Xxxxxxxx Anti-Tamper Asset Tag Datasheet Model: MBT01 CONTENTS 1. Brief Introduction................................................1 2. Key Features........................................................ 1 3. Market Applications............................................ 1 Application Scenarios..............................................1 4. Device Specifications...........................................2 5. Product Appearance............................................3 6. Installations......................................................... 3 7. Cautions.............................................................. 4 8. FCC Requirement................................................ 4 9. Quality Assurance............................................... 4 10. Declaration........................................................ 5 11. Contact Information..........................................5 1. Brief Introduction MBT01 with a anti-tamper button is a Bluetooth location tag dedicated to asset positioning. If the tag is forcibly removed, it will broadcast a specific signal to the server and administrator that the asset tag has been removed to ensure the safety of the asset. The broadcast distance can reach up to 656ft(200m) on default setting, which can track the assets of warehouse to ensure fast-searching and status of assets. Likewise, the device can be deployed on some sickbed or equipment in hospital due to its portable design for better medical resources application and management. 2. Key Features BLE 5.0 & nRF52 Series Anti-Tamper Alarm Detection Up to 3 years Service Lifetime Up to 656ft(200m) Broadcasting Distance IP65 Waterproof & Dustproof Portable & Fashionable Design 3. Market Applications Smart Warehouse Smart Logistic Smart Office Application Scenarios Asset Tracking & Resources Allocation technology, through MBT01 Based on relevant installed on important assets, users can achieve indoor positioning so that save amounts of time on searching. Also, the admins can track the assets security status with the anti-tamper button of the device. Item Transportation&Anti-lost Tracking Based on users technology development on the they can track items status by tracking system, end-to-end during the transportation. Besides, through MBT01 installed on different delivery sites, users can take solutions to transport delay or anti-lost by tracking the items status in real-time. 1 4. Device Specifications Basic Parameters Item Material Color DimensionsL*W*H Protection Value ABS White 42.5*23.5*5.3mm IP65 Remarks Null Null Null Null Battery CR Button Series 230 mAh Battery Lifetime Chip Model Configuration App 3 years nRF52 Series BeaconSET +
Sensors OTA NFC LED Operating Temperature No No No Yes
-20~60 Default Setting: 0dBm, 5000ms Null Null Null Null Null Blue Light Null Broadcast Parameters(BeaconPlus Firmware) Broadcast Frame Status Tamper Normal Broadcast Anti-tamper Alarm Broadcast Item Transmit Power Broadcast Interval Transmit Power Broadcast Interval Default Setting 0dBm 5000ms 0dBm 1000ms Broadcast Duration 30000ms Remark: Currently MBT01 only opens the Tamper channel, which can normally show two different broadcast status: Normal Broadcast or Anti-tamper Alarm Broadcast, and the battery level information. 2 5. Product Appearance 6. Installations Methods: Double-side adhesive tape Details:
Double-side adhesive notes:
Recommended Installation Environment: The material surface should be Aluminum, galvanized steel, enamel steel, stainless steel, ceramic, glass/epoxy resin, acrylic, PBT, ABS, PC, hard PVC, etc. Requirements: No dust on the material surface and clean it before installation. Before pasting, increasing the viscosity with a hairdryer, or sticking it over half-hours at a reasonable temperature and then pressing for seconds and repeat for better stability. 3 7. Cautions Press button for 3 times sequentially until the blue light shines to turn it on. Turned-off by the shut-down button on the BeaconSET+ APP until the blue light shines times. Please do not disassemble the device often so that affect the performance of the anti-tamper button. Decreasing the power and increasing the broadcasting interval can extend the lifetime of BLE tags if it is used in a proper environment. The device will be shut-down for shipping. Please use the device on the suggested working temperature for safety. Minew will not be responsible for the damage caused by disassembling the product. 8. FCC Requirement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction 9. Quality Assurance The factory has already obtained the certification of ISO9001 Quality System. Each product has been strictly tested (testings include transmission power, sensitivity, power consumption, stability, aging, etc.). Warranty Period: 12 months from the date of shipping (Battery and other accessories excluded). 4 10. DECLARATION Rights Statement The contents of this manual belong to the Manufacturer of Minew Technologies Co., LTD, Shenzhen, and protected by Chinese laws and applicable international conventions related to copyright laws. The contents can be revised by the company according to the technological development without prior notice. Anyone, companies, or organizations cannot modify the contents and cite the contents of this manual without Minews permission, otherwise, Violators will be held accountable according to law. Disclaimer Minew team reserves the right to the final explanation of the document and product differences. The Minew group is not responsible for liability of property or personal injury with the wrong operation if users develop related products without checking the technical specifications of this manual. 11. Contact Information Manufacturer: Shenzhen Minew Technologies Co., Ltd. Phone: +86(755) 2103 8160 Email: info@minew.com Address: No.8, Qinglong Road, Longhua District, Shenzhen, China https://www.minew.com http://www.minewstore.com 5