FCC ID: 2ABU6-AR1 AoA Locator

Datasheet AoA Locator Light Up YourMap Model: AR1 AoA TECHNOLOGY OVERVIEW The Angle of Arrival (AoA) positioning technology is a typical ranging-based algorithm across some devices to sense the arrival direction of the transmitting node signal, and calculate the relative position or angle between the unknown node and the anchor node; then use the triangu-

lation or other methods to calculate the location of the unknown node. Compared to other technical types, AoA indoor positioning has advantages of higher precision, larger coverage, better penetration, and easier mainte-

nance at a lower cost. AoA LOCATOR The AoA Locator is the newest & high-accuracy indoor positioning locator designed by Minew for enterprise-level users, based on Minew AoA protocol and AoA positioning technology. It has up to 2152~4305 ft2 cover-age range and provides a sub-meter positioning service. Besides, providing faster and safer assurance in terms of data transmission even using in the harsh environment. KEY FEATURES

-High-Accuracy Location

-2152~4305 ft2 Coverage Range

-Real-time Data Transmission

-Long Service Life Than Ever APPLICATION CASES Technical Advantage Stable Chip Supply High-Accuracy Location Data Transmission Security Unlimited Frequency Resources Large Coverage Range Cost-Effective & Low-

Consumption Transmitter Receiver AoA Picture 1 Bluetooth LE AoA High-Accuracy Technology MARKET APPLICATIONS Industry 4.0 Smart Building Smart Warehouse Smart Retail Smart Healthcare Smart Sports Smart Healthcare Equipment Tracking Previous Record Tracing Appointment Navigation Personnel Security Medical Resources Allocation PoE Cable Smart Factory & Warehouse Work-ow Optimization Asset & Device Management Quality Control & Tracing Collision Security Reminding Smart Retail Shopping Habits Analyzing Indoor Route Navigation Anti-thief Tracking Proximity Marketing Smart Building Visitor-ow Management Ofce Access Control Indoor Route Navigation Space Utilization Work-ow Optimization Smart Sports Sports Analyzing Information Pushing Visitor-ow Tracking Devices Management TECHNICAL SPECIFICATIOS Basic Specifications Model Material Color AR1 ABS + PC Black Size (L * W * H) 24.5 * 224.5 * 75.7 mm 70 * 70 * 8 mm (Bracket) Weight 535 g Operating environment Indoor 224.5mm 75.7mm Coverage range (Ref. ) 2152 ~ 4305 ft2 (4 locators ) 224.5mm Installation Screw Bluetooth Specifications Bluetooth frequency Bluetooth modulation Bluetooth bandwidth Receiving sensitivity Antenna gain 2.4-2.4835GHz GFSK 1 Mbps, 2 Mbps

-96 dBm @1Mbps, 0.1 %BER Numbers of received broadcast packets About 1000 packets/ second (4 Locators) Scan coverage 2152 ~ 4305 ft2 (4 Locators) INSTALLATION & CAUTIONS Recommended Environment: Indoors Installation Options: With screws, as picture 6 shows Step Details:

First, installing the AR1 bracket on the ceilings with screws. Second, rotating the AR1 locator into the base (rotate after the short clamping position of the bracket aligning with the short clamping hole of the locator ). PRECAUTIONS The AR1 locator needs to point in the same direction, which can be identied by the longest slot on the locator shell. The cable sequence of both interfaces between the AR1 locators and gateway must be consistent to avoid data collection errors. The cable connecting the gateway and AR1 locators should be less than 20 meters to ensure normal transmission and location accuracy. Please contact our sales team if there are other installation requirements. QUALITY ASSURANCE The factory has already obtained the certification of ISO9001 Quality System. Each product has been strictly tested (tests include transmission power, sensitivity, power consumption, stability, aging, etc.). Warranty Period: 12 months from the date of shipping (Battery and other accessories excluded). DECLARATION Statement of Rights:

The contents of this manual belong to the Manufacturer of Minew Technologies Co., LTD, Shenzhen, and are protected by Chinese laws and applicable international conventions related to copyright laws. The contents can be revised by the company according to the technological development without prior notice. Anyone, companies, or organizations cannot modify the contents and cite the contents of this manual without Minew's permission, otherwise, Violators will be held accountable according to law. Disclaimer:

Minew team reserves the right to the final explanation of the document and product differences. The Minew group is not responsible for liability of property or personal injury with the wrong operation if users develop related products without checking the technical specifications of this manual. FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the F CC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This e quipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particu lar installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turni ng the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. CONTACT INFORMATION SHENZHEN MINEW TECHNOLOGIES CO., LTD.

+86 (755) 2103 8160 www.minew.com info@minew.com www.minewstore.com No.8, Qinglong Road, Longhua District, Shenzhen, China

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Item: AoA Locator Model No.: AR1 Version: 1.0 FCC ID: 2ABU6-AR1 Manufacturer: Shenzhen Minew Technologies Co., Ltd. Made in China

SHENZHEN MINEW TECHNOLOGIES CO., LTD. Authorization Company: SHENZHEN MINEW TECHNOLOGIES CO., LTD. Address: 3rd Floor, | Building, Gangzhilong Science Park, Qinglong Road, Longhua District, Shenzhen City, China Product Name: AoA Locator Model Number(s): AR1 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MICOM Labs on our behalf shall have the same effect as acts of our own.

' , Signature: Fie: J a0 Date: 2022/09/15 Name: Shain Xiao Title: Engineer Company: SHENZHEN MINEW TECHNOLOGIES GO., LTD.

SHENZHEN MINEW TECHNOLOGIES CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022/09/15 Subject; Request for Confidentiality FCC ID: 2ABU6-AR1 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market.

[x] Schematic Diagram Block Diagram

| Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s)

] User Manual

(|For 45 days, pursuant to Public Notice DA 04-1705. OFor S days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely,

) t Signature: i Ae Name: Shain Xiao Title: Engineer