTIVATED WATER PROOF OWNER'S MANUAL PLEASE READ BEFORE OPERATING THIS EQUIPMENT. MODEL: MSH318 Size: 148.5(W) x 210(H)mm (A5) IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT S EMOVE COVER (OR BACK). NO USER-SERVICEABLE ART R I NSIDE UALIFIED ERVICE PERSONNEL. EFER SERVICING T O Q
. R P S The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. FCC WARNING:
To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user`s authority to operate this device. t d i i nstalled and use FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if no n accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment FCC ID:OKUCAW45320 2 IMPORTANT SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings. All warnings on the product and in the operating instructions should be adhered to. 4) Follow all instructions. All operating and use instructions should be followed. 5) Do not use this apparatus near water. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool. 6) Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11)Only use attachments/accessories specified by the manufacturer. 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. An appliance and cart combination should be moved with care. Quick stop, excessive force and uneven surfaces may cause the appliance and cart combination to overturn. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped. 15) Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions. 16) Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 3 IMPORTANT SAFETY INSTRUCTIONS 17) Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18) Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product. 19) Outdoor antenna grounding If an outside antenna is connected to the product, be sure the antenna system is grounded so as to Provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code ANSI/NFPA 70 provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna-discharge product, connection to grounding electrodes and requirements for the grounding electrodes.
)Damage requiring service 20)Service Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21)Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. 22)Safety check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 3 2 Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions. a) When the power-supply cord or plug is damaged. b) If liquid has been spilled or objects have fallen into the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will require extensive work by a qualified technician to restore the product to its normal operation. e) If the product has been dropped or the cabinet has been damaged. f) When the product exhibits a distinct change in performance-this indicates a need for service. 2 )Note to CATV system installer 4 This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTE: Refer all servicing to qualified service personnel. Servicing is required when the unit has been damage n any way such as the following: the power-supply cord or plug has been damaged, liquid has bee i pilled into unit, the unit has been exposed to rain or moisture, the unit has been droppe s n ot operate normally. d o n d r the unit doe s 4 Location of Controls TOP VIEW:
1 2 3 4 REAR VIEW:
SOURCE WPS SLEEP FM SCAN SNOOZE DIMMER VOLUME 15 14 4 5 6 7 8 9 10 11 12 13 DC IN DC 5V, 2A 1A charge only ANT Line in 16 17 18 19 5 Location of Controls FRONT VIEW:
20 BOTTOM VIEW:
21 1. LED Indicator Bar 2. SOURCE Button Press repeatedly to select the playback source 3. Microphone Button Press to active the Alexa Microphone 4.Built-in Microphones 6 Location of Controls 5.SLEEP Button In power on mode, press repeatedly to activate and set the sleep timer. 6.FM SCAN Button In first time use (or relocated the Clock to a new location), press to search and store the available FM stations. 7. Microphone Off Button Press and hold to turn off the microphone press and hold again to turn it on.
,. 8.WPS
(WPS, Play/Pause) Button In Wifi connecting mode, press and hold to enter to the Wifi set up mode. In Wifi connected mode, press and hold to disconnect Wifi network. In audio playback mode, press to pause. Press again to resume to normal playback. 9.
(Power On/Off) Button Press and hold to turn on the Clock from standby mode, press and hold again to back to standby mode. 10.
(Previous) Button In Radio mode, press to play the previously stored Radio station. In music playback mode, press repeatedly to skip to previous tracks. 11.
(Next) Button In Radio mode, press to play the next stored Radio station. In music playback mode, press repeatedly to skip to next tracks. 12. SNOOZE Button When alarm goes off:
Press to activate the snooze function, the alarm will turn back on automatically nine (9) minutes later. This feature can be repeatedly until the Alarm is shut off. Or, press and hold approximately 1 second to shut off the Alarm. 13. DIMMER Button Press repeatedly to adjust the brightness level of the display as desired. 14. - (Volume Down) Button Press repeatedly to reduce the volume level as desired. 15. + (Volume Up) Button Press repeatedly to rise the volume level as desired. DC IN Jack USB Port 16. 17. To recharging the external USB Device. 18. Line in Jack FM 19. ANT ( Wire 20. Display 21. Button Cell Compartment Antenna) 7 Button Cell Installation (For Clock Back Up) ere is AC power failure, this electronic clock is designed to continue operating internally If th
(without showing the time on the Clock Display) with a CR2032 button cell (included). Install it
(or replace it when it is drained) as follows:
1. Loosen the screw on the Button Cell Compartment with a Philips screwdriver (not included) as Fig. 1 below. 2. Press the tab on the door then lift it off. 3. Install (or replace) th e button cell Button Cell Compartment. as Fig. 2 below according to the polarity diagram inside the 4. Close the door and tighten the screw on it as Fig. 3 shows below. Fig.1 Fig.2 Fig.3
........................ CR2032 LITHIUM BATTERY 3V
........................ BATTERY PRECAUTIONS:
Follow these Battery Precaution when using a battery in this device:
1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones. 4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.
(Follow battery manufacturers instructions.) 6. Do not dispose of battery in fire. Battery may explodes or leak. 7. Clean the battery contacts and also those of the device prior to battery installation. 8. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burn in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 8 WiFi Setup To synchronize the correct time to your Clock you must connect your device to the same Wifi network with the Note: All Devices must Magnavox Alexa app following the instructions below. connect to the same 2.4G Wi-Fi Network. Preparation:
1. Create and register an Amazon user account:
(If you already have an Amazon account, you can skip this step. But, please make sure that you set in the same time zone your clock is located.) Download the then install it following the on screen instructions from your mobile device. app from the Apps Store into your mobile device Amazon Alexa During installation, you should register the time zone's region your clock will display. Otherwise, the actual time shown on the clock may be incorrect.
<
MSH318 Edit name Alexa Devices GENERAL Do Not Disturb Off Device Location Device Time Zone Pacific Daylight Time(Los Angeleses) Follow-Up Mode Off Measurement Units Fahrenheit,Miles Registered To XXXX About Deregister
<
Device Time Zone United States Change TIME ZONES Alaska Daylight Time Anchorage Central Daylight Time Chicago Eastern Daylight Time New York
. Pacific Daylight Time Los Angeles 2. Download; install and register the app from the Google Play or Apple Apps Store into your mobile device following the on screen instructions from your mobile device. MAGNAVOX Alexa Player 9 Wifi Connection:
1. Make sure the time zone setting on your mobile device is same Otherwise, the time showing on the Clock may differ to your Amazon time. as your Amazon account. 2. Connect your mobile device to your 2.4G Wifi network. 3. 4. Connect the unit to AC power as below:
Connect the small plug from the AC/DC adaptor to the DC IN Jack on the rear of the Clock. Connect the AC/DC adaptor to wall outlet having AC 100-240V~, 50/60Hz. AC/DC Adapter To AC outlet DC IN DC 5V, 2A 1A charge only ANT Line in To the DC IN jack on the rear of the unit Press and hold the will appear on the display and blink. You will also hear an audible Power on; Wi-Fi mode. The Wifi icon Power Button until the display is illuminated. Time 12:00 will appear on the display and blink. prompt say 5. Wait approximately 30 seconds (Or press and hold the Button) until you hear an audible prompt say finish set up. Entering set up mode; follow the instruction on the app to WPS 10 6. Open the APP MAGNAVOX Alexa Player in your mobile device. Then it will start to scan and search the available devices automatically. touch the " " Button on the screen to continue. Read the on screen instructions and Add Device Searching for MAGNAVOX Wireless Hi-Fi System.. Please make sure your device is powered up. Your phone is connected to XXXX, please make sure your device is same network. connected to the Add Device Experiencing any problems? Give us your feedback>>
7. The following Fig.A will appear. Touch the Button on the screen. The devices list will V MSH318 on it. The follows Fig. B will appear. Touch the Connect appear. Touch the Speaker Button on the screen to continue. ADD DEVICE ADD DEVICE Please select your device Please select your device MSH315V
>
MSH318
>
SOURCE WPS SLEEP FM SCAN SNOOZE DIMMER VOLUME Connect Speaker Connect Speaker Fig. A Fig. B 11 8. The follows screen will appear. Touch the Button on it to enter to Wifi Settings setting menu.
<
SETUP Go to your Phone's Wi-Fi settings and select the Wi-Fi starting with MSH318_XXXX to connect. Wi-Fi MSH318_XXXX Then, come back to this App. Could not find MSH318_XXXX?
Settings 9. Find our Model number MSH318_XXX
(XXX is the identify number of the existing Clock) in the available Wifi devices list on your mobile device then touch it to enter. NOTE:
If the connection is failure and the follows screen appear. Press and hold the Button approximately 5 seconds to restart the setting procedures. WPS SETUP Press and hold the WPS button on your speaker for 5 seconds to put into setup mode. SOURCE WPS SLEEP FM SCAN SNOOZE DIMMER VOLUME Continue 10. Touch the RETURN Button on the mobile device's screen to return to previous setting page. Wait a few seconds, the Wifi network list will appear. Select and touch the button of your 2.4G Wifi network. Then touch the Continue Button to continue. Notes: The Wifi network you selected must same as the 2.4G network your mobile device using. Password of the network may need enter if set.
< Settings Wi-Fi Wi-Fi MSH318_XXXX CHOOSE A NETWORK... ABCDEF ABC-XXX Other... i i i SELECT NETWORK Choose the network you want the device to use. MAGNAVOX only supports 2.4G networks. XXXX ABC123 ABC-XXX 12345 Password Please enter Wi-Fi password Continue 12 11. Wait a few seconds, the follows screen will appear. Touch the "Next" Button on it to continue. NOTE:
If the connection is failure, the following screen will appear. Touch the Try Again Button on it to restart the settings follows the on screen instructions. CONNECTED CONNECT FAIL Current Wi-Fi strength of device:100%
Next 12. The follows screen will appear, touch the
>
Button on it to continue. NAME DEVICE
>
Custom... MSH318_XXXX Bathroom Bed Room Den Dining Room Family Room Foyer Garage Garden 1.Your Phone is connected to wireless network xxxxx_XXXX and your speaker is connected to XXXXX. Please go to your Phone's WiFi Settings and connect to XXXX. 2.Failed to setup your speaker. Please retry if you entered the password incorectly. Check help for alternate setup method for WiFi setup. Help Try Again Cancel Setup 13. The follows screen will appear, touch Button on
"Sign in with Amazon"
the it to continue. Your device includes acess to Alexa. Connect your Amazon account to access personalized features. Alexa allows you to use your voice to play music and get news, sports scores, weather and more-
all hands-free. All you have to do is ask Alexa. 13 S i g n i n w i t h A m a z o n C a n c e l 14. The follows screen will appear, sign in your Amazon account follows the on screen instructions. AMAZON LOGIN
<
Sign in Forgot password?
15. If you do not have an Amazon account, then Button on screen instructions. Create a new Amazon account touch to start registration and create a new Amazon account follows the
<
Create account AMAZON LOGIN Email (phone for mobile accounts) Amazon password Show password Keep me signed in. Details Name Your email address Create a password Show password Sign in Create your Amazon account New to Amazon?
Create a new Amazon account By create an account, you agree to the terms and conditions below. 17. The following screen will appear, select and set the region you are, then touch Next
<
Button to continue. AMAZON LOGIN Select your country or Region This way, Alexa will give you more accurate responses. 16. When sign in, the following screen appear, Button on it to continue. touch the Allow
<
AMAZON LOGIN MSH318 would like access to:
Alexa Voice Service Alexa processes and retains audio, interactions, and other data in the cloud to provide and improve our services. Alexa allows purchasing by default payment and shipping settings. You can require a speakable confirmation code, turn off voice purchaing, and see product and order details in your Alexa App or on alexa.amazon.com. Learn more. By tapping"Allow", you agree to Amazon's Conidtions of Use and All terms found here. voice using your Allow Cancel United States
<
Next 14 18. The following screen will appear, touch the button of the desired language. 19. The following screen will appear, touch the Next Button on it. Alexa is ready Here are some of the many things you can ask Alexa. Alexa, what's the weather?
Alexa, play my Flash Briefing. Alexa, what are some top-rated Indian restaurants?
Alexa, set a timer for 20 mins. Next You can change the language later in
"Amazon Alexa Settings". 20. The following screen will appear. Then you can turn off the Alexa Microphone following the on screen instructions or touch the Next Button to skip this setting then go to next step. 21. The following screen will appear, touch I got it the settings. Button to complete the
<
DEVICE LIST Bedroom You Belong with Me. Bedroom R L How to switch between solo and multi mode?
We value your privacy, so you can disable your microphone as shown in the image above. To learn more and acess additional features, download the Amazon Alexa App. Next I got it!
Pause All 22. Once the set up is finished, press and hold the Power off. standby mode. You will hear an audible prompt say Power Button to turn the Clock to 15 P l e a s e c h o o s e y o u r p r e f e r e d D e u t s c h l a n g u a g e f o r A l e x a
. E n g l i s h
(
U n i t e d S t a t e s
) E n g l i s h
(
U n i t e d K i n g d o m
) Operation Alexa:
1. 2. 3. After the Clock was connected to Wifi network and sign in to Amazon as Button approximately 1 instructed earlier. second to turn on the clock from standby mode. Icon display and you will hear an audibl will appear on the say Power on; Wi-Fi mode. Press and hold the e prompt Power Wait approximately 30 seconds until the clock is automatically connected to your Wi-fi network and Amazon, you will hear an audible Connected to your Wifi network. prompt say Say Alexa to the microphone or press the Indicator Bar will microphone then wait m Alexa reply fro for a illuminate. Ask your questions or instructions to the
. For example, You can ask:
Microphone Button, the
(Alexa) Who are you?
(Alexa) What's the time now?
(Alexa) What's the news today?
(Alexa) Play a song.
(Alexa) Stop (or Pause) the song. 4. When finished, press and hold the standby mode. You will hear an audibl Power e prompt Button to turn the unit to say Power off. ALARM:
Alarm set:
1. In Wifi connection mode, say Alexa to the microphone or press the Microphone ask Alexa to:
Button, the Indicator Bar will illuminate. Then,
(Alexa) Set an alarm. Alexa will reply: Alarm for what time?
(Alexa) Eight AM. Alexa will reply: Alarm set for eight AM. 2. When alarm is set and activated, the indicator alarm1 will appear on the display. 16 3. More than one alarm can be set, repeated the same procedures until all alarms are set. IMPORTANT:
When using the Alexa alarm clock (or timer), make sure the Clock is in power on mode and connected to the Wifi network and Amazon continually. Otherwise, the alarm will not function. Snooze:
When alarm goes off, press the SNOOZE Button, the Indicator Bar will illuminate and blink. The alarm will turn back on automatically nine (9) minutes later. This feature can be repeatedly until the Alarm is turned off. Shut off alarm:
When alarm goes off, press and hold the SNOOZE Button to shut off alarm. The indicator alarm1 will disappear on the display. Cancel alarm:
In Wifi connection mode, say Alexa to the microphone or press the Microphone Button, the Indicator Bar will illuminate. Then, ask Alexa to:
(Alexa) Cancel alarm. If more than one alarm time was set, cancel it following her instructions. will reply: XX alarm cancel. Alexa RADIO:
1. 2. 3. Press and hold the the clock from standby mode. Indicator you will hear an audibl e prompt Power Button approximately 1 second to turn on will appear on the display and say Power on; Wi-Fi mode. Press the Source Button repeatedly until the indicator radio appears on the display. In first time use (or relocated the Clock to a new location), search and store the available FM stations by pressing the FM SCAN Button. The Clock will automatically search and store all available FM radio stations then play the first stored FM station. 17 4. 5. 6. or
(Back or Forward) buttons Press the the desired stored radio station. Press the VOLUME +/- buttons to adjust volume level as desired. When finished, press and hold the standby mode. You will hear an audibl e prompt Power Button say Power off. to turn the unit to repeatedly to select and play Antennas:
The FM Wire Antenna on the rear of unit is for FM reception. If reception is weak, unwind it to full length and/or reassemble the other direction/location to improve reception. AUX/LINE IN:
Listen music from the external Audio Player such as MP3 Player, DiscmanETC:
1. 2. 3. 4. 5. 6. In power off mode, connect one end of the Audio Connection Cable (not included) to the AUX Out / Line Out / Phone Jack on the external Audio Player. Connect the other end of the cable to the Line in Jack on the rear of the Clock. In power on mode, press the Source Button repeatedly until the indicator You will also hear an audible prompt say line-in appear on the display. Auxiliary Mode . Play the music on the connected Player as usual. (Make sure the volume level of the connected Audio Player is turned to high level.) Press the VOLUME +/- buttons to adjust volume level as desired. When finished, press and hold the standby mode. You will hear an audible Power Button prompt say Power off. to turn the unit to MUSIC PLAYBACK:
Stream and play music through the Clock from Amazon:
1. 2. Press and hold the clock from standby mode. Icon hear an audible prompt Power Button approximately 1 second to turn on the will appear on the display and you will say Power on; Wi-Fi mode. Wait approximately 30 seconds until the clock is automatically connected to your Wi-fi network and Amazon, you will hear an audible Connected to your Wifi network. prompt say 18 Button, the illuminate. Say your instructions to the microphone then Microphone 3. 4. 5. Say Alexa to the microphone or press the Indicator Bar will wait the reply from her. You can say:
(Alexa) Play the song. Then select and play the music following Alexa instructions. You can also stream and play music through the Clock from mobile device on your Wifi network by using the MAGNAVOX Alexa Player app. your 1. 2. 3. Power Button approximately 1 second to turn on the will appear on the display and you will Press and hold the clock from standby mode. Icon hear an audible say Power on; Wi-Fi mode. Wait approximately 30 seconds until the clock is automatically connected to your Wi-fi network and Amazon, you will hear an audible Connected to your Wifi network. Open the MAGNAVOX Alexa Player in your mobile device. Play the music on your device or through other Music Store following the on screen instructions. prompt app say BUILT-IN USB CHARGER:
The Clock has a built-in USB Charger, connect the external USB Device to the USB Port on the rear of the Clock for recharging. Using PROPER USB charging cable
(not included) To charging port of the external device To USB Port on the rear of the Clock 1A charge only DIMMER
:
Press the DIMMER Button repeatedly to adjust the brightness level of the display as desired.
:
SLEEP TIMER SLEEP Press the on the display. Press the button repeatedly to set the sleep timer to 10 90 minutes as desired. To turn off the sleep timer before the time is up, press and hold the Button to activate the sleep function, sleep timer will appear Power Button to turn the Clock to standby mode. 19 Cleaning 1. To prevent fire or shock hazard, disconnect your unit from the AC wall outlet when cleaning. 2. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. 3. Mild soap and a damp cloth may be used. Troubleshooting Guide Check the following before requesting service:
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Cant power on The adapter is not plugged Plug the adapter properly No sound or sound weak Volume level in minimum position Raise the volume level by pressing the + Button on the top of Clock Volume level of paired/connected device is in low level a R ise the volume level of the connected device Volume level too high Sound distortion Volume level of the connected device too high Wi-Fi not functioning The Clock had NOT add in the Wi-Fi network and had NOT sign in Amazon account The Clock is in standby mode The Clock and the mobile devices is not in the same 2.4G Wi-Fi network FM weak reception Amazon Alexa not functioning The unit is not in the Amazon Alexa operation mode Reduce the volume level by pressing the - Button on the top of Clock Reduce the volume level of the connected device Add the Clock into the Wi-Fi network and sign in Amazon account as page 9-15 Press and hold the " " Button to turn on the Clock from standby mode Set the Clock and the mobile device in the same 2.4G Wi-Fi network Unwind the FM Wire Antenna to its full length and/or reassemble the other direction/location to improve reception Power on the unit and enter to Amazon Alexa operate mode as page 16 20 General Specifications Power Source:
Wifi Type:
Wi-Fi Operation Range:
FM Radio Coverage:
Clock Back Up:
USB Charger Output:
Accessories DC 5V, 2A, IEEE 802.11 b/g/n up to 96 feet in open area 87.5-108.0 MHz 1 x CR2032 Button Cell DC 5V, 1A Max. 1 x Owner's Manual 1 x AC/DC Adaptor (Input: AC 100-240V~;50/60 Hz, 0.5A Max Output: DC 5V, 2A, ) SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE 21 LIMITED WARRANTY Craig Electronics warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 180 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashiers check or Money Order for $15 (to cover shipping and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please make sure that the cashier check or money order is redeemable through a U.S. bank. Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit cannot be repaired or replaced, a refund will be forwarded to you within four weeks of receipt of your unit. Please ship your unit to:
Craig Electronics Inc. 1160 NW 163 Drive Miami, Fl 33269 This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment. Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owners Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA. This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter. Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you. This product has been manufactured by and is sold under the responsibility of Craig Electronics Inc, and Craig Electronics Inc is the warrantor in relation to this product. MAGNAVOX and SMART. VERY SMART are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. To Obtain Service on your Product email: magnavox@craigelectronics.com Printed in China MSH318_WC_E0CL1_B0US