URLwww.minewtech.com Tel0755-2103 8160 Mailinfo@minew.com 1 4. Open the T-Finder app, create an account and login in.
( blue LED flashes switch off) 3. Switch on the key tracker by pressing its button for 3-5 seconds until you hear it a tune beep, blue LED lights. 2. Enable Bluetooth, location access and camera on phone. 1. Download&Install T-Finder APP. User guide F6 bluetooth key Tracker Key tracker Key tracker 5. Click "Bind Devices" or "+" on the first screen and select your target device. 6. Name the key tracker and click the icon to change its image. URLwww.minewtech.com Tel0755-2103 8160 Mailinfo@minew.com 2 URLwww.minewtech.com Tel0755-2103 8160 Mailinfo@minew.com 3 Both the app and the Key Finder will alert you with sound when key tracker and phone is out of range(Disconnect). TURN ON Bidirectional Anti-loss Bidirectional Anti-lost Alarm Location Record on Map. 2. Click "Ring" in the app to find the key tracker with your belongings; Besides, on Location page, you can also search the 1. Press the button on the Key tracker to find the phone. Two-Way Finding Key tracker URLwww.minewtech.com Tel0755-2103 8160 Mailinfo@minew.com 4 Movement Alarm 2. Tap to change into front camera mode on APP, press the button on smart finder to take selfie. 1. Tap the camera icon to take photo. Selfie:
Key tracker Key tracker Me User Information, Do Not Disturb, Switch Maps, FAQs, Feedback, About Us, Logout and other operations. Warm reminding: It is very helpful to read FAQs before your operation. DECLARATION The contents of this user guide are subject to change without prior notice for further improvement. Minew team reserves the right to explain all the terms of this user guide. CONTACT Manufacturer: Shenzhen Minew Technologies Co., Ltd. Phone: +86 (755) 2103 8160 Email: info@minew.com Address:
3rd Floor, I Building, Gangzhilong Science Park, QingLong Road, Longhua District, Shenzhen 518109 China https://www.minew.com URLwww.minewtech.com Tel0755-2103 8160 Mailinfo@minew.com 5 FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.