nRF52805 module specification Small-sized nRF52805 Module MS46SF11 OEM/Integrators Installation Manual MS46SF11 is a compact size (15.8 x 12.0 x 2.0 mm), highly flexible, ultra-low power wireless BLE 5.0 Module based on nRF52805 SoCs; Its powerful 32-bit ARM Cortex M4 CPU, a 192kB flash memory, a 24kB RAM and integrating a 2.4 GHz transceiver can offer the perfect solution for Bluetooth connectivity. Features Frequency: 2400 to 2483 MHz Max. Output power: +4dBm Single power supply: 1.7 3.6V Range: up to 60 meters in open space Chip: nRF52805 (Nordic) GPIO Quantity: 6 192KB Flash and 24KB RAM (nRF52805) Module size: 15.8 x 12.0 x 2.0 mm ARM Cortex-M4 processor Metal shielding with marking UART communication protocol (Slave optional) AntennaPCB Operating Temperature range: -40 to 80 degree Celsius Application Medical devices Heart rate monitor Blood pressure monitor Blood glucose meter Thermometer Sport facilities Weighing machine Sports and fitness sensors Accessories 3D glasses and gaming controller Mobile accessories Remote controllers / Toys Electronic devices Cycle computer Certification FCC is coming soon CE is coming soon Copyright Minew 1 nRF52805 module specification Revision history Version Date 1.0 2020.6.5 Notes First edition Contributors Person of Approve Eddie Coral Copyright Minew 2 nRF52805 module specification Index Revision history.......................................................................................................................................................................... 2 1. Product introduction.............................................................................................................................................................. 4 1.1 Ordering information................................................................................................................................................... 4 2. Pin description........................................................................................................................................................................5 2.1 Pin assignment............................................................................................................................................................ 5 2.2 Pin definition.................................................................................................................................................................5 2.4 Mechanical drawing.................................................................................................................................................... 6 3.Electrical specification........................................................................................................................................................... 7 3.1 Absolute maximum ratings........................................................................................................................................ 7 3.3 Electronic characteristic............................................................................................................................................. 8 3.3.1 General radio characteristics.........................................................................................................................8 3.3.2 Radio current consumption (Transmitter).................................................................................................... 8 3.3.3 Radio current consumption (Receiver)........................................................................................................ 9 3.3.4 Transmitter specification.................................................................................................................................9 3.3.5 Receiver operation........................................................................................................................................ 10 3.3.6 RX selectivity.................................................................................................................................................. 11 3.3.7 RX intermodulation........................................................................................................................................12 3.3.8 Radio timing....................................................................................................................................................12 3.3.9 Received signal strength indicator (RSSI) specifications.......................................................................13 4.Electrical schematic............................................................................................................................................................. 14 5.Package information............................................................................................................................................................ 15 5.1 Package dimension.................................................................................................................................................. 15 5.2 Mark on metal shield................................................................................................................................................ 16 6. Reflow and soldering.......................................................................................................................................................... 16 7. Certification.......................................................................................................................................................................... 17 8. Notes & cautions................................................................................................................................................................. 18 8.1 Design notes..............................................................................................................................................................18 8.2 Layout notes.............................................................................................................................................................. 18 8.3 Installation and soldering.........................................................................................................................................19 8.4 Handling and storage ............................................................................................................................................. 19 8.5 Life support applications ........................................................................................................................................ 20 9. Disclaimer............................................................................................................................................................................. 20 10. Contact information...........................................................................................................................................................21 Copyright Minew 3 nRF52805 module specification 1. Product introduction MS46SF11 is a ultra small size (15.8 x 12.0 x 2.0 mm), highly flexible, ultra-low power wireless BLE 5.0 Module based on nRF52805 SoCs; Its powerful 32-bit ARM CortexTM M4 CPU, a 192KB flash memory, a 24KB RAM and integrating a 2.4 GHz transceiver can offer the perfect solution for Bluetooth connectivity. MS46SF11 can meet the most demanding applications, it allows faster time to market with high performance,low power management and reduced development cost. Also, its range is estimated up to 60 meters in open space. 1.1 Ordering information Ordering number Description MS46SF11-001 306030112, nRF52805-CAAA BT 5.0 Module, PCB Antenna, Reel pack Copyright Minew 4 nRF52805 module specification 2. Pin description 2.1 Pin assignment 2.1.1 MS46SF11 PCB Antenna 2.2 Pin definition Pin 2 to Pin 7 Pin 1 Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 ANT NC P0.21 P0.18 VCC GND P0.05 P0.04 P0.16 P0.12 SWDIO SWCLK NC Symbol Definition Description Connect pin for external antenna UART TX UART RX VCC GND CON_IND FIFO_FULL SLP BTDATA Serial wire debug clock input for debug and programming Serial wire debug I/O for debug and programming Copyright Minew 5 2.3 Block diagram nRF52805 module specification 2.4 Mechanical drawing 2.4.1 MS46SF11 PCB Antenna Unit: mm Tolerance: +/- 0.1, default Copyright Minew 6 nRF52805 module specification 3.Electrical specification the module are directly related to the Nordic semiconductor The electrical specifications of Specifications for the nRF52805 chipset. The below information is only the extract from nRF52805 specification. For more detailed information, please refer to the up-to-date specification of the chipset available on the Nordic semiconductor website 3.1 Absolute maximum ratings Supply voltages Note VDD VSS I/O pin voltage VI/O, VDD3.6 V VI/O, VDD>3.6 V Environmental WLCSP package Storage temperature MSL(moisture sensitivity level ) ESD HBM(Human Body Model) ESD HBM Class(Human Body Model Class) ESD CDM(Charged Device Model) Flash Memory Endurance Retention at 85 C Min. Max. Unit
-0.3
+3.9
-0.3
-0.3 VDD+0.3V 3.9V
-40
+125 0 1 3 2 1 V V V V C kV kV 10 000 10 write/erase cycles years Important: Maximum ratings are the extreme limits to which the chip can be exposed for a limited amount of time without permanently damaging it. Exposure to absolute maximum ratings for prolonged periods of time may affect the reliability of the device.35 Copyright Minew 7 3.2 Recommended operating conditions The operating conditions are the physical parameters that the chip can operate within. nRF52805 module specification Symbol Parameter Notes Min. Nom. Max. Units VDD Supply voltage, independent of DCDC enable 1.7 3.0 TR_VDD Supply rise time (0 V to 1.7 V) TA Operating temperature
-40 25 3.6 60 85 V ms C Important: The on-chip power-on reset circuitry may not function properly for rise times longer than the specified maximum. 3.3 Electronic characteristic 3.3.1 General radio characteristics fPLL,CH,SP PLL channel spacing fDELTA,1M Frequency deviation @ 1 Msps fDELTA,BLE,1M Frequency deviation @ BLE 1 Msps fDELTA,2M M Frequency deviation @ 2 Msps fDELTA,BLE,2M Frequency deviation @ BLE 2 Msps Symbol Description Min. Typ. Max. Units fOP Operating frequencies 2360 2500 MHz 1 170 250 320 500 7.0 15.4 4.6 MHz kHz kHz kHz kHz mA mA mA FskBPS On-the-air data rate 1000 2000 ksps 3.3.2 Radio current consumption (Transmitter) Symbol Description Min. Typ. Max. Units ITX,PLUS4dBM,DCDC TX only run current(DCDC,3V)PRF=+4 dBm ITX,PLUS4dBM TX only run current PRF=+4 dBm ITX,0dBM,DCDC TX only run current(DCDC,3V)PRF=0 dBm Copyright Minew 8 ITX,0dBM TX only run current PRF=0 dBm 10.1 nRF52805 module specification ITX,MINUS4dBM,DCDC TX only run current DCDC,3V PRF=-4 dBm ITX,MINUS4dBM TX only run current PRF=-4 dBm ITX,MINUS8dBM,DCDC TX only run current DCDC,3V PRF=-8 dBm ITX,MINUS8dBM TX only run current PRF=-8 dBm ITX,MINUS12dBM,DCDC TX only run current DCDC,3V PRF=-12 dBm ITX,MINUS12dBM TX only run current PRF=-12 dBm ITX,MINUS16dBM,DCDC TX only run current DCDC,3V PRF=-16 dBm ITX,MINUS16dBM TX only run current PRF=-16 dBm ITX,MINUS20dBM,DCDC TX only run current DCDC,3V PRF=-20 dBm ITX,MINUS20dBM TX only run current PRF=-20 dBm ITX,MINUS40dBM,DCDC TX only run current DCDC,3V PRF=-40 dBm ITX,MINUS40dBM ISTART,TX,DCDC ISTART,TX TX only run current PRF=-40 dBm TX start-up current DCDC,3V PRF=4 dBm TX start-up current PRF=4 dBm 3.3.3 Radio current consumption (Receiver) IRX,1M IRX,2M IRX,1M,DCDC RX only run current (DCDC, 3V) 1Mbps / 1Mbps BLE RX only run current (LDO, 3 V) 1Mbps / 1Mbps BLE IRX,2M,DCDC RX only run current (DCDC, 3V) 2Mbps / 2Mbps BLE RX only run current (LDO, 3 V) 2Mbps / 2Mbps BLE ISTART,RX,1M,DCDC RX start-up current (DCDC 3V) 1Mbps/1Mbps BLE ISTART,RX,1M RX start-up current 1Mbps/1Mbps BLE 3.3.4 Transmitter specification
.. . . . 3.6 7.8 3.2 6.8 2.9 6.2 2.7 5.7 2.5 5.4 2.1 4.3
.. . 4.6 10.0 5.2 11.2 3.5 6.7 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Symbol Description Min. Typ. Max. Units Symbol Description Min. Typ. Max. Units PRF Maximum output power 4.0 dBm Copyright Minew 9 nRF52805 module specification 4 PRFC PRFCR PRF1,1 PRF2,1 PRF1,2 PRF2,2 Symbol PRX,MAX PSENS,IT,1M PSENS,IT,2M RF power control range RF power accuracy 1st Adjacent Channel Transmit Power 1 MHz (1 Mbps ) 2nd Adjacent Channel Transmit Power 2 MHz (1 Mbps ) 1st Adjacent Channel Transmit Power 2 MHz (2 Mbps) 2nd Adjacent Channel Transmit Power 4 MHz (2 Mbps) 3.3.5 Receiver operation Maximum received signal strength at < 0.1% BER Sensitivity, 1Msps nRF mode mode ideal transmitter14 Sensitivity, 2 Mbps nRF mode ideal transmitter14 Sensitivity, 1 Mbps BLE ideal transmitter, packet length 37 PSENS,IT,SP,1M,BLE bytes BER=1E-315 PSENS,IT,LP,1M,BLE bytes BER=1E-416 Sensitivity, 1 Mbps BLE ideal transmitter, packet length 128 BER=1E-32 BER=1E-43 Sensitivity, 2 Mbps BLE ideal transmitter, packet length 37 PSENS,IT,SP,2M,BLE bytes proprietary mode) length<=37bytes _____________________________________ 24
-25
-50
-25
-50 0
-94
-91
-97
-96
-94 dB dB dBc dBc dBc dBc dBm dBm dBm dBm dBm dBm Description Min. Typ. Max. Units 1 Typical sensitivity applies when ADDR0 is used for receiver address correlation. When ADDR[1...7] are used
<=37bytesproprietary mode) for receiver address correlation, the typical sensitivity for this mode is degraded by 3dB. 2 As defined in the Bluetooth Core Specification v4.0 Volume 6: Core System Package (Low Energy Controller Volume) 3 Equivalent BER limit < 10E-04 4 Desired signal level at PIN = -67 dBm. One interferer is used, having equal modulation as the desired signal. The input power of the interferer where the sensitivity equals BER = 0.1% is presented. Copyright Minew 10 3.3.6 RX selectivity nRF52805 module specification Symbol Description Min. Typ. Max. Units C/I1M,co-channel 1Msps mode, Co-Channel interference C/I1M,-1MHz C/I1M,+1MHz C/I1M,-2MHz C/I1M,+2MHz C/I1M,-3MHz C/I1M,+3MHz 1 Msps mode, Adjacent (-1 MHz) interference 1 Msps mode, Adjacent (+1 MHz) interference 1 Msps mode, Adjacent (-2 MHz) interference 1 Msps mode, Adjacent (+2 MHz) interference 1 Msps mode, Adjacent (-3 MHz) interference 1 Msps mode, Adjacent (+3 MHz) interference C/I1M,6MHz 1 Msps mode, Adjacent (6 MHz) interference C/I1MBLE,co-channel 1 Msps BLE mode, Co-Channel interference C/I1MBLE,-1MHz 1 Msps BLE mode, Adjacent (-1 MHz) interference C/I1MBLE,+1MHz 1Msps BLE mode, Adjacent (+1 MHz) interference C/I1MBLE,-2MHz 1Msps BLE mode, Adjacent (-2 MHz) interference C/I1MBLE,+2MHz 1Msps BLE mode, Adjacent (+2 MHz) interference C/I1MBLE,>3MHz 1Msps BLE mode, Adjacent (3 MHz) interference C/I1MBLE,image Image frequency Interference -22 dB Adjacent
(1 MHz) interference to in-band image C/I1MBLE,image,1MHz frequency C/I2M,co-channel 2 Msps mode, Co-Channel interference C/I2M,-2MHz 2 Msps mode, Adjacent (-2 MHz) interference C/I2M,+2MHz C/I2M,-4MHz C/I2M,+4MHz C/I2M,-6MHz C/I2M,+6MHz 2 Msps mode, Adjacent (+2 MHz) interference 2 Msps mode, Adjacent (-4 MHz) interference 2 Msps mode, Adjacent (+4 MHz) interference 2 Msps mode, Adjacent (-6 MHz) interference 2 Msps mode, Adjacent (+6 MHz) interference C/I2M,12MHz 2 Msps mode, Adjacent (12 MHz) interference 9
-2
-10
-19
-42
-38
-48
-50 6
-2
-9
-22
-46
-50
-22
-35 10 6
-14
-20
-44
-42
-47
-52 dBm dBm dBm dBm dBm dBm dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Copyright Minew 11 nRF52805 module specification C/I2MBLE,co-channel 2 Msps BLE mode, Co-Channel interference C/I2MBLE,-2MHz 2 Mbps BLE mode, Adjacent (-2 MHz) interference C/I2MBLE,+2MHz 2 Mbps BLE mode, Adjacent (+2 MHz) interference C/I2MBLE,-4MHz 2 Mbps BLE mode, Adjacent (-4 MHz) interference C/I2MBLE,+4MHz 2 Msps BLE mode, Adjacent (+4 MHz) interference C/I2MBLE,6MHz 2 Msps BLE mode, Adjacent (6 MHz) interference C/I2MBLE,image Image frequency Interference Adjacent (2 MHz) interference to in-band image C/I2MBLE,image,2MHz frequency 3.3.7 RX intermodulation IMD performance, 1 Mbps, 5th offset channel, packet PIMD,5TH,1M length 37 bytes IMD performance, BLE 1 Mbps, 5th offset channel, packet IMD performance, 2 Mbps, 5th offset channel, packet IMD performance, BLE 2 Mbps, 5th offset channel, packet PIMD,5TH,1M,BLE length 37 bytes PIMD,5TH,2M length 37 bytes PIMD,5TH,2M,BLE length 37 bytes 3.3.8 Radio timing 6
-2
-12
-22
-46
-50
-29
-44
-33
-30
-33
-31 dB dB dB dB dB dB dB dB dBm dBm dBm dBm Symbol Description Min. Typ. Max. Units Symbol Description Min. Typ. Max. Units TTXEN,BLE,1M Time between TXEN task and READY event after channel FREQUENCY configured (1 Mbps BLE and 150 s TIFS) 140 s Copyright Minew 12 Time between TXEN task and READY event after channel tTXEN,FAST,BLE,1M FREQUENCY configured (1 Mbps BLE with fast ramp-up and 150 s TIFS)FREQUENCY configured (Fast Mode) tTXDIS,BLE,1M tRXEN,BLE,1M When in TX, delay between DISABLE task and DISABLED event for MODE = Nrf_1Mbit and MODE = Ble_1Mbit Time between the RXEN task and READY event after channel FREQUENCY configured (1 Mbps BLE) Time between the RXEN task and READY event after tRXEN,FAST,BLE,1M channel FREQUENCY configured (1 Mbps BLE with fast 40 ramp-up) tRXDIS,BLE,1M tTXDIS,BLE,2M tRXDIS,BLE,2M When in RX, delay between DISABLE task and DISABLED event for MODE = Nrf_1Mbit and MODE = Ble_1Mbit When in TX, delay between DISABLE task and DISABLED event for MODE = Nrf_2Mbit and MODE = Ble_2Mbit When in RX, delay between DISABLE task and DISABLED event for MODE = Nrf_2Mbit and MODE = Ble_2Mbit 3.3.9 Received signal strength indicator (RSSI) specifications Symbol Description Min. Typ. Max. Units RSSIACC RSSI Accuracy18 RSSIRESOLUTION RSSI resolution RSSIPERIOD RSSI sampling time from RSSI_START task RSSISETTLE RSSI settling time after signal level change nRF52805 module specification 40 6 140 0 4 0 2 1 0.25 15 s s s s s s s dB dB s s Copyright Minew 13 4.Electrical schematic nRF52805 module specification Copyright Minew 14 5.Package information 5.1 Package dimension nRF52805 module specification Details Reel-MS46SF11 Quantity(module) 850PCS Tape Weight 720g Single module Weight 0.66g Gross Weight 1021g Dimension W330mm T50.4mm Copyright Minew 15 5.2 Mark on metal shield nRF52805 module specification 6. Reflow and soldering Profile Feature Solder Paste Sn-Pb Assembly Sn63/Pb37 Preheat Temperature min (Tsmin) Preheat Temperature max (Tsmax) 100C 150C Preheat Time (Tsmin to Tsmax)(ts) 60-120 sec Average ramp-up rate (Tsmax to Tp) 3C/second max Liquidous Temperature (TL) Time (tL)Maintained Above (TL) Peak Temperature (Tp) 183C 60-90 sec 220-235C Average ramp-down rate (Tp to Tsmax) 6C/second max Time 25C to peak temperature 6 minutes max Pb-Free Assembly Sn96.5/Ag3/Cu0.5 150C 200C 60-120 sec 3C/second max 217C 30-90 sec 230-250C 6C/second max 8 minutes max Copyright Minew 16 nRF52805 module specification 7. Certification 7.1 CE Certification 7.2 FCC Certification 7.3 Environmental MS46SF11 module is being tested and is expected to be compliant against the EU-Radio Equipment standards. OEM integrator should consult with qualified test house to verify all regulatory requirements have been met for their complete device. MS46SF11 module is being tested and is expected to be compliant against the Federal Communications Commission standards. 7.3.1 RoHs MS46SF11 modules are in compliance with Directive 2011/65/EU, 2015/863/EU of the European Parliament and the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 7.3.2 Reach MS46SF11 modules listed below do not contain the 191 SVHC (Substance of Very High Concern), as defined by Directive EC/1907/2006 Article according to REACHAnnex XVII. As for the OEM integration:
Only OEM integrator have right to integrate this device under the following conditions:
Any other transmitter or antenna must not be co-located with the antenna and transmitter. The module shall be only used with the integral antenna(s)that has been originally tested and certified with this module. As long as the two conditions below are met,further transmitter testing will not be required.
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. However, the OEM integrator shall test their end-product for any additional compliance requirements with this module installed (for example,digital device emission, PC peripheral requirements, etc. ). If these conditions cannot be met (for example certain laptop configuration or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the final product shall not use the FCC ID of the module. In these circumstances, the OEM integrator shall be re-evaluating the end product(including the transmitter) and obtaining a separate FCC authorization. The OEM shall be verifying end product compliance with FCC Part 15, sub-part B limits for unintentional radiators through an accredited test facility. Copyright Minew 17 nRF52805 module specification 8..Notes & cautions We cannot assure that the specification has no errors and omission even though this specification is under collate and check strictly. This specification is under the protection of laws and regulations of copyright, please do not copy and duplicate at any form, or do not transmit part or full of this specification in any wire and wireless network in any form, or do not edit or translate to any other format, word, code, etc.
(1) It is critical to following the recommendations of this document to ensure the module meets
(2) The module should be placed at the edge of the circuit board as far as possible to keep away
(3) Antenna should be kept away from other circuits. It can prevent low radiation efficiency and the normal use of other circuits from being affected.
(4) The landing of components should be appropriate and that is better for reducing the parasitic inductance.
(5) Please refuse to supply voltage that is not within the range of specification.
(6) Please make sure the module or its surface may not suffer from the physical shock or 8.1 Design notes the specifications. from other circuits. extreme stress. 8.2 Layout notes To make sure wireless performance is at its best condition, please layout the MS46SF11 module on the carrier board as below instructions and picture.
(1) Placement of the antenna The antenna area of module shall lay clearance completely and should not be blocked by the metal. Otherwise it will have effect on antenna performance (As the picture indicated below).
(2) Placement of top-layer The placement of top-layer in carrier board shall be lay copper completely to reduce the signal line in carrier board or other interference.
(3) Clearance Copyright Minew The upper and below area of antenna (including the case) shall have 4mm or more than 4mm 18 clearance to reduce the influences for antenna. nRF52805 module specification
*The Grey area above is Carrier board. 8.3 Installation and soldering
(1) Please do not lay copper under the module antenna. It can prevent the influence of signal radiation and the transmission distance from being affected. 8.4 Handling and storage
(1) Due to the fact that CMOS components are included in the module, it is better to eliminate static electricity at any methods when transporting or working with the module. Moreover, it is strongly recommended adding anti-ESD components to circuit design to hinder damage from real-life ESD events. Anti-ESD methods can be also used in mechanical design.
(2) Please store the modules within -40 to +125 before and after installation and make sure the modules is away from the direct sunlight exposure for a long duration. Modules should be far away from humid and salty air conditions, and any corrosive gasses or substances.
(3) Please not to wash the module. No-Clean Paste is used in production. The metal shield may be oxidized by the washing process and may lead to chemistry reaction with No-Clean Paste. If modules goes through the washing process, functions of the module may not guaranteed. Copyright Minew 19 nRF52805 module specification 8.5 Life support applications
(1) The module is not design for life support device or system and not allowed to be used in destructive devices or system in any direct, or indirect ways. Minew is not responsible for compensation of any losses when applying modules under such application as described above.
(2) Minew shall not responsible for the customers products or application. 9. Disclaimer The factory has passed the ISO9001 quality management system, ISO14001 environmental management system and OAHS18001 occupational health and safety assessment . Each product has been rigorously tested (transmission power test, sensitivity test, power consumption test, stability test, aging test, etc.).
* NOTICES:
(1) The Bluetooth trade mark is owned by the Bluetooth SIG Inc. USA.
(2) All other trademarks listed herein are owned by their respective owners.
(3) All specifications are subject to change without notice.
(4) Please do not use this specification for produce, sell or illegal purpose without Minews authorization.
(5) Minew have right to interpret all the items above. Copyright Minew 20 nRF52805 module specification 10..Contact information Manufacturer: Shenzhen Minew Technologies Co., Ltd. Tel: 0086-755-2103 8160 Email: info@Minew.com URL: https://www.minew.com/
Address:
3rd Floor, Building I, Gangzhilong Science Park, Qinglong Road, Longhua District, Shenzhen 518109, China FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Integral PCB antenna with antenna gain 2.07dBi This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If any hardware modify or RF control software modify will be made by host manufacturer,C2PC or new certificate should be apply to get approval,if those change and modification made by host manufacturer not expressly approved by the party responsible for compliance ,then it is illegal. Copyright Minew 21 FCC Radiation Exposure Statement This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: 2ABU6-MS46SF1 Or Contains FCC ID: 2ABU6-MS46SF1 When the module is installed inside another device, the user manual of the host must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product.