Digital Broadcasting Device_S2 Digital Broadcasting Device Datasheet Model No.: S2 V1.0 Part #
S2 S2 Description Yellow, Bluetooth 5.0 Digital Broadcasting Device with Photo-transistor, pre-
flashed Beacon Plus software supports broadcasting iBeacon, Eddystone and sensor data simultaneously Bluetooth 5.0 Digital Broadcasting Device with Photo-transistor, detecting whether the environment is light or dark, pre-flashed MiniBeacon Plus software supports broadcasting iBeacon, Eddystone and sensor data simultaneously All Rights Reserved by MINEW 1 Digital Broadcasting Device_S2 The Digital Broadcasting Device S2 is the latest low energy Bluetooth 5.0 IoT sensor device. It can detect whether the environment is light or dark. The hardware is based on the ultra-low power consumption BLE chipset nRF52 series, it is designed for the commercial advertising, indoor location-based service and specialized for the asset management and tracking application. Moreover, if the special / customization firmware has MESH function, it can work on S2 Digital Broadcasting Device hardware smoothly. FEATURES
- IP65 waterproof
- Light sensor inside
- Bluetooth 5.0 chipset nRF52 series
- The max. 50 meters advertising distance
- 1 year battery lifetime at default settings
- Ultrasonic assembling technology S2 Digital Broadcasting Device CERTIFICATIONS
- iBeacon MFi License (iBC-14-00582)
- Bluetooth EPL Certification
- FCC Regulation (FCC Part 15, processing)
- CE Regulations (Included EN300328/301489/60950/62479, processing) ELECTRONIC PARAMETERS Item Case Color Battery Model Operation Voltage Transmission Circuit Transmission Range Light sensor Broadcasting Interval Antenna Accessories Net Weight Size Working Temperature Working Humidity Value Black, Yellow 3.0V 1.7-3.9V 6.5mA (Max.) 50 meters Photo-transistor 10 seconds 50ohm Double-sided adhesive 7.0g 52.6*23.7*5.3mm
-20~60 30~70%
Remarks Null 220mAh DC Tested at 0dBm transmission power Maximum Null Null On board / PCB Antenna 1pc, high strength Null Null Null Null All Rights Reserved by MINEW 2 Digital Broadcasting Device_S2 TECHNICAL SUPPORT Item Datasheet Version V1.01 2nd Development V2.0 File Name Updated Date S2 Digital Broadcasting Device Datasheet_1.01 2nd July, 2019 Digital Broadcasting Device Interface Document_2.0 12nd May, 2018 Configuration Tools
nRFConnect / BeaconSET+
PACKING INFORMATION Image 1 Details Quantity (S2) Net Weight Gross Weight Size Inner Box (foam) 100pcs per package box 0.7kg 0.8Kg 30.5 x 11 x 7.5 cm Carton 1000pcs per carton 7.0Kg 8.0Kg 32 x 23 x 40 cm APPDENDIX 1. J-LINK Programmer Kit;
2. Over-the-Air Function;
Please contact Minew sales team to ask more related information if needed. DECLARATION The contents of this datasheet are subject to change without prior notice for further improvement. Minew team reserves the right to explain all the terms of this datasheet. All Rights Reserved by MINEW 3 Digital Broadcasting Device_S2 FCC warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CONTACT Manufacturer: Shenzhen Minew Technologies Co., Ltd. Phone: +86 755 2103 8160 Email: info@minew.com Address: 3rd Floor, No. I Building, Gangzhilong Science Park, Qinglong Road, Longhua District, Shenzhen 518109, China https://www.minew.com
<END>
All Rights Reserved by MINEW 4