FCC ID: 2AJK8-IR10 Human infrared

V1.1 Instructions Specification Rated voltage:

AC 100-240V Rated current:10A(Resistive Material:ABS+PC Humidity:S80%

50/60Hz load) Wiring diagram of this set switch and transmitter 1.The receiver have been paired. according can control to the wiring the receiver. After the wires are connected the transmitter diagram, 3.Put the batteries(2AA1LR06) into the press and hold the transmitter transmitter, reset button until the receiver LED is solid on, which means that the pairing and you can control is successful switch indicator it 5 Sec Flash 2.lf you want to pair with a new transmitter. long press the receiver seconds until the receiver blink switch indicator reset button for five is not equipped with Note: The transmitter batteries. One receiver with 2 transmitters. is paired with the receiver transmitter will be covered

(WK2RF) can be paired When the third transmitter

(WK2RF), the first back left middle back Installation Settings 1. Installation Wall or corner, 1.8m-2.4m position:

above the ground instructions 2. Installation 3. Working temperature:

and precautions 20~35C Do not install in an unstable place Don't face the heat or cold source Do not install against the metal wall Avoid direct sunlight Please avoid high-voltage line On state time 30s On state time 60s

@ On state time 300s On state time 360s Sensitivity:high Sensitivity:low to use it on the bed to use this product Warning 1 : It is forbidden 2: It is forbidden and high temperature 3: The maximum power of the receiver

(WK2RF) is 1 OA, excessive prohibited conditions. power usage is in humid FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction FCC ID: 2AJK8-IR10

Shenzhen Lingan Intelligent Technology Co.,Ltd Agent Authorization Company: Shenzhen Lingan Intelligent Technology Co.,Ltd Address: 6/F, 10 Bldg,Nangang 2nd Industrial Park, Songbai Road No.1026, Xili, Nanshan District, Shenzhen, China. Product Name: Human infrared Model Number(s): IR10 Product Description: Human infrared We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

mingchao liu Title:

manager Date: 2022.03.18 Company: Shenzhen Lingan Intelligent Technology Co.,Ltd

Shenzhen Lingan Intelligent Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AJK8-IR10 Date: 2022/03/18 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: mingchao liu Title: manager Email: liumingchao@lingansmart.com

Shenzhen Lingan Intelligent Technology Co.,Ltd Date: Mar 18, 2022 FCC ID: 2AJK8-IR10 Model Number: IR10 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Shenzhen Lingan Intelligent Technology Co.,Ltd declare that this EUT

(FCC ID: 2AJK8-IR10) will conduct FCC compliance testing, the SDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.( ShenZhen Lab.). 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Baoan District, Shenzhen 518126 P.R. China) Please contact me if you have any question. Sincerely,

(Signed) Name / Title:mingchao liu/ manager Company: Shenzhen Lingan Intelligent Technology Co.,Ltd Address: 6/F, 10 Bldg,Nangang 2nd Industrial Park, Songbai Road No.1026, Xili, Nanshan District, Shenzhen, China.